Login to TP link router 192.168 0.1. login to your personal account. How to use the installer to automatically set up equipment

Do you want to set up your home Internet or Wi-Fi, but you can’t log into the ill-fated address 192.168.1.1 and log into the router (LINK, if it doesn't work, read on)? This instruction is for you. Very often, providers independently configure their devices: routers, routers, TV set-top boxes, FTTB equipment.

But, as a rule, this requires additional time or money. Although a user can understand this issue even with minimal knowledge. With our tips and tricks, you will learn how to access 192.168.1.1, set up the Internet or Wi-Fi and get a lot of other useful knowledge on correctly and safely configuring network devices.

Login http://www.192.168.1.1 admin video manual on how to enter the router settings.

We remind you that to configure devices from D-Link, you must use a different login address, namely http://, password and login admin/admin.

First, a few simple concepts to understand the issue. The address 192.168.1.1 is nothing more than an IP, which can usually be assigned by default to some types of devices, such as Internet modems, routers, routers, etc. By entering this address, like the name of any website, into the address bar of a browser such as Firefox, Chrome or Opera, you can enter the settings of this device. Some new router models are configured via the Internet on the sites tplinklogin.net (admin admin) and routerlogin.net.

If you did everything correctly and the connection to the IP address was successful, you will see a window for entering your login and password, by entering which you will have full access to the settings. The standard login and password are usually admin/admin, administrator/administrator and other combinations; you can find more details in the instructions for your model.

If you can’t access 192.168.1.1 and 192.168.0.1 when setting up the router.

If you cannot log in to either 192.168.1.1 (log into the TPLink router) or 192.168.0.1 (log into the Dlink router), usually in this case the error “Page unavailable”, “Page not found” or “Unable to connect to the server” appears. and etc.

What to do in this case?

1. Make sure the device is connected correctly, i.e. connected to the network (the indicators on the device body should be lit), the network cable must be connected at one end to the modem, router or router, and the other end to the computer or laptop. This is a prerequisite for initial setup. (Sometimes a Wi-Fi connection is enough, but it’s better to play it safe and connect with a network cable.) If everything is connected correctly, the Power and LAN lights on the case should light up. If these indicators are not lit, then your modem or router is broken!
2. Check your network settings; to do this, go to the appropriate section of the Windows Control Panel. In Windows XP it is "Network Connections", in Windows 7 and 8 it is "Network and Sharing Center". We find the icon for your network connection; depending on the configuration, it can be either “Local Area Connection” or “Wireless Network Connection”. Point the mouse at it and press the right button, then go to “Properties” - “TCP/IP v4”. In the standard version, all checkboxes are set to automatic, you need to set the following parameters: IP: 192.168.1.2. Subnet mask: 255.255.255.0. Default gateway: 192.168.1.1. DNS: 192.168.1.1. Gateway: 8.8.8.8. And click "OK".
3. Check your Internet browser settings; to do this, select the “Network and Internet” section in the “Control Panel” and go to “Internet Options”. Next, at the very bottom of the tab, you need to go to “Network Settings” and make sure that the proxy server settings are not checked, otherwise uncheck it.
4. Try visiting http://192.168.1.1 from another Internet browser, such as Firefox, Google Chrome, Opera. The connection may be blocked by one of these browsers.
5. Reset your router, modem, or router by pressing the reset button on the back of the device with a paper clip.
6. If all of the above steps do not lead to a positive result, try disabling the Windows Firewall and other various firewalls, antivirus programs and firewalls. You can also disable the Firewall through the Control Panel.

If all else fails and you still cannot connect to the settings, the device is most likely faulty, contact a specialist or technical support of your Internet provider.

Sometimes it happens that the connection to 192.168.1.1 is successful, but the settings are not allowed due to an incorrect login or password. In this case, resetting the parameters to standard via the reset button is also suitable.

Note: for some models and manufacturers of network devices, 192.168.1.1 is the standard address for entering the web interface. But sometimes, depending on the network configuration, a different address may be required for setup - 192.168.0.1. Popular network device manufacturers: Zyxel, TP-Link, Cisco, Lyncsys, Upvel, D-Link, Asus, Sagemcom, Netgear use these two addresses in most cases.

