How to open the router settings TP link. How to enter the settings of a TP-Link router: step-by-step instructions

Hello dear friends. Nowadays, unlimited Internet will not surprise anyone, as well as its high speed. People are massively buying tablets, laptops and smartphones that have a built-in Wi-Fi module that allows them to use wireless Internet throughout the home. And some people just want to get rid of wires throughout the apartment. In both cases, Wi-Fi routers came to the rescue, making it easy to distribute the Internet throughout the house. We'll talk about this further.

Of course, I decided a little late to get a Wi-Fi router. So again, an article from my own experience. I will write about that today how to connect and configure Wi-Fi router TP-Link TL-WR841N (this is the router I bought for myself). Also set a password for the Wi-Fi network so that the neighbors don’t steal the Internet :).

Before moving on to writing the instructions, I’ll draw your attention to a question that probably worries a lot of people who have thought about installing a Wi-Fi router. This is about the harmfulness of Wi-Fi, I wrote an article about it, you can read it. And one more thing, you ask (what is there to ask, if you are reading this article, you have probably already bought a router) why did I choose the TP-Link TL-WR841N router? According to my observations, this is the best option for this price; I paid 300 UAH for it. (1200 rubles). This is not an expensive router that can provide a full-fledged Wi-Fi network for the home.

I’ve already written a lot of unnecessary text, but I only promised instructions with pictures :)

1. You brought the router home or to the office, it doesn’t matter, we open the box and find there a lot of pieces of paper, a disk with instructions and a wizard for setting up the router. Also included, of course, is the router itself, if not, then you were deceived :), a network cable for connecting it to the computer and a power supply, that’s all.

2. We connect the router to the computer. Everything is very simple here. We place the router not far from the computer, it’s just that the cable included in the kit is not very long, if necessary, you can crimp more cables (you can even do this yourself, in more detail). This can be done in almost any computer store.

We connect power to the router and plug it into a power outlet. Then we connect the WAN Internet cable to the blue socket. The TP-Link TL-WR841N router has 4 LAN ports, which means you can connect 4 computers via a network cable. We connect the computer to the router using the cable that comes with the kit. Here are the pictures:

Let's quickly go through the buttons and connectors:

1. On/off button.
2. Power cable.
3. WAN connector for connecting to the Internet.
4. LAN connector for connecting the router to a computer via a network cable.
5. Enabling the feature.
6. Button to reset the router settings.

That's all, our router is connected. Let's now move on to the setup.

Setting up the TP-Link TL-WR841N router

Before you start setting up, I recommend doing .

To configure the router, open any browser and write 192.168.0.1 in the address bar, usually 192.168.1.1 goes through, but I was able to access the settings only through 192.168.0.1. Only after configuring the firmware update do I get access to the settings via 192.168.1.1.

A window will appear in which you need to enter your login and password to access the router settings. By default, the login is admin and the password is admin.

If the router does not accept the password and login by default, then see the article for possible solutions to this problem.

We get to the settings page.

Let's first update the firmware on our TP-Link TL-WR841N. To do this, you first need to download it from the website tp-linkru.com. We find it for our model and download the latest version. Unzip the firmware file to your computer and return to configuration.

Go to the “System Tools” menu and select “Firmware Upgrade”. Then click “Browse”, select the file we downloaded and click “Upgrade”. We are waiting for the router to update the firmware and reboot.

More detailed instructions for updating the firmware on the router -

Let's continue with the setup. Let's change the login and password to enter the router settings. Go to the “System Tools” tab, and then “Password”. fill in all fields and click “Save”.

Go to “Network” and “WAN”. Here you need to select the network type. If you don’t know what to install, call and ask your provider. You can also look at a detailed article on setting up a router to work with your provider -

Setting up a Wi-Fi network on TP-Link TL-WR841N

Go to the “Wireless” tab and configure the following parameters. In the “Wireless Network Name” field, enter the name of your Wi-Fi network. Below you can select the region where you live.

