Why a hard drive diagnostic program? Hard drive error: causes, checking and correcting errors and bad sectors

Many PC users hardly think about checking the status of their HDD. Checking the hard drive is, first of all, necessary for early detection of errors in it.
If you manage to identify problems with your hard drive in advance, you will be able to save all the important information stored on it until it finally fails.
In this material, we will describe, using specific examples, the procedure for checking the status of the HDD, and also tell you what to do in a situation if your hard drive is faulty.

How to check the status of your hard drive

You can check the status of your hard drive using various utilities that read the status of your hard drive from its self-diagnosis system SMART. SMART technology is now installed on every hard drive produced. SMART technology was developed back in 1992 and is still being improved to this day. The main goal of SMART is logging the hard drive aging process. That is, information such as the number of HDD starts, the number of spindle rotations and many others is collected. More SMART watches for errors"screw", both software and mechanical and, to the extent possible corrects them. During the monitoring process, SMART performs various short and long tests to identify those same faults. In this material we will look at such programs that can read information from SMART:

Ashampoo HDD Control 3;
Defraggler;
HDDlife;
Victoria.

Each program on the list, in addition to reading SMART readings, offers a number of functions and tests that, to one degree or another, extend the life of the hard drive. But the most interesting is the program Victoria. The Victoria program, in addition to determining the HDD state, can also produce REMAP of bad sectors. That is, she can hide bad sectors by replacing them with spare ones, if available. Essentially, the REMAP procedure can completely restore the hard drive. It is also worth noting the possibility of fixing the hard drive thanks to the console application “ chkdsk" The console program "chkdsk" can fix file system errors, which will allow you to avoid reinstalling Windows.

Ashampoo HDD Control 3

First we will look at the program Ashampoo HDD Control 3. Let's run this utility on a computer running Windows 10.

The Ashampoo HDD Control 3 window displays the message “ ✓ OK", as well as the inscription " This hard drive has no problems" This information means that the hard drive in question is in perfect order. If when opening the program you see the message “ Error", as well as the inscription " This hard drive has a problem", this means that it has bad sectors or is overheating. To view complete information about the health of the “screw” taken from the smart, you need to click on the footnote “” located in the central block.

In addition to viewing information from the smart device, Ashampoo HDD Control 3 can launch self test S.M.A.R.T. And surface inspection test. You can test these tests in the "" block.

By performing these tests, you can also identify problems with the HDD. In addition to taking readings from smart devices and tests, Ashampoo HDD Control 3 can:

Perform defragmentation;
Clean the system of debris;
Find and delete duplicate files;
Securely erase files from the HDD, without the possibility of recovery.

The presence of such functionality of Ashampoo HDD Control 3 in monitoring the health of the drive and additional functions puts the utility in first place.

Defraggler

Utility Defraggler primarily intended for defragmentation, but besides this she can read SMART readings. The utility is free and any user can download it from the website www.piriform.com. After launching the utility, you need to go to the “ State».

In the window you can see that the utility displays a message about the status of the screw, like “ GOOD- this means that he is completely fine. If you see the message " Error" in status, this will mean that the hard drive has bad sectors and it’s time to change it. The utility is quite simple and is suitable primarily for novice PC users who want to monitor the health of the HDD and defragment it. I would also like to note that the utility supports all current operating systems, from Windows XP to Windows 10.

How to check your hard drive using HDDlife

Utility HDDlife It has a nice interface and immediately provides the information we need, which is responsible for the serviceability and breakdown of the screw.

From the image above you can see that in the health block there is " OK!", which means that everything is fine with the HDD. To view smart details, you just need to click on the link “ click to view S.M.A.R.T. attributes».

If you see a message in the health block " DANGER!", this means that your HDD will soon become unusable.

In this case, you need to replace the old hard drive with a new one. The HDDlife utility is, first of all, suitable for novice PC users, since its simplicity will make it easy to monitor the health of the “screw”. In addition to the standard utility, the developer also releases HDDlife for Notebooks, which is designed for laptops. The laptop version has the same functionality as the standard version, but can also perform HDD noise level control. It is also worth noting that the program supports all current operating systems, from Windows XP to Windows 10.

