Samsung galaxy j5 firmware na usb. Installing official firmware on Samsung Galaxy J5 SM-J500F. Installing custom recovery TWRP Recovery v3.0 on Samsung Galaxy J5 SM-J500

Instructions for installing the official single-file firmware on the Samsung Galaxy J5 (SM-J500x).

Drivers and programs

Attention!

To install the official stock firmware on the Galaxy J5 and return the phone status (Settings > About device > Properties > Device status) to “Official” after switching from custom firmware and thereby returning the ability to receive updates over the air, just follow the instructions provided.

Installation instructions

Unpack the downloaded archive into a folder with Odin PC for convenience. The file in the ".tar" or ".tar.md5" format must be left, but the "SS_DL.dll" can be deleted.

Reset your device.
To do this, go to the settings section " Backup and factory reset", select the item " Reset data» > « Reset the device", enter the PIN code (if one is set) and click on the button " Delete everything" The phone will reboot.

Run Odin PC as administrator.

Put your device into download mode ( Download Mode).
To do this, you need to simultaneously hold down the Volume Down key, the Home button and the Power button. Then wait until the phone reboots and agree to the warning by pressing the Volume Up key.

In this state, connect the smartphone to the computer. In Odin the message “ COM».

Click on the “ AP» and select the firmware TAR archive.

Items " Auto Reboot" And " F.Reset Time" must be activated, A " Re-Partition"if active - must be disabled.

Click on the “ Start" The firmware installation process will begin.

At the end of the operation, if everything was successful, the message “All threads completed. (succeed 1 / failed 0)". The phone must be restarted manually by holding down the power button until the screen turns off. It may take up to 5 minutes for your device to boot up initially.
ATTENTION!
If the device does not boot for a long time or the data has not been reset, it must be performed from recovery.
To do this, you need to simultaneously hold down the Volume Up key, the Home button and the Power button. After downloading, select " Wipe data/Factory reset", and then - " Reboot system now" If after these steps the device also freezes when loading, you need to reflash it again.

[Official firmware] -

Model: SM-J500H
Model name: Galaxy J5
Version: Android 5.1.1
Changelist: 787812
Build date: 09/01/2015
Product Code: SER
PDA: J500HXXU1AOI1
CSC:J500HOXE1AOI1

If custom or official firmware for Samsung has not yet been added here, then create a topic on the forum, in the section, our specialists will quickly and free of charge help, including. with backup and manuals. Just don’t forget to write a review about your smartphone - this is extremely important. Firmware for Samsung Galaxy J5 SM-J500H/DS will also appear on this page. Please note that this Samsung model requires an individual ROM file, so you should not try firmware files from other devices.

What custom firmware are there?

CM - CyanogenMod
LineageOS
Paranoid Android
OmniROM
Temasek's

AICP (Android Ice Cold Project)
RR (Resurrection Remix)
MK(MoKee)
FlymeOS
Bliss
crDroid
Illusion ROMS
Pacman ROM

Problems and shortcomings of a Samsung smartphone and how to fix them?

If the Galaxy J5 SM-J500H/DS does not turn on, for example, you see a white screen, hangs on the splash screen, or the notification indicator only blinks (possibly after charging).
If stuck during update / stuck when turned on (needs flashing, 100%)
Doesn't charge (usually hardware problems)
Does not see the SIM card (SIM card)
The camera does not work (mostly hardware problems)
The sensor does not work (depends on the situation)

For all these problems, contact (you just need to create a topic), specialists will help for free.

Hard Reset for Samsung Galaxy J5 SM-J500H/DS

Instructions on how to do a Hard Reset on a Samsung Galaxy J5 SM-J500H/DS (factory reset). We recommend that you familiarize yourself with the visual guide called on Android. .

Reset codes (open the dialer and enter them).

*2767*3855#
*#*#7780#*#*
*#*#7378423#*#*

Hard Reset via Recovery

Turn off your device -> go to Recovery
"wipe data/factory reset"
“yes - delete all user data” -> “Reboot System”

How to log into Recovery?

hold down Vol(-) [volume down], or Vol(+) [volume up] and the Power button
A menu with the Android logo will appear. That's it, you are in Recovery!

