Firmware for Samsung s4 mini phone. Firmware for Samsung Galaxy S4 Mini Duos GT-I9192. Samsung Galaxy S4 Mini Duos GT-I9192 firmware process

For the current generation of people, the smartphone has become an indispensable assistant and an extremely useful device that combines hundreds of different functions. Taking a photo, counting the number of ingredients, setting reminders, checking the weather, reading the news, chatting with friends - this is not a complete list of everything that modern smartphones are capable of. Sometimes we simply forget that they do not last forever and are subject to gradual wear and tear.

Smartphones running the Android operating system have long filled the whole world with their diversity. Their software code is open and ready to be edited or improved. While using such devices, there are times when the software component malfunctions and the smartphone stops working properly. To solve the problem, a simple reset to factory settings may not be enough - you need to flash the Samsung Galaxy S4 Mini Duos GT-I9192.

Fortunately, manufacturers of mobile equipment and simply enthusiasts have found dozens of ways to change the firmware for all Android devices without exception. The process will take a few minutes and the smartphone will come to life, starting its daily work with renewed vigor. The AndroGoo website has prepared detailed instructions on how to flash the Samsung Galaxy S4 Mini Duos GT-I9192.

What do we need?

Device charged at least 50% (if possible).
Original USB cable.
latest version.
Latest firmware:

Single file:Download Android 4.2

Multi-file: Download Android 4.4

Samsung Galaxy S4 Mini Duos GT-I9192 firmware process

If Kies was installed on your computer, remove it.
Download and install for Samsung smartphones and tablets.
Download and install.
Reboot the computer.
Unpack Odin onto your desktop. In the same folder we extract the firmware files from the previously downloaded archive.

On your smartphone go to “ Settings«, « For developers"(if there is no such item, go to " About the phone" and click many times on " Build number") and turn on " USB Debugging«.

We transfer the smartphone to Download Mode. To do this, turn it off completely, hold down the buttons at the same time Home+Power+Volume down.
After the screen appears with the message Warning, confirm the choice by pressing the button Volume up.

The phone has entered download mode.

Let's launch Odin on behalf of the administrator.
In this state, connect the device to the computer using a USB cable (exclusively USB 2.0) so that flash Samsung Galaxy S4 Mini Duos GT-I9192. If in the ODIN window the field ID:COM turned blue, like in the screenshot below, everything is fine - you can continue. If not, reinstall the drivers and restart the computer.

Files that can be found in the archive with the firmware

The picture shows the names of files that may be in the archive with the firmware and indicates where to insert them in the Odin window.

If there is only one file and takes up a lot of space, insert it into the field PDA. This is the firmware.

In the appropriate fields on the right, select the firmware files, based on the example above. IMPORTANT! Only checkboxes should be checked Auto Reboot And F. Reset Time.

This is what the program window looks like ready for firmware:

Click on START and wait for the firmware process to finish. At the same time, it is strictly forbidden to disconnect the smartphone from the computer and touch the USB cable. The whole procedure will take a few minutes - the exact time depends on the power of the PC.

Once finished, the device will reboot itself. We disconnect it from the PC and start using the latest firmware.

LineageOS continues the work of CyanogenMod, making new firmware for Android available to many users. For example, 5 year old. I decided to do a similar procedure for the Samsung Galaxy S4 GT-I9192 mini dual sim (serranodsdd).

Once again I am convinced that it is better to choose one of the most popular smartphones, around which there will be a community of developers. Ideally, it is now better to choose an Android smartphone only if it comes with Android 8 Oreo (and not with the previous version updated to Android 8 Oreo) and meets the requirements of Project Treble. Such smartphones are required to boot on pure AOSP (Android Open Source Project), so alternative firmware for them is developed much faster. Plus, Project Treble helps smartphone manufacturers to separate their own additions to Android, which has a beneficial effect on the frequency of firmware updates in general (however, you still won’t get official firmware without the smartphone manufacturer).