Victoria

Program Victoria is being developed in a version for DOS and by Windows. For our example, we will use the Windows version of Victoria, which can be downloaded from http://hdd-911.com. Victoria is currently available in version 4.47. By launching the Victoria utility, we will be taken to such a window.

Victoria does not have a beautiful interface, as in previous utilities and is written in such old languages as Delphi And Assembler.

In the first tab of the quiz " Standard"is all information about installed hard drives to the computer.

Second tab " SMART» needed for smart reading. To display smart results, you must click the Get SMART button, after which the results will be displayed.

In the hard drive in question, Victoria discovered 1212 bad sectors. This number of BAD sectors is critical, so in this case it is necessary to full backup all data from the HDD. To repair a hard drive using the REMAP test in Victoria, you need to go to the “ Tests" and select the mode " Remap" After these steps, you can begin the procedure of reassigning bad sectors to backup ones with the Start button.

The REMAP test in Victoria can take a very long time. The test time depends on the number of BAD sectors. This test of the Victoria utility does not always help, since there may not be any spare sectors left in the screw.

Please note that using Victoria tests, you can damage the serviceability of the HDD and the information on it.

How to check if a disk is healthy using “chkdsk”

It may happen that by checking the S.M.A.R.T. values. Using the utilities described above, you did not find any problems, but the system still behaves unstable. Instability can manifest itself as blue screens of death and freezes in programs. This behavior of the Windows operating system is caused by file system errors. In this case, the console command “ chkdsk" By running the "chkdsk" command, you can fully restore functionality Windows OS. For this example, we will take a computer with the new Windows 10 operating system. First of all, we will open the console in Windows 10 as an administrator. This can be easily done by right-clicking on the “ Start» and selecting the item we need.

In the running console, execute the following command CHKDSK F: /F /R After checking using the command application “chkdsk”, the result of the check will be displayed in the console.

Now let's look at the command " CHKDSK F: /F /R» more details. Immediately after the command “chkdsk” comes the letter “ F" - this letter local disk, where we correct errors. Keys " /F" And " /R» fix errors in the file system, and fix bad sectors. These keys are almost always used, unlike the others. You can view the remaining keys with the command chkdsk /?

It is also worth noting that in Windows 10 the capabilities of the chkdsk application have been significantly expanded thanks to new keys.

How to check your hard drive's health using DST

Abbreviation DST deciphered Disk Self Test, that is self test disk. Manufacturers specifically integrate this method into the HDD, so that later, using special software, they can perform DST self-diagnosis, which will identify problems. By testing the “screw” using DST you can get information about possible hard drive failure. It is especially convenient to use DST on servers and computers of enterprises, where reliable storage of information plays an important role. Now let's look at using DST using HP laptops as an example. For new HP laptops with support UEFI BIOS There is a special diagnostic menu " Startup Menu" This menu is launched using combination of power key and key ESC.

To run system tests, press the F2 button.

In the window that appears, DST is called Hard Disk Test. After selecting it, a self-test will start.

Other manufacturers also have a DST method, only the launch on a PC from other manufacturers differs from that discussed above.

Checking your hard drive in Linux

For example, let's take a computer based on the Ubuntu 16.04 operating system. To do this, let's launch a terminal in Ubuntu. In the terminal, type the following command: sudo apt-get install smartmontools This command should install console utility Smartmontools.

Now that the Smartmontools utility is installed, you can use the command sudo smartctl -a /dev/sda which will display all the information of the smart hard drive in the console.

If you don't like working in console mode, you can install a graphical utility Gnome-disk-utility. In it you can see everything you need about the HDD and its condition.

Let's sum it up

In this article, we described how you can monitor the status of the HDD, as well as how to fix its sectors and file system, if possible. From the material it becomes clear that monitoring the status of hard drives is very important, as it allows anticipate HDD failure.

If you have discovered that your hard drive is problematic, then do not put off replacing it until later. The problematic “screw” can fail at any moment, and you will lose all the information stored on the computer.

We hope our material will be useful to our readers and will completely help solve the problem of checking a hard drive.

