How to clean your computer so it doesn't slow down. How to clean sewer pipes in different ways

Knowing how to cleanse the intestines at home, you can protect yourself from various diseases. A large amount of waste accumulates in the colon, which becomes a good breeding ground for pathogenic microorganisms.

Why does a person need to cleanse the intestines?

Many doctors believe that most diseases begin in the intestines.

Colon cleansing is indicated for people who:

• eat foods containing many harmful food additives;
• often consume fatty foods and alcohol;
• like to visit fast food establishments;
• prefer animal food to plant products;
• do not play sports;
• live in large cities.

Flatulence, bad odor, skin diseases, constipation and fatigue are the main signals that the intestines are clogged with unnecessary substances and waste. First of all, you need to cleanse, lead to a healthy lifestyle and then maintain yourself in normal condition.

Neglect of cleaning can lead to intoxication of the body, heart disease, migraines, accumulation of many worms and accelerated aging.

How to cleanse the intestines with medications?

To effectively cleanse the intestines, strong laxatives are often used, which are available in the form of powder, capsules, tablets or liquids.

Among the most well-known drugs, the following should be mentioned:

• Fortrans;
• Lavacol;
• Moviprep;
• sodium or magnesium sulfate.

Their action begins within 3-4 hours after application. You can buy them at the pharmacy without a prescription, but it is very important to follow the instructions exactly so as not to harm your body. It is necessary to cleanse with these drugs very rarely, since laxatives remove not only harmful substances, but also useful ones.

Activated carbon is considered one of the most useful, cheap and safe cleaning methods. It is often used for intoxications of various etiologies, since this powerful adsorbent can quickly “attract” toxic compounds and remove them out. And this despite the fact that they significantly exceed it in mass and volume. Experts advise drinking it together with psyllium husk, which mechanically cleanses the intestinal walls.

Taking large amounts of charcoal can cause dehydration, so you should drink plenty of water during the cleanse. As a rule, charcoal is taken no more than 3 times a day, 6-7 tablets at a time (based on the calculation of 1 piece per 10 kg of body weight) 2 hours before meals. Course duration is 3-6 days.

If side effects are observed (nausea, vomiting, abdominal pain, constipation), charcoal use should be stopped immediately.

Traditional recipes for cleansing

In folk medicine there are many simple recipes that help cleanse the intestines of feces. You can choose any method at your discretion.

Each one accumulates a large amount of garbage as it works. This includes tmp directory files, registry entries created by programs but not used, logs, logs. All this helps reduce the speed of the computer. This article will provide information on how to speed up application response times and make working with the OS more comfortable.

If you do not perform these actions regularly, the speed of opening context menus, folders, and launching programs will slow down. The free space on your hard drive will decrease all the time, which will lead to freezes or even the inability to load the operating system.

Windows built-in tools

The story about programs that can clean your computer should begin with the built-in utility. It works less efficiently than third-party products. It is worth paying attention to for users who rarely work on a computer, as well as those who do not have the rights or ability to install software. The utility is included by default with all modern versions of Windows. To run it on any OS, just enter the line “cleanmgr” in the input field of the “Run” window. Now all that remains is to click on “OK”. The main utility window will appear on the display. It needs to indicate which partition the program will continue to work with.

HDD analysis will continue for several minutes. Its speed is affected by the size of the hard drive, the percentage of defragmentation, and the time that has passed since the last time a similar operation was launched. When the scan is finished, the utility will provide a superficial report and prompt you to select groups of files to delete. Next to each item there is a checkbox, and opposite it is written the number of megabytes of information occupied.

To check the boxes next to the names of all groups. Click "OK" and confirm your intention. To remove more unnecessary information from HDD partitions, in the main utility window you need to click on the “Clean up system files” button. Using the approach described above, you will have to spend no more than 10 minutes to complete all the steps. As mentioned earlier, standard Windows tools are ineffective, which means that during the scan the utility did not find all the garbage.

Third Party Products

One of the most popular programs for optimizing PC performance is CCleaner. Many users prefer it, as you can use this tool literally in a couple of clicks. The application interface is as simple and clear as possible, so even an inexperienced user will not need to study the reference manual.