Don’t forget to click “Save” and go to the “Wireless Security” tab. This is the most important page, where we will configure the security settings of our Wi-Fi network.

For more information about setting a password for a wireless network, see

We set everything up as I have in the screenshot above. In the PSK Password field, create and enter a password that will be used to connect to your Wi-Fi network.

We save our settings with the “Save” button. The setup is complete, let's now reboot our router. To do this, go to the “System Tools” tab, and then “Reboot”. Click on the “Reboot” button and confirm the reboot.

That's all, we have just installed and configured a Wi-Fi router. As you can see, there is nothing complicated here and you can do without calling a specialist. If you have any questions, ask them in the comments. Good luck friends!

Also on the site:

How to connect and configure the TP-Link TL-WR841N Wi-Fi router? Instructions with pictures. updated: February 7, 2018 by: admin

Today in the media you can find a lot of information on setting up wireless routers. They all relate to managing the router. However, the proposed materials rarely explain how to access the router settings. The purpose of this article is to provide detailed instructions on how to enter the router settings.

There is nothing complicated about this; any user can perform this operation independently. You just need to follow the recommended steps. This way you can configure the router within a few minutes. In addition, from this article the reader will be able to learn about possible problems that may be encountered at work, and will also learn how to solve them.

Input data

To connect the router, you will need the router itself, a patch cord, a personal computer or laptop. An eight-core twisted pair cable is used as a patch cord, which is crimped on both sides with RJ-45 clips. It should come included. For example, let's set up a TP-Link router. The products of this brand are used by the majority of users in the domestic market. There really isn't much difference between manufacturers. All differences are only in the access point address, password and login. To find them out, just turn the device over and read the information written on the base of the router - IP-address, Password, Login. In most cases, the IP address is 192.168.1.1, and the password and login are admin.

Physical connection

First of all, you need to connect the router to a power source and make sure that it is in working condition. At least one light on the indicator panel should light up. One end of the patch cord must be connected to the computer's network card. The other end of the cable is connected to the router connector. Typically, a device's network inputs and outputs are marked differently, and it may even have a different color. To connect to the Internet, only one input is used, which has a WAN signature.

It is different from other ports, which are signed LAN. The connection to the computer must be made only through the LAN interface. You can use the LAN1 port to avoid confusion. When connecting devices, an LED lights up on the information panel of the router, which will inform the owner that the connection has occurred. Information will also appear on the computer screen indicating that it has been successfully added to the local network. At this stage, the user can configure the router in WEB interface mode.

Interface for configuration and management

Before entering the router setup menu, you need to decide on the WEB interface that will be used. For the WEB interface, the manufacturer recommends using the standard Internet Explorer browser. It does not always display the control panel correctly, for this reason it is better to use alternative programs such as Opera, Google Chrome, Mozilla Firefox. After opening the browser, you must enter the IP address in the address bar, which is indicated on the label on the base of the router (192.168.1.1 and 192.168.0.1), and then click “go”. In the window that appears, you need to enter the password and login, which should be written on the bottom of the router, and then press the “Login” or Enter button on the keyboard. Successful login provides the user with the router control panel.

Limitations in settings

Setting up the modem will not be possible if the network adapter does not work in automatic mode. This is evidenced by a light indicator in the tray, which is located in the lower right part of the screen next to the clock. It looks like an exclamation point in a red or yellow triangle. In this case, it is recommended to take a pen, a piece of paper and perform the following steps on the computer:

— move the mouse cursor to the warning sign and right-click on it;
— select “Control Center” in the menu that appears;
— in the window that appears, on the left side edge, select “Change adapter settings”;
— select the desired icon from one of the proposed options; more often it is labeled as Ethernet, which has a logo with a warning. You need to right-click on it;
— select “Properties”;
— find the TCP/IPv4 inscription in the dialog box;
- click again on the “Properties” item;
— copy all the settings onto a piece of paper;
— check the box next to the “Receive automatically” menu in both fields;
- after that, click the “Ok” button and close all opening tabs.

