iPad won't turn on: how to fix it? Possible problems, recommendations. Why iPhone and iPad won't charge: causes and troubleshooting

Having won the trust of users with their reliability, they were no exception. But if it doesn’t turn on for you, don’t panic. The reason for this is not necessarily a breakdown; it can be trivial and easily fixed.

If your iPad won't turn on, you need to connect it to a power source. The problem may be caused by a completely dead battery. Usually the tablet's charge is enough to show the empty battery, but it happens that we see nothing but a black screen. It is recommended to charge the gadget for at least 20 minutes. Then you should try to turn it on. If the screen shows red, then the iPad is low on battery, so you need to. If there is no change, try changing the power source (plug it into a different outlet, change the charger).

Firmware problem

The battery is charged, but the iPad does not turn on, what should I do? This sometimes happens after updating the firmware or installing unlicensed programs. The solution in this case is to reinstall the operating system. Try holding down the Home and Power buttons at the same time for about 10 seconds. Turn on the iPad with the Power button. If an apple appears on the display, it means the problem has been resolved and the tablet will turn on soon.

Malfunction of tablet elements

Another reason why the iPad may be a malfunction of the gadget.

The power button is faulty

Sometimes it happens that the Power button fails and stops working. Diagnosing this problem yourself is not difficult - you just need to connect the iPad to a charger. When the battery charge indicator appears on the display, you can be sure that the power button is not working.

Broken charging connector

Detecting a connector malfunction is a little more difficult, because when you connect a completely discharged tablet to a charger, nothing will happen. There is, however, a possibility that there is no contact due to contamination of the connector. This means that cleaning it can be the solution to the problem.

Moisture ingress

Moisture getting inside the tablet can also cause the iPad not to turn on. You can try to cope with this problem yourself. To do this, you need to disassemble the device and let it dry for several days. But this is quite risky, since moisture can cause the board to oxidize. Repairs will be expensive, and perhaps the iPad will not be repairable at all. Therefore, it is much more prudent to take the gadget to a service center to clean the board as soon as possible.

Short circuit

Another common reason why the iPad turns off and won't turn on is short circuits. Their very possibility on a tablet seems incredible. When used correctly, this is true. Mostly, a short circuit occurs due to the use of a non-original charger. In this case, the electrical impulse can damage some elements of the device. The only solution in this case is to replace the damaged elements.

Owners of Apple tablets are so confident in the quality of their devices that they don’t even think about their breakdowns. Sudden crashes often throw users into a stupor.

If your iPad Air won't turn on or the Internet won't work, don't panic. This does not mean that the gadget is broken. Perhaps the tablet simply froze due to software glitches, which happen quite often.

In this review, we will look at all the reasons for such situations and find out what to do if the iPad does not turn on.

If your iPad won't turn on, the problem may be due to a low battery level. This is the first thing to check. In this state, it is not possible to use all the functions of the device; it is not even possible to access the Internet.

A deep discharge often results in the iPad not turning on at all or turning off a few seconds after starting. Therefore, the first thing a user should do when such a problem occurs is to charge the device, and for a long period. In 4-6 hours the tablet is well supported by energy and, most likely, a new attempt to turn it on will be successful.

Let's say you recharged your tablet, but it doesn't work again, and you can't access the Internet. In such a situation, check the functionality of the charging element itself. It may not supply the required amount of current, thereby preventing the battery from recharging normally. Even if you put the tablet on charge for a long period, in case of such a breakdown it will not help. To check the functionality of an element, test it on another iPad or iPhone. You can also connect another charger to the tablet or try the process via the USB port.

If you are convinced that just a couple of hours ago the battery was full, still set the device to recharge. It is possible that during this short period the gadget was discharged to 0%, so it cannot be turned on. Here, solving the problem is as easy as shelling pears - your iPad is asking for charging, there are no serious damage to the “filling”.

Perform Reset

Regular PCs, and then laptops, appeared much earlier than tablets. Experienced users who spend many hours on computers every day know very well that if the equipment freezes, you need to click “Reset”. In the case of laptops, this element is missing, and you need to press and hold the battery. After a certain period of time, the equipment will turn off and it can be restarted.

But what to do if such a nuisance happened to your tablet? It should be sent for a reboot in forced mode. You also need to take care that all information inside the memory is preserved intact. Because there is no “Reset” element on the iPad, like on a laptop. will act differently. Namely, we press the power and “Home” buttons. You need to remain in this state for 8-12 seconds and wait until the tablet displays the bitten fruit on the display. This will mean that the device has started to reboot. Once the operation is completed, the Pad will start working normally.

Please note that this method does not erase user information. However, regularly creating a backup still won’t hurt. You can make a copy via the Internet using the cloud or iTunes.

