Menu
homeExcel

Download virtual router codes plex dot com. Create a virtual router on windows xp

Virtual Router Plus- software that can organize uninterrupted distribution of a Wi-Fi signal from a laptop or PC (if there is an installed wireless module), without using a router. Such actions will allow you to share your Internet connection with friends and family, for example, while traveling in public transport or in any other place where there is no public wireless access point. Or, if you just use cable Internet directly.

This utility has earned its popularity due to its ease of setup and friendly, intuitive interface. In addition, it is freely distributed and anyone can use it. The only drawback is the lack of Russification, but setting up the access point is so simple and fast that this nuance does not cause any discomfort to the user.

The program is supported by all versions of Windows OS, from XP to the new 10. The distribution kit is very small in size (about 4 GB) and does not require a full installation due to its portability.

Download Virtual Router Plus

Immediately after downloading, all you have to do is launch it and perform a few simple operations. First of all, you need to allow network sharing and select wireless connection ## in the list of connections (it’s different for everyone). After this, you can return to the application window and start the distribution by filling out the required fields. That's all, you can enjoy surfing the net. The utility remains active, and the availability of the connection can be determined by the icon displayed in the tray.

It is worth noting that Virtual Router Plus does not suffer from compatibility problems with various devices and constant connection interruptions. That is why many users preferred this software.

In general, the main feature that distinguishes the application described above from its closest competitors is the ease of setting up operating parameters and the stability of distribution, which gives Virtual Router Plus an undeniable advantage and well-deserved popularity among users.

If Virtual Router is not suitable for you, we recommend using a very simple utility. Try all its features for free!

Virtual router manager is designed to help if you do not have a real wi-fi router, but you need to distribute one. Its main task is to simulate a wi-fi router, so you can forget about any wires and inconveniences. The program is reliable and licensed, there are no viruses in it, and you can download virtual router manager completely free of charge. The program is compatible with the Microsoft Windows XP, Seven and higher operating systems.

What devices is the program compatible with?

The key condition for the correct operation of the program is the presence of wi-fi on the distributing and receiving devices. Receiving devices can be: iPhone, iPod Touch, netbooks, laptops, audio devices, wireless multifunction devices, smartphones, Android phones or Zune and others. The distribution device (usually a computer) on which the program is installed must have a wi-fi adapter.

Where can I download Virtual Router?

You can download virtual router manager on the official website or on torrents. Please note that the file must only have the extension ".exe" or ".msi". Anyone can set up the program, even without reading the instructions. Using the program is even easier than installing it.

How to get started with virtual router manager?

To distribute wifi on Windows you will need to perform the simplest manipulations:
  • indicate the name of your network correctly;
  • enter password;
  • Click on the “Start” button.

Entering a password is necessary for the security of the transmitted data, so that another person cannot unauthorizedly connect to your virtual distribution. All devices that you connect via virtual wifi will be displayed in the program window. If necessary, you can even find out the IP and MAC addresses of each device by looking at them in the program window.

Working with the program

At its core, the Russian version of virtual router manager is a shell, that is, it is capable of performing all the settings for you. To gain access via wifi, just launch the program and then minimize it to tray. With these actions, every time you turn on the computer, it will automatically start.

Setting up the program

The setting comes down to filling or selecting in 4 lines:
  • to create a wifi network, you need to come up with any name for it in the top field;
  • in the next field we come up with a password consisting of at least 8 characters;
  • in the “Shared Connection” drop-down menu, select the connection through which the computer connects to the Internet;
  • In the bottom drop-down menu, select the desired connection type.
Press the central button “Start Virtual Router” - the settings are completed. In the same settings window you will see “Peers Connected”, where all connected portable devices will be displayed to which wifi will be distributed.

How to choose the right connection type?

In order to competently create a network, you need to select the desired type of connection - this is important! There are two modes: access point or ad hoc.
  • Ad hoc. This mode provides a point-to-point connection. Translated into simple language, only one device can be connected to a virtual router.
  • access point. This mode will allow you to connect a large number of receiving devices to the “access point” (wi-fi distributing device). Possible problems and their solutions

Possible problems and their solutions

We are all accustomed to the fact that the router is responsible for distributing the Internet and creating a home network. Has anyone thought that it is possible to create a Wi-Fi network without it?

