Program for removing Windows 7 password. An easy way to reset an account password for any version of Windows

Our forgetfulness often plays various unpleasant jokes on us. Forgetting a password for a program or for Windows is a completely common thing and happens to literally every second user. Especially with those of them who write down passwords not in a notebook, but on pieces of paper scattered everywhere, or even rely on their powerful and bottomless memory. And who is not familiar with the situation when the password for an account on a network resource is forgotten - on some Facebook or Vkontakte.

Imagine that in this situation, valuable data or simply the carefully organized software environment of the Windows operating system is at risk. Who wants to reinstall Windows and reinstall all the programs? There are no such individuals in nature. The solution, in this case, is . We will talk specifically about Windows 7, since approximately the same password reset procedures are valid for the G8. And these, whatever you say, are the most popular operating systems installed on the computers of hundreds of millions of users.

To begin with, we will discuss the simplest reset procedure, which uses a bootable Windows image on a CD (like the common “LiveCD”) or a bootable flash drive with similar functionality. We also need a minimal understanding of the command line. Using these tools we will try to remove the existing administrator password. In conclusion, we will offer for consideration some other options for user action in the event of a forgotten password.

At the preparation stage

Preparing to reset your password in Windows 7 will involve one tricky procedure: we will replace the system's Sticky Keys program with the command processor.

The command processor - the cmd.exe file - is precisely the system utility that is responsible for providing the command line interface. To launch the console, you need to run this file. By replacing the sticky utility with the Windows 7 command console, we can manage the process of manipulating input and changing the password.

Please note that we will need a proprietary installer of the “seven”, which includes administrator functions, such as “System Restore”. Some stripped-down versions of installation disks and flash drives do not contain administrator functionality. So, let's begin our preparatory steps for the reset:

copy c:\windows\system32\sethc.exe c:\

Thus, we copy the keystroke handler to the root of the “C:” drive, that is, we create a backup copy of the handler, which we need to remove and replace with the cmd.exe file. We do the replacement according to the command:

copy c:\windows\system32\cmd.exe c:\windows\system32\sethc.exe

That's all the system administrator's preparations for resetting the password on Windows 7. The reset itself will be described in the next section.

We are struggling with authentication in the system

To remove authentication from the system, proceed as follows:

We remove the bootable media from the system and log in through the normal Windows boot procedure.
When logging in, we will be asked to enter the password of the administrator or other registered user of the system.
Instead, press the Shift key five times. This will launch the command processor, which will allow us to remove the forgotten password. In order to reset it and remove all information about previous authentication, type the following command:

net user Username New password

As you can see, it also allows you to remove the old username and assign a new one to it.

Everything is ready, you can log in with new credentials.

This seems to be the easiest way to reset your credentials using the console. All that remains is to “plant” the file sethc.exe that we moved in its place. Copy it back to the C:\Windows\System32 folder. There are alternatives to this procedure, which can be found here: http://www.3dnews.ru/623507.

How many times have you forgotten your passwords for a coded door at a friend’s entrance, your e-mail or an account on some VKontakte? But if in this case recovery services could help you, then in the event you forget your password from your computer, only specialists will help you... If your hands are “growing from the right place,” then you can try to do something yourself. The easiest way out of this situation is to reset the Windows 7 administrator password.

Options

There are several ways to solve this problem. Today we will talk about resetting the administrator password, which can be done with direct access to the computer, so these tips will not be useful to you for hacking someone else’s PC or server.

Mechanical.
Using the created software.
Using the operating system distribution.

Any of these options is equally good and bad at the same time. Some of them are larger and better suited for laptops, while others are ideal for a desktop computer. In addition, passwords are different, so if you protected your computer with a password using BIOS, even now it is not completely safe and there are ways to overcome this protection of a stationary personal computer. However, this method will not help you in the case of a laptop, because simply disassembling and putting it back together in working order is a very difficult task, not to mention making any changes.

Via BIOS

To immediately dot all the i's, it is worth saying that resetting the Windows 7 administrator password through the BIOS is not possible. Some concepts should be separated. You will not be able to reset the passwords on the user account by any operations in the BIOS, but if you have completely denied access to the computer using the I/O system and have forgotten the password, then here are a couple of tips for you.

It should be immediately noted that these methods are quite dangerous for your computer and work with 100% reliability only on stationary PCs. Yes, and these tricks can only be done with direct access to the system unit.

