ZTE router standard password. How to configure the ZTE ZXHN H108N modem. Doesn't allow me to access settings

Setting up WiFi router ZXV10 H208L and ZTE ZXHN H208N. Detailed instructions for setting up “Router” mode and creating a wireless WiFi network.

The ZXV10 H208L (ZTE ZXHN H208N) device simultaneously combines the functions of an ADSL modem, a wifi access point, a SIP telephony client, and in addition a router. The modem has one external port - WAN (Wide Area Network) and four internal ports - LAN (Local Area Network). WAN is used to connect an Internet network cable to the modem. LAN ports provide connection of various devices (PCs, laptops) to the internal network. The modem is configured via the Web interface. To access it you need a browser such as Google Chrome.

Settings Features

We can configure it as follows: in Bridge mode (the Internet will be connected to only one computer), in Router mode, or by opening ports.

In Router mode, the Internet connection is made directly through the modem. The advantage of operating the modem in this mode is the ability to simultaneously use the Internet with various devices (tablet, smartphone, PC, etc.). To set up wifi, you must first set up the Router mode.

Setting up wifi on byfly modems, in most cases, is a simple process and does not require special knowledge and skills. Please note that before setting up wifi on byfly modems, you should perform the following operations.

1. You need to install the model of your modem (ZXV10 H208L or ZTE ZXHN H208N).
2. Check whether the modem is connected to a personal computer or laptop via a network cable.
3. Make sure the connection is working when connecting to the Internet via a network cable.
4. Set up wifi on the byfly modem according to the instructions.

Setting up in Router mode

The ZXV10 H208L (ZTE ZXHN H208N) device is initially in Bridge mode, that is, access to the Internet is available from only one PC; to switch to Router you need to follow the instructions discussed below.

Setting up the ZTE ZXHN H208N modem. Setup of the ZTE ZXHN H208N modem

Settings modem ZTE ZXHN H208N router, setting WiFi, IPTV Setup of the ZTE ZXHN H208N modem in a router,the

Setting up a wi-fi router zte zxhn h108n, internet, wi-fi, interactive TV, multiroom

Detailed description of DSL wi-fi ZTE router zxhn h108n, setting by master and manually Internet, interactive TV, wi-fi

Launch a browser, preferably Internet Explorer, enter the router parameters - 192.168.1.1

Read also

How to set up a Xiaomi phone: Redmi, Note 4 are not different. Only basic optionsNewsRead the detailed summary and useful tips on how to set up a Xiaomi phone. Web, Wi-fi, language not fingerprint sensor. The answer is simple, not in one article. Everyone knows...




How to check the authenticity of Samsung a50 smartphone Along with the high technology associated with the new Samsung A50 phone model, people tend to think that they can get the same features at a much lower price. Due to lack of awareness...




Sometimes you get a very annoying call or send messages from a subscriber you don’t want to hear, otherwise it’s just spam and similar unwanted contacts. In order to prevent this, it is enough to block them to get rid of it forever...



Dropped my iPhone. The screen does not work If you dropped your iPhone and the screen does not work, first you need to calm down. The consequences of a fall can be severe, but there are effective ways to troubleshoot your phone without the help of others. Prerequisites for...




How to install Russian language on a HUAWEI smartphone (honor)?. Most of the world's smartphones are developed and assembled outside of Russia. Therefore, the main language of the smartphone interface is also not Russian. Usually, when you turn on your smartphone for the first time, you will be prompted...

Open the browser, enter http://192.168.1.1 in the address bar

A new tab will open. Enter the value admin in the Username field and admin in the Password field. Click the "Login" button.

Go to the Network Interface/Network menu.

Next, fill in the Connection name, you must select the PVC0 option, and if it is missing, select Byfly.

You need to remove the Bridge connection. To do this, click on the “Delete” button.