Video on the topic

Hello, friends! In this article we will understand the topic - Hard Drive Diagnostics. The reason for writing this article was a message from relatives - our operating system has been installed for a maximum of two months, after which glitches begin and we have to reinstall it. Even after I installed Windows 7 for them, complaints began. I had no doubt about the operating system. It was already installed on more than 10 computers. I tested the RAM, replaced the thermal paste on the processor, cleaned the system of dust - nothing. Then I tested the entire system using the system stability test (functions of the AIDA64 program). Everything is okay.

After repeated successful testing, enlightenment came. Checking the hard drive completely slipped my mind. I first diagnosed the HDD with a third-party program called HDD Regenerator. Having discovered errors (8 unreadable sectors), I ran the check again using a program from the manufacturer Western Digital. The latter confirmed the malfunction and the hard drive was sent to a service center under warranty. Read on to learn how to diagnose your hard drive...

Diagnostics using the operating system is what can and should be used first. To do this, open the main Start menu and select Computer. Right-click on the section to bring up the context menu and select Properties

Disk Properties opens. Go to the tab Service and in the section Checking for errors press the button Check

This will be Data Lifeguard Diagnostic for Windows.

The WinDlg_v1_28.zip archive will be downloaded, which can be opened using the 7-zip or WinRar program in the same way as a file with the rar extension. Unpack and run the Setup.exe file.

When finished, click Ready

Launch the SeaTools program again

Searches for supported drives. Need to wait a little

Then, accept the license agreement again

To diagnose a hard drive, the Short and Long universal tests are sufficient

To be safe, choose Long lasting universal and wait for it to finish. If the test does not pass, follow the instructions and if the program does not fix the disk, bring it under warranty.

In the Basic tests menu there is an item called Repair all. I have not tried this function. I’ll try as soon as I get a suitable hard drive.

Restoring the Seagate HDD

10_21_2013 A few months ago, bring a 160 GB Seagate hard drive without warranty. A long-term universal test produced an error. When connecting to another computer, I was able to copy all the important information from this disk without any problems.

To restore functionality we used Additional tests

A warning window opened saying that you can activate Additional tests using the key F8

By clicking on F8, the window closed and the Additional tests section appeared. Since our data was saved, I chose Full erase (SATA)

Another warning popped up

Scrolling the screen in this message with the slider, it was discovered that to start a complete erase, you need to press F8. After pressing, erasing started.

When the process was completed, I ran the Long-Term Universal Test again. The test was passed. After that, we reinstalled the production system image using Norton Ghost. And until this moment no one complained.

Conclusion

In the article hard drive diagnostics you learned how to check your hard drive (HDD) for errors. Here we looked at two methods: checking with built-in Windows tools and checking with special utilities from manufacturers. In a combat situation, I like to use diagnostic utilities. Since this, for me, is 100% an option. If the disk passes the test, everything is fine. Otherwise, we will take it for repair under warranty. This is why in the article on choosing a hard drive I attach such importance to the warranty. It is necessary that she be 3 years old. This is a whole 3 years without a headache. Naturally, it is necessary to treat the hard drive well during the entire warranty period, since the service center pays close attention to scratches.

The main thing I want to convey to you is. Hard drives are consumables. Like printer cartridges. You need to have at least two copies of your important data on two different drives. For example, on an internal and external hard drive. One fails, buy a new one, restore the data from the backup one and you are happy again. In order not to buy often, look at the same guarantee. I wish it was longer. Another great option is to use Windows 7 archiving.

I have not encountered any problems with Samsung hard drives. I couldn't find any utilities specifically for these disks. If anyone has information, please share in the comments. For now I will check them with a utility from Seagate or WD.

In this article you will find a guide to using chkdsk, links to programs that allow you to comprehensively test your hard drive, as well as instructions for them. In addition, the article describes how to scan your hard drive partitions using built-in Windows tools.

Windows Check Disk Utility (chkdsk)

Windows OS has its own disk checking utility. It can be launched from the GUI or from the command line.

Running disk check from the GUI

Open the window My computer, right-click on the disk or partition you want to scan and select from the context menu Properties. In the disk properties window, go to the tab Service and press the button Run check.

In the next window, click the button Launch.

The scan of the non-system partition will begin immediately. If you are checking system partition Windows 7, you may see a message saying that it cannot be completed at this time.

This is normal because the system partition is being used by the operating system. Click the button Disk check schedule. To run the scan, you must restart your computer. After the computer restarts, the disk check will be performed before the operating system starts.