So, a quick reset of the Windows 7 administrator password is carried out as follows. Unscrew the cover of the PC system unit, having first disconnected it from the power supply, and find a coin-cell battery on the motherboard. You should remove it for a few seconds and then put it back in place. This way, you will reset all temporary BIOS settings on your computer, including the password.

Second method

Also, resetting the Windows 7 administrator password set in the BIOS can be done a little differently. You will need the instructions from your motherboard. In the diagram you need to find a special jumper, with which you can reset the BIOS settings. The jumper looks like a pair of exposed contacts. In order to reset the password, you will have to change the jumper on the jumper and turn on the computer. It will not start, but all settings will be set to default. Remove the jumper and turn on the PC again. When you first boot, you will be thrown into the BIOS control panel. Don't touch anything, just press the exit button and save your existing settings.

With disk

It is worth noting that if you have set a password for the user, then simply removing the battery is not enough. If you still have the operating system distribution, then you can use the following couple of tricks to reset the Windows 7 local administrator password.

So, first, remember the process of installing your OS. If you did it yourself, then at some point you should have been asked if you wanted to set a password for the “admin panel”. This entry is usually inactive and hidden from prying eyes, and users work on an account with extended rights. If you lose your account password, the administrator can always delete it himself. But what kind of “administrator” can we talk about on a home computer? Therefore, you have to use the system administrator user account, which is installed on the system by default.

To launch it, do the following. Insert the installation disk and on the first welcome screen press the combination “Shift+F10”. This will allow us to bring up the command line. Next, we need to launch the registry editor with the “regedit” command. After this, we perform the following manipulations in the editor.

Select HKEY_LOCAL_MACHINE and click "File" - "Load hive".
Find the SAM file in the Windows folder - Swstem32 - config.
In the new branch that appears, go to the folder 000001F4. It is located in SAM - Domains - Account - Users. The "F" parameter needs to be changed.
Double click on it. We are interested in line 0038. In it we need to change the number located in the very first column. "11" -> "10".
We exit and save.
Select the root folder of our branch and click the “File” menu button, then “Unload hive”.

After all the manipulations have been completed, you can restart the computer. Now you can log into your administrator account and reset your Windows 7 administrator password manually using operating system tools.

Another variant

There are still ways to log into a password-protected account. The fact is that you can reset the Windows 7 administrator password directly from the console running as an administrator. Now you will be offered a rather complicated method, but one that allows you to leave a small loophole for the future.

Perhaps you have come across a program that is responsible for sticky keys? When you press "Shift" or "Alt" many times in a row, you will receive a message asking you to turn off sticky. The fact is that this function also works in the user selection menu when we just turned on the computer. So if we replace it with something useful, we could benefit from it. For example, calling the command line.

To do this, repeat the steps in the previous paragraph and enter the operating system installation menu. Launch the command line. By default, your operating system should be installed on volume "C:\". If not, just replace it with the desired letter. After launching the line, enter a sequence of commands.

"Copy C:\windows\system32\sethc.exe C:\" - a copy of the file with the code that reacts to sticking is created.
"Copy C:\windows\system32\cmd.exe C:\windows\system32\sethc.exe" - copy the contents of the file that launches the command line to the sticky file.

After entering the last command, you must restart your personal computer (laptop). In the user selection menu, when you are asked to enter a password, we activate the sticky function by quickly pressing a few keys. The command line will open, and enter the command “net user UserName NewPassword”. As you might guess, instead of UserName you need to specify your user name, and instead of the second parameter, a new password. After this, you will be able to log into your account on your personal computer. If you want to return everything to its place, you can turn on the command line from Windows and enter “copy C:\sethc.exe C:\windows\system32\sethc.exe”.

But how to reset the Windows 7 administrator password without a disk?

Utility

If the operating system distribution kit is missing, it is always possible to reset the password using a special utility. You will need a program to reset the Windows 7 administrator password. For example, Offline NT Password and Registry Editor. We write it to a disk or flash drive and restart the computer, choosing to boot from external media. Resetting the Windows 7 administrator password from a flash drive is quite easy to learn if you can read and know English. So let's begin.

After launch, a table with hard disks will appear in front of you. Enter the number of the one on which the OS is installed.
Determine the path to the SAM accounts file. "C:/Windows/System32/config".
Enter "1" twice in a row.
We select the user we need in the table. The administrator password reset program only works with Latin, so if the name is not displayed correctly, you can enter its RID in the format 0xRID.
Once again enter "1".
The following is a sequence of commands: exit, save changes, do not continue working.
Reboot the computer by pressing "control-alt-divide".

The Windows 7 administrator password reset program did its job. You can enter your "domain" on the computer.

