We connect the iPhone to the computer. Connecting iPhone to computer in various ways

Today, iPhones are incredibly popular. With all the capabilities of this modern mobile device, many of its users at some point wonder how to connect an iPhone to a computer. After all, sooner or later there is a need to download multimedia to the iPhone or you need to save photos taken on the phone, download a movie, music, etc.

How to connect an iPhone to a computer using a USB cable

The procedure for connecting a phone to a computer via a USB cable is familiar to almost everyone. There are no special changes or exceptions for the iPhone, but it is still not always possible to connect or certain difficulties arise.

All the information presented below is intended so that you know how to properly connect an iPhone to a computer and what errors there may be when connecting.

As a rule, a USB cable should be included with the iPhone itself. In order for data transfer to be carried out quickly and uninterruptedly, the connector on the computer’s USB port must be at least 2.0 (standard). A USB cable connects this same connector on the computer and the iPhone.

The very first trouble that you may encounter when connecting is, such as lost USB port settings, you need to try using a different USB connector or cable.

If your computer completely refuses to see the device, check the cable for possible damage, this may be the cause of all the problems.

When the connection is successful, go to “My Computer”. The iPhone appears on the computer as a digital camera. Now you can freely move your data from your phone to your computer.

To take full advantage of the exchange of information via a computer, it becomes necessary to synchronize the iPhone with the computer. iTunes will help you with this. This program will help you install games, download photos, books, music, videos and other applications.

Other problems can also prevent you from quickly connecting your iPhone to your computer via a USB cable. Even a slight time difference between your phone and computer can cause problems that show up as: MobileDeviceHelper or SyncServer.

This can be easily fixed by setting the correct, identical time in the settings of your computer and iPhone.

The connection may fail due to a SIM card that does not meet the requirements; the connection will result in an error message. In this case, you need to enable offline mode or remove the card from the phone.

Be careful and you will succeed. Do not forget about the correct use of your iPhone; you cannot disconnect your phone from the computer during synchronization.

If you urgently need to turn off your phone, and data synchronization has not yet completed, you need to finish the work by pulling the slide, and only after that you can disconnect the iPhone from the computer.

Be careful with your computer. Before connecting your iPhone to your computer, check the second one for malware, especially if you are not connecting to your own computer.

Happy connection!

iPhone owners are often faced with the need to connect their device to a computer. For example, to save photos, videos, contacts to your hard drive. It’s also easier to purchase various applications (music, books, movies, games, themes, screensavers and much more) on your computer. And only then download it to your phone. But first you need to connect it.

Connecting with a cable via USB port

A USB cable is usually included in the iPhone package. It is also necessary that the computer has a 2.0 connector. It won't work after 1.0.

The connected iPhone is displayed in the list of devices with a video camera icon. If the icon appears, one option is already available: you can take photos and videos from your phone to your hard drive.

In order to download programs, toys, music and other applications from the network and install them on your phone, you need to synchronize the devices with each other. To do this, you will need iTunes, which can be downloaded from the Apple website. After installing it, you need to get an identifier and use it to download applications through Apple stores (available in the program).

Possible problems

This operation does not always go smoothly. There are such situations:

A message appears that you have the wrong SIM card. In this case, you can switch your smartphone to airplane mode or simply remove the card.

MobileDeviceHelper or SyncServer error with message that the application will be closed. This can happen if the time or time zone on your phone and computer are set differently. You need to check which device is at fault and correct the error.

The connection is unstable. The problem may be a faulty connector, cable, or incorrect settings. Try connecting your iPhone to a different connector or changing the cable.

Wi-Fi synchronization

First you need to connect your iPhone to your computer via USB.
When it appears in the list of devices, open “Browse”, “Sync over Wi-Fi”.
If both devices are connected to a common Wi-Fi network, the iPhone will appear in iTunes and, accordingly, the ability to synchronize will appear. Synchronization can occur automatically if the program is open and the phone is connected to a power source.
When the iPhone appears in iTunes, you need to select the desired synchronization options on the appropriate tab. Click "apply".

