Can a Samsung laptop provide Wi-Fi. We use a laptop as an Internet access point (Wi-Fi router). Setting up a computer-to-computer connection via Wi-Fi

If you need to share the Internet between several gadgets, but don't have a router at hand, you can do without it. These instructions will help you turn your computer into a router for distributing the Internet via an access point (Wi-Fi network) or an Ethernet cable.

1. How to distribute the Internet from a computer using the “Mobile hotspot” function (Windows 10 only)

1. Find the Mobile Hotspot menu: select Start → Settings (gear) → Network and Internet → Mobile Hotspot.

2. In the “Internet connection sharing” field, select the type of connection that connects the current computer to the Internet. This can be a Wi-Fi (or 3G) or Ethernet wireless connection.

3. Click “Change” and in the next window, specify the name and password for the new wireless network through which the computer will distribute.

4. At the top of the page, enable the option “Allow the use of my Internet connection on other devices.”

After this, you will be able to distribute the Internet through the created Wi-Fi network. It is enough to connect the necessary devices to it using the password created in the third step. And you can turn off Internet distribution in the same place where wireless communication is turned off - in the “Network” window on the taskbar.

1. Launch Command Prompt. To do this, enter “Command” in the system search, right-click on the found element and select “Run as administrator.”

2. To create a new network for distribution, enter the command netsh wlan set hostednetwork mode=allow ssid=Stacy key=4419E1z# in the line and press Enter. Instead of Stacy, you can enter any other network name, and instead of 4419E1z# - any other password.

3. To activate the created access point, enter the command netsh wlan start hostednetwork and press Enter again. If the commands worked, you will see the following text.

4. Now allow other users to access the Internet through the created network. First, open the Windows Control Panel and select Network and Sharing Center.

5. Then right-click on the icon for connecting your computer to the Internet, select “Properties” → “Access” and check the boxes next to permission requests. In the “Home network connection” field, select the wireless connection created in the second step of the instructions.

After this, you will be able to connect other devices to the Wi-Fi network configured in this way using the specified password. To disable the access point, enter netsh wlan stop hostednetwork at the command prompt. To re-enable it, use netsh wlan start hostednetwork .

If the Internet does not work on the connected devices, open the “Device Manager” menu through the “Control Panel”, expand the “Network adapters” item and check that all devices from this list are turned on. If you find inactive ones among them, enable them using the context menu.

If other problems occur, try reinstalling the network adapter drivers manually by downloading them from the manufacturer's website, or automatically using the Driver Booster program or service. The latter will do everything for you.

If you don't want to bother with the command line, you can use a special utility to quickly configure a wireless access point. You can use the free Connectify Hotspot program in just a few minutes.

Download and install Connectify Hotspot.
Launch the program and follow the on-screen prompts. The Russian interface language can be selected in the settings. The utility will ask you to set the type of computer connection to the Internet and the parameters of the new wireless network. After this, all you have to do is click on the start button to activate the access point.

When you're done, you can distribute the Internet to other devices via Wi-Fi. You can manage your wireless network directly in the program window.

Connectify Hotspot also has a paid version with additional features. For example, it allows you to distribute not only landline Internet via Wi-Fi, but also 3G and 4G. Hotspot Pro costs $35.

Connect the Ethernet ports of both devices with a cable.
On the computer from which you want to distribute the Internet, open the “Control Panel” and go to the “Network and Sharing Center” → “Change adapter settings” section. The names may differ between versions of Windows.
In the window that opens, select two connections using the Ctrl key. The first should be responsible for connecting your computer to the Internet. The second is for connecting a second computer to this one. Right-click on either of the two connections and select “Bridge Settings.”

After a few seconds, a new connection called “Network Bridge” should appear, and the status “Connected, Linked” should appear next to the used connections. If everything goes well, the Internet will work on the second computer. But this may not happen immediately, but after 10–15 minutes.

In macOS it is quite easy to set up Internet sharing, both via cable and . You don't need any additional programs for this.