Installation

CCleaner is an absolutely free product, so you should download it only from the official resource. In addition to the opportunity to get the latest version of the utility, you will know for sure that you will not infect your PC with a virus. The program requires installation before cleaning the computer. After launching the installer, Windows will warn the user about the danger of executable files downloaded from the world wide web. Do the following:

1. Select "Yes".
2. A window will appear on the display. In it you need to select the language that is preferable to use in the interface.
3. After clicking on “Next”, preliminary settings will be available to the user. All parameters will be clear to any user who has at least once installed programs in Windows.
4. Now all that remains is to click on “Install” and wait for the process to complete. Installation is quick. It will take one or two minutes.

How to clean up your computer: deleting temporary documents

In the main window of the program there is the inscription “Cleaning”. After clicking on it, the utility will perform an analysis, the function of which is similar to that organized in the built-in tool. The columns on the left indicate the names of groups of files that will subsequently be deleted. Some of them are checked by default. Check the boxes next to unnecessary files. Click on "Analysis" and wait while the application collects data. The completion time of a function is affected by the amount of garbage on the system.

After scanning, a window with a detailed report will appear on the screen. In it you can view the location of all documents being deleted and the amount of data being freed. To clean your computer, click on the appropriate button. Files important for the operation of the operating system will not be deleted. However, if you don't want to get rid of your browser history or Windows error logs, it's worth examining the report first and carefully reviewing the names of the groups that are flagged.

System registry

In general, the speed of a computer depends little on the garbage in the registry. However, disorder in it negatively affects the stability of specific programs. Partitions and records should be cleaned when utilities that were functioning normally suddenly began to fail. If it is impossible to install new applications due to errors during the installation process, it makes sense to optimize the registry:

• Click on the icon labeled “Registry” in the left block of the program.
• Without unchecking the boxes, click on “Search”.
• The utility will begin scanning, which will last several minutes.
• After it is completed, click on "Fix".
• CCleaner will offer to create a backup copy of the data, which it will later erase.
• After selection, a window will appear on the display with detailed information about the partitions and keys to be deleted. There is a “Fix” button in it, which you should click on.

Service

The "Tools" section of the CCleaner utility provides the user with several tools for manipulating operating system settings, installed applications, and hard drive partitions. The main features of this section that are worth paying attention to are programs and management of startup entries.

It includes those applications that run either with Windows or after the user logs in. Startup should be cleared of unnecessary or rarely used programs. It is unlikely that you will be able to speed up your computer using this method, but the OS boot time will be noticeably reduced. The application uninstallation function is completely similar to the standard Windows tool. The advantages of CCleaner are greater visibility and quick access to functionality.

Revo Uninstaller

Revo Uninstaller differs from most programs aimed at removing garbage from a computer's HDD. While most utilities erase already accumulated data, Revo Uninstaller combats one of the reasons for PC clutter - improper software removal. During its operation, the application monitors the activity of programs, remembers which files were created after each specific one, and what data was written to the registry and changed in it.

By removing a program using Revo Uninstaller, the user can be 100% sure that there is no debris associated with it left on the computer. Utilities installed before being equipped with the application in question are also uninstalled without leaving any tails. This is possible thanks to the built-in complex analysis system. The user just needs to click on the “Uninstall” item, and after scanning, check all the inscriptions. Anyone who likes to fully control the operation of programs will be able to study the detailed report. It records all paths to files and registry settings that will be deleted.

Conclusion

Remember: cleaning your computer once is not enough. Windows of any version requires regular service. The more programs are installed in the operating system, the more often work is done on the PC, the less frequent maintenance should be.

Modern ovens, especially electric ones, are often equipped with self-cleaning systems. But the functions of pyrolysis and catalysis greatly increase the cost of the unit.

Most users prefer ovens with conventional, hydrolytic cleaning. This is when you put a baking sheet with water in a preheated oven and wait for the steam to melt the fat.

But water alone is often not enough. If the stains are stubborn and old, you need auxiliary cleaning products. They will be discussed below, but for now there are a few basic rules.