Samsung Galaxy S4 GT-I9192 boasts the presence of official LineageOS 14.1 firmware, even if these are still nightly builds, and not firmware classified as stable.

How to install Android 7.1 Nougat (LineageOS 14.1) firmware for Samsung Galaxy S4 mini dual sim (serranodsdd)
Caution: When flashing a Samsung Galaxy S4 mini dual sim (serranodsdd) phone, something can always go wrong. Please also note that the instructions are written for S4 mini dual sim and it can only be used for this version of the smartphone.

Before flashing, be sure to back up your contacts, photo and video files, as well as documents from your smartphone.

Install Heimdall. Some Samsung devices use the "Download mode" boot method, which is very similar to "Fastboot mode" for devices with an unlocked bootloader. Heimdall (Windows, Linux, MacOS) - a tool for interacting with Samsung devices in "Download" mode. The preferred method for installing an alternative recovery environment (Custom Recovery) is through boot mode, when root access is not required.
To install Heimdall on Ubuntu 17.10, just type the following in the terminal:
sudo apt-get install heimdall-flash heimdall-flash-frontend
As an alternative to Heimdall on Windows, you can use Odin. Firmware can also be installed using the TWRP or ClockworkMod Recovery (CWM) recovery environment.

Download the TWRP recovery environment in .img format. I used twrp-3.2.1-0-serranodsdd.img.

Turn off the power of your Samsung Galaxy S4 GT-I9192 mini dual sim (serranodsdd) smartphone.

Boot the phone into "Download mode" by holding down the "Home", Volume Down and Power buttons simultaneously (release when the warning "Warning: A custom OS can cause critical problems in phone and installed applications" appears on the screen). Agree with the warning , selecting Continue (press the volume up button). A green robot should appear on the screen with the inscription "Downloading... Do not turn off target!!"

Connect the Samsung Galaxy S4 GT-I9192 to your computer using a USB cable (drivers will be needed in Windows).

On your computer, open a terminal (or command line) and go to the folder with the downloaded TWRP image.
cd ~/Downloads

Install TWRP on your phone by typing in the terminal:
heimdall flash --RECOVERY twrp-3.2.1-0-serranodsdd.img --no-reboot
where twrp-3.2.1-0-serranodsdd.img is the name of the file with the downloaded TWRP image. An indicator bar will appear on the phone showing the installation progress. If an error occurs with insufficient rights, on Ubuntu the command must be executed with sudo.
Wait for the operation to complete. If successful, you will see the following text in the terminal:
Session started.
Downloading device"s PIT file...
PIT file download successful.
Uploading RECOVERY
100%
RECOVERY upload successful
Ending session...
Releasing device interface...

After installing TWRP, disconnect the USB cable from the phone and turn off the power (I removed the battery).

Boot the phone into Recovery mode by simultaneously holding down the "Home", Volume Up and Power buttons (note that in the first case you used the Volume Down button, and in the second - the Volume Up button).

Click "Select Language", select "Russian" and click "OK".

After booting, TWRP prompts you to leave the system partition. Because returning to the old official firmware does not interest me, and their updates are not expected, then of course I did not leave the system partition by selecting “Swipe - allow changes”.

Install Android Debug Bridge (ADB) on your computer, a tool that allows you to send many commands to your phone in the terminal. For ADB to work, USB debugging must be enabled on your Android smartphone. Commands can be sent both when the phone is turned on and in Recovery mode. Root access on your smartphone is not required to use ADB.
To install Android Debug Bridge on Ubuntu, just type the following command in the terminal:
sudo apt-get install android-tools-adb

Download LineageOS firmware for serranodsdd from the official LineageOS website. I used lineage-14.1-20180126-nightly-serranodsd d-signed.zip.
Reset the firmware on your phone to the /sdcard/ folder using ADB:
adb push lineage-14.1-20180126-nightly-serranodsd d-signed.zip /
Replace the name of the .zip archive with the name of your firmware.