Required parameters

In this case, the following conditions must be met:

Comparison of methods for connecting iPhone, iPod Touch and iPad to a computer

Possibilities	USB	WiFi
Synchronization with computer	+	+
Firmware recovery	+	-
Firmware update	+	-
Creating a Backup	+
Restoring from a backup	+	-
Installing and removing applications from the App Store	+	+
Download music, videos, TV shows, ringtones	+	+
Unloading music, videos, TV shows, ringtones from the device memory	file manager	file manager
Charges the battery	+	-
Drains battery	-	+
Data transfer rate	+	-
Easy connection setup	+	-
Radius of action	-	+
Additional accessories required	+	-
Occupies free computer ports	+	-

As you can see, each method (USB cable or Wi-Fi) has its own disadvantages and advantages. To solve individual problems, you can use the most convenient one: a Wi-Fi connection allows you to “share” a wired Internet connection to your iPhone; you can restore or update the firmware using a USB cable.

If you are unable to connect your device to your computer via Wi-Fi, the PC does not “see” the iPhone when connected via USB, or problems arise, write to us in the comments, we will try to help you.

iPhones are not like standard storage devices. It can be connected to a computer via a USB port and used like a regular flash drive: transfer photos, music and videos, and view the footage. But this is not the full potential of the device. If you synchronize it with a PC and use a special program, you can download applications, books, music albums of your favorite groups, cut ringtones, save a backup copy of your data, reset settings, listen to the radio, watch TV shows, shop in the Apple utility store, edit your account details. And this is only a small part of the gadget's capabilities. Figure out how to connect your iPhone to your computer via iPhone to take advantage of all these functions.

To fully work with the iPhone, you need to download certain software to your PC. It is on the official Apple website. Needed to pair an iPhone using both USB and Wi-Fi. If you plan to use Apple gadgets, these utilities must be installed.

iCloud. Network storage. Provides shared access to files, contacts, mail, calendar, notes, friends list. If you install the application on all your gadgets, they will be able to exchange data directly. You can also access the storage through a browser - to do this, open the iCloud.com page.
iTunes. File manager and main service for synchronizing iPhone and PC. Without it, it is impossible to figure out how to connect an iPhone to a computer. This program is used to control the gadget, download programs and files to it. With its help, you can buy content in the AppStore, activate gift cards and send them to friends. iTunes also has a built-in media player. There are other file managers (for example, iFunBox or iTools). But they are unofficial.

USB connection

To pair with a PC you need a USB cable. It should be included with the iPhone - in the box. It is better not to use other wires. If the original cable is lost or damaged, you can purchase the same one. The main thing is to choose components that are suitable for your gadget. A cable with a 30-pin connector (“thick charging”) is intended for devices of older models. Lightning connectors (“thin”) - for new generation devices.

For such a connection, you can only use USB 2.0 ports and higher. With slot version 1.0, the system will issue an alert that everything can work faster. And she won’t “see” the gadget.

Here's how to connect your iPhone to your computer via USB:

Install the latest version of iTunes on your PC.
It is also advisable to download iCloud.
Turn on your iPhone.
Connect one end of the cable to it.
Insert the other one into the PC's USB port.
It should detect the presence of a new device. If you sync your iPhone for the first time, the Apple Mobile Device drivers will be automatically installed. They can also be downloaded from the manufacturer's official website.
Unlock your phone. It will display a notification “Should I trust this computer?” Click "Trust". You may see the message “Do you want to allow this device to access photos and videos?” Tap "Allow".
iTunes should start. If this does not happen, open it manually. Through this program you can interact with the gadget.
Wait until synchronization finishes.
Also, the iPhone icon will appear in the “My Computer” menu as a portable device or external drive.
To go to the device review in iTunes, click on the button with the phone icon. She's on the top left.

WiFi

In addition to connecting to USB, you can create a connection via Wi-Fi. To do this, all synchronized devices must be on the same network. That is, access the Internet through the same router.

You will not be “tied” to the PC by wire. But not all functions are available in this mode. For example, you won’t be able to restore the gadget from a backup or update the software. And such pairing quickly drains the battery.

Here's how to connect your iPhone to your computer wirelessly:

Go to iPhone settings.
Open the "Wi-Fi" section.
Slide the switch to ON mode. It should turn green.
Select your network and enter a password if it is secure.

Now set the synchronization parameters. To do this, you need to connect your iPhone to the USB connector. After one-time setup, you will be able to use wireless communication. And work with iTunes through it.

Connect your iPhone to your PC with a cable.
Open iTunes.
Click on the phone icon. She's on the top left.
In the Review section, scroll down the page.
Check the “Sync over Wi-Fi” checkbox.
Click "Apply".