Basic rules for oven care

1. The more often, the easier. If you wipe the inside surface of the oven after each cooking, and steam the oven with water and detergent once a week or a week and a half, there will be practically no need for global cleaning.
2. To make the dirt easier to handle, warm up the oven a little by turning it on at 50°C for 15–20 minutes.
3. Immediately before cleaning, remove the trays and remove the side guides. If the design allows, also remove the door and glass. It is more convenient to wash all this separately.
4. Do not use abrasive sponges or metal scrapers. Scrubbing off grease with them can damage the oven enamel. It is better to work with a sponge or soft cloth.
5. Never use any cleaning agent, especially a chemical one, on the oven fan or heating elements.
6. After cleaning, leave the oven door open for a couple of hours to allow it to dry and any odors to dissipate.
7. Is the smell still there? Dissolve 10–15 activated carbon tablets in a glass of water and place in the oven for several hours. Charcoal absorbs excess aromas.

Baking soda works great on fresh stains and removes brown deposits from heat-resistant glass.

You can use a soda-based paste to clean the oven or use a simpler method.

Apply baking soda to the oven walls (you can do this with a damp sponge). Spray them a little with water from a spray bottle and leave for 60 minutes.

After an hour, wash the oven with a sponge soaked in soapy water and wipe dry with paper towels.

Soda and vinegar work better for old stains.

When vinegar and baking soda react, carbon dioxide is released. It destroys even dried greasy deposits.

Treat the inside surface of the oven first with table vinegar, then apply baking soda with a damp sponge. Leave the oven like this for a couple of hours, and then wash with warm water.

If the stains persist somewhere, rub them with a sponge soaked in vinegar.

There are two methods for cleaning the oven with lemon: using freshly squeezed lemon juice and powdered citric acid.

1. The first method is more suitable for fresh stains. Mix lemon juice and water in equal proportions. Using a sponge, treat the oven walls with this solution. Let it sit for 40-60 minutes and then wipe everything down with a clean, damp cloth.
2. The second method copes with heavy greasy deposits and is suitable for. Fill a deep baking tray or other heat-resistant container with water and citric acid. For ½ liter of water you will need one packet of citric acid. Place the baking sheet in an oven preheated to 200°C for 30–40 minutes. Then let the oven cool slightly and clean it thoroughly. Stains that won't come off immediately can be scrubbed off with a slice of fresh lemon.

The effectiveness of the method is demonstrated in the following video.

Baking powder, or simply baking powder, can be used not only for baking, but also for cleaning baking sheets and the oven after baking. After all, in essence, it is the same soda combined with citric acid.

Simply wipe the oven walls with a wet cloth and treat with baking powder diluted in water. You need about 2-3 tablespoons of water per packet of baking powder to get the consistency of thick semolina porridge.

Leave the product on the oven surface for 2-3 hours. The greasy deposit will form into lumps and will be easy to remove.

Salt is an accessible remedy that is best used immediately after cooking. When heated, sodium chloride makes greasy deposits loose, which means it will be easier for you to wash off the dirt.

Sprinkle salt on horizontal surfaces (baking trays, bottoms) until the oven has cooled down and leave for half an hour.

If the cabinet has cooled down, turn on the heating (≈100 °C). When the salt turns golden brown, turn off the oven.

When the temperature drops, wash all surfaces thoroughly with warm, soapy water. Finally, dry everything with paper towels.

Many housewives consider this method the most effective. Ammonia really does a great job of corroding grease and burns that appear in the oven over time.

The oven can be cleaned using ammonia using two methods.

1. Cold method. Simply apply ammonia to the surface of the oven using a sponge or spray. Leave it overnight and wash the oven with detergent in the morning.
2. Hot method. Preheat the oven to 60°C. Turn off. Place a glass of ammonia on the top shelf. On the bottom - a bowl of boiling water. Close the door and leave the oven like that for eight hours. This cleaning method is convenient to use at night or during the day with open windows and a minimum of household members in the apartment. After the required time has passed, add detergent to the ammonia that was in the oven and wash all surfaces with this solution.

After ammonia, the oven should be ventilated.

Do you clean your oven any other way? Share your methods in the comments.

Over time, the system becomes full of garbage that slows down the operation of the laptop: unnecessary programs, temporary files, registry entries. You can clean the system and speed up its operation using built-in tools or special software.