Expand the Apple menu and go to System Preferences → Sharing.
Check the “Internet Sharing” checkbox in the left panel and specify the type of connection of the current computer to the Internet in the “Shared Connection” list on the right side of the window. For example, if it is connected to the Network via cable, select Ethernet.
In the “For computers using” field, select a method for sharing Internet access with other devices. For example, if you want to distribute the Internet wirelessly, choose Wi-Fi; if via cable, then choose Ethernet.

If you chose Wi-Fi, uncheck the “Internet Sharing” checkbox, click “Wi-Fi Settings” and set the access point name and password, then check the “Internet Sharing” checkbox again.

After making these settings, you can connect other devices to your computer using the selected method.

How to distribute Wi-Fi from a laptop using only standard functionality; today we will talk about enabling Wi-Fi distribution from a laptop!

Any modern device is equipped with a special device. This allows the computer to work as a router. To do this, you need to create a virtual bridge. It, in turn, consists of network devices (adapter and board).

How to quickly make a laptop distribute Wi-Fi Internet without a router?

This connection can be created using tools that are standard software tools. This:

application for setting up the Internet and protecting content;
text interface cmd;
bat file.

In any case, to make a Wi-Fi access point from a laptop, the video will allow you to clearly familiarize yourself with the algorithm; the OS must be at least Windows 7. Also, the computer must have an adapter.

How to find out if you can distribute Wi-Fi from a laptop?

This can be done through the "Device Manager" tab. In it you should look at the “Network adapters” section and find the necessary information. Typically the device is presented under the name Wireless 802.11. Also a prerequisite is the presence of a network connection of any type to the computer.

Please note that when many users connect to the network, the speed may drop. Therefore, it is periodically necessary to disconnect unnecessary users.

Solving the problem using the OS menu

Among the known ways to enable Wi-Fi distribution on a Windows laptop, the simplest is considered to be using the OS menu. To go to the “Network Control Center...” you should:

In these few steps, a virtual device will be created. So from a laptop via a modem? You should again go to the “Center ...” and call up the properties of the work network. Next, you need to allow access for other users by selecting the device through which users will connect.

Removing (deactivating) WiFi distribution from a laptop

If the created network continues to be displayed even after use, then you need to know how to remove Wi-Fi distribution from a laptop. In this case, you again need to go to “Center ...” and select the “Manage wireless networks” section. After that, click on the unnecessary file by clicking on the “delete” button. So, the necessary actions have been completed, and the connection will no longer appear in the list of active ones.

Following the sequential instructions will allow you to solve the problem correctly and as quickly as possible. To do this, there is no need to look for special programs and services to set up distribution for other users from a laptop computer.

Today, almost every person has mobile devices that operate using WiFi Internet. Modern wireless networks have completely changed the approach to using computer devices, thereby making a huge contribution to the computer industry. The concept of virtualization can increase existing capabilities by removing some restrictions on the use of networks. This technique has been implemented by various companies, including Microsoft (VirtualWiFi). Microsoft's VirtualWiFi technology can only create a connection with the AES encryption type, so it will not work for Android devices (they can only work with the TKIP encryption type). In addition, the stripped-down version of Windows (“Starter”) does not have very strong functionality, so they cannot distribute WiFi using this technology.

How to set up and distribute WiFi in Windows?

First you need to take a laptop that uses an adapter with VirtualWiFi technology. You need to configure it and create a network connection using the “Network and Sharing Center” and the “Create and configure a new connection” tab. This is followed by entering the network name in the SSID field, setting a password, entering a security key and saving all settings. After this, you can start using the Internet. (More details will be described at the bottom of the article)

How to distribute WiFi through the netsh service?

You can work with your home WiFi network using the command line, for which you should use the netsh command. You need to create a file in bat format, specify in it all the settings for the future network and simply run it. This will install the VirtualWiFiAdapter driver and create a wireless connection. Once all settings are completed, you must give permission for other users to use the network.

First, you need to press the WIN+R key combination to open the command execution window.

Then type the “cmd” parameter in the column and launch the command line.

