Menu
homeAndroid

How to update the software of a digital television set-top box. Updating software for set-top boxes

When you turn on the set-top box for the first time, a software update is performed. The software update process takes a few minutes. Do not disconnect your device from the network until the updates are fully installed.

In the future, software updates occur automatically after rebooting the STB. To reboot, you must press the “RESET” button on the front panel of the STB or disconnect its power supply from the network. If a new version of the software has been released, the automatic software update process will begin.

The software update process is displayed on the TV screen and on the front panel of the set-top box:

ADB3800W Software Update
The process takes 5-7 minutes, during which time progress is displayed on the front panel of the set-top box and on the TV screen (in % from 0 to 100). Do not disconnect the set-top box from the network until the updates are fully installed and the subscriber portal image appears.

AmiNET130 software update
The process takes 6-8 minutes, and during the first minute the indicator on the front panel of the set-top box will blink at a variable frequency. The TV screen periodically displays the Amino splash screen and a black screen. Do not disconnect the set-top box from the network until the updates are fully installed and the subscriber portal image appears.

Sagem IAD84HD/IAD85HD software update
When you turn on the set-top box for the first time, a message will appear on the TV screen indicating the need to update the software. To start the software update process, you need to press the red button on the remote control with the inscription “A”. The process takes 5-6 minutes, and an indicator will be visible on the TV screen indicating the status of the update process. Do not disconnect the set-top box from the network until the software update is completely completed and the subscriber portal image appears.

Software UpdateDune HD TV-102

The basic software for this media player is installed by the company. It allows you to use 7Sky TV services and standard player functions. An attempt to independently install new software from the Dune HD website will lead to the inability to use 7Sky TV services.

After the release of a new version of the software for 7Sky TV, when you turn on the set-top box, a message will appear on the TV screen indicating the need to update the software. To start the software update process, you need to press the red button labeled “A” on the remote control. A message will appear with the current software version and the new one; To start the process, you must press the “ENTER” button. The process takes 5-6 minutes, and the process of downloading and applying the update will be shown on the TV screen. Do not disconnect the set-top box from the network until the software update is completely completed and the subscriber portal image appears.

Today, digital technologies have penetrated so deeply into the everyday sphere that life without them has become simply unthinkable. The new broadcast format - digital television, provides improved image and sound quality and greater noise immunity. Modern set-top boxes allow you not only to passively view HDTV channels, but also to control this process. The user has the opportunity to “rewind” the broadcast, pause it, not to mention the banal recording of favorite programs. But the real capabilities of TV set-top boxes do not end there; only to gain access to the full functionality of the device will you need to update its software. Reflashing a technical device means updating the software on it. The procedure is comparable to reinstalling Windows on a personal computer. Manipulations are carried out in order to expand functionality and improve technical characteristics.

Reflashing the Rostelecom set-top box: losses and gains

Let's try to figure out what the firmware of the Rostelecom set-top box provides and what risks exist when carrying out this procedure. The most popular model of the operator’s set-top boxes is IPTV RT-STB-HD Standart. Technically, it is a complete copy of the MAG-250, developed by the Ukrainian manufacturer Infomir with the functionality reduced by Rostelecom firmware. And in order to return the set-top box to its original capabilities, you need to reflash it to the original MAG-250.

The latest IPTV RT-STB-HD Standart models are produced by Rostelecom with its own remote control, which is unsuitable for controlling the MAG-250 due to the absence of some functional buttons on it.

In this case, you will have to use not only the standard firmware from Infomir, but also a modified one. There is a nuance - from experience it is easier to first install standard firmware, and only then, if necessary, upload a modified one to it.

First about losses: when updating the iptv firmware of the Rostelecom set-top box, the operator’s interactive services will become unavailable, since access to them is provided by the original software. This is where the disadvantages probably end.

From acquisitions: home media center with support for WI-FI and DLNA, as well as the ability to watch TV channels from a playlist without operator tariff restrictions.

