The necessary set of programs for iptv. Setting up an IPTV player to watch IP television on a computer

Using the channel list for the IPTV Player, you can watch television broadcasts on your computer.

Let's take a closer look at how to set up the player for the first time, where to get IPTV playlists from, and what else you can do in this player.

Contents:

What's happenedIPTVand what can it do?

IPTV is an Internet television protocol that broadcasts TV channels directly to your computer.

To play content you need a protocol that supports it.

IPTV provides users with sources for online playback of streaming video, so the speed, quality and accuracy of program display primarily depend on.

The operating principle of IP television is to send one TV program to the client computer.

The playback stream only changes if you change the channel.

Then the system executes a new request.

Thus, IP broadcasting is faster and higher quality than using a regular TV, which transmits a full list of channels simultaneously, significantly worsening the final picture quality.

Internet television cannot be viewed in a browser, since the global network is it's just a medium for passing playback links.

Today IPTV– this is the best option for watching channels in terms of speed/quality ratio.

In addition, using Internet TV is absolutely free, does not require connecting to a provider and purchasing expensive TV channel packages.

• Interactivity . The user can pause the channel playback and not lose a piece of the air when turning it on again. Playback will continue from the point where it stopped. This way you won’t miss your favorite movie, show or news broadcast;
• Minimum number of devices for playback . You don't need a TV or a special transmitter. Only a computer with Internet access and a multimedia player, which can be installed for free;
• Minimal loss in quality. Thanks to the digital signal, you see a clearer picture. Gradually they began to use digital signal transmission technology, but even today you can still find a lot of devices that support analog technology;
• Unlimited number of TV channels and programs . Choose a channel from any country and its region. Playlists with hundreds of channels in different languages ​​and any subject are available on the network. You don’t have to pay money for them, as is the case when using TV channel packages from a provider.

• Limited number of programs, which work with such data transmission technology;
• Playlists may become inactive over time, because channel representatives have the right to demand that the source be closed. Because of this, you have to constantly search for the latest IPTV playlists;
• There are frequent delays in playback. For example, a program on a specific channel of your IPTV player may lag behind the real broadcast by several seconds or minutes.

SettingsIPTV Player

To work with IPTV lists, you will need a special player that supports the data transfer protocol.

The most popular and stable application is This is IPTV Player.

You can download the program from the official website of the developer using the link http://borpas.info/iptvplayer

To get started with the program, download and install it on your computer.

Then open the player shortcut on your desktop or through the Start menu.

Before you start playing streaming video, you should change a few settings in the program.

To go to the configuration window, press the key combination CTRL and P.

Then open the general settings tab.

In the column "Network Interface" enter your IP address.

You can find it out by calling your provider or using the command line (ipconfig command).

If you want to connect to the Internet, in the program settings next to the field "Network Interface" select Auto.

Now the program is ready to work.

You can download and open IPTV channel lists.

Application features:

1 Playing playlists in M3U, HLS, RTMP, UDP, HTTP format;

2 Applying settings for a channel or the entire playlist;

3 Convenient mode for viewing the list of available channels;

4 Automatic unpacking of playlist contents;

5 You can use any smartphone or tablet as a program control panel.

BesidesIPTV Player, you can play TV channels usingVLC Media PlayerorAll Player.

Downloading channel lists

Downloading and installing a player to watch channels is not enough.

You will also need to download a special playlist with a list of channels. The most common format for such a playlist is M3U.

In a search engine you can find a huge number of sites that offer download lists of channels.

During the search process, the main thing to pay attention to is the date the entry was added to the site - the newer it is, the greater the likelihood of getting a working playlist.

Over time, access to free stream of channels from the source may be disabled at the request of the copyright holder, so you need to download new channel lists regularly.

If you've already downloaded a playlist and not all of its channels are working, that's normal.

Usually, Each source has a 10%-20% percentage of broken links.

A few links to the latest playlists from 2017-2018:

Also, there are special web services where You can download current channel lists by country.