How to clean the system

The main thing in cleaning your laptop from debris is regularity. If you have never tried to clean the system, then so much unnecessary data will accumulate in it that you can forget about normal operation. Many users immediately begin to think that the hardware no longer holds up, and they need a new laptop or at least a complete reinstallation of the system.

Reinstalling will solve the problem, there will be no garbage left, but you can speed up the system in a less radical way, which does not involve deleting user data from the laptop. Even cleaning with built-in tools will have a huge positive effect. But in order not to forget anything, let’s create a clear sequence:

1. Cleaning the desktop. Remove unnecessary files and shortcuts to unused programs.
2. Checking documents, including downloaded torrents. A typical situation: I downloaded a season of a series, watched it, and left it as dead weight on the disk. Delete - the more space, the faster the system works.
3. Uninstall unused programs.
4. Cleaning the disk from temporary files.
5. Cleaning the registry using CCleaner.
6. Checking the startup list.

If the file is not deleted, use the Unlocker utility. It independently unloads from memory the processes that are occupied by the file, helping to quickly clean the system of data that, when deleted, gives the error “Unable to delete. The file is being used by another program."

Uninstalling programs

Try to ensure that only the applications you really need are installed on your laptop. It is better to clean the system of software “garbage” in order to free up space and slightly increase performance. There are several ways to remove a program:

1. Through the “Uninstall a program” applet in the control panel.
2. Using your own uninstall file Uninstall.exe.
3. Using the capabilities of the Revo Uninstaller utility (there is a free version).

The third option is preferable, because Revo Uninstaller removes the program completely, including erasing entries in the system registry. After a standard uninstallation, traces remain that are not beneficial to the system.

After uninstallation, Revo Uninstaller will offer to clean the system of remaining debris. Select a mode and click "Scan".

The program will show the remaining files and folders. Select them and click "Delete".

With advanced scanning, you can erase entries in the registry, so that the application will be destroyed without a trace.

Deleting temporary files

A lot of temporary files accumulate in the system, clogging up memory, which need to be gotten rid of.

The same operation can be performed using the free cleaning utility CCleaner:

Deleting temporary files will empty the Recycle Bin, so make sure there is nothing useful in it before you start cleaning your system. Additionally, you can clean up system files:

Another list of data that can be deleted will be generated. Among them will be old updates, which sometimes take up a lot of space on your hard drive. After generating the list, click “Ok” to clear it.

Cleaning the registry

A huge amount of garbage also accumulates in the system registry - entries about programs that were deleted long ago. If you uninstalled using Revo Uninstaller, then there will be no entries left, but it won’t hurt to clean the registry in any case - there are still incorrect extensions or incorrect firewall rules. Manual deletion is out of the question: it is too time-consuming and dangerous - you can erase the wrong entry and get errors in the system. The registry should be cleaned using CCleaner:

If you have never performed such a procedure before, you will immediately notice that the system has become faster and more stable.

Setting up autorun

To speed up your laptop boot time, you need to clear the startup list. It adds programs that are loaded with Windows. The more applications there are, the longer it takes to launch them. To clear the startup list of garbage:

In the standard startup list, you can only disable programs, but you cannot delete them. If you want to literally clean your startup of junk to speed up your system, use CCleaner.

Since you have opened the “Tools” tab in CCleaner, use another convenient laptop cleaning function – duplicate search. Everything is simple here: run a search, look at the result, select which version of the file you should get rid of (usually they are completely identical and created at the same time), and click “Delete selected”.

How and with what to clean suede?

Let's start with the basics. Natural suede is leather with special finishing. The outer layer is the inner layer, which contains natural collagen. This allows the material to be cleaned quite easily. Suede is absolutely not afraid of water. After getting wet, it dries and restores its previous shape. But there is one caveat. Many unscrupulous manufacturers, when cutting a product, make smaller parts and then, by steaming, give them the required shape. This is a pressing of suede. Such things can shrink to their original size after getting wet. Therefore, suede should be dried flat.

So, we clean gold at home, then you will learn how to clean products made of yellow and red metal. There are also some guidelines for cleaning white gold jewelry.

Ammonia, water and washing powder

Buy ammonia at the pharmacy and combine it with washing powder or dish detergent. To prepare the solution, take the components in the following proportions:

1. glass of water;
2. a teaspoon of ammonia;
3. tablespoon of your chosen detergent.