Download Google Apps. I used OpenGapps for ARM and Android 7.1 in the nano version (GMail, Calendar, Youtube and other applications can always be installed later from Google Play) - open_gapps-arm-7.1-nano-20180128.zip.
Drop open_gapps-arm-7.1-nano-20180128.zip on your smartphone:
adb push open_gapps-arm-7.1-nano-20180128.zip /sdcard/
Replace the name of the .zip archive with the name of your GApps.

In the recovery environment TWRP Recovery, make a backup copy. This is a recommended but not required step. I usually ignore him, although of course it’s better not to do this.

In the TWRP Recovery recovery environment, select “Wipe” -> “Custom Wipe”, check Dalvik/ART Cache, Cache, System, Data and clear them.

Return to the main menu by pressing the Back button.

Click on "Install" and select the firmware from the /sdcard/ folder. Add the GApps archive and any other additional packages. For example, you can add root using LineageOS su add-on (I did without root solely for the sake of security and the inability to use some banking applications with root).

Once the installation is complete, click "Clear cache/dalvik".

After clearing the cache, reboot your phone by clicking on "Reboot OS".

If you wish, you can install TWRP as a system application.

After the reboot, set up your phone by entering the login and password for your Google account (if you installed GApps, of course).

Profit!

If after flashing everything works, but the phone does not see the SIM card, then you need to flash a new bootloader and modem. Similarly, download ZIP archives on your phone and flash using TWRP or ClockworkMod.

Before returning to the old version of the firmware or bootloader, make sure that this procedure did not turn the smartphone into a brick for other users.

Alternative firmware for Samsung Galaxy S4 GT-I9192 mini dual sim (serranodsdd).

How to flash Samsung Galaxy S4 Mini

Brief instructions for flashing Samsung Galaxy S4 Mini GT-I9190 / GT-I9195 to new custom or official firmware using Odin, as well as installation CWM recovery and obtaining super user rights (Root) on the phone

Pre-download the website you like. firmware from the site http://samsung-updates.com/device/?id=GT-I9190, and unpack it to any convenient location on your PC.

1) Launch Odin v3.09 (if it is not available, download it from the Internet and install it, also do not forget to install the drivers for the phone on your computer, the drivers come in the accompanying program “Kies”), open the task manager and close all processes related to Kies,
2) Turn off our smartphone. We press three buttons on the switched off phone: volume down + center key + power button. A warning about the danger of the firmware will appear, click “ Volume up” to confirm your desire to perform this operation.
3) Connect the smartphone to the computer using a standard USB cable (it’s better to use USB 2.*, you can also use USB 3.0, but it doesn’t work stably yet, so it’s better not to risk it). In the program window, the window with the port number through which the phone is connected should light up in yellow.
4) In Odin, check the box next to Auto Reboot (enabled by default) and F. Reset Time, indicate the unpacked files from the firmware archive, and that’s it.
On the right side of the program, select parts of the firmware from a pre-downloaded archive
Button B.L. upload the file BOOTLOADER_*********.tar.md5
Button AP upload the file CODE_*********.tar.md5
Button C.P. upload the file MODEM_********.tar.md5
Button C.S.C. upload the file CSC_***********.tar.md5

5) Click START, the Samsung Galaxy S4 Mini GT-I9190 / GT-I9195 firmware process has begun
6) We wait for the green (or blue, depending on the program version) PASS sign above the port and after rebooting the smartphone, you can disconnect the cable.
7) We use

Instructions for installing CWM recovery on I9190 and getting root

The instructions provide a method for installing a zip file (via CWM recovery) from a memory card. You can do without a memory card, then you need to copy the zip to the built-in drive and in CWM select the installation of the zip from the built-in drive.