If it doesn’t help, study the detailed instructions with the video - how to enter the settings of the TP-link, D-link, etc. router. Ask your questions in the comments!

192.168.1.1 - the main address for setting up modems, routers and the Internet.

192.168.1.1 admin admin - login and password pair for accessing the web interface for setting up routers and modems, as well as other network devices.

192.168.1.1 admin - main administrator password.

http://192.168.1.1 - IP address that must be entered in the top line of the browser to access the device settings.

192.168.1.1 login - via any Internet browser.

192.168.1.1. and http://192.168.1.1/ - options for writing the address for setting up network, including Wi-Fi devices.

192.168.1.1 admin password - the main password to access the settings.

192.168.1.1 configuration - performed after entering the web interface and the configuration menu for a specific type of network device.

192.168.1.1 admin admin password - the most popular login and password for setting up routers and routers; after setting them up, it is advisable to change them.

http://192.168.1.1 login via admin - enter this address in the browser to log in.

192.168.1.1 login admin password admin - what you need to enter when the login window appears. 192.168.1.1 administrator login - login with an administrator login and password to set up the Internet or Wi-Fi network.

http://192.168.1.1/admin - incorrect login address.

192.168.1.1 admin login - to log in you need to know the login and password for your device.

192.168.1.1 admin admin password login - if this combination is suitable, you can proceed to the Internet connection.

192 168 1 1 - a variant of writing the address without spaces, also incorrect.

http://192.168.1.1 input - the word “input” does not need to be written.

192,168,1,1 is also incorrect.

192.168.1.1 password - the login password can be changed in the corresponding item of the web interface.

http://192.168.1.1 login admin password admin - standard account to enter the settings.

192.168.1.1 setting up Wi-Fi - after creating an Internet connection, make sure that it works and proceed to setting up a wireless Wi-Fi network.

192.168.1.1 admin admin set up Wi-Fi - you will be able to set up a wireless network only after connecting the device to a computer or laptop.

192.168.1.1 admin/admin - use this pair to enter the settings.

192.168.l.l - invalid login address.

192.168.1.1 login - enter this address in any browser to login.

192.168.1.1 admin - panel - settings panel for your device.

192 168 1 1 admin admin set up Wi-Fi - you can set up Wi-Fi only if your device supports this function.

Wanting to set up a router, many users often encounter many problems. One of them is the lack of access to the router itself, when when entering the router address in the browser line 192.168.0.1 (192.168.1.1), the user receives a message about the impossibility of logging into the router and opening the page. In this material, I will explain the reasons for the lack of access through 192.168.0.1, and also explain how to correctly log into the router through 192.168.0.1.

There may be several reasons for the problem of logging into the router. The most common ones are the lack of connection between the computer and the router, incorrect settings for the connection itself, problems with the network card, an error in typing the IP address, as well as a simple malfunction of the router itself. I will describe below how to solve the problems listed below (and similar ones). “Have you tried turning it off and on again?”

What you need to check first if you can’t enter the router settings

Before diving into explanations about the correct IP connection settings, try performing a number of template actions, which often help fix many problems with the ability to log into the 192.168.0.1 router:

We use a network cable

To eliminate the possibility of incorrect WI-FI settings, it is better to connect to the router via a standard network cable (regular twisted pair cable with RJ-45 connectors).

Popular causes of malfunction

Usually, the main reason for the lack of access to the 192.168.0.1 router is the static address of your computer, instead of the dynamic one. To fix the problem, do the following:

• point the cursor at the network connection icon with a triangle, right-click and select “Network and Sharing Center”;
• click on “Change adapter settings on the right”, then right-click on “Local Area Connection”;
• select “Properties” in the list;
• in the menu that opens, click on “Internet Protocol version 4 (TCP/IPv4)” and click Properties;
• make sure that you have a checkmark next to automatic IP and DNS detection, then click “OK”.

To enlarge the image, click on it

If this was the problem, then now you can easily connect to your router.

