Prestigio multipad 4 firmware 4pda. Prestigio updates the firmware of a number of tablets and e-readers. Installing custom firmware

The Prestigio brand tablet is a fairly inexpensive device running Android. Despite all its advantages, at certain moments it begins to slow down during operation. One solution to this problem is to roll back to factory settings and remove all installed applications. However, this does not always help. In this case, you will have to reinstall the system. But how to reflash a Prestigio tablet? Let's try to answer this question.

How to reflash the Prestigio Multipad tablet

When starting to reflash your Prestigio Multipad tablet, you will first need to check its build version. To do this, select “Settings”, go to the “About tablet” tab and click on “Build number”. Why is this being done? In order for the device to maintain its functionality. That is, you can only install a system that at least matches the build number. If you use a firmware version lower than the one installed on the device, then it will simply fail.

The next step is to go to the manufacturer’s official website. There are many firmware files for different devices. You need to choose the one that is suitable for your specific Prestigio, taking into account the above condition. Then this file is downloaded.

Having received the document, you need to unpack it into the appropriate folder on your computer. This file contains the following:

• version for 64-bit system;
• version for 86-bit system;
• build image;
• management;
• a utility that allows you to reflash the tablet.

Now it’s time to work with the device itself. First you need to fully charge it, turn it off and remove the memory card from the slot. The next step is to hold down the “-” button on the volume control and simultaneously press the “ Reset» on the back of the device. This can be done with a needle.

After this, while continuing to hold down the volume down key, the tablet is connected via a USB cable to the computer. The following message will appear on the monitor in the corner of the screen: Device software was not installed" If this information is not displayed on the computer screen, you should repeat the above steps, changing the USB port.

As soon as this message appears, go to the computer’s device manager by selecting “ Computer - right button - Properties - Device Manager" At this point you need to find the section “ Other devices" It displays a yellow icon «!» . By clicking on it with the left mouse button, select the item “ Driver" And "Update" Then simply carry out the actions suggested by the system.

Depending on which Windows system is installed (32- or 64-bit), the corresponding path to the folder “ Drivers_x32" or " Drivers_x64" After clicking on " Install driver"A new section appears in the task manager" RK29 Device».

The tablet disconnects from the computer.

On the last one the utility is launched RKBatch Tool, located in the Tool folder. Then the path to the firmware file is specified. Next, the tablet is connected to the computer again. The green indicator at the bottom of the utility should light up. If this does not happen, the tablet should be connected to a different USB port.

At the end, press the button Upgrade" When the utility reports that the operation was successful, the tablet can be disconnected and turned on.

You may also be interested in reading the articles:

How to reflash Prestigio Multipad 4 tablet

Reflashing the Prestigio Mutlipad 4 tablet is no more difficult than stated above. To do this, you also need to download the firmware file, which is sent to the root directory of the SD card. Then he makes money «+» on the volume key and the power button. Both of them are held for about 3 seconds. After the green robot appears on the screen, you need to press the power button again. In the recovery menu to go to “apply update from sdcard” need to take advantage «-» on the volume key. Selectable by button «+» . In the same way you should select update.zip.

After the update is complete, just click "Reboot system now."

Conclusion

Reflashing a Prestigio brand tablet is a task that is more time consuming than the effort put into it. The main thing is to always remember that the firmware file must match the device model and build number.

Prestigio Multipad 4 firmware video

Even if any software glitches occur, they are not going to give up their favorite gadget. They are satisfied, first of all, with the affordability of the device. Read about how to flash or reflash your Prestigio Multipad tablet.

Read about how to flash or reflash your Prestigio Multipad tablet correctly and efficiently

It is also accessible for maintenance, all settings and important processes are performed extremely simply, so there is no need to run to workshops and service centers or turn to advanced friends for help.

By the way, parents, taking into account these advantages, purchase a Prestigio tablet for their children. Indeed, why overpay for a famous brand if you can get a good device at a very reasonable price.

Unfortunately, budget tablet options are sometimes ready to present “surprises”. In Prestigio Multipad, the firmware is often damp, so you have to think about replacing it.

The easiest way out if a problem arises is to contact a service center. The specialists of any of them will quickly help you, because they know exactly how to reflash the Prestigio Multipad tablet.

But you will have two new problems. Firstly, you will have to set aside time for trips to the service center, and secondly, you will have to use your financial reserve, because none of the technicians will install the firmware for free.

If you are persevering, have an understanding of the specifics of the OS and the operation of various software, you can take a risk and do everything yourself.

To ensure that the result does not disappoint, read the instructions, Prestigio Multipad.

Preparatory stage

First you need to download everything that is required during the firmware process.

In order for the tablet to be successfully connected to the computer, you need not only a USB cable with which the physical connection is made, but also drivers that allow the PC to recognize the connected tablet.

In the search bar, enter the name of your tablet and indicate that you want to download drivers. The search engine will find several offers, all you have to do is choose a resource that inspires confidence.

After downloading the drivers, do not forget to install them. By the way, if it’s still difficult for you to install drivers yourself, use the program RK_DriverAssitant. She will do everything for you, not only correctly, but also surprisingly quickly.

Find the program on the Internet RKBatchTool for installation on PC. This software acts as an essential tool that can be used on the “damaged” tablet.

It is useful to foresee in advance the need to eliminate memory deficiencies. A special set of files helps with this Format NAND fix, archived.