Digital Living Network Alliance (DLNA) is a standard that allows you to combine various multimedia devices into a single user network.

Firmware for Rostelecom TV set-top box: preparatory procedures

If you have read to this section, the question is: “Is it possible to reflash the Rostelecom set-top box?” not standing in front of you. The procedure is quite simple and usually ends in success. All that remains is to figure out what is needed for this.

So, to flash the Rostelecom TV set-top box, you will need:

  • Hardware: PC with cable for connecting the set-top box;
  • software: mcast.exe, any dhcp server (one of the most convenient and popular is dualserver), the current version of the official firmware, if necessary, a modified version.

All downloaded software must be placed in one folder created in the root of drive C. For the convenience of further explanation, we will call the folder infomir.

This completes the preliminary stage of flashing the Rostelecom iptv set-top box. Now let's get to the fun part.

How to flash a Rostelecom set-top box: step-by-step instructions

If you have completed all the preparations and feel the strength to start, let's get started. Let's look at step by step how to reflash the Rostelecom set-top box.

First, you need to reset the set-top box to the initial, default factory settings. Firmware for the Rostelecom TV set-top box can be completed successfully without this procedure, but it’s better not to risk it.

Keep in mind that the Default button on the rear panel of the set-top box, seemingly intended for this purpose, does not work. Therefore, you need to reset the settings through the menu - item Def. Settings. After the message “Set default settings!!!” appears Press OK" press OK and exit the menu saving the changes - select "Exit & Save".

Next, the flashing process is performed on the computer. In the main menu, select Run and in the Open line and type ncpa.cpl, and then click OK. In the list of network connections, select the required one, call the context menu for it and go to Properties. At the bottom of the tab there is a list of components used by this connection. Open “Internet Protocol Version 4 (TCP/IPv4)” and double-click on the protocol properties. Enter the IP address - 192.168.1.1 and subnet mask - 255.255.255.0.

Then the DHCP Server service starts. Win+R → cmd→ C:\infomir\dualserver –v (full path to the program).

Having launched mcast.exe, click on “Local Area Connection” (IP 192.168.1.1) and click Select on the right side of the window. In the program window you need to enter the values ​​of the IP addresses of the processes: 224.50.0.70:9000 for thread No. 1, 224.50.0.51:9001 - for thread No. 2. Click the start button for both streams. The set-top box is connected to the PC and in its main menu, select the command Upgrade Tools → MC Upgrade. As a result of these actions, the firmware will be downloaded and saved in the console’s memory. We reboot the device and - voila - the new media center is ready to work.

Rostelecom has severely reduced the capabilities of the Mag-250 to an insulting degree. And using it without flashing it is like driving a Ferrari on Russian off-road, strictly observing the speed limit. Of course you can, but is it worth it?

About firmware for DVB-T2 digital set-top boxes:

Updating the software (firmware) of your equipment is carried out only in cases where any problems arise, or the update will add useful functions to the device. Flashing devices unnecessarily is not recommended, because... During the firmware update process, there is a possibility of equipment failure. If you are not sure that you can handle updating the firmware on your own, we recommend contacting the appropriate service center and qualified specialists at the PLUS-MINUS Company.

How to update firmware:

Proceed as described in the user manual. If this information is not in the manual, then contact the technical support service of the PLUS-MINUS Company.

Download ORIEL firmware file:

Receiver firmware file Oriel 710 - download(version 1.3.5). This update is only suitable for receivers with serial numbers from 710121000001 to 710130211200.
. Receiver firmware file Oriel 720 - download(version 1.3.5). This update is only suitable for receivers with serial numbers from 720121000001 to 720130202200.

810 - download(version 3.4)This update is only suitable for receivers with serial numbers from 81111200001 to 81111205050 and from 81120100001 to 81120106060. Firmware instructions.
. Oriel receiver firmware file 820 - download(version 1.0 dated 08/01/2012). This update is only suitable for receivers with serial numbers from 82120100001 to 82120105280. Firmware instructions.