The general process for fixing problems with logging into the router can be found here:

The username or password you entered is incorrect

If you log into the router and it asks you for a password (which you did not set), then do not despair. Enter admin in both the login line and the password line, and everything will work out (instead of the admin password there can also be an empty field or 1234, there are also 0000 and 1111).

Conclusion

As you can see, the main reason for the lack of access to the router is incorrect network settings, when instead of dynamic IP and DNS, a statistical IP address is set on the computer. Problems logging into the 192.168.0.1 router with a network card or network cable may also be relevant; there is no need to rule out a simple breakdown of the router. In the case of the latter, you can take the router for testing to one of the service centers, and also consult with a competent specialist.

In contact with

Don’t know how to set up a router (home Internet)? Can’t access the router settings page 192.168.1.1/192.168.0.1 or the login/password doesn’t work? We will help you deal with certain problems in our article.

What is 192.168.1.1 or 192.168.0.1

The numbers provided are the network address or IP to enter the settings menu of your device; to get into it you need to use a browser. These IPs are installed by default on most models of network routers from various companies.

The numbers are entered into the address bar of any browser, after which a window pops up in which you need to enter your login and password. The default password and login is the word “admin”, after successful entry you will see the web menu interface. You can also log in to 192 168 1 1 using “admin” from another device that has a Wi-Fi receiver. Since there is no protection installed on it by default, all you need to do is connect to the network, and enter everything listed above through the browser on the device.

What to do if 192.168.1.1 does not open (inaccessible)?

— Problem with the browser
One possible error could be a problem with the browser if the device detects the connected router. You need to install another browser and repeat the action of entering the menu. If this does not help, you need to check your browser for viruses and unwanted extensions.

— Problem with antivirus/firewall
The next error is the antivirus blocking the network address. It can be solved by disabling the firewall (protector against unwanted network traffic) for a while, or by adding the network address to the list of safe sites. The standard Windows firewall is disabled in the following way: control panel - system and security - firewall - disable windows defender. It is worth noting that this error occurs very rarely.

— Problem with wire contacts or wi-fi network
If, when connecting to your PC via a standard cable, it is not detected, you should carefully check all connections and connection indicators on it. You also need to check that the Ethernet cable is connected correctly; perhaps the input was simply mixed up. The cable must be plugged into the socket, which is located separately from the others and highlighted in blue. If you are connected using a Wi-Fi receiver, you should check that it is working properly, as well as the availability of drivers for its operation.

— Problem with the network card
This problem often occurs after installing a new operating system. In order to fix it, you will need to install the driver package, which usually comes with the system unit. It is also important to check the Internet protocols used. To do this, you need to enter the network settings, click on “local network connections”, then properties, and here check the checkboxes next to protocol versions 6 (TCP/IPv6) and 4 (TCP/IPv4). All other options for a network card malfunction are most likely due to a breakdown or incorrect connection. Ultimately, this may be a malfunction of the device itself, which requires contacting a service center.

How to find out the login and password for 192.168.1.1 login?

As mentioned above, the standard password and login is the word “admin”. Sometimes this can be a combination of words, where the login is admin and the password is password. Most manufacturers indicate on the reverse side: network address, menu access data, which are set by default.

You need to check the layout and correctness of data entry, then try changing the browser or device through which you log in. If all these steps do not help, then you need to reset the settings to standard. There is a hole in the back of the device that must be pressed with something thin (a paper clip or a needle) for 10 seconds or more. After this, everything will return to factory settings and you can enter the menu.

How to set or change the password 192.168.1.1

So, after successfully entering the menu, you need to find the Wireless-security section (wireless mode - protection), here you need to select WPA2-Personal protection and set a password that suits you, saving the changes.

What needs to be done in 192.168.1.1 to set up the Internet?

In the web interface, you need to select the network-wan section, then fill out the fields in this section as follows:

• In most cases, the connection type should be left as default, or you should set the settings for your country.
• In the username and password column, enter the data from your agreement with the provider.

In the “wireless mode” section, you can set the name of your network, set protection, and find out the number of users currently connected. Many of the items that are regulated automatically can be left as default. Most routers have quick setup - this means that all the parameters that need to be configured will pop up in a special window, all you have to do is fill them out. You can also take advantage of the help of a specialist who will install and configure it himself in the shortest possible time.