Run disk check from the command line

Below is an example of running a partition check C from the command line.

Chkdsk c: /f /r

Note. The command line must be run with administrator rights.

In Windows 7, as in the case of checking the system partition from the GUI, after executing this command you will see a message stating that the scan cannot be completed.

Enter Y and restart your computer to start checking.

Additional information about the utility's command line parameters chkdsk you can get it by running it with the key /? , or on this page.

Run a disk check if the system won't boot

If the operating system does not boot due to errors on the disk, you can check the disk using the Windows installation disk.

Windows 7, 8.1, 10

Boot into the recovery environment and open a command prompt (instructions for Windows 8 and later, Windows 7)
At the command prompt, enter chkdsk c: /r

Windows XP

If the problem occurs in Windows XP, use the Recovery Console. After booting from the installation disk into the console, run the command

Chkdsk c: /r

For more information about the Recovery Console, see the following Microsoft Knowledge Base articles:

Installing and using the Recovery Console in Windows XP
Enable automatic administrator login when using the Recovery Console

Hard drive diagnostics using third-party programs

If after checking the hard drive with the utility chkdsk If you continue to experience critical errors related to your equipment, it is worth carrying out more thorough testing using specialized programs. As a rule, hard drive manufacturers' utilities or programs such as Victoria or MHDD.

Attention! Before testing your hard drive using third-party programs, you must back up all your data.

Hard drive manufacturer utilities

Diagnostic utilities may be on the CD that came with your hard drive. In any case, they can be downloaded from the hard drive manufacturer's website. Links to some manufacturers' download pages are provided below.

Western Digital: Data Lifeguard Tools (you must select the disk model).
Seagate: SeaTools.
Hitachi: Drive Fitness Test.
Samsung: Shdiag.

Diagnostic tools from other manufacturers can be found on their websites.

Victoria

program Victoria, designed for in-depth testing of the health of the hard drive, can be found at this link on the website hdd-911.com.

Excerpts from the official documentation of the Victoria hard drive test

MHDD

The MHDD program is also capable of comprehensively testing the hard drive and fixing errors on it. You can download it from this link from the website MHDD.ru.

You will find more information at the following links:

The disk is in perfect order - what next?

If no errors are detected on the hard drive, it is most likely not causing critical errors. It is possible that the problem lies in faulty RAM or the power supply does not have enough power to ensure the operation of all devices. You can check your RAM and drivers as described in the articles linked below.

You can mark fragments of text that interest you, which will be available via a unique link in the address bar of your browser.

about the author

I am interested in your opinion about these programs:

PC-3000 DiskAnalyzer, Ver1.02 Diagnostic utility for all types of drives (ATA-8, SATA, USB, SCSI, Flash, SSD), Windows NT/2000/XP/Vista/7 S.M.A.R.T. Vision, Ver4.1 S.M.A.R.T utility. diagnostics HDD IDE (ATA-8, SATA, USB, SCSI, Flash, SSD), Windows NT/2000/XP/Vista/7 http://www.acelab.ru/dep.pc/resource.php

aass, didn't use it. But I note that Victoria and MHDD are proven tools for serious diagnostics.

And Windows 7 can track SMART information. It will warn you if anything happens.

aass

Vadim Sterkin, Thanks for the answer and for the topic!
I agree with the assessment of the Victoria and MHDD programs, I myself use Victoria for serious diagnostics, but I try to test other programs, everything is learned by comparison.)

Dmitriy

When checking the hard drive with a standard program on Windows 7, it says that bad clusters were detected in null.sys... what kind of driver is this?

Dmitriy

Vadim Sterkin,

thanks...can it cause the system to slow down?

Sanyok

Hello.
I ran (hypothetically) checking drive C: from the graphical interface with parameters similar to your screenshot. Clicked the "Schedule disk check" button. Changed my mind. How can I cancel this one-time system disk check before rebooting the system?
I myself assume that it may be entered into the Task Scheduler.” But I want to know for sure. I see no point in experimenting. Since, after such a check was completed successfully once (in practical reality), it would be entered into the “Scheduler” even as a one-time check, and should, in theory, be saved. After all, tasks from the “Scheduler” do not have the ability to self-delete (I think so). But I didn’t find any traces in the “Planner”. As you probably know, I didn’t receive an answer on the Internet or on the forum.