On the main page you can select a country, region, or a separate complete list of popular sports channels.

Self-updating playlists of TV channels in Russian:

To open a playlist, just double-click on it with the mouse and in the window "Play using..." select the desired player.

You can also launch the application, click on “Browse” and “Open”, and then select the playlist file in the Explorer window that opens.

A list of available channels with their channels will appear in the main player window.

Double-click on a list item to start playing the content.

To manage your video, use the program's navigation panel.

The Stop, volume, rewind and zoom keys are available.

IP-TV Player is an application for watching IP television. Provides access only to unencrypted channels. The utility can record streaming video to a file, allows you to quickly set up channels and easily control the broadcast using the mouse and keyboard. You can download the player for free using the link below.

What is IP television?

IPTV is also called DVB-IP or TVoIP, and many users believe that it is television that broadcasts over the Internet. However, the letters IP simply indicate that this digital information exchange protocol is used to distribute content. IPTV is similar to regular cable television, with the difference that it reaches the user through the same channel as the Internet. The IP television service is provided by the provider, that is, the company that installed the network cable into the user’s home. IPTV is the broadcast of TV channels through the provider’s transport network, and the player of the same name is a means for viewing it.

Initial player setup

The utility works properly on 64 bit/32 bit operating systems:

• Windows 7;
• Windows 8.1;
• Windows 10

Most antiviruses and firewalls block the IP player because they consider it a malware attack. Therefore, you should add the application to the exclusion list and allow network activity for it.

In order for the player to function normally, you will need to configure it.

1. Launch the program and select “Empty Profile” as the preset.
2. Go to the “Settings”® “General” menu and load the channel list through the appropriate line. Some providers compile a player distribution package, including their settings and logo. In this case, you can download their version of the application for free with channels. If this is not possible, you will have to look for a list of channels on the Internet.

1. Go to the “Channel” tab and select the image settings.
2. Open the “TV program” menu, right-click on it and select “Automatic matching” so that the utility selects the corresponding logos and TV program files.

Ukraine and Russia have different Internet providers, so the list of channels will only include television broadcasts from the country in which the user is located.

Program features

1. Using a laptop keyboard to control video.
2. Possibility to connect a smartphone as a control panel.
3. Record video broadcast to a file in several formats.
4. Availability of viewing/recording scheduler.
5. Auto-download of TV programs in M3U, TXT, XMLTV, JTV formats.

The application can be installed on your computer and configured in minutes.

• DefinitionIPTVplayer
• DownloadIPTVplayer
• InstallationIPTVplayer
• SettingsIPTVplayer for viewingIP– television on a computer
• Conclusions about useIPTVplayer

DefinitionIPTVplayer

IPTV player is a TV broadcast player that was created based on the VLC player. The IPTV player is specially unified for watching IP television.

Key features of the IPTV player:

• Function for recording streaming video and audio to a file
• Program support in JTV
• View unencrypted Http, Librtmp, rtmp, udp-multicast streams.
• LUA script support
• Search for multicast channels
• Background recording of unlimited number of channels

DownloadIPTVplayer

You can download the IPTV player from the official website http://borpas.info/iptvplayer

Installing an IPTV player

So, you have downloaded the installer for the IPTV player “IpTvPlayer-setup”. Launch it. The “IPTV Player Installation Wizard” appears in front of you. Here I advise you to check the box next to the line “Select settings and installation folder”.

This will make it possible to:

• directly select the location where the IPTV player will be installed,
• create a shortcut on the desktop
• allow all users to use the IPTV player

If you are not going to transmit IPTV over a local network, you don’t have to check the box next to “UDP-to-HTTP Proxy”.

Afterwards, click the install button - and in a few seconds the program will be installed. You will see the corresponding “Completing the IP-TV Player Installation Wizard” window. Click Finish to exit the installer. The installation is complete and the following shortcut appears on the desktop:

Setting up an IPTV player to watch IP television on a computer

In order to watch IP television using an IPTV player, you need to do the following:

Launch the program “IP-TV Player”. A window for selecting an Internet provider appears in front of you. I advise you to select an empty profile, since your provider may not be in the drop-down list and the IPTV player will not always find the data it needs on the network using the built-in link.