Now you can try to connect over the air via wireless networks. First, disconnect the USB cable. After:

Open iPhone settings.
Go to the "Basic" section.
Scroll down the page.
"Sync with iTunes" menu.
Tap on “Synchronize”.

Now settings and device files will be available in iTunes.

Bluetooth

Pairing is also possible via Bluetooth. If it is on the devices you want to connect.

First enable it on your computer or laptop. Activate the visibility of your PC so that it can be found by other gadgets with Bluetooth enabled.
Go to iPhone settings.
Move the slider to ON mode.
Find your PC in the list of devices and tap on it.
A message with a code will appear. The same numbers should appear on the computer. This is necessary so as not to accidentally synchronize with an unfamiliar gadget. In some cases, numbers must be entered manually.

iPhone as a modem

Through your iPhone you can distribute the Internet to other devices and use it as a modem. To do this, you need to create an access point. The PC connected to it will use the mobile operator’s network.

Go to the gadget settings.
Section “Modem Mode” (“Personal Hotspot”).
Move the checkbox to ON mode.
If you are using USB synchronization, the PC will additionally install an additional driver. And the iPhone will appear in the list of network connections.
Or activate Bluetooth pairing.
There is also a Wi-Fi password in the settings of your Apple device. With it you can add many devices to one network. Just enter it on each PC.

Since connecting an iPhone to a computer via USB is much easier, this connection is usually preferred. You can use it at the same time to work in iTunes and charge the battery. Yes, and it has more functionality. But a wireless network is more convenient and practical. With it you are not limited by cable length. And with Wi-Fi, the iPhone can be used as a router to access the Internet from multiple devices.

iPhone 4 is a touchscreen smartphone developed by the American corporation Apple. It belongs to the fourth generation of iPhone and is considered the successor to the iPhone 3GS. Let's look at how to connect iPhone 4 to a computer. This may be needed in cases where it is necessary:

upload photos, music, books or videos to iPhone memory;
transfer contacts, notes;
restore or update iOS;
create backup copies of data in iTunes and iCloud.

How to connect iPhone 4: instructions

USB connection

You can connect your iPhone 4 to your computer using the USB cable that comes with your mobile device. To connect your iPhone 4 to your PC, connect one end of the USB cable to your iPhone and plug the other end into your computer's USB port.
Remember, in order to transfer data to your computer as quickly and correctly as possible, the USB port must be of standard 2.0. But in any case, you will not make a mistake, since the USB connector will not fit into any other port except the USB port.
It is also necessary to take into account that not every connector can support this connection. For example, when using USB 1.0 on a computer, the following message often appears: “This device can run faster.” And problems may arise when establishing a connection between your computer and iPhone. First of all, check if the cable is damaged. Try using a different connector or change the USB cable.
Once you have connected your iPhone 4 to your PC, go to Start -> My Computer. You will see an iPhone icon. If no additional software is installed, iPhone will appear as a digital camera in the hard drive menu.
To enter the device memory, right-click on the iPhone icon and select the “Open” command.
To sync your iPhone with your computer, you need to install iTunes. You can download it from apple.com.

Thus, connecting iPhone 4 to a computer using a USB cable allows you to synchronize data from your PC, download music files, photos, videos, and delete or install applications.

You can read more about connecting an iPhone to a computer in our article.

Wi-Fi connection

The new version of iTunes 10.5 allows you to connect your iPhone 4 to your computer wirelessly. In this case, the iPhone and computer must be connected to the same network. There are two ways to create a Wi-Fi network:

using the Wi-Fi module of the computer.
using a Wi-Fi router (wireless router).

To connect iPhone 4 to PC via Wi-Fi, follow these steps:

Connect iPhone 4 to a power source.
We connect the PC and iPhone 4 to the same Wi-Fi network.
Launch the iTunes program.
In iTunes, in the “Devices” menu, select your iPhone model.
In the iPhone 4 menu, select “Settings” -> “General” -> “Sync with iTunes over Wi-Fi” -> “Sync”.
Wait for the synchronization process to complete.

Now you know how to connect iPhone 4 to a computer. Other articles from our site can also help you.

Although modern iOS devices can be used independently of a PC, there are situations when you need to use this option. When the computer does not see the iPhone connected via a cable to the USB port, the problem may be in the drivers for iTunes or other services. Sometimes things are simpler because the cable may have broken or the iPhone was simply connected incorrectly. First you need to find out the cause of the problem in order to correct the situation.

Why doesn't the computer see the iPhone?

