Samsung tablets how to connect to the Internet. The Internet does not work on the tablet. Tablet internet connection. What to do if the Internet on your tablet is lost

How to set up Internet on Lenovo devices.

Smartphones and tablets from the manufacturer Lenovo, although they are not the most powerful and multifunctional devices, are very well suited for those who actively use the Internet, work with email, and use social networks. All these functions require Internet access. You can connect to the network using either wi-fi or a 3G connection. This material will tell you how to correctly set Internet connection settings on Lenovo devices.

Lenovo smartphones and tablets run on the Android operating system. Therefore, the settings algorithm will not differ radically from the standard one.

How to connect to the Internet via wi-fi?

1) In the settings menu, open Wi-Fi.

2) Set the Wi-Fi connection setting to "on".

3) Now find in the list of access points that you have access to.

4) Click on the desired column and enter it in the “password” field.

5) You can also activate an access point that is not password protected, that is, it is free.

6) To determine whether the connection is connected, pay attention to the special icon on the taskbar. It should glow blue.

Now you can access the Internet through your browser or using the application.

How to connect 3G Internet?

In order to gain access to the Internet via a 3G network, you first need to get a SIM card with a tariff that includes Internet service. Usually, when you insert a SIM card, the settings are set automatically. If this does not happen, then first check whether you have funds in your account and whether the “data transfer” option is turned on (it can be found in the “mobile network settings” tab). Only then can you proceed to manual settings.

1) Go to the “data transfer” item in the settings, then to “mobile network settings” and finally “access points”.

2) If the list contains the access point we need, then we simply activate it

3) If there is nothing in the list, then we will create it again. Using the “parameters” button, select the “new access point” item.

4) Then you need to fill in the fields “Name”, “APN”, “Username” and “Password”. The data that needs to be entered can be viewed on your operator’s website. Some fields may not need to be filled out. .

5) Close the menu and check whether access to the network is obtained. This can be understood by the icon on the taskbar (the antenna should light up and any of the symbols H, E, 3G should be next to it).

6) If the connection does not work, you need to reboot the device.

If you were unable to connect to the Internet, then you may have entered the data incorrectly, or you are out of network access, or your device is faulty.

If you have a tablet, it must be connected to the Internet. Otherwise, the meaning of using such a device is lost. Light weight and small dimensions make the tablet portable over any distance; its use is limited only by battery charge. When you can’t comfortably watch movies or play games while traveling, the Internet will come to the rescue. In addition, simply moving around the city opens up great opportunities - viewing current events, making appointments and communicating on social networks.

Connection methods

The tablet can be connected to the Internet in at least four ways without using additional devices. And with the purchase of the necessary adapters and installation of third-party software, you can even log into the network via an Internet cable.

You can access the Internet via your tablet in the following ways:

• via Wi-Fi;
• via access points;
• via Bluetooth;
• using a 3G/4G modem;
• via USB;
• Ethernet connection via cable.

Via Wi-Fi router

One of the most common ways to connect to the network is through Wi-Fi.

This can be a private or public access point. The advantage of connecting various establishments to Wi-Fi is that it is free. However, mobility is excluded - outside the permissible distribution radius, the Internet is disconnected.

How to connect your tablet to the Internet via wifi and ensure constant access? The solution may be to use mobile Internet on a smartphone. By activating the hotspot on your phone and if both devices are nearby, the signal will not be interrupted.

The user finds the connection name, enters the appropriate key, if the data matches, he can use the Internet. Before connecting your tablet to the Internet, you need to clarify this possibility. Wi-Fi distribution is often limited to third parties. There are many ways to do this:

• sorting by IP and MAC address;
• setting a connection session limit - the Internet is not connected when the number of connections exceeds the specified value;
• connection exclusively via the WPS button - simplified user identification without a password.

Via laptop

Often a tablet is used as an additional device for work. This helps to divide tasks and thus increase productivity. In addition, the number of running processes is reduced, and accordingly, the workload of the working computer is reduced. To work on a tablet via the Internet from a laptop, you need to create an access point on the device.

Instructions on how to connect your tablet to the Internet on a computer with the Windows operating system:

1. Click on the "Network and Sharing Center" icon in the lower right corner.
2. In the window that appears, select “Set up a new connection.”
3. By clicking on it, a new window appears where you need to select “Configure a computer-to-computer wireless network.” It is important here not to confuse it with a regular one, because in this case the user will create a new connection, but not a distribution point.
4. When the new screen appears, you need to click the "Next" button.
5. Now the wireless network is created directly. There are three fields here: name, security type, key.
6. In the "Network name" field, enter the desired name.
7. The default security type is set to WPA2. It provides connection via a password. You can also select the WPS encryption type, and thus remove the password connection, and use only the button on the router for authentication. Some router models offer a combination of these methods.
8. Now you need to check the “Save settings” checkbox and click the “Next” button.