1. Download the installation archive to get root S4Mini_RootKit_v1.zip (1.5 MB)
2. Without unpacking the archive, place it in the root of the memory card.
3. The memory card with the installation archive must be inserted into the smartphone.
4. Download the archive with the Odin flasher to your computer – Odin_v3.09.zip (971.81 KB)
Unpack it to any convenient place.
5. Download the archive with the installation file CWM recovery version v6.0.3.7 to your computer – recovery-clockwork-6.0.3.7-serrano3gxx.tar.zip. Place the file recovery-clockwork-6.0.3.7-serrano3gxx.tar.md5 from the archive in the same folder in which Odin3 v3.09.exe is located.
6. Launch Odin using exe Odin3 v3.09.exe
7. In the program window, uncheck the “F. Reset Time"
8. Turn off your smartphone
9. Press and hold the home, power and volume down buttons until the loading screen appears.
10. Connect the USB cable to your computer and press the Volume Up button
11. On the computer in the Odin program, click on the “AP” button and select the CWM recovery installation file – “recovery-clockwork-6.0.3.7-serrano3gxx.tar.md5”, to start the firmware process, click the “Start” button. If Odin does not recognize your smartphone, install Kies. Along with it, the drivers necessary to connect the smartphone in Odin mode will be installed.
After recovery is installed, the smartphone will reboot.
12. Immediately after turning on the smartphone (vibration), go to recovery: hold down and do not release the “home” and volume up buttons. After loading the CWM recovery menu, release all buttons.
13. Select “install zip” -> “choose zip from extSdCard” -> select the file S4Mini_RootKit_v1.zip -> “YES – Install S4Mini_RootKit_v1.zip”, wait for the operation to complete.
14. Use the power button to return to the main CWM menu and select “reboot system now” to reboot.
If recovery offers “disable flash stock recovery”, agree.
Upon completion, Android will boot with available root.

A couple of useful things for Samsung Galaxy S4 Mini GT-I9190 / GT-I9195

Functions of the buttons in the CWM recovery menu:
– volume buttons perform navigation functions;
– “home” – select an item;
– power button – back.

How to enter recovery?– with your smartphone turned off, hold down and do not release the home, volume up and power buttons. After vibration, the power button can be released. After loading the recovery menu, release all buttons.

After installation, CWM recovery is launched using the same button combination.

KitKat brings general performance improvements, as well as an improved UI design with white icons in the status bar, enhanced Emojis, full-screen display of music album art on the lock screen, and more. With the new update, the device will also support wireless printing.

Developer: Samsung
Interface language: Russian English
Input languages: Russian English Ukrainian
Release date: 2014
Compatibility: Samsung GT-I9192
Version: I9192XXUCNG2 4.4.2

Please note that these instructions are mostly intended for more experienced users. Therefore, beginners can also take risks, but you will still be responsible for the consequences yourself. Moreover, under no circumstances should these instructions be used with other Galaxy S4 mini models, of which there are quite a few on the market.

2. Download and Install the SAMSUNG_USB_Driver_for_Mobile_Phones_v1.5.9.0.exe driver as Administrator, then restart the computer.
(Attention: If the divers are not installed (this happens, the problem comes out when performing step 4), then you will have to:

3. Download and install the latest version of KIES (or) as Administrator, then restart the computer. (The Kies program can be uninstalled after the firmware is finished))

4. Charge your phone battery to at least 75%, preferably 100%. Connect the phone with a cable to the computer (to the port on the BB system board, these ports are mainly located on the back, next to the network card connector), wait for the drivers to be installed and disconnect the phone from the computer. I advise (not necessarily, but just in case) to enable USB debugging - “Settings” > “Options” > “About device” and tap on the build version many times, the developer options will open, check “USB debugging” there.

5. Disable antivirus on your computer.

6. Close, if installed, Kies on the computer (if open) and from the task manager end processes named Kies...

7. Unpack Odin_v3.07.zip and the firmware file (preferably in a separate directory, some recommend in the root of the disk).