We will tell you about common problems that most users encounter when setting up routers. One of these problems is the problem with accessing the router’s web interface.

Quite a lot of people are facing this problem when you enter IP 192.168 0.1 or 192.168 1.1 and the router settings page does not open or the error “Page is not available” appears. Therefore, we will try to understand this situation. This will be a general article and will be suitable for all devices.

What should I do if I can’t enter the settings for IP 192.168 0.1 or 192.168 1.1?

You have connected everything, type the IP address of the router in the search bar of your browser and it gives you the error " The page is not available", "The page cannot be displayed", "Page not found", this error appears differently in different browsers, but the essence is the same. This error can appear due to various problems, for example:

1. There is no connection to the router (bad or damaged cable, drivers are not installed on the network card-Wi-Fi adapter or there is no connection to the Wi-Fi Internet or incorrect connection).
2. Incorrect connection (Automatic IP acquisition is not set).
3. An attempt to access the web interface using the wrong IP address of the router.
4. The address 192.168 0.1 or 192.168 1.1 may not open due to the fact that the router’s IP address has been changed.

Before performing any manipulations, we recommend that you take simple steps:

1. Try going to another browser and entering the router's IP address into it.
2. Make sure the power is plugged in.
3. Try restarting your router or your computer.
4. Try setting up from another device (Laptop, tablet or smartphone).
5. You can also disable your antivirus, it may help.

Determining the correct IP address of the router

First of all, make sure that you are opening the correct IP address in your browser; manufacturers of different devices use different addresses to enter the router settings menu. This address is usually located on the back of the router, or just type 192.168 0.1 or 192.168 1.1 into the address bar of your browser. It may also be that the manufacturer may write IP in this format on the back side( https://tplinkwifi.net).

Checking the connection to the router

Check the connection in the lower right corner. If it is missing, you will not be able to connect to the router. If you are connected via a network wire, you will see a window in the lower right corner that shows the status of the connection or its absence.

If you see a different connection status, for example (a red cross), even though you want to go to the settings panel via a network cable, then you do not have a network connection with the Wi-Fi router.

Solution to the problem:
Check if your network cable is connected correctly. On the router, one end of the network wire should be connected to " LAN"port second end in network card computer. This is what it should look like.

If you did everything correctly and there is still no connection, then your wire may be damaged, then try replacing it with a normal wire and try again. Also, the lack of a network may be due to the fact that you did not install drivers on the network card or it may be damaged. Try logging in from a laptop, tablet or smartphone.

When connected via Wi-Fi, you should see signal bars in the lower corner of your desktop. If there is a yellow sign next to it, then you have connection problems.

Checking the settings for obtaining an IP address

On the PC in the network settings it is set static IP address, most likely your PC cannot establish a connection with the router because of this. Therefore, you need to check the parameter automatic IP acquisition for the connection through which you are going to connect.

Attention!!!: if you cannot access the Web interface when connected via cable, check in the control panel of your PC " LAN connection", and if via Wi-Fi, then " Wireless network connection".

Now we will show you in detail how to do this:
Click on the icon with the right mouse in the lower right corner of the desktop, you will see a window click Network and Sharing Center.
In the window that opens, click on the left Change adapter settings.
Select the connection with which you are connected and right-click - select Properties(we show using Wi-Fi as an example).
Select the line Internet Protocol Version 4 (TCP/IPv4) and press Properties. Make sure that automatic retrieval of IP and DNS is checked. If not, check the box and click apply. After this, restart your computer.

When trying to enter the settings, it detects an incorrect name or password

Try entering the username and password that are listed on the back of the router; in theory, everyone has the standard one (admin, admin). If this data does not match, most likely someone changed it when setting up your router. Try resetting the settings by pressing the button Reset.It may be that your router has turned into brick after unsuccessful firmware. The problem could also be due to a breakdown. Pay attention to whether all the indicators are working or blinking differently than they should, then most likely your router is faulty. Then you will need to contact a service center.