Reset settings on Samsung Galaxy J5 SM-J500H/DS You can do it in a very simple way:

Settings->Backup and reset
Reset settings (at the very bottom)

How to reset a pattern key

How to reset your pattern key if you forgot it and now you can’t unlock your Samsung smartphone. On the Galaxy J5 SM-J500H/DS, the key or PIN can be removed in several ways. You can also remove the lock by resetting the settings; the lock code will be deleted and disabled.

Reset graph. blocking -
Password reset -

For the current generation of people, the smartphone has become an indispensable assistant and an extremely useful device that combines hundreds of different functions. Taking a photo, counting the number of ingredients, setting reminders, checking the weather, reading the news, chatting with friends - this is not a complete list of everything that modern smartphones are capable of. Sometimes we simply forget that they do not last forever and are subject to gradual wear and tear.

Smartphones running the Android operating system have long filled the whole world with their diversity. Their software code is open and ready to be edited or improved. While using such devices, there are times when the software component malfunctions and the smartphone stops working properly. To solve the problem, a simple reset to factory settings may not be enough - you need to flash the Samsung Galaxy J5 (2016) SM-J510H/FN/DS.

Fortunately, manufacturers of mobile equipment and simply enthusiasts have found dozens of ways to change the firmware for all Android devices without exception. The process will take a few minutes and the smartphone will come to life, starting its daily work with renewed vigor. The AndroGoo website has prepared detailed instructions on how to flash the Samsung Galaxy J5 (2016) SM-J510H/FN/DS.

What do we need?

Device charged at least 50% (if possible).
Original USB cable.
latest version.
Latest firmware. (Samsung official portal, for easy downloading you should register):

Single file: Download Android 6.0.1

Multi-file: WITH sway Android 6.0.1

If a new OS version has been released for your smartphone or the one you need is not in the instructions, please let us know in the comments below the post.

Firmware process for Samsung Galaxy J5 (2016) SM-J510H/FN/DS

If Kies was installed on your computer, remove it.
Download and install for Samsung smartphones and tablets.
Download and install the latest version.
Reboot the computer.
Unpack Odin onto your desktop. In the same folder we extract the firmware files from the previously downloaded archive.

On your smartphone go to “ Settings«, « Developer Options"(if there is no such item, go to " About the phone" and click many times on " Build number"), turn on " USB Debugging" And “Unlocking, provided. production".

We transfer the smartphone to Download Mode. To do this, turn it off completely, hold down the buttons at the same time Home+Power+Volume down.
After the screen appears with the message Warning, confirm the selection by pressing the button Volume up.

The phone has entered download mode.

Let's launch Odin on behalf of the administrator.

In this state, connect the device to the computer using a USB cable (exclusively USB 2.0) so that flash Samsung Galaxy J5 (2016) SM-J510H/FN/DS. If in the ODIN window the field ID:COM turned blue, like in the screenshot below, everything is fine - you can continue. If not, reinstall the drivers and restart the computer.

Files that can be found in the archive with the firmware

The picture shows the names of files that may be in the archive with the firmware and indicates where to insert them in the Odin window.

If there is only one file and takes up a lot of space, insert it into the field PDA/AP. This is the firmware. Other files according to field names.

In the appropriate fields on the right, select the firmware files, based on the example above. IMPORTANT! Only checkboxes should be checked Auto Reboot And F. Reset Time.

This is what the program window looks like ready for firmware:

Click on START and wait for the firmware process to finish. At the same time, it is strictly forbidden to disconnect the smartphone from the computer and touch the USB cable. The whole procedure will take a few minutes - the exact time depends on the power of the PC.

Once finished, the device will reboot itself. We disconnect it from the PC and start using the latest firmware.

Instructions for flashing the Samsung Galaxy J5 SM-J500 smartphone to the new official or custom firmware. Obtaining Root superuser rights on Samsung Galaxy J5 SM-J500, installing custom recovery TWRP Recovery.

How to flash Samsung Galaxy J5 SM-J500? In order to install new firmware on your smartphone, you first need to download several files to your PC:

Download Official firmware for Samsung Galaxy J5 SM-J500 – J500HXXU1APA5 (Android 5.1.1)

Before flashing your smartphone's firmware, you need to decrypt it.
To remove the lock from the Samsung Galaxy J5 SM-J500, you need to disable the reactivation lock. Go to “Settings” - “Lock screen and protection” - “Find phone” and disable “Activation Lock.” Before and after the firmware update procedure, you need to do a general reset of the device to factory settings to avoid all sorts of errors and interface slowdowns.
When performing this procedure, all your data and files will be permanently deleted.

