The computer does not see the 4g modem. What to do if the computer does not see the Yota modem

This unpleasant situation is familiar to many Internet users who use modems from mobile operators to access worldwide network. Your computer doesn't want to see your device and your relaxation or productive work is at risk. But don’t immediately panic and rush to a repair shop or electronics store. It is better to try to independently identify the cause of the malfunction and try to eliminate it. So what can an ordinary user do to detect a modem?

There are several reasons why a computer or laptop does not detect a modem. For example, USB port failure, old drivers, viruses, and so on. And if in the event of a hardware failure there is little that can be done, then if software glitch Any user is quite capable of eliminating this annoying nuisance on his own and finally getting online. Let's go through a few steps together to recover. normal operation modem

Step 1: Check the indication

Almost all modems are equipped with a light indicator on the case. See if it's on fire? It is quite possible that there is simply no reliable coverage at your location cellular network and therefore the modem does not work correctly and does not perform its main function. Move to another point in the area and the problem will be solved by itself; the device will detect a stable signal with base station provider and Internet access will appear.

Step 2: Check the USB connector

The modem is usually connected to a computer via a USB port, so it is logical to assume that this connector on your PC is faulty. Try plugging the device into another similar port. If you are using a USB extension cable, then if you have the same cable, change it. Do not use the connectors on the front panel of the system unit case for the modem, as this leads to loss of power and strength of the received signal.

Step 3: Update Drivers

There is a possibility that your USB modem drivers are hopelessly outdated and need to be updated urgently. To see the status of the device, go to "Device Manager" on PC. For example, let's take a computer with Windows 8 on board; in other operating systems from Microsoft, the algorithm of actions will be similar.

Step 4: Update Hardware Configuration

Sometimes it happens that the operating system does not recognize some devices correctly and updating the hardware configuration can help. By analogy with Step 3, open "Device Manager" and start the process by clicking on the corresponding icon on the top toolbar. Did not help? Then let's move on.

Step 5: Updating the Operating System

Microsoft often releases important updates for Windows and uploads them for downloading on their servers. Try to install them in a timely manner, because new devices may not function correctly without the latest packages and may not even be detected by the system. So don't turn it off automatic update OS and keep the software up to date.

Today we will try to figure out the problem when the router does not see the 3G (4G) USB modem after connecting. If you came to this page, then you probably understand what I mean. The problem is simple and clear. There are routers that can connect to the Internet via a 3G modem connected to a USB port. So, in the process of setting up a router, many encounter a problem when after USB connections modem, the router simply does not detect it. There is nothing in the router settings, where the modem connection status is displayed, or it says that the modem is not defined.

There are several reasons why you might encounter this problem. And now I will tell you about them. Most often, this problem is faced by those who are not serious about choosing a router, and those who do not read my articles :) Now you will understand why.

What to do if the router does not detect the USB modem

1 In most cases, when we get an idea to buy Wi-Fi router, we already have a modem and the Internet is connected. And few people know that not all routers, even those that have USB ports, support connection of 3G/4G modems. And those that support connecting to the Internet via modems do not work with all modem models. It is precisely because the router is compatible with the modem that the problem most often arises when the router simply does not see the modem.

I even wrote a separate article where I talked in detail about these points. And I prepared the same article. Be careful when choosing!

What to do if you have already bought everything, and it turns out that the router and modem are incompatible:

If you looked at the list of modems compatible with your router and did not find your modem there, then you can try updating the router firmware to the latest version. Perhaps support for your model has been added there. Although, of course, it is unlikely. You can also search for information using the following query: “router model + modem model.” Perhaps someone has already encountered this problem.

If possible, simply return the router to the store and get another one that supports your modem. Or, change the modem to match your router.

2 Update your router firmware (already wrote about this above), and do a factory reset. Perhaps after this, the router will be able to detect your modem. 3 Connect the modem directly to the router. No extension cords or anything like that. USB extension cable can be used, but not recommended. And if necessary, then take one that is not too long.

I myself have already encountered a problem when the modem was not detected by the router due to the extension cord being too long. Many people use extension cords to raise the modem higher for better reception.

4 Perhaps you have a slightly different problem. The router sees the 3G modem, but simply cannot connect to the Internet through it. In this case, you need to make sure that you have configured the router correctly, the modem is in an area of stable network reception, and there are no restrictions from the operator.

I have already written instructions for setting up a modem on ASUS routers and TP-LINK:

Check your settings. In the section with setting up your Internet connection, or on the "USB" tab, you will see all necessary information via modem.

If you connect a modem and the router does not respond to it at all (no information in settings), then most likely you will have to change either the modem or the router. I remember a long time ago I configured such a scheme on the TP-LINK TL-MR3220 router. I couldn’t set it up, but after installing firmware 10 and dancing with a tambourine, everything somehow worked.

Using a Beeline USB modem allows you to access information at any convenient time. After purchasing a modem, you can safely enjoy watching movies at the dacha and send documents while traveling. Setting up the gadget is not difficult. Difficulties that arise are most often associated with equipment features or improper installation.

Connecting a modem is possible on most personal computers and tablets. The operating systems supported by the device are indicated on the packaging. The modem works on operating systems Windows older than XP, Mac 10.5, 10.6, 10.7. Beeline does not guarantee compatibility of the gadget with Linux OS.

Hardware requirements for stable operation devices are not high. The modem will run on a Pentium 4 with a frequency of 1 GHz and 50 megabytes of free hard disk space.

Connecting a Beeline USB modem

When purchasing a modem, the salon consultants offer simultaneous connection optimal tariff plan. On Beeline you can use the Internet almost without restrictions Highway series tariffs. In showrooms, modems are sold with the ability to use 4G networks, which are the fourth generation of wireless communications.

After the first connection of the gadget to one of the available USB ports, the application is downloaded, and in some models it is offered to use the web interface. How to connect a 3G or 4G modem to work?

The network type is configured in the application. Go to the “Settings” tab and select “Network Settings” by default. After this, the Internet via the modem will use the most modern, stable signals. If the device connects to low-speed 2G networks, then force it to select networks latest generation Changing the network settings to “WCDMA and LTE only” will help.

Connect to a computer or laptop

After purchasing the device, owners may experience difficulties in how to connect the modem to the laptop and desktop computer on Windows 7-10. Sequence of actions to start working with the device:

Turn on the laptop and wait for the download to complete.
Connect the device to any USB connector.
If necessary, activate the SIM card in the device.
The system should automatically detect the modem as new disk, which can be seen in Explorer.
Equipment installation occurs automatically. If you have any difficulties, you can download the installer via Autorun.exe.
To start the Internet, you need to confirm your acceptance of the license and wait for the installation to complete. After the process is complete, an Internet connection shortcut should appear.

Connect to the tablet

To connect a 4G modem to your tablet, it’s also a good idea to first make sure that your tablet has USB inputs or mini-USB. If there is a difference in connectors between devices, then an adapter will help. Produce fine tuning The easiest way to access Beeline is from a computer, and then reconnect the gadget to the tablet. For the Internet to work, you will need to specify in the tablet settings mobile type networks and connect the device. In most cases, the configuration of authorized Beeline devices occurs automatically.

How to configure and install drivers for the modem

Loading software and drivers occurs immediately after connecting the device. The program provided by Beeline for setting up an Internet connection via a modem is intuitive clear interface, which allows you to set up a 4G USB modem from Beeline on a computer or laptop yourself, without the involvement of specialists. Software update files can be found on the Beeline website.