Restoring iPad

Are you the owner of an iPad 2, mini or any other version of the popular tablet from Apple? And your device, which has been working like a clock for many months, has had trouble? Does it not turn on and does not react in any way to all your actions? This may be due to a serious software problem. It is this that interferes with the normal functioning of the system. Often even Reset is not a help here. How to be? You should try to restore the tablet. And if the operation is successful, he will return to his original state.

To restore the operating system, follow this algorithm:

Turn off the iPad (the gadget's display should turn black).
Connect your device to your PC/laptop and launch the iTunes utility.
Press and hold the battery and Home on the tablet and wait 8-12 seconds.
Continue holding the same button for another 10 seconds.

After the operation is completed, using the same tune, a notification will be issued that a device connected in recovery mode has been detected. And then the program will begin the operation of resuscitating the operating system by downloading the firmware. After the operation is completed, the tablet will reboot and turn on. Of course, if there are no other breakdowns on board.

The described method is radical, since it erases all information from the gadget’s memory. Therefore, before using it, turn off the device, create a current backup version.

Now you know how to turn on the device if the system does not boot and something is broken inside the device. After the recovery operation, the operating system will boot safely. Of course, if the breakdown was serious, this procedure alone will not do.

Liquid entering the device

There are situations when the second iPad model (or any other) does not turn on, but the screen shows an apple, and then goes dark. Sometimes the apple blinks, other times the user observes something blinking. What to do in such a situation? Often the cause of the problem is liquid droplets getting inside the device. And if you know for sure that this happened to your equipment, immediately go to a repair shop. Here the gadget will definitely be disassembled, cleaned and dried, and then the functionality will be checked.

Just don't follow the DIY cleaning instructions. This will only cause irreparable damage to your tablet. This type of work can only be entrusted to specialists. They will also help you solve other problems - fixing breakdowns and restoring normal iPad functions.

This behavior of the tablet, when an apple appears on the screen and then goes out, can also be observed with other types of malfunctions. For example, when the battery life expires.

If your iPad won't turn on or charge

Yes, sometimes such a nuisance happens, although not very often. However, it is quite easy to identify the reason for this. The difficulty may be caused by:

There is a general malfunction of the device, then a trip to the repair shop cannot be avoided.
Batteries fail – and this is again a reason to visit the service, because these elements are replaced only here.
Damage to the charger or cord. Check these accessories and purchase new ones if necessary.

Thus, you can independently perform only the last named step - check the serviceability of some elements. In all other situations, you will have to turn to professionals, and not think about what to do on your own.

Home repair or service: which is better?

What to do if the iPad 3 does not turn on (we may be talking about another model - iPad 4, 1.2, iPad mini, Air). On forums on various resources you will find dozens of tips for resolving this problem. However, almost all of them are of no practical use, and sometimes even harmful.

Disassembling the case of an iPad is a difficult, labor-intensive process that requires special knowledge and skills. Especially when it comes to repair work on electronic microcircuits, experience is required.

Otherwise, the user will simply destroy his device or the cost of repair will be too high. Therefore, it is better to leave the equipment in the reliable hands of specialists. And it is better for the owner of a tablet to limit himself to checking the functionality of the named nodes.

This article discussed common reasons why an Air or any other tablet does not turn on. We found out that if the device does not turn on, it is better not to risk it and take the device for repair. Don’t rush to purchase new equipment; in most cases, the tablet can be repaired. Perhaps you just put your gadget into energy-saving mode and forgot about it? Therefore, the display is in the off state, and you are under the misconception that it is in off mode.

Fashionable “Apple” technology has long gained trust in the market and has become a kind of symbol of reliability. However, unfortunately, even expensive, meticulously designed gadgets produced by Apple are prone to breakdowns. Why doesn't the iPad turn on and how to deal with various types of faults?

Firmware problems

This is one of the most common reasons why the iPad does not turn on at all or turns on, but the screen does not show any signs of life. The only way to deal with this situation is to reinstall the operating system, that is, roll it back. Often, in order to correct the situation, it is enough to simply hold down the Power and Home buttons for a few seconds. If everything went well, the treasured apple will appear on the display, and soon the iPad will turn on.

Problems with the power button

It also happens that for some reason the button responsible for turning on the device fails. It is very simple to make sure that this is the cause of the malfunction. To do this, just connect your iPad to the charger. If the charging indicator appears on the screen, then the problem lies with the power button.

Moisture ingress

A fairly common reason why the iPad does not turn on is moisture getting inside the device. Sometimes you can correct the situation by disassembling the gadget and drying all its parts for several days. However, it would be much more logical and safer to take it to a service center to clean the board. If this is not done in a timely manner, the board may oxidize under the influence of moisture, and subsequent repairs will be much more expensive (perhaps the device will not be repairable at all).