The following window appears in front of you:

As you can see in the upper right corner, “The channel list is empty.” In order to add channels to the IPTV player, you need to add the “M3U” (.m3u) file with a list of channels to the player or specify the address with the list of channels http://. To do this, go to the IPTV player settings (click on the gear).

A menu appears in front of you, in which we put a tick in the “All settings” line.

After which you see the full menu of the IPTV player. Select the “General” tab and the line “Channel list address (M3U file).

If you click on the arrow in this line, a submenu will appear in which we select “Select a file with a list of channels...”

If you click on the arrow in this line, a submenu will appear in which we select “Specify the address of the channel list...”

We enter the address manually or copy a previously saved link. It looks like this:

After you have done the above, your IP television will start

Conclusions about using an IPTV player

IPTV Player, I would characterize as the best software for watching IP television. With IPTV Player the following is possible:

• For each channel, the aspect ratio of the video image (3×4, 16×10, 16×9, etc.) and the number of output audio channels (left channel, right channel, stereo, 5.1, etc.) are adjusted, as well as If there are several audio tracks, you can select the broadcast language
• It is possible to schedule turning on and off IPTV Player for recording or watching video
• Possibility of simultaneous display of several channels on the screen
• Control the player using keyboard shortcuts, here are some of them:
• F3 – background channel recording
• +/-/* — increase/decrease/original image size
• Enter channel list twice
• Arrows up/down/left/right – move through the player
• On the information window under the video window you can adjust the volume, stop/resume IPTV television playback

And all this is not all the advantages of IPTV Player, a free program that will allow you to comfortably watch TV channels on your computer.

Description: IP-TV Player is a high-quality player for broadcasting over-the-air IP television channels. Individual settings for channels, the ability to record a stream to a file. TV programs in JTV format, recording/viewing scheduler, background recording are supported.

Additional Information:
IPTV (aka DVB-IP or TVoIP) does NOT mean “television broadcast over the Internet”. The beginning of this abbreviation, IP, only means that this data transfer protocol is used (in this particular case, for transmitting video content), but the entire system is not connected with the World Wide Web in absolutely anything. The IPTV service is provided to you by YOUR PROVIDER, i.e. the company that installed a network cable (Ethernet) into your apartment or installed an ADSL modem. IPTV is similar to regular cable television, only it comes into the house not via a coaxial cable, but via the same channel as the Internet (ADSL modem or Ethernet). If your provider does not provide such a service or provides it only through a set-top box and does not publish a list of channels, then you do not need a player.

IPTV is the broadcast of channels (usually received from satellites), mainly in MPEG2/MPEG4 formats over the provider’s transport network, followed by viewing on a computer or a special set-top box (Set-Top Box).

Some providers use stream encryption so that certain channels can only be watched through a set-top box using an identification card or PIN code; the player will not be able to play such a stream. If the provider only sells the service together with a set-top box and encrypts the channels, then the player will also be useless for you.

Program features:
simple and quick deployment in the provider’s network
viewing open (unencrypted) http, udp-multicast, etc. streams. (partial support for TV tuners via WDM driver)
separate settings for channels
ability to record a stream to a file
OSD (information window at the bottom of the video window) - volume and channel name, recording indicator
list of channels in the video window
control video from the keyboard (see the keys in the brief help in the program itself)
support for TV programs in JTV format (automatic downloading, unpacking, comparison, ability to export to HTML)
recording/viewing scheduler
background recording of any number of channels (limited by the capabilities of the subscriber line)
We ourselves do not provide IP television services, but only give you a player to use the service of your provider
The player is not intended for viewing Russian channels from abroad via the Internet
the player cannot show encrypted (DRM, CAS) channels