Oriel receiver firmware file 910 - download.
. Oriel receiver firmware file 920 - download.

Download SELENGA T2-1000 firmware file:

05/07/2013. After switching from DVB-T to DVB-T2 format, channels are not scanned in this firmware:

MODEL: DZHDT

SW VERSION: 9610.9615.1121105R

HW: 1612301202112FD65

-----> the software should be replaced with the following:

MODEL: T2600

SW VERSION: software130108_v10.0

HW: 161230120650

(usb_upgrade_all_selenga_T2-1000_v10_T2600_130108.bin) - download

-----> or The software should be replaced with the following:

MODEL: T2600

SW VERSION: SOFTWARE:MNP AHTEHH_v11.0

HW: 161230120650

SELENGA T2-100 receiver firmware file

(usb_upgrade_all_selenga_T2-1000_v11_T2600_15062013.bin) - download

SELENGA T2-100 receiver firmware file

(usb_upgrade_all_selenga_T2-1000_v13_T2600_28062013.bin) - download

Download SELENGA T2 HD850 firmware file:

SELENGA HD850 receiver firmware file

Download SELENGA T2 HD900, HD1000 firmware file:

SELENGA HD900/HD1000 receiver firmware file

(usb_upgrade_all_selenga_T2-HD900_HD1000_07062013.bin) - download

Download DIMBOX firmware file:

Receiver firmware file DIMBOX(usb_upgrade_all_dimbox040313.bin) - download

Download GS TE8714 firmware file:

Receiver firmware file GS TE8714

(2012_11_07_TE8714x_for_0.0.660v.rar) - download

(2012_11_07_TE8714x_for_4.14.4xx.00.01v.rar) - download

(2012_11_07_TE8714x_for_4.15.125.00.01v.rar) - download

(Instructions for updating the GS TE8714 receiver) - download

ATTENTION! The download archive must be selected depending on the current software version of your receiver. The current version can be viewed in the “Status” item in the main menu of the receiver.

Advantages of the new software version relative to the previous 0.0.660:

  • Improved S/PDIF audio output performance
  • Improved receiver stability in PVR and Timeshift modes
  • The procedure for updating the receiver software has been greatly simplified
  • Improved receiver user interface

Attention! After flashing a new software version, returning to the previous one is impossible!

Download WORLD VISION firmware file:

Receiver firmware file World Vision T23CI

(T23CI_V1.0.8_20130315.abs) - download

(T23CI_V1.0.9_20130805.abs) - download

(t23ci_v1.1.1_20131017.abs) - download

Instructions for updating World Vision T23CI (WorldVision_T23CI_manual.pdf) - download

Receiver firmware file World Vision T40(usb_wv-20130807-upgrade_all_flash.bin) - download

Download firmware file 4HOME DVB-T2 1811:

Receiver firmware file 4HOME DVB-T2 1811 (updated_software_4homedvb-t21811.zip) -download

Download DCOLOR DC710HD T2 firmware file:

Receiver firmware file DCOLOR DC710HD T2 (DCOLOR_DC710HD_DVB_T2_RUSSIAN_upgrade.zip) -download

Download GLOBO T2 firmware file:

Receiver firmware file GLOBO GL60 T2 (Software_DVB-T2_RU_FTA_1.0.0_GL60_2013-03-28.rar) -download

Receiver firmware fileGLOBO GL60 T2(Software_DVB-T2_RU_FTA_1.2.1_GL60_REV_300_2013-12-19_DOUBLE_LCN_SORT_FIX.rar) - download

Receiver firmware file GLOBO GL100 T2 (Software_DVB-T2_RU_FTA_1.1.5_GL100_2013-09-25.rar) -download

Receiver firmware fileGLOBO GL100 T2(Software_DVB-T2_RU_FTA_1.2.1_GL100_REV_300_2013-12-19_DOUBLE_LCN_SORT_FIX.rar) -