A new tab will appear. Enter the name of your connection in the New Connection Name field, for example, PVC0. Next, go to the VPI/VCI field, where you should enter 0/33. Enter the information from your agreement in the appropriate Username and Password fields, click the “Create” button.

If there is no Internet connection, it is worth checking that the Username and Password information is correct.

Wi-Fi setup

To configure Wi-Fi on the ZXV10 H208L or ZTE ZXHN H208N device, you must press and hold the “Wlan” button for about 20 seconds, after which the corresponding indicator should blink. We enter the router settings as indicated above.

Go to the Network Interface tab.

Read also

How to change the SmartHub region for Samsung KPosted 02/08/2017 by by andreyHow to change the SmartHub region for Samsung KYou need to complete a number of steps. Preparatory TV setup Replacing the IP address Installing (unlocking) Samsung smarthub From the off state...




This 60+ Wi-Fi Water Leak Detector only does the basics, but it does them well. There was an error sending this page via email. Sensentric SimpleSENCE Home Leak Freeze Detector The water leak detector when you really...

How to connect a phone to a computer via USB: Solutions to the problem How to connect a phone to a computer via USB if it does not connect to removable storage, but only charges? A very common problem for users who use...




Oppo is launching its new smartphone called Oppo A31. This device comes with many new features and modern technologies. Recently, 91mobiles published a poster of the Oppo A31, designed to feature a triple rear camera setup...

If you don't see your router's IP address in the list above. There are two additional ways to determine your router's IP address:

1. You can also follow the guide on How to Find Your Router Address.
2. Or you can use our free software called Router IP Address.

Now that you have internal IP address your router, we are ready to log into it.

Logging into the ZTE router via the web interface in a web browser

ZTE has a web interface for configuration. You can use any web browser you need to log into ZTE. In this example we will use Internet Explorer.

Enter ZTE internal IP address

Place your ZTE's internal IP address in the address bar of your web browser. It looks like this:

Then press the Enter key on your keyboard. A dialog box will appear asking for your ZTE username and password.

ZTE router password and default username

You need to know your username and password to log in to ZTE. All default usernames and passwords for ZTE are listed below.

Enter your username and ZTE password in the dialog box that appears.

Steps to change WiFi password for SLT ADSL - ZTE

1. Open your browser and enter 192.168.1.1 and press Enter.

2. A pop-up window will then open and ask you to enter your credentials. Enter the username as admin and password as admin and click the login button. (This is the default username and password for the SLT router configuration page, you can change it at any time after logging into the router configuration page)

3. The router configuration page will open and click menu INTERFACE SETUP, and then select Wireless(see image below).

4. Now go to the bottom of the page to the WiFi password section and change the WiFi password.
Changing the Pre-Shared key will change the WiFi router password.

5. After entering your password, scroll down to the bottom of the page and click the “Save” button.

6. That's all. You have successfully changed your ZTE password.

Forgot your ZTE router password? You need to reset your ZTE router

Have you changed the username and/or password of your ZTE router and forgotten why you changed it?
Do not worry: All ZTE routers come with a factory default password, which you can revert to by following the instructions below.

Resetting your router to factory defaults is a serious step. However, sometimes when you have no other way to access your router, this step is necessary. In particular, if you can't log into your router normally (perhaps because you forgot the password), this may be your only resource. Before resetting your router to factory settings, make sure no passwords are working, including default passwords.

Reset ZTE router to default, this will reset ZTE password to default

If you decide to return your ZTE router to factory default settings, you must perform a 30-30-30 reset as follows:

1. When your ZTE router is turned on, press and hold the reset button for 30 seconds.

2. While holding down the reset button, turn off the router's power and hold the reset button for another 30 seconds.

3. While holding the reset button, turn the device's power back on and hold for another 30 seconds.

Your ZTE router should now be reset to its new factory settings. Check the table to see what it is (Most Likely No/No).
Important: Don't forget to change the default username and password to increase the security of your router after a factory reset, since default passwords are available all over the Internet (for example, here).