To do this, you can use any computer equipped with a Wi-Fi adapter. This article will look at options for distributing Wi-Fi from a computer running Windows XP, because... It often happens that this computer does not have very “strong” hardware and newer versions of Windows may simply “not work” on it. So let's get acquainted with how to make a virtual router for Windows XP.

There are three options for creating a virtual router for consideration:

  1. Using the VirtualRouter Plus application.
  2. Using Windows XP itself.
  3. Using the D-Link AirPlus XtremeG Wireless Utility app

First option

Download the program from the Internet. To do this, enter “virtual router windows xp download” or “VirtualRouter Plus” in the search engine. This application is free and does not need to be installed. We launch the program by clicking on the executive file “VirtualRouterPlus.exe”.

Program menu

Setting up "VirtualRouter Plus"

To run the program, perform the following steps:

  1. In the SSID line we write the name of the network being created.
  2. In the “Password” line, enter the password to enter the network being created (at least 8 English characters or numbers).
  3. In the line “Shared Connection” we look for the name of your connection to the Internet.

We press the “Start Virtual Router Plus” button, the application is automatically minimized to the tray and begins to “distribute” the Internet to any Wi-Fi devices.

Network created on "VirtualRouter Plus"

Second option

If suddenly the “VirtualRouter Plus” application does not work, and you need to create a network, then you can try the second option and build a wireless network in Ad Hoc mode.

In this mode, computers communicate directly with each other. A peer-to-peer connection is made using the “point-to-point” type; computers communicate without using an access point.

Ad Hoc mode operation option

The main advantage of this mode is its ease of implementation (no additional access point is required). This mode can be used to build a temporary data transmission network.

Please note that this operating mode transfers data at a speed not exceeding 11 Mb/s. But the actual speed will depend on the number of devices on the network; the more devices there are, the lower the speed.

Setting up Ad Hoc Mode

For example, we use a wireless USB adapter. When using other Wi-Fi distribution devices, the settings remain the same. When you turn on the adapter, we install the necessary drivers. Open the “Network Connections” window, which should display a new “Wireless Network Connection”.

Network connections window

We will create a wireless network from a desktop computer and a laptop, and in the future you can connect other devices to it. Open our wireless connection, go to its properties - the “Wireless Networks” tab and turn on “Use Windows to configure the network.”

Wireless menu

To establish a wireless connection, you need to register static IP addresses. This is done in the properties of the wireless connection - in the “General” tab, Internet Protocol (TCP/IP).

Internet protocol settings menu (TCP/IP)

On a desktop computer we enter the address: 192.168.0.1, on a laptop: 192.168.0.2, on both “machines” the subnet mask: 255.255.255.0.

Next, we start the Windows service by double-clicking on our wireless connection. On a desktop computer, launch the “Set up a wireless network” mode. The Network Setup Wizard will open, where you will need to enter the name of your network (any in English letters) and the access key. After this, setting up the desktop computer is completed.

Wireless Settings Menu

Now we also turn on the Windows service on the laptop, and in the window that appears, go to our network. The Windows service will ask you to enter a key and if it matches the key entered on the desktop computer, the devices will connect and create a network. To connect other devices, you need to perform all the steps that we did with the laptop, the only difference is that the static address will be different.

Third option

To use this program, you need to disable “Use Windows to set up the network”, click on the properties of the wireless connection, then wireless networks, uncheck the box we need. We launch the program on a desktop computer and go to the “Settings” menu.

Settings menu

In the SSID field, enter the name of the network to be created, select the Ad Hoc mode, and in the “IP Settings” menu enter the address and subnet mask (exactly the same as in the second option). Leave the “Authentication” and “Encryption” fields open.

On the laptop we also launch this application and go to the “Browse networks” menu.

Network overview menu

In this menu, select our network and configure the laptop’s IP address by clicking the “Configuration” button. After that, click “Connect”, enter the access key and our devices are connected. To connect other devices, repeat the above steps, just don’t forget to change the IP address.

Now you know how to create a wireless network without using an access point. This can be useful in “field conditions”, for example at the dacha, when you need to connect two computers, but there is no router at hand.

Virtual Router Manager

Without Wi-Fi technology, the life of most modern people is unthinkable. First of all, it is very convenient: you can use the Internet both at home and at a train station or airport, in various institutions and enterprises. Therefore, it is extremely important to understand how this technology works and be able to use it correctly.