Via another tablet

The connection can be made through another tablet or mobile device. The advantage of this method is that it increases mobility. The instructions will come in handy when the user wants to use the tablet on the road and access the Internet from their mobile phone.

Creating an access point on a mobile phone is practically no different from how it is done on a laptop. Instructions on how to connect your tablet to the Internet on Android:

1. In the network settings, select “Create an access point”.
2. Enter the network name and connection key.
3. The encryption method is set.

How to connect the Internet from a tablet to a computer? The instructions are similar, only now an access point is configured on the tablet, and the computer receives the signal.

3G modem

Connecting to a modem is one of the most common methods of accessing the network. It does not require costs in the form of installing third-party applications or additional settings.

Everything you need is included immediately after purchase. The steps are described in the instructions on how to connect your tablet to the Internet:

1. First you need to make sure you have the appropriate USB port. In rare cases, the tablet has an inappropriate connector, and you have to use a special adapter.
2. If after connecting the modem the tablet does not react at all, you need to try installing the drivers. You will also need to install a program to control the modem.
3. The user must configure the modem as described in the instructions. This is done through the corresponding application.

But what to do if the device is still without Internet? The tablet is connected, but there is no Internet? Then you should try rebooting the device.

Via USB

This method of connecting the Internet via a tablet involves the use of additional applications, as well as a USB cable.

The method is useful in cases where you need to connect to the Internet from a computer, but there is no possibility of distributing Wi-Fi.

1. First you need to install programs such as ADB, USB Tunnel and AndroidTool.
2. Enable USB debugging on the tablet.
3. On your computer, in Services and Exercises, check the status of Routing and Remote Access.
4. After connecting the tablet to the computer, run Android as administrator and update the list of available devices.
5. Click the connect button after selecting the device.

After the process is completed, you can connect.

Via Ethernet

When you need the fastest possible Internet, you need to connect directly.

By cable? To do this you will need an adapter and the necessary drivers. One of the recommended USB adapters is RJ45. This is what drivers are needed for. Along with the installation package you can find instructions for use. After completing the steps described in the instructions, the adapter will work and you will be able to connect to the network directly.

Conclusion

The simplest methods of connecting to the Internet are via Wi-Fi or a 3G modem.

The 3G connection is already losing its relevance, since there is 4G, which is much faster than the previous version. 3G networks provide a maximum speed of 3.6 Mbps, and while moving the speed drops significantly. It was found that subscribers who moved no faster than 3 km/h had a connection speed of 384 kbit/s. Fixed objects were able to transmit traffic at a speed of 2048 kbit/s.

The 4G network provides traffic speeds of up to 1 Gigabit/s for stationary objects, and up to 100 Mbit/s for users on the move.

The fifth generation of 5G should provide high throughput compared to 4G technologies. They promise that in a megacity (10 thousand people or more) the transmission speed will be 100 Mbit/s, and in a group of up to 50 people - 1 Gbit/s at the same time.

Speed ​​over Wi-Fi varies depending on the provider package used. If the router supports the IEEE 802.11ac standard, the transfer speed can reach several Gbps. The 802.11n standard provides speeds of up to 600 Mbps, and 802.11g - up to 54 Mbps.

The solution to the question “how to connect a tablet to the wired Internet” depends on the network equipment, the type of Internet connection and the operating system of the tablet.

Unfortunately, in some cases, a cable Internet connection is technically impossible to implement.

Wired Internet is called an Ethernet connection (pronounced “ethernet”), and the connector for connecting it is RJ-45.

Can I connect my tablet to wired internet?

To connect your tablet to the wired Internet, first of all you need to find out the type of your Internet connection: it can be a DHCP or PPPOE connection.

You can find out the type of connection from your contract with your provider or from your Internet service provider's 24-hour support service.

Also, the sequence of setting up an Internet connection depends on the operating system installed on the tablet: all desktop PCs are suitable for Windows devices.

It is much more difficult to set up a tablet connection to the Internet via USB for Android devices, so here we will look at how to connect the tablet to the wired Internet on this OS.

How to connect a tablet to the Internet via cable?

Connecting Android devices to a simple cable Internet primarily depends on the hardware capabilities of the device. Let's look at the main options available to users:

• Method No. 1: connecting a tablet with an RJ-45 connector to a wired Internet.