In the window that appears, type the command “netsh wlan set hostednetwork mode=allow ssid=”goodkomp” key=”12345678″ keyUsage=persistent”.

The parameter designations are as follows: “set hostednetwork” (network settings), “ssid=”goodkomp”” (network name), “key=”12345678″” security key, “keyUsage=persistent|temporary” permanent or temporary network key. After all the steps taken, a new device “Microsoft Virtual WiFi Miniport Adapter” should appear in the Device Manager.

Now the wireless network needs to be started. To do this, go to the command line again and enter the following command “netsh wlan start hostednetwork”.

Now you need to go to the “Network and Sharing Center”, where a new connection should appear. Next, go to “Network Connections” (“Control Panel” -> “Network and Internet” -> “Network Connections”). Next, you need to click on the connection through which you access the Internet and right-click on it. Select the “Properties” tab, then “Access”. Check the box next to “Allow other network users to use this computer’s Internet connection” and select the connection through which you connect to the wireless network and click on the “OK” tab.

Using the following commands you can view the network parameters:

“Netsh wlan show hostednetwork” - enter this command on the command line. With its help you can see the number of clients connected to the network;

“Netsh wlan stop hostednetwork” - using this command you can stop the network;

Same method only using a text file

Distribute WiFi from a laptop using a text file)

Programs that allow you to distribute WiFi from a laptop

Virtual Router Plus

Free utility - Virtual Router Plus. You can download this program from the software website. After going to the site, you must click on the “Download Latest Release” tab (download the latest version), where links to download the program will be provided.

The program will be downloaded to your computer in a zip archive. The advantage of this program is that it does not need to be installed on the computer itself - you just need to download the archive, unzip it and run the program. In the unpacked archive with the program, you should run the exe file “VirtualRouter.exe”. Then the program itself will open.

The column called “NetworkName” contains access points that will subsequently distribute the Internet. The “Password” column contains the password that is required to access the network. The “Shared Connection” column contains the connection from which the Internet will be distributed. If the initial settings are not satisfactory for one reason or another, they can be changed. To change the password, you need to click on the “Advanced settings” tab, where the additional settings menu will open.

This program has its drawbacks, for example, it often conflicts with drivers and adapters. If a program has a conflict with a driver, you need to find an alternative to the driver software that is available on your computer. If a conflict occurs with the adapter, then it is better to look for another program for WiFi. If a critical error occurs while using the program, the user will be redirected to the developers' website, where the necessary recommendations will be given to resolve the error.

Switch Virtual Router

Advanced users may not be satisfied with the functionality of the Virtual Router Plus program. For such cases, the free Switch Virtual Router utility is perfect. This program does not support Windows XP and Vista operating systems. The program runs under Windows 7, 8, 8.1. You can purchase the program on the developer’s website by just clicking on the “download” tab. After downloading the program, you need to run the executable exe file.

Then the program’s installation window will open, which will greet you with the words “Welcome to ExcelsiorInstaller for SwitchVirtualRouter 3.3.” Below you need to click on the “next” tab. Next, you will be taken to the window for accepting the license agreement, where you need to click on the “accept” tab.

In the shortcut creation window, click on the “next” tab.

Then check the boxes where you need to create shortcuts and click on the “next” tab.

Then the installation of the program will follow.

After installation, you need to click on the “exit” tab.

When the installation of the program is complete, you need to launch it to perform the initial setup.

The “General” tab will open, where there are several columns at the bottom. One of them is called “NameRouterSSID” - in it you need to specify the name of the Wi-Fi access point. The next column is “Password” - in it you need to indicate the so-called network access key. In the “Confirmpassword” column, you must repeat the password. You can also check the “Showconnecteddevice” column if you want to see a list of connected devices to the network. The column “Auto-updateofNetworkstatus” (automatic update of network status) will automatically create an access point when the system starts. The “Soundnotification” column will sound a sound if a new device is connected to the virtual modem.