I still can't access my ZTE with default password

Make sure you follow the reset instructions correctly as the router should always return to factory default settings (ZTE password and login) when reset. Otherwise, there is always a risk of damage to your router and it may need to be repaired or replaced.

How to change the wireless channel on my Wi-Fi

Example. The performance of your wireless router may be affected by interference from other nearby routers. You can change the wireless channel to one with less interference.

Step 1. Open an Internet browser (such as Internet Explorer) and enter http://dlinkrouter.local or http://192.168.0.1 into the address bar. Press Enter.

Step 2. Enter the password for the administrator account in the field. If you have not changed this default password, leave the field blank. Click "Login".

Step 3: Move your cursor to the Settings tab and then click Wireless from the drop-down menu.

Step 4: Click " Additional settings" for the band for which you want to change the wireless channel. Select a channel from the drop-down menu " Wi-Fi Channel". The mode selection process is the same for the 2.4 GHz and 5 GHz bands, however the options available for each band are different.

2.4 GHz band:

5 GHz band:

Note. In most cases, you only need to change the channel on the router. Most wireless adapters automatically detect the channel used by your wireless network.

Changing LAN IP Address on ZTE

If you followed our navigation guide above, you should see this screen.

We start this guide on the home page of the ZTE router. Want to change your IP address? You've come to the right place. We'll show you how.

ZTE routers are known to Russians. Megafon supplies subscribers with mobile options that cover exclusively the cellular network. Reception speed reaches 150 Mbit/s. The modem distributes wireless Internet. The portable option is often the choice of remote, relatively small settlements. Residents of Udmurtia are now familiar with the MR150-5. A region to the north of which there are only forests and tundra.

Chinese ZTE products are characterized by relatively low cost and availability. Even prisoners appreciated the benefits of 4G mobile communications. Recently, attackers tried to transfer 29 ZTE routers to the Tula colony. Valiant law enforcement officers managed to prevent the illegal transaction. Let's see exactly how to configure the router. Often the audience is interested in instructions for changing the password.

Briefly about ZTE

In addition to routers, mainly mobile ones, that supply subscribers with a Wi-Fi network, the Chinese corporation supplies a full range of user equipment, including IPTV digital television set-top boxes. Over half of the products produced are serviced by provider networks. Many Chinese telecommunications service providers now use domestic equipment.

The history of ZTE exceeds 30 years. One of the investors was the Ministry of Aerospace Industry of China. Initially, the main income came from consumer goods, but the booming communications industry overwhelmed the enterprise with government-managed orders related to CDMA cellular networks. As of 2006, 40% of the company's income came from operator equipment. At the same time, offers from foreign companies began to pour in. The first was the Canadian Telus.

A year later, Vodafone (UK), Telefonica (Spain), Telstra (Austria) ordered Chinese equipment. The 2008 client base included customers from 140 countries. ZTE took third place in the market of GSM communications equipment manufacturers (about 20% of global sales). Gradually, the company mastered the production of smartphones. The corporation's engineers filed over 48 thousand patents, and 13,000 were confirmed in just two years (2011-2012).

Sometimes the company's equipment does not work...

Define name

First of all, determine the true name of the device. For example, the MF920W is called by providers as follows:

1. MTS – 835F
2. Yota – MF920
3. Megafon – MR150-5

A thorough study of the issue will help you choose the right firmware. An incorrect version may cause the device to malfunction. This type of hardware will not turn on and will require flashing. By the way, studying the forums in advance will show the potential buyer the current problems of the model. For example, the one mentioned above often lacks a charger and there is no antenna output. Therefore, choose a different model for your dacha. An additional bonus is that amateur flashing utilities refuse to identify the modem.

Nuances noted by users will sometimes become the main criterion. A telecommunications store clerk interested in sales is unlikely to advertise the dark side of the equipment. For example, MF823 requires a Beeline card with a USIM sticker. Otherwise, 3G technologies are used instead of the fourth generation. There are no updated firmware versions.