Option 1: On the device, open “Settings” > “Backup and reset” > “Account” > “Reset data” > “RESET DEVICE” and click “Delete everything”
Option 2: Turn off the device, press and hold the “Volume Up”, “Home (Central)” and “Power” buttons and after a few seconds the “Recovery” menu will appear. In the “Recovery” menu, select “Wipe data/factory reset” -> “Yes – delete all user data”, deleting all user data will begin. After the process is completed, select “Reboot system now” and the device will begin to reboot.

You can skip this step, but remember! If you do not reset the data, after the update, “lags” and unstable operation of the device as a whole may appear due to the tails of the previous firmware.

After you have downloaded everything, unpack the archive with the driver for the Samsung Galaxy J5 SM-J500 and install it. Then unpack the archive with Odin and the firmware.
Run the Galaxy J5 Odin firmware program as administrator. To do this, hover over Odin and right-click and select “Run as administrator”, then click “Yes”.

After launching Odin, arrange the firmware files in the following order:
The file BL……….tar.md5 is inserted into the “BL” field
The AP……….tar.md5 file is inserted into the “AP” field
The file CP……….tar.md5 is inserted into the “CP” field
The CSC file……..tar.md5 is inserted into the “CSC” field

We check that the “checkmarks” are only in the “Auto Reboot” and “F. Reset Time"

We put the Samsung Galaxy J5 SM-J500 phone into firmware mode. To do this, turn off the phone and then press and hold the “Volume Down”, “Home” and “Power” buttons and after the menu with a yellow triangle appears, press the “Volume Up” button
We connect the smartphone using the supplied USB cable to the PC and in the Odin program, the inscription “COM” should appear in the upper left corner, highlighted in blue, then press the “Start” button.

Note: If for some reason your PC does not recognize your device, try reinstalling the driver and/or try other USB ports.

The smartphone firmware process has started. After successful firmware, the device will reboot automatically and the message “Finish” will appear in the Odin program. That's all!

Installing custom recovery TWRP Recovery v3.0 on Samsung Galaxy J5 SM-J500

Go to the phone settings and enable developer mode (settings > about device > software information and click on the “build number” line 7 times).
Then go to Settings > Developer Options and activate two options – “usb debugging” and “unlock pre-installed... OEM” - if you don’t do this item, the phone may not start - you will have to restore the stock firmware!!!

Download the custom recovery itself (recovery) twrp_j5.tar
We launch the Odin flasher program as an administrator (if you don’t have it, download it above) and flash the archive. In the AP field, first uncheck “Auto-reboot”! Without turning the device into working mode, go straight from the Download mode to Recovery by holding down three buttons (volume up + home + power button. When the Samsung message appears, release the buttons).

Installing custom firmware on Samsung Galaxy J5 SM-J500

To install custom firmware on your Samsung Galaxy J5 SM-J500 phone, you must have custom recovery TWRP Recovery, if you don’t have it, see the point above.

Download to your PC any custom firmware that you like, for example – Nova_Stock_Rom_J5, or Slim-Stok_ROM Galaxy J5. Then copy the firmware file to the phone's memory. Then turns off the smartphone and boot into custom recovery TWRP Recovery (with the phone turned off, hold down the power buttons + volume up button + HOME)
And through TWRP Recovery install the firmware file:

Go to Wipe and select Advanced Wipe
Check the boxes: “Davlik Cache”, “System, Data”, “Cache”, “Android Secure”.
Doing “Swipe to Wipe”
Go to Install -> Select the memory where the custom firmware is located, and select Swipe to Confim Flash, the installation will begin
After installation in recovery, select the Reboot -system item and the device will begin rebooting. Ready! You have successfully flashed custom firmware! reboot your smartphone.

Detailed, step-by-step instructions on how to flash a Samsung Galaxy J5 2016 SM-J510 smartphone with new official or custom firmware. Obtaining Root superuser rights on Samsung Galaxy J5 2016 SM-J510, installing custom recovery TWRP Recovery.