In the program settings, in the “Language” tab, you can select your preferred language. If you want the program to start when the operating system starts, you should add it to startup by checking the “RunwitchWindows” box (run together with Windows). If errors occur during the initial setup, you should restart the PC and try the settings again.

It is worth noting that not a single implemented software analogue of a Wi-Fi router can replace the functionality of a real one. It is better to buy a router with Wi-Fi support. Only in a hardware router can you very flexibly set up encryption and introduce network access restrictions for a certain set of devices, which will prevent third parties from connecting to the wireless network. Hardware routers have significantly higher adapter power than a laptop. Modern wireless devices have signal amplifiers installed; they distribute the Internet over a greater distance. Another undoubted advantage of such a router is that it does not require turning on the computer for its operation, since the power is supplied from its own unit.

Program for distributing Wi-Fi from a laptop Connectify Hotspot

Connectify Hotspot is a small program for creating a wireless access point on a laptop. The program is compatible with Windows 7, 8, 8.1. The device that will be selected for the access point must have an Internet connection, but it does not matter what type of connection is involved, be it 3G or a regular ADSL connection.

In the program menu, you can view connection statistics. You can view reports on transmitted and received information. The program's interface is easy to understand, making it great for novice users. The Wireless Access Point Creation Wizard will help you make all the necessary settings in a few clicks. The function of minimizing the program to the system tray will help avoid desktop overload.

One of the disadvantages of such a program is the lack of support for older operating systems such as XP and Vista.

How to use Connectify Hotspot

The program has an English-language interface, but in itself it is intuitive. First you need to download the program, then run the installation file and install. After installation, you will need to restart your computer so that the program can install drivers for the network card. After the reboot, you should launch the program. Next you need to fill in the fields:

HotSpot Name is the name for the wireless access point;
Password – you must specify a password in the column;
Internet to Share – here you can specify the adapter that is used for the Internet. There is no need to specify a Wi-Fi adapter, as it is required for Internet distribution;
Share Over - this column indicates the Wi-Fi adapter itself, with the help of which the Internet will be distributed;
Sharing Mode – network connection type. The most secure network is WPA-2;
Next, you need to click on Start HotSpot to complete the creation of the access point.

The main advantages of the program:

Creating an access point without using a hardware router;
Connection creation wizard, which greatly simplifies the initial setup;
Availability of several data encryption methods;
Controlling the program using the icon located on the toolbar;
A function that will help protect third parties from connecting to the network;
Possibility of connecting mobile phones and game consoles (PS3, Xbox360) to a wireless network.

MyPublicWiFi

First you need to download the program from the official website. After this, run the installation program, and then restart the computer to install the driver software for the network card.

How to use the MyPublicWiFi program:

Right-click on the program shortcut and select “Run as administrator”;
In the program window you need to set the “Automatic Hotspot configuration” parameter. Then, in the “Network name” column, specify the name for the wireless access point. In the “Network key” column you must specify the network key (password);
Next, you need to select the connection type, usually a local network connection;
Once the setup is complete, you can start distribution. To do this, click on “Set up and Start Hotspot”. After the configuration check is completed, you can detect a network connection through which you can access the Internet.

You can now join the connection using your phone or tablet. After the device detects a new network, you need to enter the created key (password). To stop Wi-Fi distribution, you need to click on “Stop HotSpot” in the program window, after which the distribution will be stopped.

Share WiFi with Windows

A simple way to distribute WiFi is the built-in MS Virtual Wi-Fi adapter. Using it you can set up a wireless network connection.

To do this, you will need to perform several sequential steps:

You need to go to the “Start” menu, select the “Control Panel” tab, then “Network and Internet”,

then “Network and Sharing Center”;

In the lower menu “Change network settings”, select “Creating and setting up a new connection or network”.

In the window that appears, you need to click on the “Creating and setting up a new network” tab, then on “next” and fill in the fields that appear: “Name of the wireless network”, you can use any name, “WiFi password”, required to connect to the network, “ Security Type", it is recommended to select WPA2-Personal;

At the end, check the “Save settings for this network” tab and the network is ready for use.