IPTV and Firewall
Almost all firewalls, such as Agnitum Outpost and Kaspersky Internet Security, block IPTV (multicast) by default, as they consider it an attack. In general, it is necessary to enable the IGMP protocol in the system rules and allow IP-TV Player any TCP activity (for downloading channel lists and TV programs) and UDP activity (directly for IPTV).
Outpost Firewall
Menu Settings -> Applications -> Trusted applications -> Add...
Specify the path to IpTvPlayer.exe
Go to the System tab and in the "Global rules and access to rawsockets" section, click on the Settings button
Uncheck the Block IGMP rule
Create a rule "Where is the IP protocol and the IGMP IP protocol. Allow this data"
Kaspersky Internet Security
Settings -> Firewall -> Filtering system -> Settings -> Rules for applications
Click add and specify the path to IpTvPlayer.exe
Click the Template button and select Allow All
Go to the Package Rules tab
Create a rule "Allow incoming and outgoing IGMP/RGMP packets
ESET Smart Security
Go to the "Advanced Settings" menu by pressing "F5" or "Settings -> Advanced Settings".
On the left in the menu, go to the “Personal Firewall” section, in the “Filtering Mode” section, select “Interactive Mode”.
On the left in the menu, go to the "Rules and zones" section, in the "Rules and zones editor" section, click the "Settings" button.
Create a rule for the "IGMP" protocol: "Name" - any word, "Direction" - any, "Action" - allow, "Protocol" - IGMP.
Click "OK" everywhere and close the program, it remains hanging in the tray.
Launch "IP-TV player" and "NOD32" will ask for action.
Check the box "Remember action (create rule).
Open "Advanced Settings" and click the "Custom Rule" button: "Direction" - any, "Action" - allow.
Click OK.
Comodo Firewall
Protection -> Application Monitor: Specify the path to IpTvPlayer.exe, select "Any parent", check the "Allow any actions by this application" checkbox
Security -> Network Monitor: Select "Protocol: IP", go to the "IP Details" tab and select "IP Protocol: IGMP". Move the new rule one position higher so that it is before the "Block" rule
Windows XP Firewall
Control Panel->Security Center->Windows Firewall
"Exceptions" tab->Add program->IPTV Player, Ok->Ok
Firewall Windows Vista, Windows 7
Control Panel->Security Center->Windows Firewall (left)->Change Settings
"Exceptions" tab->Add program->IPTV Player, Ok->Ok

Changes in version 0.28.1.8847:
support system mouse wheel settings
fixes in HLS stream quality selection

Note:
When installing, don’t forget to uncheck the boxes if you don’t want the “delights” of Yandex

We present to your attention a review of IPTV Player - the best program for playing any television channels on a computer.

IPTV is a technology for playing interactive television via the Internet protocol. With its help, the user gets the opportunity to watch using the Internet.

All this is completely free and without any viewing restrictions.

You can watch channels both on your computer and on TVs that support .

TV channels are downloaded in playlist format and then played using a special player. Also, there are programs with a built-in basic set of TV stations.

The most popular program for working with Internet television is IPTV Player. Next, we will consider its features, installation process, and settings, as well as similar applications for playing TV channels on a computer.

Advantages of IPTV

IPTV will be useful to everyone who wants to watch any channel in the world without using paid packages from the provider.

Also, the technology for working with interactive TV is convenient to connect to the network.

This way, you don’t have to search for the live broadcast of each TV channel on the Internet yourself.

More benefits of IPTV:

• Unlimited number of channels;

In any country, television networks provide only a limited number of channels that can be broadcast on TV.

There are different data packages from the provider, but none of them will give you full access to every channel in the world.

If you have a fast WiFi connection, you can watch any program without any problems, and you can download the channel list to any folder on your memory card.

• Free distribution.

There are many sources on the Internet where you can download lists with thousands of channels completely free of charge.

Also, in IPTV playback applications, you can specify your country and gain access to the most popular stations.

Despite the many advantages, IPTV also has significant disadvantages. Among which is problematic work in conditions. Since broadcasting of channels is possible only through the global network, mobile Internet or poor coverage will not be enough to load the channel normally and the program itself will most likely freeze.