Fighting the network adapter

Setting up a router on a computer will not be possible if drivers are not installed on the computer. This is a completely possible scenario for the development of events after installing the operating system. In this case, the Update Center will not even have the required icon. After this, you need to go to the official website of the motherboard manufacturer and download the necessary software from there. It is also possible that the TCP/IPv4 inscription simply cannot be found. The user will not be able to find what he is looking for other than TCP/IPv6. To do this, there is an “Install” button in the same dialog box. Next, you need to select the “Protocol” item and in one of the proposed options, point to the desired TCP/IPv4 interface. If none of the network adapter configuration options help, you can try contacting specialists. They will certainly be able to solve your problem.

Setting up a router: provider restrictions

Many providers provide users with their own routers to use their networks. Company administrators very often set their own passwords to access the control panel. In such cases there are not many options. You can try to get access data from your provider, or you can perform a full reset to factory settings. The second option assumes that the router settings will depend on the user. The factory login and password must be known to the owner. Before resetting the settings, you need to make sure that you are completely in control of the situation. After all, quite often the provider uses non-standard settings for connection - PPTP, PPPoE, VPN, etc. The user must have all the information to connect.

Wireless connection

If the user, before entering the router settings, discovers that there is no patch cord in the delivery kit, or there is no corresponding connector on the kit, do not despair. Most devices support access point control via a Wi-Fi wireless channel. To do this, just establish a connection between the two devices. After this, you need to open the browser and repeat all operations related to entering the access point address. In cases where the router does not require authorization to access Wi-Fi, experts still recommend setting a password for using the wireless network. Otherwise, any attacker who is within the range of the router can not only reconfigure the access point for themselves, but also cause harm to all user devices.

Remote connection

It's one thing if you are setting up a TP-Link or D-Link DIR router. These inexpensive devices are limited to a WEB interface. There is no other way to access them. Owners of LinkSYS, ASUS, Zuxel, Cisco and other business-class routers can use a remote connection to the device or a COM-USB interface cable. Ease of management using the “console” snap-in is convenient because in a few seconds the router can be reconfigured to suit the owner’s needs.

For this purpose, scripts are created and sent to the router. Connection is quite simple. Using the Telnet and Putty programs, the user gains access to the IP address by entering a login and password for authorization. Then everything happens at the team level. They can be found in full not only in the instructions for the router, but also on the official website of the manufacturer in the “Administration: step-by-step router configuration” section.

Conclusion

Surely the reader will agree that getting into the settings menu for a wireless access point is quite easy. The main thing is that both devices - a personal computer and a router - do not have manual settings. When connecting, any problem will indicate that the operation of the network equipment has been corrected. Any user, having figured out how to enter the router settings, can easily connect to a wireless access point and organize full control of the device.

The owner of the router should know that no matter what settings he makes, it is impossible to harm the personal computer or router at the physical level. The most you can fear is reinstalling the operating system, as well as resetting the access point to factory settings. So you can safely perform any settings on the router.

Wireless networks – the ability to conveniently connect to the Internet without additional cable installation. A router (or router) is a compact substation, the main task of which is to transmit the signal received from the network to connected devices.

Unfortunately, even modern technologies fail. But even when your device is working properly, you may need to, for example, change the password or wireless network name. In all of the above cases, you will need to go to the router settings and perform certain actions. The control panel of the TP link router is located at 192.168.1.1 or 192.168.0.1.

TP link settings: using a personal computer

• Using a network cable, establish a connection to the computer router. To do this, connect one end of the cord to a personal device, and the other to the router. To connect to the router, use any of the LAN connectors (yellow outputs).
• Specify the address specifically for your router. To do this, turn the device over and on the back left side find the IP line and look at the next combination of numbers. In some device models, instead of the usual numbers, the domain address tplinklogin.net or tplinkwifi.net is written. Then remember this address.
• Open any browser on your PC and enter the IP address (or domain) data in the search bar.
• Press Enter.
• A window will appear in which you must enter your username and password. Again, look at this information on your router. It is listed below the IP address (or domain). Standard data “admin” and “admin”. If you have previously changed the login information for the router settings, then enter the already changed information.
• Press Enter (or “Login”) again.
• The required settings will appear in front of you.