The most common answer to the question of why the computer does not see the iPhone is a problem connecting to the iTunes service. Sometimes, to solve this problem, you need to click on the PC connection confirmation on your mobile device. If after this action the PC does not see the iPhone, it is worth checking the functionality of the USB port. Problems may arise due to old versions of programs, applications and drivers for motherboard chipsets. In other cases, consulting a specialist will help to find out the cause of the situation.

Cable breakage

The main reason for the device not connecting to the PC is a faulty or damaged connection cable. Inspect the existing USB cable for damage. There are cases when the contacts inside the wire are damaged (this is difficult to identify visually) and the computer does not see the iPhone. To check, compare the operation of the device with another cable: if the problem is in the accessory, then everything will work out. Have you verified that the cord is damaged? You can solve the problem as follows:

purchase a new cable;
try to fix it yourself;
contact a specialized service center.

iPhone won't connect to computer via USB

The second most common are problems with USB ports: the connection is unstable or the device cannot be detected at all. There may be mechanical damage to the connectors of both the PC and the mobile device itself or their clogging. Perhaps, if there is no synchronization, the computer does not see the iPhone: its operating system is outdated. Often there may be a solvable problem with the USB driver. The interaction between the PC and the phone is affected by security programs, which can also prevent the connection.

Error starting Apple Mobile Device service

Restarting the mobile device or laptop helps resolve the desynchronization issue. It happens that the PC is unable to start the Apple Mobile Device service. The obstacle may be third-party software or a regular “glitch” that can be corrected by restarting this service. The way to correct incorrect operation is to reinstall, which is done simultaneously with the reinstallation of all iTunes software components.

Why doesn't iTunes see iPhone?

Users of Apple devices constantly encounter problems interacting with their PC. In some cases, iTunes does not work on the computer, in others errors are displayed. Reasons for lack of response may be a faulty cable, USB port, or charger slot. An Apple service status error, old drivers, antivirus blocking, or malware influence occurs. An outdated version of iTunes or the device’s operating system interferes with normal synchronization and, as a result, the computer will not be able to see the iPhone.

Problems with iPhone

A laptop or PC will not be able to recognize the connected device when the iPhone is not working. It may not respond to clicks or touches on the screen, or it may simply turn off. Try to force restart your iPhone. Hold the bottom Volume button (for newer models) or the Home button (for iPhone 6 and below) and the Power button until the “Apple” appears on the display.

On average, this takes about 10 seconds. Otherwise, connect your phone to charge for at least an hour. Typically, the device starts charging within a few minutes. In case of failure, it is worth checking the integrity of the connector, cord and adapter. Parts must be undamaged and clean. After making sure that the charging system is visually in order, but the computer does not see the iPhone, you will have to use the help of a service center.

What to do if the computer does not see the iPhone

Users may encounter an issue where they receive an invalid iPhone response when trying to connect. This often happens due to the Lockdown folder in Apple software files. The fix for this problem is simple. Windows users need to go to the Apple folder in Explorer under Application Data or ProgramData and delete the folder called Lockdown to the trash. After the reboot, iTunes should resume, and the PC will begin to recognize the Apple communicator.

How to connect an iPhone to a computer via USB

Each Apple mobile gadget comes with a connecting cable. It connects an iPhone to a computer via USB using the principle of a flash drive for the purpose of exchanging videos, files, photos and others. In addition, you will need a PC with the latest version of iTunes installed. The disadvantage of this method is the physical attachment to a stationary PC or laptop. The process goes through stages that are important for you to complete:

connect the USB cable to the device;
connect to PC;
Next comes the installation of iTunes (if this program has not been installed previously);
launching and setting up synchronization.

What to do if iTunes doesn't see iPhone

In cases where the iPhone does not connect to iTunes, you can use the standard set of tips:

check the integrity of the cable, phone connector, USB;
allow the connection by clicking OK in the pop-up window on the device screen;
update drivers, phone or PC OS;
install the iTunes update or simply restart the program;
restart Apple Mobile Device;
Restart your iPhone or PC.

How to reinstall Apple Mobile Device

When Apple Mobile Device Service does not start, it is worth making several attempts to download it again. To do this you need:

turn off the phone, turn off the iTunes application;
for Windows OS, write services.msc in the command line;
in the window that appears, find the service we need and open its properties;
change the startup type to “Automatic” and stop the service;
After waiting a little, click the “Run” button;
Restart your computer and reconnect your iPhone via USB by opening iTunes.