About IPTV Player

The IPTV Player application is a convenient player whose main function is to play live broadcasts of channels using the Internet.

Also, the program can play regular videos that are stored on your PC.

IPTV Player is one of the most powerful players for PC and has a built-in codec package. This allows it to support all kinds of encryption formats and algorithms.

More features:

• Mode for viewing unencrypted protocols. Among them are UDP, HLS HTTP. When receiving video from such servers, the program will continue to work and will not show an error message, as happens with similar players;
• Reading damaged objects. The program easily restores damaged components and allows you to view their contents;
• Listening to lossless audio formats;
• Creation of a server for broadcasting and retransmission of television broadcasts.

Where can I download the player?

Note that user reviews about the player are positive.

Many note the simple interface, the presence of the Russian language and the display of television broadcast plans for each channel.

The application size is minimal - only 5.8 MB . At the same time, you will not have to download any additional elements other than a list of custom channels.

Downloaded playlists of TV channels are stored in one file and take up no more than a few megabytes of disk space.

Latest version and innovations

Version IPTV Player 49.1 is the newest build of the program to date.

Unlike previous versions of the application, it now has even more functions that make it easier for the user to work with TV channels:

• Simple basic setup;
• Possibility of rapid deployment within any type of home network;
• The ability to configure each TV channel or set general playback parameters for all broadcast stations;
• Record a video stream to a file on your computer without stopping playback;
• Scheduler option. You can create your own lists with queues for watching TV channels, record reminders about your favorite shows or series, and customize their display in the program.

One of the most interesting innovations in build 49.5 was the use of a smartphone as a remote control for broadcasting.

If your phone supports the function of working as a television remote control, you can easily apply this option to the IPTV player. This will allow you to turn your computer into a full-fledged TV or switch it if you have created a home network with.

Installation

To begin installation, download the EXE file from the developer’s website, the link to which is provided above. After this, you can begin installation.

Follow the instructions:

• Run the downloaded file as administrator. To do this, right-click on it and select the appropriate menu item;

• Next, the Installation Wizard will open., in the window of which you must specify the root folder for storing application files, the version of the modules (we recommend installing version 1.111). Also, decide whether you need a desktop shortcut, proxy support, and general settings. Click "Install";

Note! If you are not sure about the correct settings, set all parameters as shown in the figure below. This combination is standard and will allow you to install the program without any bugs.

• Next, automatic unpacking and installation of all player components will begin. It will take no more than a minute. Click on "Done" to close the window and start working with IPTV Player.

Playing channels

After installation is complete, a shortcut to the IPTV Player program will appear on your desktop. Click on it to launch the application.

• With the help of your provider.
• From a pre-downloaded list of channels.

First, let's look at the first option for using the program. The process of searching and downloading individual playlists is described in the next section.

IPTV Player works with an already built-in list, which includes most Russian, Ukrainian and Belarusian channels. There are a total of 104 variations of different sheets. The user just needs to click on the list to expand it. Then scroll through the list and choose the most suitable provider.

For easy navigation, first indicate the city or region and only then the name of the provider.

This will help you find local channels faster, no matter where you are.

Since IPTV playlists are dynamic, they need to be updated constantly. Providers may block access to channels or change the addresses of direct playback sources. However, when you select a provider, the application will automatically detect any changes and begin downloading updates for your broadcast stream.

The update process will take a few seconds, and the file itself with the update for a specific region will occupy 1-2 MB. After this, you can start watching TV channels.

On the right side of the window you will see a list of all available stations that the selected provider provides today.

Each TV channel will have its own name and icon.

To start broadcasting, just click on the desired element and the TV show will start showing on the left side of the window.

You can add a channel to your favorites list so you can quickly find and turn it on in the future. To do this, click on the heart icon next to the channel name.

In the player you can view the name of the TV show that is currently being shown. To do this, just click once on the playback area. To switch to full-screen mode, double-click on the channel name or on the built-in player window.