As a rule, the RJ-45 connector has so-called “hybrid” devices that combine a tablet and a netbook.

Setting up an Internet connection depends on the type of connection:

Connect the cable to the tablet, then find and activate the Ethernet connection in the device settings.

-PPPOE

This type will require separate software - pppoew.

In the program, enter the username and password provided to you by your provider to connect to the Internet. Please note: to use the program you must have the highest rights in the system.

• Method No. 2: connecting a tablet with a USB connector to the wired Internet

If the tablet has a standard USB 2.0 or 3.0 input for connecting devices (for example, flash drives), then connection is possible through a special adapter (also called a USB network card).

This device looks like an adapter with an RJ-45 socket on one end and an RJ-45 socket on the other.

Connecting the Internet to the tablet via USB:

1. 1. Switch the device to USB host mode;

The DHCP connection will work when Wi-Fi is activated, and PPPOE will also require pppoew.

• Method No. 3: connecting a tablet without RJ-45 and USB to wired Internet

A “classic” example of a tablet without USB ports and RJ-45 is the iPad. On such devices, connecting to a wired Internet is not possible.

However, any compact router, for example, Tp-Link TL-WR702N, can provide Internet connection to any WiFi device.

Such routers are small in size and have a low market value, while the routers are much more functional than simple USB-RJ-45 adapters, which makes them an excellent alternative for connecting a tablet to a wired Internet.

Despite the fact that most modern gadgets run on the Android operating system, many owners do not know the basic principles of interacting with it. In particular, this problem includes Internet connections, the methods and methods of which are now abundant, they have been studied far and wide, but for some reason they do not reach ordinary users. Let's close this knowledge gap on how to set up the Internet on an Android tablet in all available ways.

Wireless Wi-Fi connections

One of the easiest and most accessible methods is a wireless Wi-Fi network, since absolutely all modern tablets are equipped with a Wi-Fi receiving module. The process is quite simple, the main thing is to be in the coverage area of ​​one or another distribution. Let's set up the connection.

Connection selection

We call the settings menu on the tablet, either through a shortcut or through the notification panel. We will need the very first point where we need to set the operation indicator to the “ON” position, as shown above. Next, in the right field, click on the dot to select it, then a window will appear where you need to enter a password for access.

Access point password

The operating system will automatically check compliance and go through the authentication stage, after which the gadget will be assigned a network address to access the Internet.

Mobile 3G connection

If all devices are equipped with Wi-Fi, then not all devices have support for working on the 3G web, and this is due to some individual preferences of manufacturing companies.

Mobile Internet

To start creating, you need to:

• Place the SIM card in the slot
• Reboot the operating system.

Call the settings menu and repeat the steps:

• Click on “More” (1)
• Select “Mobile networks” (2)
• Allow mobile traffic (3)
• Go to the points menu (4)
• "New access" (5)
• Enter the data (6).

Cellular operators

Depending on the operator you choose, we mark the data from the table and carefully transfer it to the fields of the same name, while checking each entered character. After entering, save the entered parameters and reboot the tablet for the new parameters to take effect. After downloading, we allow data transfer on the World Wide Web (mobile data) through the notification panel.

Notification panel

In different versions of the operating system, this item may have different names, but the essence does not change in principle.

In addition, if your device supports phone calls and SMS sending, then you can receive automatic settings by sending a message to the corresponding operator number, or wait until they come by themselves after installing the SIM card in the slot.

External USB modem

For those owners whose device is not equipped with a mobile interface, but has the ability to work with external devices, for example, a modem, via an OTG cable, it will be very interesting to read about its correct connection.

Modem program

To do this, you need to choose a modem that is compatible with your tablet, since not all modems are suitable for all tablets. Download the 3G Switcher program from the Internet and install it on your computer. Now take the modem and remove the SIM card from it, then connect it via USB to the computer and run the program. In the program, press the first button - “modem only”, wait until the procedure is completed, then turn it off, return the SIM card and connect it to the touch tablet.

• Huawei
• Some MTS.

Connection via workstation

This option is used if the gadget does not support external devices and mobile communications, and it is also impossible to create a point for distribution via Wi-Fi. That is, the Internet is directly connected to the computer via twisted pair, and there is no router.

To create a bridge you will need:

• Computer with active Internet
• Drivers for tablet
• Application – AndroidTool
• USB and some time.

Be sure to install drivers - you can download them on the company’s official website or use universal ones for Android devices.

Computer settings

Settings panel

Through Start or Settings, launch the control panel, find the corresponding item “Network and Internet”, see above.

Control Center

We call the active connection control center, where we find our local connection.