Warning

Finally, it should be noted that any changes that you make to your computer when trying to reset the Windows 7 administrator password, you do at your own discretion, and all responsibility falls on your shoulders. After them, most likely, no service will accept your computer under warranty. especially after opening the cover of the system unit. After all, it is very difficult to prove that you did something with the operating system, but the opened “seals” on the system unit will look very eloquent. This means you will have to pay specialists a round sum for quite simple actions. When following these instructions, be extremely careful, and if something is not clear, it is better to clarify or look for additional information.

Bottom line

We hope this article helped you with your problem, no matter which method you used, be it a remote battery or a super-sophisticated utility from an unknown manufacturer. The main problem you may encounter is data security. Unfortunately, some information may well be lost during this process. Therefore, try to get it from friends or download a version of the operating system on LiveCD. Then you can simply save all the data that is important to you.

In this article, we did not consider the simplest but longest method - a complete reinstallation of the system. Unfortunately, sometimes there are situations in which it becomes completely impossible to access your computer, and reinstalling Windows becomes the only possible option.

In Windows 8, 7 and 10, you can protect your account. This way no stranger will enter there. But what if you forgot your password? Or did you purchase a computer that already has an account? In Win, you cannot recover your account using email. The code will not be sent via SMS. But there is no need to format the disk. Resetting Windows 7 password via USB flash drive is the solution to the problem.

If you forgot your Windows password, no problem.

The UltraISO program is suitable for this. You can use another utility if you wish.
Find it online and download it. The application is paid. But there is a trial version.
Insert the drive.
Launch the program.
"File - Open". Select ISO file.
Go to the “Boot” menu and click on “Burn Hard Disk Image”.
In the "DiskDrive" section, select USB storage device.
Next, you can format it if you haven’t done so before. The flash drive must be in
"FAT32".
Click on “Record”. The system will warn you that all data from the drive will be deleted. Confirm the action.
Wait while the files are copied.

Replacing files

To remove a Windows 10, 8 or 7 password, enter recovery mode, and through it, enter the command line.

In BIOS, set the external drive as boot priority.
Once launched, the installation wizard will open.
Choose language.
Click on "System Restore". Do not click on "Install".
A list of OSes will appear. Mark the one for which you cannot remember the code.
In recovery options, click on “Command Prompt”. Now you see white font on a black background.
Create a backup copy of “Utilman.exe” - enter “copy [System drive]:\Windows\system32\sethc.exe [System drive]:\File”. The file will be copied to the "File" folder.
Now replace it with “copy [System-drive]:\Windows\System32\cmd.exe [System-drive]:\Windows\System32\Utilman.exe”.
The system will ask you to confirm the action. Write "Y" if you agree.
Once the file has copied, click Reboot and remove the drive.
In BIOS, return to the previous settings. Now you can start the OS.

Reset

When you log into your account, open “Accessibility” (the button at the bottom left).
But the command line will start.
To reset your Windows password, enter “net user [Username] [New Code].” If there is a space in the name or cipher, enclose it in quotation marks.
If you want to remove the code, put two quotes without any characters between them.
Restart your computer again and calmly log into your account.
Return the "Utilman.exe" file. Boot from the flash drive again, open recovery mode and command prompt. Write in it “move [System drive]:\File\Utilman.exe [System drive]:\Windows\System32\Utilman.exe”

If you cannot log into your Win account, this does not mean that you have lost all user data. In Windows XP, 7, 8, 10, resetting a password from a flash drive is a very simple task. Although this has its downsides. It turns out that anyone can log into the account. Protect your personal information in several ways - not just with the code in your account.

The computer is a work tool for many users, and losing access to it is a big problem. To secure data on a computer, users set a password on it, which must be entered to log into their account. But you cannot be completely sure that this password will not be forgotten, and Microsoft has provided special tools in the Windows operating system for users who are afraid of losing access to the system due to their forgetfulness. Computer administrators have the opportunity to create a Windows password reset flash drive, which will allow identification without knowing the password.

Windows password reset flash drive: why you need it and how to use it

The ability to create a special data store that allows you to reset a password appeared in Windows a long time ago. In older versions, the operating system allowed you to create a backup floppy disk, then it became possible to write a password reset tool to disk, and in modern versions of Windows a flash drive is used for this.

Using a flash drive to reset your Windows password is quite simple. To do this you need:

After these simple steps, your forgotten password will be reset and a new password will be set on the selected account. As you can see, a password reset flash drive is a useful tool, and you should have one if you store important data on your computer that you don’t want to lose access to due to a forgotten password.