8. Run as Administrator from the prepared directory Odin3 v3.07.exe

9. Press:
a) if sewn with Odin_3.07 - PDA button, or
b) if sewn with Odin_3.09, then the AP button;
Then find it in the window that opens and select the firmware file. Check the “Autoreboot” checkbox (usually when you start Odin, this checkbox is already checked, then you just don’t need to touch it).

10. Switch the phone to firmware mode: with the phone turned off, press and hold the Vol.Down (Volume down) + Home (center button) + Power (on/off button) buttons and release them immediately after vibration and the phone starts turning on. Wait for the yellow warning triangle.

11. Confirm the transition to the firmware mode (Odin mode) with the Vol.Up button. A green robot will appear and the words “Downloading” and “Do not turn ....”

12. Connect the phone with a cable to the computer (preferably to the same port on the BB system board from which the drivers were installed in step 4. Let me remind you that these ports are mainly located at the back, next to the network card connector) and, if necessary, wait for a new one installing drivers on your computer (this happens, so don’t rush).

13. In the upper left part of the One program, a small blue window will light up indicating the COM port number. The same number (COM port number) will appear in the window at the bottom left. This means that the drivers have been installed correctly and everything is ready for flashing. Click Start.

14. After pressing Start, on the phone under the green robot and the inscription “Downloading” there will be a blue download bar, and on the computer in Odin in the upper left window the words BOOT, RECOVERY, SYSTEM, MODEM, CACHE, HIDDEN and eventually RESET will appear on a white background on a blue background. The phone will reboot and installation of the firmware on the phone will continue. Without touching anything, without disconnecting the body from the computer, you need to wait for the firmware to finish and the green window with the inscription PASS.

15. Disconnect the cable (the message “Removed!” will appear in the window at the bottom left) and press Exit on Odin.

16. Here, on the advice of some experts, the body can (but not necessarily) be overloaded by holding Power (on/off button) for a long time.
And you have new firmware.

Everything is ready :) As a result, ALL actions from 1 to the last point should take no more than 25-30 minutes, including rebooting the BB after installation.

Instructions for installing the official single-file firmware on the Samsung Galaxy S4 Mini (GT-I919x).

Drivers and programs

Attention!

To install the official stock firmware on the Galaxy S4 Mini and return the phone status (Settings > About device > Properties > Device status) to “Official” after switching from custom firmware and thereby returning the ability to receive updates over the air Just follow the instructions provided.

Installation instructions

Unpack the downloaded archive into a folder with Odin PC for convenience. The file in the ".tar" or ".tar.md5" format must be left, but the "SS_DL.dll" can be deleted.

Reset your device.
To do this, go to the settings tab " Accounts" to the section " Archive and reset", select the item " Reset device" and press the button " Delete everything" The phone will reboot.

Run Odin PC as administrator.

Put your device into download mode ( Download Mode).
To do this, you need to simultaneously hold down the Volume Down key, the Home button and the Power button. Then wait until the phone reboots and agree to the warning by pressing the Volume Up key.

In this state, connect the smartphone to the computer. In Odin the message “ COM».

Click on the button " AP» and select the firmware TAR archive.

Items " Auto Reboot" And " F.Reset Time" must be activated, A " Re-Partition"if active - must be disabled.

Click on the button " Start" The firmware installation process will begin.

At the end of the operation, if everything was successful, the message “All threads completed. (succeed 1 / failed 0)". The phone must be restarted manually by holding down the power button until the screen turns off. It may take up to 5 minutes for your device to boot up initially.
ATTENTION!
If the device does not boot for a long time or the data has not been reset, it must be performed from recovery.
To do this, you need to simultaneously hold down the Volume Up key, the Home button and the Power button. After downloading, select " Wipe data/Factory reset", and then - " Reboot system now" If after these steps the device also freezes when loading, you need to reflash it again.