Common Problems

Saving readers' time, the caring admin installed a plugin that draws convenient navigation according to the generated subheading tree. Therefore, we will devote a separate small section to each problem. ZTE primarily produces mobile modems, sometimes supplemented with a GPON fiber optic line interface.

Doesn't turn on

First of all, we remember whether the flashing was carried out. If unsuccessfully carried out manually, the operation completely removes access to the router. It is noteworthy that the appearance of the device (indication, backlighting of the Ethernet interface) is the same. However, it is impossible to connect a PC or equipment to the router. The browser writes: Unable to connect.

The hardware reset button is powerless to solve the problem. The firmware needs to be updated. Reputable manufacturers provide specialized utilities that help savvy technicians solve the problem. However, the Chinese manufacturer is keeping mum for now. Hackers have released the ZTE Unlocker utility, but the interface deals exclusively with the issue of unlocking (unlinking from a specific provider). The software actively exploits the diagnostic port specification.

A working device understands the terminal language, including the Windows command line. The operating system allocates a virtual directory to the device, within which commands stored in the router's memory are executed. For example, adb shell. However, standard management paths will refuse to help restore the firmware on the router. Enthusiasts offer the following option.

Sometimes the desire to unblock is caused by someone else. For example, the developer removed support for the FTTB protocol from the H108N model. All users of the interface were forced to immediately rollback. Only now... the manufacturer has released one utility that performs an upgrade. One way ticket.

Recovery utility

Often a broken ZTE modem is detected by the diagnostic interface. The official website (ztedevice) provides owners of MF30 (Beeline) exclusively with an update utility. There are no other models at all! The website 3ginfo.ru offers those who wish to download: “ZTE MF30 recovery kit”.

Now the folder containing the previously unpacked firmware image needs correction. The software read the device memory, adjusting the contents of the internal directory. However, the utility is powerless to enter IMEI. Therefore, edit the Channel1.nvm file yourself. Please enter the correct IMEI.

Now run any flashing utility (for example, 3ginfo.ru/downloads127.html). Feed the program the files, including the edited Channel1.nvm. Now the router is finally restored.

A similar sequence of actions helps to revive some other mobile access points (for example, MF90).

JTAG

It helps bring back life to many dead devices. Let's briefly describe the essence. In the 80s of the twentieth century, integrated circuit switching standards were deprived of a debugging interface. Therefore, in 1985, a special JTAG group was created to solve the problem. The industry standard became commercial (IEEE 1149.1-1990) in 1990. Intel immediately provided the 486 generation of processors with a debug interface.

Now the standard is used by electronics manufacturers everywhere. Initially, the interface was solely for testing purposes. Then the opportunity became of interest to debuggers, including the machine code level. Later, manufacturers figured out how to exploit JTAG by updating the firmware of flash memory chips. Real boards use the number of pins:

• 5 and so on.

The latter options are more often used when there are many parallel-connected microcircuits. The first option accompanies the star topology. Therefore, the problem is limited to calculating the pin layout of the JTAG port. Modern interfaces often contain 10 or more contacts, so take the trouble to find technical documentation that explains the meaning of the contact pads. The contacts themselves are round or rectangular in shape, often located along the edges, sometimes in two rows.

The pinout is difficult to find, since the subject is the bread and butter of repair shops. Try to puzzle thematic forums (for example, gsmforum.ru). You will also need a complete memory dump, take, for example, here 4pda.ru/forum/index.php?showtopic=255231&st=3040#entry36468746. The current memory dump (in reserve) is merged by the H-JTAG utility. You will need an adapter connector (the type is entirely determined by the utility used for recovery). Craftsmen usually adapt the now outdated LPT. Solder the adapter with shunt resistors, get specialized software (for example, Z_Flasher Reanimator is used to restore cellular USB modems).