What is a virtual router?

A device that forwards information packets between segments (computers) within a network. It is routers that allow us to use wireless Internet: computers or other devices that we connect to any network are united by the router into one network, allowing them to simultaneously use the Internet.

A virtual router is a technology that allows you to create a virtual device based on just one network card that performs all the same functions as a real one. At the same time, the device itself does not physically exist: one might say, our computer becomes a router. There is no need to fuss with wires and setup.

Any computer with Windows 7 installed provides this opportunity.
There are two possible ways to do this:

  • Use technology implemented at the kernel level and configure the connection via the command line;
  • Use additional software that takes care of the setup task and provides a convenient interface;

Having figured out why we need this, we will consider both options in detail.

What are virtual routers for?

Surely you've had to share Wi-Fi from your phone more than once? For phones with the iOS operating system, just enable “modem mode” in the settings, enter the network name and password - you’re done! Your phone at this moment becomes a full-fledged Wi-Fi distribution point. Each time you use this function on your phone, you actually create a virtual router, uniting the users connected to you into a single network. The only difference is that it's a little more difficult to do on Windows.

So, the main reasons for use:

  • The need to “distribute” Wi-Fi to another person as quickly as possible;
  • Saving money by not having to purchase a router;
  • Lack of an electrical outlet nearby to connect the router;

Installation and configuration

Method 1. We use the technology built into Windows 7.

We need the command line. To call it, press the key combination Win+R:

Run "Run" using win+R

Enter “cmd” in the window that opens and click OK

Run window in Windows 7

A command prompt window will open. Type netsh command and press Enter.
Then we write the following line:

wlan set hostednetwork mode=allow ssid=»name» key=»password» keyUsage=persistent

Here name is the name of the future network, password is the password, respectively. Keep in mind that the password must consist of more than just numbers or letters

Press Enter, if everything went well, we see the following:

Don't close the command line! We will still need it.

The network adapter (virtual Wi-Fi) has been created, however, let's check. Go to the Control Panel, go to the Network and Sharing Center, and then go to the “Change adapter settings” section

Among the list of networks we should see the following:

As you can see, our connection has been created, but does not work. Open a command line window and write:

wlan start hostednetwork

After which we see a notification that everything is running:

Go to the “Network and Sharing Center”. Now our point works:

Ready! At this stage, the creation of a virtual Wi-Fi router is completed.

Method 2. Using specialized programs.

To configure a virtual Wi-Fi point without resorting to the command line and to be able to manage our network, you can use special programs.

What is the significant difference between this method and the first? It's a matter of functionality. Let's say you wanted to change your network name or password without running to the command line and without wasting time entering some commands there. Or, for example, you want to monitor which computers are connecting to you and, if desired, block them. These capabilities are provided by software such as Connectify.

You can download this program either from the official website or from any other source. Installation is also as simple as possible and will not cause any problems.

There are only a few obvious fields in the main program window: Name, Password and Internet to Share. We set the last parameter to automatic, since the program itself will select the desired connection for distribution.

Click the Start Hotspot button and you're done! In the Clients tab we see a list of devices connected to us, which we can easily block:

Results

We got acquainted with what virtual routers are and what they are used for, and looked at the main ways to organize them on your computer. Which method to use is up to you. In any case, the technology of creating virtual routers is a skill that is extremely useful for any user. In addition, by studying this topic more seriously, you can learn many more interesting things for yourself.

Do you need to turn your laptop into a wireless Internet access point? Then the functional Virtual WiFi Router program for Windows XP will help. Using this software, you can distribute Wi-Fi to all devices around. The software interface is simple and will be understandable to a beginner.

The user's tasks include determining the network login, password for it and the maximum number of contacts allowed for the connection. The main thing is to have an Internet connection on your personal computer. The application runs in the background. No additional equipment, such as a router, is required. WPA2 technology is used. We recommend downloading Virtual WiFi Router for Windows XP in Russian without registration and SMS from the official website.

Program information
  • License: Free
  • Developer: Ravi Kanth Eeswar. R
  • Languages: Russian, Ukrainian, English
  • OS: Starter, Professional, Home Edition, Zver, Service Pack 1, SP2, SP3
  • Bit depth: 32 b