Installing the official firmware on the Samsung Galaxy J5 2016 smartphone using the Samsung Odin service program. In order to install new firmware on your smartphone, you first need to download several files to your PC:

Download the latest Official Firmware for Samsung Galaxy J5 2016 SM-J510FN

Official service firmware for Samsung Galaxy J5 (2016) SM-J510FN android 6.0.1

Before flashing your phone's firmware, you first need to decrypt it.
To remove the lock from the Samsung Galaxy J5 2016 SM-J510, you need to disable the reactivation lock. Go to “Settings” - “Lock screen and protection” - “Find phone” and disable “Activation Lock.” Before and after the firmware update procedure, you need to do a general reset of the device to factory settings to avoid all sorts of errors and interface slowdowns.
When performing this procedure, all your data and files will be permanently deleted.

Option 1: On the device, open “Settings” > “Backup and reset” > “Account” > “Reset data” > “RESET DEVICE” and click “Delete everything”

Option 2: Turn off the device, press and hold the “Volume Up”, “Home (Central)” and “Power” buttons and after a few seconds the “Recovery” menu will appear. In the “Recovery” menu, select “Wipe data/factory reset” -> “Yes – delete all user data”, deleting all user data will begin. After the process is completed, select “Reboot system now” and the device will begin to reboot.

You can skip this step, but remember! If you do not reset the data, after the update, “lags” and unstable operation of the device as a whole may appear due to the tails of the previous firmware, and recently, before completely resetting the smartphone, you also need to delete your Google account, otherwise the smartphone may be blocked.

After you have downloaded everything, unpack the archive with the driver for Samsung A5 2017 and install it. Then unpack the archive with Odin and the firmware.
We launch the program for flashing Samsung J5 2016 Odin as administrator. To do this, hover over Odin and right-click and select “Run as administrator”, then click “Yes”.

We check that the “checkmarks” are only in the “Auto Reboot” and “F. Reset Time"

We put the Samsung J5 2016 phone into firmware mode. To do this, turn off the phone and then press and hold the “Volume Down”, “Home” and “Power” buttons and after the menu with a yellow triangle appears, press the “Volume Up” button
We connect the smartphone using the supplied USB cable to the PC and in the Odin program, the inscription “COM” should appear in the upper left corner, highlighted in blue, then press the “Start” button.

Note: If for some reason your PC does not recognize your device, try reinstalling the driver and/or try other USB ports.

The smartphone firmware process has started. After successful firmware, the device will reboot automatically and the message “Finish” will appear in the Odin program.

Installing custom recovery TWRP Recovery on Samsung Galaxy J5 2016 SM-J510

And so let's start installing custom recovery on Samsung j5

If you have not yet installed Samsung drivers on your PC, download and install them. Then connect your smartphone to your computer using a standard USB cable. After the PC recognizes the phone, additional drivers and updates will be installed automatically.

We will need the Odin 3 program, download Odin

Then download the custom TWRP recovery for Samsung j5 2016 – TWRP recovery SM-J510 (J510f, J510H, J510FN

Turn off your smartphone, and then (with it turned off) press and hold the “Volume Down” + “Power” + home key until the phone boots into Odin mode (Download Mode). You will see a warning, confirm your desire to boot into this mode by pressing the “Volume Up” key.

With your phone in Odin Mode, connect it to your PC using a standard USB cable.

Run the Odin 3 flasher program on your PC as an administrator

In the AP line, indicate the path to the previously downloaded file with custom recovery j5 TWRP Recovery with the extension “.img.tar” and select it

Uncheck “auto reboot” and press start (the phone should be flashed, flashing time should not be more than 30 seconds, the result should be like this (succeed 1/ failed 0);

We do not touch the Smartphone until the firmware process is complete; usually the firmware does not last longer than 30 seconds.

Without turning the gadget into working mode, directly from the Download mode we go to the newly installed TWRP Recovery by holding down three buttons (volume up + home + power button, when the Samsung message appears, release the buttons).

All! We rejoice.

Installing custom firmware on the Samsung Galaxy J5 2016 SM-J510 smartphone

To install custom firmware on a Samsung Galaxy j5 phone, you must have custom recovery TWRP Recovery, if you don’t have it, see the point above.

Download to your PC any custom firmware that you like, for example:
LightTM ROM_1.1.5_J510 android 6.1.1

Then copy the firmware file to the phone's memory and turn off the smartphone. After which you need to boot your smartphone into custom recovery TWRP Recovery (with the phone turned off, hold down the power button + volume up button + HOME)

And through TWRP Recovery you install the modified firmware file for j510

Ready! You have successfully flashed custom firmware! reboot your smartphone and use it with pleasure (without paying attention to the bugs of the custom firmware)