A memory dump using the Giveio utility helps determine the processor type. This will be needed later when flashing. So, for work you need:

1. A utility for backing up the current memory dump.
2. Compatible modem firmware version. Try going to byfly. The FTP server provides a certain choice: H208N, ZXHN H208L, H201L, W300. By the way, the Belarusians took the trouble to post a beginner resuscitator kit, including instructions, in the shared server folder (ftp.byfly.by/byfly/firmware_modem/ZTE/).
3. Flashing utility via JTAG interface.
4. DIY connector. The utility sets detailed requirements for the adapter. An example of using LPT was given above.

Along the way, they exploit the capabilities of supporting software. For example, determining the type of processor.

Doesn't allow me to access settings

The live router is accessible via a browser or remote administration interfaces (TelNet, SSH). However, the admin panel does not launch inside. The factory settings have probably been changed. After making sure that you have the ISP password written down, try resetting the device with the Reset key (otherwise you will lose the Internet until your mother arrives). Then the previous equipment characteristics will return:

1. IP address.
2. Login.
3. Password.
4. SSID, Wi-Fi security key.

Refuses to distribute Wi-Fi

Ukrtelecom subscribers have flooded the TP with complaints: ZTE H108L refuses to connect wireless subscribers. You will need to change your settings.

1. Open the admin panel (192.168.1.1 in the browser).
2. Enter your login/password (admin).
3. Click Administration → System Management → Restore Factory Settings.
4. Apply the changes and wait until you reboot.
5. Re-enter your ADSL connection login/password.
6. Set the following settings on the Administration → TR-069 page:
   1. ACS URL – https://localhost
   2. Login – loose
   3. Password – 12345678

Port forwarding

It is often necessary to set up a home PC from the outside and organize a server. Network protocols use communication ports everywhere. The modem was originally designed with protection against hackers. Access inside (Intranet) is completely absent. Therefore, port availability needs to be configured. Let's demonstrate the technique of making adjustments using the example of H118N.

Note. The specified model shares Ethernet. The previous one (H108N) is equipped with two interfaces: FTTB, ADSL.

The simplest option to defeat Rostelecom hardware is to use the built-in Application menu. Activate the UPnP subkey. The port number is specified as a number. A little lower is a specialized section. The Port Forwarding menu will help you set the required numbers. Take the trouble to check the Enable box.

The third way is to set up a demilitarized zone. Creating a dedicated service helps limit the damage of a possible hacker attack. The settings are the same:

1. Connection type + port (in one line).
2. Local IP address of the PC.

Note. Sometimes translators call port forwarding redirection.

First check the functionality of the service provided externally within the network. Helps reduce setup time.

Unlock

It happens that sometimes a subscriber wants to change provider. I bought an MF823D, I was eager to switch to Iota, or I was tired of MGTS, and the F670 refuses to eat someone else’s SIM card. To change service provider, you must unlock the hardware. Megaphone MF823 calls M100-3 - the essence is the same. Unlocking is closely related to flashing issues. A provider-neutral binary image is selected.

Attention! Before installing the firmware, carefully study the forums. Some home-grown versions of the software partially break functionality. Example - H118NV2.0.1d_E04_OV DOMRU removes the web interface (via browser). Telnet access remains. I have to reflash it.

Instruction: Model MF823D

You will need a firmware image. Get it using search engines.

1. Download the PuTTY terminal emulator.
2. Install the ZTE diagnostic mode driver.
3. We turn on the equipment.
4. We feed the browser the intricate link 192.168.0.1/goform/goform_process?goformId=MODE_SWITCH&switchCmd=FACTORY.
5. The modem will send a response containing the line OK.

The hardware should go into diagnostic mode. Check by opening Windows Task Manager. The properties contain the number of the serial port; opposite the corresponding COM there should be the inscription ZTE Diagnostic Interface.