Charging connector failure

This problem is a little more difficult to define. If problems arise specifically with the connector for the charger, nothing will happen when you connect a completely discharged iPad to it. True, there is a possibility that the connector is simply dirty, and this is what interferes with normal charging. However, you should entrust its cleaning to a specialist.

Short circuits

Surprisingly, this is often the reason why the iPad does not turn on. It would seem, how can they even happen? If you follow all the rules for using the gadget, there really is no way. However, say, when using a non-original charging device, an electrical impulse can hit several components at once. In this case, the only solution is to replace all damaged elements at a service center.

What to do if the iPad does not turn on and the apple is on fire?

The following situation is quite common. and nothing else happens on the screen. The reasons for this may vary. The first and simplest are problems with the software, which can be solved by flashing the gadget using iTunes. But there is also always the possibility that the reason for this behavior of the iPad is a malfunction of the internal elements of the device - in this case, you again cannot do without the intervention of specialists.

Why doesn't iPad Mini work?

The reasons why the iPad Mini does not turn on completely coincide with those that are typical for its “bigger brother” - the standard iPad. Therefore, the measures that need to be taken remain the same: try to charge the device or restore the system using iTunes, or contact an Apple service center.

The iPad may have various problems with the operating system, virus activity and all other ailments, but none of this matters if iPad won't charge. In this case, after a short period of time, the tablet will turn off and stop turning on. In general, the situation is quite standard for tablets from other manufacturers and smartphones.

Probably, the iPad does not turn on and does not charge due to the fact that there are certain breakdowns at some stage of charge transfer. An even more common situation is when, when connecting the device to the PC, a message appears that charging is not taking place. The reason is not a breakdown at all, it’s just that the device has increased requirements for the USB port, and often older computers do not provide a sufficient level of transferred charge, that is, there is not enough power. In reality, the charge still arrives, just extremely slowly and the result can only be noticed after a long period of time.

It is best to use the original adapter, which is included with the device. Thanks to it, the fastest charging and high-quality contact with the tablet are achieved;
The device used for charging does not always have sufficient power to perform a high-quality procedure;
When connecting to an old PC, a characteristic message appears about the lack of power, although it is supplied, it is very slow;
Do not attempt to repair the smartphone port yourself; ensure that there is no mechanical damage.

When charging still does not occur, you should resort to determining the technical serviceability of the electrical circuit elements.

Causes of failure and solutions

When the iPad mini does not charge, you should proceed to determine whether the devices are working properly. It is best to determine the cause of the breakdown or failure by following the instructions step by step:

First of all, the charger is visually inspected. Determine whether there are any interruptions in the cable, strong bends, noticeable deformations, or damage. It is best to determine whether this is the reason by using another charger that is known to work;

It is also likely that the port has suffered mechanical damage to the contacts. This occurs due to improper, careless handling of the device. Sometimes such a defect becomes a consequence of other, unintentional damage. The problem can be fixed only in a certified Apple center;
It is likely that the lower cable has failed. The standard reason is liquid entering the device and shorting the contacts. To restore operation of the device, you must contact a service center to replace the cable;
The port in the tablet is dirty, you can very carefully clean it using a thin metal pin, the one used to open the SIM card slot or a toothpick will do;

It is possible that charging does not occur because the power controller is faulty. A common cause of the problem is the use of third-party chargers, which may not yet be certified;

Obviously, if the socket fails, charging will not occur, check from another socket;
If the board fails, then the iPad not only stops charging, but also stops turning on in general. In some cases, it is enough to clean the board and everything will work, but in others, repairs are required. In any case, the diagnostic and repair procedure is carried out by specialists at the service center.

Correct connection to power supply

You should immediately take an adapter for charging; the ideal option is the USB cable included in the kit. When using a charger from another manufacturer, you must make sure that it is certified by Apple. Followed by:

Connect the Lightning-USB cable to your iPad (or other Apple device). Connection is possible using a cable with a 30-pin connector;
Next, connect to the power source, it is recommended to select one of the options:

A regular socket, you must first connect a special device to the adapter for charging through the socket, and then connect it to it;

You can charge your iPad using a USB connection to a desktop PC or laptop; it must be in an active state. You can use USB 2.0, 3.0 or 3.1. If there are ports on the keyboard, it is better not to use them, as the circuit loses reliability, creates an extra load on the keyboard and a lower charging speed;
It is possible to use special docking stations, portable charging accessories or a Power Bank. They must be certified by Apple.

Forced restart

In some cases, iOS may freeze in such a way that it refuses to accept any external influences. To restore functionality, there is a special, forced restart of the iPad. After completing the procedure, the tablet will return to life and will be able to accept a charge if there is no mechanical damage to the components of the electrical circuit.

You can restart if you hold down the wake-up button and at the same time press the volume rocker down. In older models, it is possible to use the lock and “Home” buttons. Must be held for 10 seconds. before the Apple logo appeared.