Simply put, I want to know where this mythical “Check Schedule” is located and what methods and methods Windows 7 offers for adjusting it. And then it turns out like this - click, and ala-ulu...

Sanyok

Yeah…
There were graphics, but they all came out. This is some kind of graffiti, black and white, with a register. Just like Battleship Potemkin.
(Yes, I Googled, but really for a slightly different request). Thank you.
You can plan this by checking two boxes in the chart, and canceling by going to the register. They got smart here. Well, okay, there’s nothing to do - I’ll post in the forum.

Yes, by the way, does it make sense to check the second (bottom) checkbox if the system is on an SSD? After all, as far as my knowledge is concerned, the SSD controller itself periodically (when idle) scans the memory for faulty cells.
And this second checkbox, by definition, is intended to check for broken cells on the surface of the HDD.

Sanyok

Sanyok,

You turn on your TV with the remote control and set the wake-up timer. The next morning you wake up to the music of your favorite music channel. And life flows smoothly and measuredly. But at one fine moment it dawns on you - after all, tomorrow is Sunday. No problem, you tell yourself. With a slight movement of your hand and a screwdriver, without unplugging the TV from the mains, you remove the back cover, quickly replace a couple of resistors on the board and you’re done. Tomorrow you can sleep peacefully until lunchtime.
Do you feel what I mean?

Vadim Sterkin: Sanya, what do you mean, smart? You don’t have to split hairs by pressing all sorts of strange buttons, and everything will be fine :)

It's really funny, but also of course, of course Truth.
Yes, but it’s not quite out of place. I don’t see anything unpredictable or completely incomprehensible in checking the disk. And the conversation was about the fact that if you have already provided a graphical opportunity to schedule such a task, then be kind enough to provide the same opportunity to disable it, and not through one place (the registry). Either remove graphics when planning (do planning only through CMD), or provide the ability to disable this task using the graphical interface. As an engineer, in my technical practice and in the practice of interfaces of various industrial programs and IT, this is the first time I have come across something like this. Yes, and in Windows OS too.
That’s what I wanted to convey when I said, “We’ve been clever.”
When faced with a question, I noticed that this function causes complaints from the user in terms of frequent independent launches. But let's not talk about that. As unrelated to the topic.
And of course, thanks for the comments. Everything is clear to me here.

Regarding the bottom daw:

To perform a thorough disk scan, select the Scan and repair bad sectors option. In this mode, the scanning program attempts to find and correct physical errors on the hard drive itself, which may take much longer.

It doesn't say anything about the file system. More about physical disabilities. Some of us are wrong. Or I didn't understand something.
And further in the text:

To check for both file and physical errors, select both options: Automatically fix system errors and Scan for and repair bad sectors.

Please comment. I would like clarity on the issue.
So as not to press “all sorts of strange buttons”, and everything was fine. :-)

Vyacheslav

I am very surprised by the capabilities of checking and restoring a disk under Windows 8. Changing the partition size upward using Acronis Disk Director 11 ended with errors. I wanted to increase the size of the system disk using the empty space on the adjacent partition by 200 GB. As a result, this program reports that everything is OK, and the disk size in Explorer has not changed. I checked the disk using the OS - it said that there were errors and needed to be rebooted. After the reboot, nothing changed and a request appeared to reboot to fix it. As you can already guess, this also did not help. As a result, we have lost 200 GB, despite the fact that Acronis says everything is ok, but the system is not able to correct the errors found. Sadness. Do I need to format it?

Vyacheslav

Vadim Sterkin,

In fact, under Windows 7, a similar operation was always performed without problems. I always perform the task of expanding/narrowing a partition in 2 stages: first, we cut off a piece of space from the partition being compressed and transfer it to the “unallocated space” status from the required end of the partition, and then we expand another partition using this space (I do everything manually in 2 reboots in case of “jambs”, because Acronis performs a group of operations very strangely. There is a sad experience under Windows XP). So, if under Windows 7, after checking the disk, everything returned to normal and the free space did not disappear so easily, then under Windows 8 Acronis completed the first stage successfully, and when performing the second it broke down with errors, although then it reports that “everything is fine.” The problem was eventually resolved by booting from a Live CD from Acronis. It's a pity that this cannot be done under Windows 8. And I was counting so much on the “improved checking and correction of file system errors” promoted in the media. Of course, it is very difficult to trust that checking and background diagnostics of FS problems is working correctly. It is very confusing that the time to scan one partition under Windows 7 and under Windows 8 differs by orders of magnitude, for the better for the latter. Are all problems really so easily and quickly fixed? Maybe Windows 8 simply doesn’t notice most of them, or even worse, ignores them?