If there is no solution to the problem, you will have to install this software component again. Removing and reinstalling Apple Mobile Device Service involves simultaneously removing and reinstalling all iTunes items. In the Program Files section, search for and delete the iTunes, iPod, Bonjour folders. In the Apple folder, Common Files section, delete Apple Application Support, Mobile Device Support, CoreFP. Then download the new installation file from the Internet and follow the simple instructions on how to connect your iPhone to your computer to restore operation.

What to do if the computer does not see the iPhone as a removable drive

The main reasons why an iPhone is not detected as a flash drive (removable disk) are the following problems:

USB connection failure;
problems with iTunes components;
problems with the device.

To correct the situation is real, it is important to find out what was the result of the error. A damaged cable will require replacement. If the USB port is broken, you can use another available one. In case of software problems, restart your device, PC, or reinstall Apple software components through Control Panel. If the tips described above did not help and the laptop does not see the iPhone via USB, it is worth diagnosing the phone at an Apple service center.

Video

Owners of an iPhone, especially gadgets of the last two generations, are often faced with the problem of how to connect the iPhone to a computer in order to make the most of the capabilities of the smartphone itself and the operating system for managing the mobile device. In general, there is nothing complicated about this, especially if you know the basic principles used to synchronize with different operating systems.

Apple mobile gadgets

iPhone and iPad are the type of products that were originally created to work exclusively with the support of computer systems from Apple Corporation. It is not surprising that the problems of synchronizing and connecting such mobile gadgets to computers using operating systems other than Mac OS X remained relevant for a very long time in terms of the fact that the OS simply did not recognize the devices.

What can I say, even installing a standard driver for plug-in flash memory in the form of an iPhone’s internal storage was a huge problem. True, over time, the question of how to connect an iPhone to a computer received a universal solution.

The simplest way to synchronize with Macs

As for connecting “related” devices to each other, everything is quite simple. Typically, the connection is made through universal ports with USB interfaces (2.0/3.0). The iPhone comes with a special cable that is used for charging and connecting the gadget to computer terminals.

Operating systems like Mac OS X immediately detect “native” products, install the appropriate drivers and allow you to quickly synchronize your iPhone with your computer.

Windows and iPhone connection problems

As for operating systems like Windows, initially everything was not as simple as we would like. Due to constant competition in the software market, corporations released operating systems, software products, computers and mobile devices that lacked cross-support.

To put it simply, a Windows-based computer simply does not recognize an iPhone even as a removable flash memory device. We are no longer talking about installing drivers or some software so that all functionality can be used to the maximum.

However, the times of strife are over, and now there is a universal solution to the problem of how to connect an iPhone to a computer.

Using iTunes

The synchronization process is very simple. As is already clear, at first the computer does not see the iPhone. The initial condition is to install iTunes software, with version no lower than 9 for Windows OS. If you use modifications of iPhone 5s and higher, a program update may be required.

After installing the application, all that remains is to log in to it using your account, and you can enjoy all the delights that are available when synchronizing your smartphone and computer. It is clear that you can add not only music or video here. Managing, say, contacts, calls, messages, installing or uninstalling applications, etc. is completely simple.

Other means

However, as practice shows, software connection methods are not all that can be “squeezed out” of such a situation. Naturally, in addition to iTunes, you can also use third-party applications such as iFunBox or specialized file managers to see the contents of the internal drive. But they do not always allow full synchronization.

In the case of software, you should also pay attention to the fact that the bitness of the operating system must match the bitness of the application being installed. Otherwise, nothing will simply work.

Sometimes it is better to use a special adapter that can act as a bridge between a mobile device and a computer terminal. It is recommended to use it only as a last resort, for example, when connecting to automotive systems.

As practice shows, installing the iTunes software product is quite enough to achieve the most effective use of a smartphone in combination with any type of operating system, especially since the iTunes application itself is available in several standard versions and is cross-platform, which allows it to be used on completely different computer systems.

Conclusion

After installing this applet, the connection is made almost automatically. You just need to follow the instructions of the “Connection Wizard”, nothing more. Actually, this process should not cause any problems even for an untrained user, despite the apparent difficulty.

Apparently, using a software product is the simplest answer to the question of how to connect an iPhone to a computer with any type of operating system.

Hi all!