On your PC, create a new folder and give it a name. It is into this that you unpack the archive with CWM Recovery, which you downloaded in advance.

Take your tablet, turn it off, hold down the volume up button, connect it to your PC.

Your computer will detect the new device and offer to install drivers. Specify the path to the drivers that you downloaded to your PC during the preparatory work.

After successful installation of the drivers, the PC will register that it sees your device, then you can go to the folder with the CWM Recovery archive.

Find the startup file, it is always accompanied by the extension “exe”, click on it.

You need to launch ROM Manager, and then select “Recovery Setup” in the initial window

In the window that opens, find the Recovery line, next to it there will be a checkbox, check it.

A new line “Found RKAndroid Loader Rock Usb” will immediately appear at the bottom.

Now find the button that says “Flash ROM” and click on it. The process starts, and after a couple of seconds it will be completed successfully. Your tablet will signal this as it will reboot.

All that remains is to go into recovery. To do this, simply turn on the device by holding down the volume up button as before.

Installing official firmware

Users are therefore disappointed that it suddenly disappeared. Fortunately, you can restore it by first downloading and saving it on your PC.

Turn off the tablet, connect it to the PC in the same way as when installing drivers. The computer will confirm the connection of the device, then run the utility RKBatchTool, uploaded at the preparatory stage.

The utility will ask you to specify the path to the saved firmware. Fulfill this request, having figured out which folder you saved it in. Now all you have to do is click on the Restore button and then just watch how the utility restores the firmware.

When finished, the tablet will reboot. Now you can disconnect it from your PC, turn it on and enjoy the updated work.

Installing custom firmware

You can also meet users who categorically deny reinstalling the official firmware, being dissatisfied with some of its glitches.

For this reason, you can install so-called custom firmware. Of course, you also need to find it and download it in advance.

Installing custom firmware will be identical to installing the official version if it is downloaded in an img image.

In front of you detailed step-by-step instructions on how to flash the Prestigio MultiPad 4 Quantum 7.85 PMP5785C 3G tablet. Our editors have chosen the most suitable method for flashing this Prestigio model. If this instruction does not give any results try flashing using another method: TWRP Recovery, ROM Manager, Fastboot or classic OTA.

Warning! After flashing the device, all your data from the internal memory will be erased, so to save your contacts, settings and applications, first save all data from the tablet.

Installing the system using CWM Recovery 1. Charge the flashed tablet at least 80%. 2. We save all data that cannot be lost from a flash drive, SIM card and tablet memory. The SIM card (if any) can be removed. 3. We place the necessary firmware in the tablet’s memory. The firmware file must be in archive format zip. You can select and download the firmware. 4. All Prestigio tablets have Recovery from the manufacturer, so we change it to ClockWorkMod Recovery. We do this according to the following instructions: Install the application from Google Play on your tablet. Launch it and grant Root rights. If there are no root rights on the tablet, we get them using . In the list of options, select “CWM Recovery”. Then the application will show a list of available Recovery. In the example, Rashr showed 2 options: ClockworkMod with support for taps on the screen and the classic version (controlled by the volume and power buttons). You will be prompted to download. Click Yes. Then the CWM Recovery image for the tablet will begin downloading. A notification will appear that the firmware was successful and you now have a modified recovery installed. We immediately go into it, to do this, click “Yes”. Ready. If you have already installed ClockworkMod Recovery, then simply enter it by pressing for 3-5 seconds any of the combinations: - Volume up + power button - Volume down + power button - Volume up/down + power button + "Home" - Volume up + volume down + power button 5. Movement in the Recovery menu is carried out using the volume buttons, and confirmation of the choice with the power button. Before installing the firmware, you must first do a factory reset. Therefore, select the item in the menu wipe data/factory reset.
6. Next, simply confirm that you agree to reset: Yes – Wipe all user data.
7. Now in the main menu of Recovery select install zip.
8. After that select Choose zip from /sdcard.
9. Navigate to the folder where you saved the firmware zip file and select it.
10. A confirmation message will appear. Select Yes – Install....
11. The firmware installation process will begin and at the end the message will appear Install from sdcard complete. The firmware is finished. We return to the main menu of CWM Recovery and reboot the tablet. For this we choose reboot system now.
12. Ready. The tablet will start loading from the already installed firmware. Other materials

Presigio has prepared several updates for its devices at once. The update will be designed to add an application for working with the company's MultiStore store to the device software.

Of course, the list of changes is not limited to this alone. There was also a lot of bug fixing - a number of minor problems were fixed. Almost every device received minor individual software changes.

The firmware update will be available for the following devices: MultiPad 4 Diamond 7.85 3G, MultiPad 4 Diamond 10.1 3G, MultiPad 4 Quantum 10.1 3G and MultiReader Stream 5574. The latest device will receive completely new software. The update is available both “over the air” and directly via a PC. You can find the firmware on the company's official website.

In order for the update to download automatically, you just need to go to the device settings, select the “About tablet” and “System update” items there. Afterwards all you have to do is click on the “Check for updates” button. Next you need to follow the prompts that appear on the screen.

In order to update the tablet firmware manually, you will need to download it from the official website, unpack the resulting archive and follow the instructions contained in the attached manual.

Download firmware for MultiPad 4 Diamond 7.85 3G

Download firmware for MultiPad 4 Diamond 10.1 3G

Download firmware for MultiPad 4 Quantum 10.1 3G

Download firmware for MultiReader Stream 5574