Open a PuTTY terminal, copy the image to the serial port, the number of which is shown in the task manager. All that remains is to rescue the device from diagnostic mode. Open the terminal again, set the mode parameters:

• Protocol – Serial (serial port).
• COM line number (according to the Task Manager information listed above).
• Try setting the speed to 921600.

The terminal window will be completely blank. Enter the commands one by one, pressing Enter each time:

1. AT+ZCDRUN=8
2. AT+ZCDRUN=F

Each time a device response may occur containing the number of successful and failed operations. The operation is completed. Reboot your device.

Modem ZTE MF90+

1. Install the router according to the instructions.
2. Open the admin panel through a browser (m.home, or the IP address specified by the manufacturer).
3. Setting up Wi-Fi access. Open the web interface (by entering your admin login/password). Leave one device in this position. Later it will be possible to use the graphical shell, although the PC connected by cable will no longer open the menu.
4. We feed the browser (via cable) the lines to enter diagnostic mode: m.home/goform/goform_process?goformId=MODE_SWITCH&switchCmd=FACTORY.
5. The successful completion of the operation is completed with a response (“result”:”FACTORY:ok”).
6. Device Manager now contains unidentified objects. Diagnostic mode driver required. Install the required software.
7. Once the devices are identified, the question marks will disappear. Select ZTE Mobile Broadcast Diagnostic Port. Look at the number among LPT/COM. Find out the exact name, for example, COM9.

We find the firmware image. Open any terminal (including the Windows command line). Copy the image from the directory to the serial port defined earlier. For example:

• copy/b<имя_образа>\\.\COM9

The choice of port number is illustrated earlier, the image name is known, including the location. The /b prefix means the binary mode of the transfer operation (since the firmware file is in binary format). Reboot your device.

A router is a network equipment that allows multiple devices to simultaneously access the Internet (computers, tablets, smartphones and much more). Today's range of routers allows you to choose exactly what is most suitable for a particular case.

Review of routers

There are several models that are optimal for use at home:

• Zte E5501;
• Zte H118N;
• Zte E5502;
• Zte ZXA10 f660.

ZTE E5501

This device supports many interfaces:

• 4 ports for an RJ-45 connector (which allows you to work with data via a network interface, the cable type is determined automatically);
• operates according to the 802.11n communication standard (2.4 GHz frequency);
• There are two non-removable antennas that ensure stable Wi-Fi operation.

In addition to the supported interfaces, this device has many other options that make its use quite convenient and simple.

Zte H118N



A router of this type in its design has:

• USBv.2 in the amount of 1 piece for connecting a 3G modem (optional);
• 4 ports for connecting a cable crimped with an RJ-45 connector;
• Wi-Fi (IEEE 802.11n).

The maximum data transfer rate of this device is 300 Mbit/s. Several data encryption technologies are also supported - WEP, WPA, WPA2.

ZTE 5502



The router in question from such a renowned company is in no way inferior to its classmates:

• 4 ports for cable connection via RG-45 connector;
• supported: IEEE 802.11n (maximum transmission speed – 300 Mbit/s);
• there are two antennas for operation in the 2.4 GHz band;

The encryption capabilities of the device in question are the widest:

• WEP with 64/128 bit encryption technology;
• WPA-PSK;
• WPA2-Interprise and many others.

ZteZXA 10 F660

The ZTE router not only has excellent performance characteristics, but also a relatively low price.



It is easy to set up and also supports all the necessary technologies:

• there are 4 connectors for RG-45;
• 2 connectors for working with the POTS interface (RG-11);
• works successfully with Wi-Fi technology;
• There is a connector for connecting USB devices.

Selecting a device

When choosing a router for your home, you need to consider the following important points:

• ease of setup - so that in case of any problems you can fix them without calling a specialist;
• price - this issue is especially relevant for those families with many children;
• reliability;
• features of the Wi-Fi module.