After I wrote several lessons about the iPhone, I began to get asked the following question more and more often: Sergey, why doesn’t the computer see the iPhone?. It’s one thing when you were asked about it once, but another thing when this question comes up regularly! I decided to look into this issue, and as it turned out, the reasons for this may be very different and, naturally, the approach to solving this problem may also be different.

I have collected 10 tips that I want to tell you about here. Let's get down to business right away!

Reinstall drivers on USB

One proven way to solve this problem is to reinstall USB drivers for iPhone. We need through device Manager remove them and then reinstall them.

First of all, use a USB cable to connect your iPhone to your computer. Next, go to Properties of the Computer section and open device Manager.

In the window that opens, find the USB Controllers section or it may also be a section Portable devices. Open it and look for Apple Mobile Device USB. You need to right-click on it and select Delete.

In the confirmation window, check the box " Remove driver programs for this device" and click OK.

The old, bad, unnecessary driver will be removed!

Now unplug the iPhone's USB cable from the computer and plug it in again. The driver will be installed again, as indicated by the following window:

Also on the iPhone we should be asked for permission to give the computer access to photos and videos. Naturally, click Allow.

In most cases, when the computer does not see the iPhone, this method will solve the problem. But if this doesn't help you, then let's try other tips!

Update chipset drivers (USB)

Every computer has a motherboard and chipsets installed on it. So, these chipsets are responsible for connecting various devices to the computer. For normal operation of chipsets, drivers are also needed. In some cases, drivers begin to work unstably. Most often this can happen if from some.

It happens that the computer not only does not see the iPhone, it cannot detect any other phones or flash drives at all. This is exactly what happened to me on my old Windows. Updating the drivers for the chipset helped.

What to do in this situation?

First option. First, open the website http://devid.info/ru and click on the green Download button to download the DevID agend program for quick installation and update of drivers.

When installing, uncheck the boxes to avoid installing unnecessary ones.

After starting the program, you can click Start Search and the program will scan the equipment and offer to update old drivers.

It would be good if there is a fresh version of the driver for the chipset. In this case, it will be updated. But if not, then try the following steps.

1.2 Download and install the chipset

The second option is to download the drivers yourself and install them. Depending on your motherboard, it could be an Intel chipset or an AMD chipset. Let's look at the installation using chipsets from Intel as an example.

On the official Intel website, at this link: https://downloadcenter.intel.com you can download the program for chipsets. Press the blue Chipset button.

1.3 Auto-selection of Intel drivers

Third option. You can also have Intel select the drivers needed for our system. To do this, they have a special utility on their website that will scan our equipment and install the necessary programs.

Click "Trust this computer"

Please note that when we connect our phone to the computer, a request appears on the screen where we must allow access to settings and data. Just click Trust.

Connect to another USB connector

Try changing the USB connector. Especially if you insert the cable from the iPhone to the connectors on the front panel of the system unit. Try connecting the cable to one of those connectors on the back of the system unit. These connectors are directly soldered into the motherboard, and they work as cool as possible!

Reinstall iTunes

I hope you know that in order to fully manage your iPhone on a computer, we need iTunes programs for Windows. If it doesn't work well for you, you need to reinstall it. Or you can just update.

Download the latest version and install over the old one. The program will be updated.

Restart Apple Mobile Device Service

Before performing this step, be sure to disconnect your iPhone from your computer and close iTunes. Now we need to restart Apple services. Because you never know, they suddenly become stupid.

Open the search bar by pressing the hot keys WIN+Q and enter Services in the search bar.

We launch the found program and find the Apple Mobile Device Service. Open it by double clicking the mouse.

We stop the service.

Now you need to make sure that the startup type is Automatic and then restart this service.

Open the computer section and find the iPhone

After updating iTunes and restarting the Apple service, the computer should definitely now see the iPhone. Open the Computer section and find your phone here.

In my case it is at the very top, but yours may be at the bottom. Be careful, what if the computer sees the iPhone, but you’re just not paying attention to it here!

Connect iPhone to another computer

If you connect your iPhone to another computer, you will immediately be able to understand where to dig next. If another computer sees the iPhone, then the problem is most likely on the side of your computer, which does not see the phone. If other computers or laptops don’t see the iPhone, then there’s definitely something wrong with the USB cable or with the phone itself! To be on the safe side, I would connect the phone to two different computers with different systems.

Breaking

If none of the above methods solved the problem and the laptop or computer still does not see the iPhone, then something has broken in the device itself. I think that the power connector into which the cable is inserted has simply failed.

Try, test and I hope everything works out for you.