Thus, it turns out that you can distribute WiFi from a laptop in various ways - you just have to decide which method you like best.

Hello everyone, Yuri is here and on this sunny day, I would like to write a post about whether a laptop can distribute wi-fi. To be honest, I didn’t know about this topic until I did a little research on the Internet.

It turned out that it is possible, and there are different ways, which we will talk about in this article, so read carefully and write your comments.

In fact, for this purpose it is better to use some kind of routers, although you will have to spend a little money on them, but you will be able to get good Wi-Fi connection. And now, without such a network, it’s very difficult, sometimes you’re sitting in a cafe, and then they write to you on Skype that you need to discuss this or that project.

In general, Wi-Fi is difficult to overestimate, since without it it is now very difficult for a modern person.

Method 1 is to purchase this router. Well, you will spend 1500-2000 rubles, but you will be able to distribute the Internet and receive great respect from others. Well, I’m kidding, I don’t know for what purpose you need to distribute, perhaps for yourself.

Method 2 is programs for distributing wi fi. Among which you can download for free are: mHotspot, MyPublicWiFi, Connectify, virtual router plus, CommView for WiFi, Insider. The programs, as I already said, are free, download, install and start working on the Internet.

Method 3 is a little more complicated; it means that you will have to write commands on the COMMAND LINE. Yes, it turned out to be a tautology, but it is so, if you do not know how this is done, then read this post carefully.

Can a laptop distribute wi fi?

If you have Windows 7 or 8 installed, then you can try to make a distribution using the computer functions. To do this, click on the “Wireless Network” shortcut and select “Properties”.

Now, we need to click on the “Access” button and check the “Allow other users to use the Internet connection” checkbox.

Don't forget that now we will need the command line. To do this, go to “Start” - “Accessories” - “Command Line”.

In the line we will need to write the following code “netshwlanshowdrivers”. Just write it without quotes.

It doesn’t support distribution for me, since I’m writing from a computer that doesn’t even have a router. But this should be written if you support distribution:

Now that you have checked through the command line that everything is working properly, you will need to enter the following code “netshwlan set hostednetwork mode=allow ssid=softhardware.ru key=softhardware”, where ssid is the name of your network and key is the password from your Wi-Fi.

Well, if you have a network running on your laptop, then it will be able to distribute. The operation is very simple, as you can see, so it can be done in a couple of minutes, well, if, of course, you know what to prescribe and where. I hope that I didn't miss anything and that the information was useful to you.

Sincerely, Yuri Vatsenko!

Perhaps I will greatly surprise someone, but if you don’t have a router at hand, and you need to distribute the Internet, you can provide communication throughout your entire apartment or small office directly from a laptop or from a desktop PC equipped with a simple wireless adapter. This can be especially useful if you bought a smartphone or tablet and would like to access the Internet from it without buying a router (for example, as an emergency connection test without purchasing additional equipment).

Under such circumstances, you will be able distribute Wi-Fi from a laptop connected to the network using both a conventional wired and wireless connection. The described method is suitable for any version of Windows, starting from Windows 7. If you are a supporter of non-standard approaches, or prefer not to install additional software when installing products, you can immediately proceed to the method where Wi-Fi distribution will be established using the Windows command line. See also:, and.

Distributing Wi-Fi from a laptop using Virtual Router/Virtual Router Plus

Many users interested in distributing the Internet via Wi-Fi from a laptop have probably heard about an application such as Virtual Router Plus, or simply Virtual Router. I'll tell you in more detail about each of them.

Virtual Router Plus is a free application that is a slightly modified Virtual Router. This software is available under the GNU GPL license, as a result of which the open source product was slightly modified and redesigned, after which we received the Plus version. The product is also completely Russified. The main disadvantage of this application is that when installing the product, a lot of unnecessary software ends up on the user’s computer, which is not always possible to refuse. At the time of writing, a clean version of Virtual Router Plus without unnecessary utilities can be downloaded from the Softonic website.