TP link settings: use wireless Wi-Fi network

This method will help if you need to get into the control panel of the router, but there is neither a power cord nor a computer. Important note: When working with device settings via Wi-Fi, do not update the software, otherwise you risk breaking the device. The router firmware is carried out only using a cable connection.

• On the back of the router you will find the connection information IP address, login and password.
• Next, launch the browser on any gadget (phone, tablet, laptop) connected to the router via a Wi-Fi connection.
• Enter IP addresses (or domain address) into the search bar.
• You are making the transition.
• In the window that appears, fill in the “Login” and “Password” fields. To do this, enter the appropriate data for your router (standard “admin” and “admin”).
• Click “Login”.
• If everything was done correctly, a page of the required settings will open in front of you.

TP link settings: possible problems

In some cases, performing the steps listed above does not bring the desired result. What are the possible causes of failures?

It is not possible to open the page

After specifying the IP address and attempting to navigate, a message appears on the screen that the browser cannot display the page. In this case it is necessary:

• Check the Internet connection. The status bar on your computer (or mobile device) should show an Internet connection icon.
• Check the network settings on the PC or other gadget with which you are trying to access the router settings.
• When establishing a wired connection, check the integrity of the cable. If possible, try connecting via Wi-Fi.
• If both Wi-Fi and a network cable connection are active on your computer, disable one of the communication methods.
• You shouldn’t rule out a possible breakdown of the router itself.
• If the above steps do not give the desired result, try resetting the router to factory settings (press and hold the Reset button on the back of the router for about 10 seconds).

Incorrect login and password

An error may also occur at the stage of entering your login and password (or entering this information does not lead to any further events). In this case:

• Try different login options. If you changed the data, enter the new information, not the standard data. Leave both fields blank and try to login. Leave the “Password” line blank or try entering the combination 1234 in it.
• Change your browser.
• If the steps are unsuccessful, you will most likely have to perform a factory reset (as described above).

Hello! In almost every article in which I write about setting up routers, or about solving some problems with wireless networks, I write about how to enter the router’s control panel to change some parameters, etc. And frankly, I'm already tired of constantly writing the same thing :). So I decided to write about this in a separate article. Yes, and there is nothing to write about here, but still, many people have problems with this.

On almost all routers, even from different companies, entering the settings is almost no different. But I will show using the example of TP-Link devices.

Let's first figure out how the router should be connected. Everyone (including me) recommends connecting it to a laptop at the time of setup. But, if you just want to make some settings, you can connect via a wireless network or even from a phone or tablet, nothing bad will happen.

Not when connected via Wi-Fi! Only via network cable!

This is understandable. You must be connected to your network. By cable or Wi-Fi.

Go to the control panel

Open any browser. Internet Explorer is also possible, but Chrome, Opera, etc. are better.

Now attention! Take your router and look for a sticker on it that contains various information (model, version, etc.).

We need to look there IP address (usually 192.168.0.1, or 192.168.1.1) And password login to access settings. If you haven’t changed them, then these are most likely admin and admin.

As you can see, I have IP: 192.168.1.1. So we type this address in the browser, in the address bar, and go to it.

A window should appear asking for a password and login.

Enter the username and password that are written on the router. Not to be confused with the password for the Wi-Fi network!

If you have already changed this data during the setup process, then most likely you will have to change the password and login to the default ones again.

After pressing the button Send we get into the settings. Depending on model (firmware versions) and manufacturer, they may differ.

If you have any problems, be sure to read this article -

Each instruction supplied with a TP-Link router contains an algorithm for setting up network equipment, but not a word about solving connection problems. But without access to the software part of the router, the user will not be able to configure the device.