LAN Properties

We point the mouse at our connection, right-click to call up its properties, see above.

Data access

Now go to the “Access” tab, check the box, this allows external devices to access the network of this workstation.

Gadget setup

For the developer

Call up the settings, and go down to the “For Developer” item - check the box next to the selected “Debugging” option, return to the desktop. We take the cable and connect the tablet to the computer through it.

Android program

Let's launch the application and start creating the bridge. Immediately after turning on, press the button (1) to search for devices; your gadget will be displayed in the “Connections” menu if everything is done correctly. Press the button (2) and select the address: 192.168.0.1, finally press the button (3) to create a connection. This completes the setup.

In addition, never disconnect the cable from the computer, as the connection will be destroyed.

Internet via laptop

Each laptop is equipped with Wi-Fi, and if you do not have your own router, then through a special program your computer will become a stationary router.

Setting up the application

We download the program Connectify from the Internet to the workstation, look at the image. Install and launch, let's start creating:

1. Enter the name of the point
2. Create and enter a password
3. Selecting a network card that will distribute resources
4. Select the “Wi-Fi” standard
5. Selecting the encryption method and password access
6. Let's create a point.

Now we take the tablet, and through the “Wireless Connections” menu, connect to the distribution.

Bluetooth connection

If your device is equipped with Bluetooth, then you can also access the network through it.

Bluetooth connections

The method is similar to Wi-Fi: we set up Bluetooth distribution on one gadget, and the second device connects to it. It is worth noting that the speed is several times lower and the range of action is shorter, this should be taken into account. This method can also be used on laptops.

Portable point

The new Wi-Fi 3G technology is probably rightfully considered the most universal method of obtaining Internet resources.

Compact point

This compact and fairly lightweight device performs two functions at once:

• Receives signal via mobile networks (using SIM card)
• Redirects it to the Wi-Fi network.

Thus, the owner of such a device has at his disposal a portable access point, which takes up very little space but has great capabilities. The connection is made using Wi-Fi connection technology. Putting it in your jeans pocket or bag, you will always be in touch with your friends.

Video review of methods for accessing Internet resources

Modern tablets are divided into two types: wifi and wifi+3g (LTE). The first type can connect to the Internet only by connecting to a wireless wifi network. You can easily install such a network at home. Many restaurants, cafes, shopping centers and other public places also offer free Wi-Fi connections.

However, if you find yourself on the street or in another place where there is either no wifi at all, or all access points are password protected, you will not be able to access the Internet. In this case, you need one with the ability to access the Internet via a SIM card (wifi+3g). With the help of such devices you can be online anywhere, depending on the signal from your mobile operator.

Connecting the tablet to wifi

The easiest way is to connect to a wifi network. First you need to go to the settings and enable the module of this wireless network there. If you have an iPad tablet, then you should go to “Settings” - “wifi”, after which a list of available networks will appear in front of you. All you have to do is select the one you need, after which the connection will be established.

In Android tablets, the operating principle is similar. The connection module is also in the settings (“Settings” - “Wireless connections”). After this, a list of available networks will open in front of you.

Look carefully at the list of available networks. If there is a padlock next to the wifi icon, then the network is password protected. Without entering it, you will not be able to connect to the Internet. It is also recommended to protect your home access point with a password. If there is no lock icon, then you have an open network that you can connect to freely.

It is worth remembering safety measures. For example, you should not use online banking while accessing the network through an open wifi access point.

To turn wifi on and off, it is not necessary to go into the settings every time. There are methods to quickly access the corresponding option. To do this, on an iPad you should swipe your finger from the bottom of the screen up, and on Android tablets, on the contrary, from the top of the screen down. All that remains is to find the network sign and click on it.

Connecting the tablet to 3g

If your tablet supports 3g connection, you can use it. To do this, first of all you need to purchase a SIM card with an connected unlimited Internet tariff. Pay attention to the SIM card format that your tablet supports. The iPad works with the micro-SIM format, and some Android tablets also support simple ones.

When you have it in your hands, you need to put it into the tablet. You can find out how to do this in the instructions for the device. After successfully installing the SIM card, all you have to do is wait for it to be activated on. When the 3g icon appears on the screen, you can safely go online.

As a rule, the speed of 3G Internet is much lower than wifi. In addition to this, many plans limit the volume (a daily or monthly limit is given). So it will be problematic to download large games or watch videos. But for using mail, websites and social networks, the power of 3G Internet is quite enough.

The latest tablet models support LTE connections, which are much faster than 3g. If you want to take advantage of this, you need to check access to such a network in your region with your mobile operator.