Most often, system administrators of various companies whose data is stored on separate servers resort to creating a password reset disk. In this way, they are able to protect themselves from serious consequences if they lose their password.

The Windows password reset tool itself is a small file of several kilobytes, recorded on a flash drive. However, it should not be empty, and other data can be stored on it. When you reset the password, the Windows operating system will automatically find the required file on the flash drive and read the data from it.

To create a USB flash drive to reset your password, you need to do the following:

Attention: On the Windows 10 operating system, this menu item may not be available. In this case, you need to click on the search button and enter the query: Creating a floppy disk to reset the password, and then select the appropriate result.

Please note that this userkey.psw file can be copied and transferred to another storage device by the user. We recommend uploading it to cloud storage so as not to lose it and use it if necessary. It should be noted that if you change the password on your computer, this recovery file will not work. It will also stop working if you repeat the procedure for creating a flash drive to reset your Windows password.

Good afternoon Today I will tell you how to make a USB flash drive to reset your password. It's no secret that your Windows login password can be easily forgotten or lost. What to do in such a situation? It is precisely for such cases that you need a flash drive to reset your Windows password. Below we will look at two options for creating such a USB flash drive, the first is simple, the second is more complex, but more effective than the first.

First way. Creating a flash drive for password reset using Windows OS tools.
I will say right away that this method has some disadvantages. It will work if you create a flash drive in advance, that is, in advance. I also want to note that this method involves resetting the local account password. This means that if you use a Microsoft account, then you can safely skip the first method and go to the second.

So let's get over it. This method is suitable for Windows 7, 8 and 10.
Let's go to Control Panel - User Accounts,

On the left we find the item “Create a password reset disk” and click on it. If you are using a non-local account, then this item will not be available.

The Forgotten Password Wizard will open. Now just follow what is written and in literally three steps the flash drive will be ready. At the end of the operation, a special file called userkey.psw will be written to your flash drive, which will help you reset your operating system password.

Now there's just a little bit left to do. All you have to do is plug the flash drive into your computer and enter the wrong password when logging into Windows (since you don’t know it, it won’t be correct). In this field, a password reset button will appear at the bottom, clicking on which will open the password recovery wizard, just follow the instructions. In principle, nothing complicated.

Second way. Using the Online NT Password & Registry Editor tool
I can say that this is quite a powerful tool for resetting passwords and more. I used this utility for a long time, and even now it has not lost its relevance. The main thing is to update on time.

The free Online NT Password & Registry Editor can reset local account passwords for Windows 2000, Me, XP, Vista, 7, 8, 8.1 and 10. The image of this utility can be easily written to either a disk or a flash drive. Moreover, if you use a Microsoft account, then using Online NT Password & Registry Editor you can bypass the protection and gain full access to your PC.

Let's look at how to create a bootable USB flash drive to reset system passwords. Let's go to the official website of the developer Online NT Password & Registry Editor http://pogostick.net/~pnh/ntpasswd/bootdisk.html, then go down until we see the Download section. We are interested in the latest release for USB, and we will need to download it. You can burn an ISO image for CDs.

We have downloaded the archive, now let’s unzip its contents onto a flash drive. The flash drive should preferably be empty. If it is bootable, then format it. I already wrote.
Next, launch the command line (Start - enter cmd in the search) and enter the command f:syslinux.exe -ma f:
Where f is the letter of the flash drive. You can find out the letter of your flash drive by going to “Computer”. If you get an error, enter the same command only without the –ma parameter.

If suddenly this method does not work, then you can download the Online NT Password & Registry Editor image for disk using the WinSetupFromUSB program and write it to a USB flash drive. I wrote about how to use this program.

So our flash drive is ready, so we can start. Connect the USB drive to the computer. Now we need to boot from the flash drive; to do this, when you turn on the computer, call up the Boot menu and select the required drive. Or you can set the BIOS to boot from a flash drive.

The initial screen will appear and you will be prompted to select options. As practice shows, you can simply press the Enter button. However, there are situations that make it necessary to use one of the listed commands.

Next we see a list of partitions on which Windows is installed. At this stage, you need to indicate the number of such a section. There are also various options here, but the average user may not need to use them.

Afterwards, select the user data and passwords option again. This is the section for editing user data and password,

Next, the program will display a list of users, where you can see who is the admin and who is just a guest. You can also see whether a particular user is blocked. Please note that on the left side of the list there is a RID column, which is unique to each user. You need to select the desired user by entering their RID and pressing Enter,