In this article, the reader will learn about TP-Link and its settings. A complete algorithm of actions will be proposed with step-by-step solutions to emerging problems. Naturally, to achieve results, the user will have to use all the recommendations.

First start

If we are talking about a completely new device, just purchased in a store and has never been turned on, then the effectiveness of the connection directly depends on the computer settings. In fact, by connecting the wires correctly, as described in the instructions, the user can easily connect the two devices.

Then it’s a matter of technology: how to access the TP-Link router interface is indicated in the same manual. You need to enter the IP address of the network device in the address bar of your browser and specify your login and password when logging in (they are identical - admin). This procedure is simple and does not require the owner of the router to have any knowledge in information technology.

Configured network equipment

There are situations when a user purchases a used router. Here the situation can be resolved in several ways. Knowing how to log into a TP-Link router (if the seller changed the factory settings and transferred authorization information to the buyer), you can easily reprogram the network equipment for yourself.

But there are situations when the user does not have information about the router’s IP address, as well as login and password. The problem can be solved simply - you need the equipment to factory settings. This is done with a special Reset button, which can be found on the control panel. Then the connection is made according to the instructions that come with the router. It also describes in detail how to log into a TP-Link router.

Provider tricks

TP-Link products are quite popular among providers who provide network equipment to their customers completely free of charge (of course, the user must connect on a contract basis). Here the situation for the owner is aggravated by the fact that programmers of organizations providing Internet access services very often install their own firmware with their own authorization system. The password, of course, is not shared with anyone.

Before thinking about how to access a TP-Link modem, the user needs to make sure that his desires are appropriate. In most cases, the router is already configured and provides access to the Internet via both wired and wireless channels. But there are situations when you need to change your Wi-Fi password or the problem can be solved in several ways. You can ask the provider to change the settings or install the manufacturer's factory firmware.

Pitfalls in the software update process

It would seem that what could be easier than downloading proprietary firmware from the manufacturer’s official website and installing it on the router? But there is a problem. The fact is that the user will not be able to access the “Administration” tab in the device control panel. You can hack anything - both software and hardware. The question here is different: is it really necessary to do this?

How to log into TP-Link without knowing either your login or password? In addition, the network device itself has non-standard firmware. Just. Find out the IP address of the router and use a special utility to force new firmware into the device. True, another question arises here: will the provider give its client network settings after learning that he is using a non-branded device.

On the other side of the wire

Thinking about how to log into a TP-Link router, the user forgets that in addition to problems with the network device, inoperability can also be caused by the computer’s failure to “see” the router. The network card of any PC can be in three states: disabled, operating in static mode, or receiving an IP address via DHCP. In the latter case, there should be no problems connecting network equipment. But the first two conditions will have to be dealt with.

Can be disabled in hardware and software. If the device is not detected by the operating system, you need to go to the BIOS settings and enable it (or install the driver). And the adapter is turned on in software via When looking for answers to the question of how to log into a TP-Link router, the user should not forget about the network settings.

User intervention

By going to the “Network and Sharing Center”, the owner should find the “Change adapter settings” item. Next, the desired network connection is selected, and after calling the alternative menu of the selected icon, the user needs to go to the adapter properties. Everything is simple here. In the list of active components you need to find the “IP version 4” menu and go to its properties.

In the menu that opens, the user needs to cancel manual network settings by checking the box next to the inscription: “Receive automatically.” This needs to be done for both the IP address and DNS. In general, before logging into the TP-Link WR841N or any other network equipment, it is better to immediately make sure that the computer is configured to automatically obtain the server address and domain name (DNS).

Finally

As you can see from the review, there is nothing complicated about the computer. Yes, you need to spend more time on unnecessary procedures such as resetting, flashing network equipment or changing the settings of a personal computer. But these are ready-made solutions that will really help any user solve connection problems.

When wondering how to access a TP-Link router, any owner should understand that in most cases (99% probability guaranteed) the solution to the problem directly depends only on him. And of course, from knowledge that will always help solve any given problem.