The method for distributing a network using this product is quite clear and simple. The only drawback that you will encounter if you try to set up distribution using Virtual Router Plus is that for the connection to work, the laptop must be connected to the network not via Wi-Fi, but via a wire.

The operation of the program and the principle of setting up communication are simple and banal to the point of disgrace. When you launch the application, you will see the main modular window where you will need to set a number of parameters:

network name (SSID) – the name of the connection that will be displayed in the list of available hotspots;
password – a corresponding code word or set of characters with which your connection will be protected;
general connection – here you should select the connection that your network adapter uses to access the network.

Once all parameters are set, use the button to launch the application at the bottom of the window.

After a few seconds, a notification will appear on the screen indicating that the connection has been successfully created and you can now connect to it using any portable device. As you can see, our connection is now visible in the list of hotspots.

If your laptop is connected to the network in a similar way, that is, via a wireless connection, it will be possible to launch the program itself, but it will no longer be possible to establish a connection to the virtual router - when identifying the IP address, a software failure will occur that does not allow communication to be established. Under all other circumstances, the program will be an excellent free solution for distributing Wi-Fi via a laptop.

Another analogue of the software product described above is Virtual Router. This utility is based on the same source code from which Virtual Router Plus was compiled, and it works in a very similar way. In addition, by downloading the utility from the official website, you do not risk adding a lot of crap to your PC, such as an additional Internet browser, search bars and changing the web browser home page.

The program has not been translated into Russian, which does not detract from its other advantages: lightness, simplicity and elegance. I recommend downloading this module from the official web resource of the project. Just like in the Plus version, you specify the name of the network, the password for it and select the active wired connection that provides access to the Internet, after which you press the main button “Start Virtual Router” and voila - you're done.

Using the Windows Command Line

Finally, I came to the last method of organizing distribution over Wi-Fi, without using auxiliary paid or free applications. The described technique works perfectly on both Windows 7 and 8/8.1 or 10.

To begin, press Win+R and enter the command “ncpa.cpl”. As a result, a list of network connections will appear on the display. Right-click on the wireless connection and go to Properties.

Now you need to go to the “Access” tab and check the box next to the option “Allow other users to connect to this PC’s network”

Let's launch. To do this, right-click on the Start button and select the “Command Prompt (Administrator)” option.

When working in Windows 7, click on the “Start” button, find “Command Prompt” in the list, and right-click on it. In the context menu, find the “Administrator” option.

Now it's time to run the "netsh vlan shou drivers" command and see what this command tells us about the support of the hosted network. If this item is active, everything is in order, you can proceed further. If not, then either your network card on your laptop is too old, or the adapter driver is installed incorrectly. In the latter case, you will have to reinstall it from the official website of the device manufacturer.

The initial command available to enter in order to turn our laptop into a router is as follows: netsh vlan set houstednetvork mode=allou ssid=lap_test key=87654321. You can change the name of the network (ssid) and its password (key) to something more convenient for you.

When the command is entered, you need to get visual confirmation that all the actions caused by the command we entered were performed correctly: wireless access was provided, the network name was accepted, and the key (in other words, the password) was also changed. You can enter the following query at the prompt:

netsh vlan start houstednetwork

Having entered the last of the commands, an inscription should appear on the screen indicating that the launch of the hosted network was successful.

Finally, the last query that can serve you well, and which will certainly be useful for determining the status of your connection, the number of nodes connected to it, or the Wi-Fi channel, is netsh vlan show houstednetwork.

If you decide to pause the distribution, you may need a command like this:

netsh vlan stop houstednetwork

The only significant drawback of this method is that after each reboot of the PC, the distribution is suspended, and it has to be started again manually. To automate this process and not enter a request to start the network manually each time, you can create a bat file and add it to startup, or launch it manually if necessary.

As you can see, setting up Wi-Fi distribution on a laptop is absolutely not difficult. The whole process is described quite clearly and informatively, so you are unlikely to do anything wrong if you read the instructions presented above in full before setting up the distribution.