In some cases, you will have to update your device or roll it back. The most convenient way to restore an iPad is using iTunes on a PC, but to get a high-quality result, it is necessary that the devices first synchronize and remember each other. You may immediately see a notification asking you to restore the tablet, or you will have to go to its menu and select the appropriate item.

Almost always, if the cause is not serious internal problems, the user manages to restore the device’s charge to normal or determine the culprit of the failure.

If you still have questions on the topic “Why is the iPad not charging and what should I do?”, you can ask them in the comments

if(function_exists("the_ratings")) ( the_ratings(); ) ?>

Even the best quality equipment is not immune to malfunctions. And Apple devices, which have won the love of users with their functionality and impeccable reliability, are no exception.

If your iPad won't turn on, don't worry too much. The reason for this is not necessarily a hardware malfunction; most likely, the problem can be solved easily and trivially.

The reasons for this behavior of the tablet should be determined. This may happen due to a battery failure or a faulty power button.

Causes and solutions

This behavior is usually typical for the iPad after the battery has been discharged.

Factors associated with battery damage can be divided into three groups:

contact deformation (can occur if the tablet falls into water);
minimum charge;
internal problems.

Battery low

First of all, if it is impossible to turn on the iPad, it should be connected to a charger. A completely discharged battery is often the reason for this behavior of the iPad. Usually the battery charge is only enough to display an empty battery, but it often happens that nothing is visible except a dark screen.

The minimum recommended time to charge a tablet from Apple is 20 minutes. After this, you need to try to turn it off. If a red battery appears on the display, the tablet is low and you need to continue charging.

Reboot

The most effective action in the fight against spontaneous shutdown of the tablet is considered to be a hard reboot. To do this, press two keys on the iPad “Home” and “Power” at the same time and do not release them until an apple (Apple logo) or a graphic image of the battery status appears on the screen.

The appearance of an apple on the display indicates that the problem has been solved, the tablet is charging and will be available for normal operation.

It should be noted that a hard reboot resets temporary data.

Restoring the iOS operating system using iTunes

If after a hard reboot the tablet still does not turn on, you can try to restore the iPad's functionality by completely flashing the device.

In order to restore the operating system via iTunes you will need:

the latest version of iTunes (preferably);
a pre-downloaded file with the version of iOS currently installed on the iPad.

Restoring iOS is carried out according to the following sequence of actions:

iTunes will automatically delete all content and download the latest firmware to the iPad's internal memory. After the update, the device will be placed in Recovery Mode and the device will be restored to its factory state.

Other reasons

Often, even with a loaded battery, the iPad still does not turn on.

There may be several reasons for this behavior of the device:

installation of unlicensed applications and installation of new firmware. A possible solution to the problem is to reinstall the operating system using iTunes. But before reinstalling the operating system, you should try to hard reboot the device;
Problems with iPad components. Most often the power button breaks. To diagnose this problem, you need to connect the device to a charger. If the battery charge indicator is displayed on the screen, then the power button is almost certainly faulty;
The charging connector is faulty. This type of failure is much more difficult to identify, since when you connect an iPad without a charge to the charger, nothing happens. A possible way to eliminate this kind of malfunction is to clean the connector contacts;
moisture getting inside the tablet. You can try to cope with this problem yourself. You need to disassemble the tablet and let the device dry for 2-3 days. This method is not always effective and is risky, since there is a possibility of board oxidation. Repairing the board is usually quite expensive, and in some cases the device becomes completely unrepairable. In this regard, it is recommended to return the tablet to a service center to resolve the problem as soon as possible;
short circuits. Despite the fact that the reason is incredible if used correctly, this can happen when using a non-original charger. The only way out of the problem situation is to replace the burnt elements.

Video: What to do, iPhone won’t turn on

iPad stuck on apple and won't turn on

The situation when an Apple tablet does not turn on and an apple is lit on the display is quite common. The likely source of the problem lies in a software glitch. To solve this, you need to install new tablet firmware using iTunes.

In addition to a software problem, the reason for this behavior may be hardware. If the internal components of the tablet malfunction, you cannot do without the help of third-party specialists.

In general, when an apple appears on the screen, you should not worry too much; most likely, nothing critical has happened to the tablet, and the problem can be solved on its own. However, in extreme cases, such as moisture getting inside the device, it is better to contact a service center.

As a rule, if an Apple tablet turns off and does not turn on, this means that there is a failure in the device's power supply system. In this case, the tablet can turn on or off on its own, periodically changing the battery charge level. Usually, with such problems, replacing the battery helps, even if the gadget was purchased recently.

Only experienced specialists can accurately answer the question of what to do when the iPad tablet does not turn on. Timely contacting a specialized service center will help you avoid more serious problems and unnecessary costs.