Now let’s start figuring out how to clean gold with ammonia. First you need to boil water, then pour it into a deep bowl. Pour detergent into it and pour ammonia. Mix the mixture well, the powder should dissolve well in the water. Then we place the items in this mixture, let them lie there for two hours, then wash the item under running water, then wipe it dry with a soft cloth.

Dish detergent

So, first of all, let's go through the safest methods, and we will start from the upholstery material. Below we will look at a list of the most common types of furniture upholstery. As a rule, furniture stores offer either fabric or leather (usually leatherette, of course).

Cleaning gold items with stones

If your gold items are decorated with precious stones, then cleaning should be done very carefully. Especially with stones such as malachite, amber, pearls, turquoise, opal and moonstone, which do not tolerate high humidity. Rings and rings with stones can be cleaned using an ear stick, which should be dipped in cologne and gently clean the stone from below and above. It is not recommended to clean the ring setting with sharp objects, as this can damage it and scratch the stone.

Cleaning gold with stones can also be done with alcohol if you need to remove old greasy stains from them. It should be remembered that if the stones are glued, then under no circumstances should they be immersed in water. After applying the alcohol solution, it is enough to simply wipe them with a cloth soaked in water and dry them.

How to properly clean an iron?

After soaking, rinse the product in running water, dry and rub with a soft cloth, or even better, suede. Instead of soaking, you can wipe the silver with cotton swabs soaked in alcohol or cologne, or with a cloth on which a little lipstick has been applied. Such items need to be cleaned regularly, because old dirt will be very difficult to clean from them.

How to clean 925 sterling silver

Such products should only be cleaned with special products or in a workshop. Any solutions, and especially abrasive substances, can cause irreparable harm to these valuable things.

How to clean silver alloys

Cutlery, figurines and other household items are often made from an alloy of silver with nickel and copper, or with the addition of zinc or iron. Such alloys are called cupronickel or nickel silver. To clean, they are placed in a zinc container filled with salted water for 3-4 hours.

How to clean rhodium plated silver items

Sometimes jewelry is plated with rhodium. It is quite chemically resistant, but wears off over time. Do not use any abrasive materials or brushes to clean such products, only a soft cloth.

Vinegar and acetone are contraindicated for cleaning faux fur at home.

Is it possible to wash fur?

Under no circumstances should natural fur be washed! It will lose its appearance, fade, and the base will become brittle. In addition, shrinkage of the fur product will inevitably occur.

With faux fur everything is much simpler. Faux fur is a knitted fabric with a pile, so items made from such fur can be washed in a washing machine at low temperatures on a delicate cycle. But only if the knitted base is synthetic; for a cotton base, washing is unacceptable. After spinning, the product must be dried on a flat surface, unfolded. When the fur becomes slightly damp, the pile needs to be combed, otherwise after drying it will turn into icicles.

Prepare a solution of hot water and soda. Place foil on the bottom of the container and place decorations for cleaning. Pour in the prepared solution of water and soda and leave for 8 hours (overnight). Rinse well in clean water.

Gold cleaner N 7 (soda+water+detergent)

The baking soda-foil cleaning option replaces detergent, and the process itself takes little time (up to half an hour).

Compound:

1 glass of water

1-1.5 tbsp baking soda

1/2 tsp dishwashing liquid

How to clean:

• Your favorite gold jewelry will stay clean and shiny longer if you take note of a few simple tips:
• Before you begin household chores, such as washing dishes, cooking or general cleaning, remove your gold rings and bracelets.
• Remove gold jewelry before taking a bath or shower, or before going to the gym.
• Some ingredients in topical medications and cosmetics can negatively affect the appearance of your favorite rings, earrings or bracelets. Therefore, before medical or cosmetic procedures, also remove jewelry. An alcohol solution of iodine can leave dark spots on the surface of a precious metal. To remove stains, soak the jewelry in a hyposulfite solution for 30 minutes and then rinse with water.
• Do not store jewelry in cardboard boxes or boxes, as cardboard may contain sulfur, which has oxidizing properties.

Knowing how to clean gold at home will make it easy to update the look of your favorite gold jewelry any time.