The simpler the design of the device, the easier it is to configure. That is why you should give your preference to those routers that do not require dancing with tambourines while connecting and getting started. This will save a lot of time.

Video: How to open a port on the ZTE ZXA10 F660 router

Price range is a very important point. Today there is no point in purchasing expensive devices. Since even the youngest models in the line have on board everything that is required for comfortable work with a Wi-Fi network at home. You shouldn’t overpay for a model’s brand – usually such expenses are completely unjustified.

When choosing the best price option, you should not purchase very cheap models. Since often the extremely low price does not mean the highest quality of workmanship, which can soon lead to breakdown.

The Wi-Fi module must have an antenna located outside the case. Since antennas of this type cover a large area. Which is very important if the apartment or house has a large area. Also, the antenna should be removed and replaced if necessary, as it may be necessary to expand the coverage area.

The optimal choice in all respects is the ZTE ZXA10 F660 router. It has many advantages, as well as a fairly low price (considering its pretty good parameters).

PC connection

The easiest part of setting up a ZTE router is connecting it to a PC. This operation is performed in the following order:




Manage Settings

How to set up a ZTE Wi-Fi router? Settings are managed using a WEB interface, which can be accessed through any browser installed on a PC. For example, internet explore. In the address line you should enter the following combination of numbers and symbols - http://192.168.1.1. If the router is connected to the computer according to the instructions, a window will appear in which you can enter your username and password.



The default password and login is the word admin (in Latin letters only). When the fields are filled in, click the “Login” button. Next, a window will appear, made in green and white colors.

At the top there are the following tabs:

• status;
• network;
• security;
• application;
• administration.

Each tab allows you to manage one or another section.

To set up Wi-Fi, follow these steps:




Using this list of actions, Wi-Fi is turned on.

Special attention should be paid to the section called “Multi-SSID”.

If desired, this section allows you to make the network both open and closed for various types of devices:

• SSIDName – this item allows you to name the configured network by any name;
• MaximumClients – the maximum possible number of simultaneously connected devices (this model supports 32);
• EnableSSID – enable or disable the network being changed;
• HideSSID – hiding a wireless network;
• ChooseSSID – select a changeable Wi-Fi network.



There is also a Security section where you can configure the following items:




When choosing a password, it is advisable to follow the following recommendations:

• the presence of lowercase and uppercase letters (in random order);
• The password must be at least 10 characters long;
• The presence of numbers is also desirable.

Setting up a ZTE router for providers

The ZTE ZXA10 F660 router is configured differently, depending on which Internet service provider is (MGTS, Rostelecom, Ukrtelecom).

Ukrtelecom

Setting up work with this operator requires special care, since all the nuances should be taken into account:




In the “Multi-SSIDSettings” and “Security” sections, all settings are set according to the instructions supplied with the device.

Particular attention should be paid to the “AccessControlList” section. The “Mode” item should be set to “Block”. "MACAddress" - 00:13:e0:81:97:ee.

Rostelecom

Setting up a router to work with the Rostelecom provider is not difficult.

You need to do the following:




When the above steps are completed, you should configure the “Multi-SSIDSettings” section:

• in the “ChooseSSID” item set the SSID value;
• check the box next to “EnableSSID”;
• "SSIDName" allows you to select a network name.

After completing all the settings, you must click the “Submit” button.

MGTS

To correctly configure the router model in question with the “MGTS” driver, you must perform the following steps in strict order:



This will enable Wi-Fi. The remaining settings are made in accordance with the manual supplied with the router.

It is also imperative to configure a section called Multi-SSID. This section allows you to set a personal identifier for the network, and also hide it if you wish. All settings are made individually, depending on the personal preferences of the user.

The section called “Securiry” allows you to configure encryption settings and a password for connecting to the network.

The ZTEZxa10 F660 router is the optimal device in terms of price-quality ratio. An excellent choice for home and office. This network equipment is easy to configure, compact, and reliable.