Vyacheslav

Vadim Sterkin,

Well, what option is there in Windows 8 to expand the partition size? I saw the Disk Management snap-in. Well, I didn’t see how it’s possible to cut the size of a logical volume from the desired end using “standard means”. There's also no way to move a partition within the unallocated space. If there is an analogue that I missed, tell me. Along the way, you did not quite correctly understand what I meant by the phrase “I had a bad experience under Windows XP.” And it was like this: after a reboot, this operation was performed and at that moment the electricity went out. Thus, I lost 2 partitions, although, in theory, there could have been 3 options: the second partition would have been lost, from which space was taken due to the incompleteness of the operation of moving NTFS service zones, or only the system partition would have been lost (although this is unlikely), or both partitions would be fine, and between them there would be some area of unmarked space. But I was very “lucky”. Let’s skip the topic of uninterruptible power supplies and it turns out that Acronis is a reputable company, and their products are sometimes dangerous to use in any way in the absence of alternatives from the OS. And then another “surprise” emerged. And even here everything is fine with the power supply. But as I already noted, the last problem was solved by booting from a Live CD from Acronis and a classic disk check, and not the over-optimized one from Windows 8, the benefits of which I have not yet felt. It seems to be there, but there seems to be no point. Or maybe I was using the disk check tool wrong. Unfortunately, this “optimization” still raises more questions and mistrust in me than answers.

Vyacheslav

Vadim Sterkin,

Irina

Conducted Windows hard drive diagnostics (chkdsk). There were no messages, but later it turned out that there was no free space. Although before the check, less than 50% of the disk was full. And now it shows 931 GB occupied. Was all the free space wasted? The disk is six months old.

I forgot to say, after that I checked with Victoria and reported that there weren’t even any errors.

Irina

This is not the case for me. We are not talking about the system disk. And about the external drive. I’ve already found out that the system marked all the free space as bad blocks. Now I’m trying to figure out whether it’s a failure or whether the screw has died.

Sergey

Vadim, I have the following problem: After running the chkdsk disk check utility, if both “daws” are checked, it asks to reboot and the check is performed, I don’t know what to call it, but it looks like MS-DOS - lines run quickly on a black background. After the next reboot, I look at the information in the Windows Logs - Application, text in English, “there are many letters,” but the meaning can be understood from a single sentence: “Windows has checked the file system and found no problems.” At the same time, a few lines above I was kindly informed that, they say, “Cleaning up 31 unused security descriptors.” Sometimes it is not “31 unused security descriptors” that are cleared, but more or, conversely, less. That is, something is still not quite right, and the program corrects it a little. Like, overall everything is fine, but the Bug died. So, no matter how many times I run this chkdsk, it requires a reboot to correct these errors, nothing else is detected. Previously, on another machine in Windows XP this happened rarely, but now it happens time after time.
The SSD drive is about a quarter occupied. The system is legal Windows 7 x64 Professional and is automatically updated. If you don’t run disk check, then there is no reason to worry, everything works fine, doesn’t glitch or crash. So, in connection with this, the question is - maybe there is no need to spoil your mood. I didn’t find a solution to the problem of these file system errors on the Microsoft website, and are they really errors?

far_town2 Kulyasov

Are there any methods to check if the power supply has enough power? And due to its insufficient power, can freezes/errors occur in games?

A computer's hard drive works hard every day, processing huge amounts of data, constantly writing and erasing it. Over several years of service, the condition of the drives may leave much to be desired: bad sectors are likely to appear, overheating, and frequent errors. To protect your data from sudden problems, as well as check the state of “health”, there are a number of useful programs for assessing the performance of the HDD.

Most special software can work with data from the S.M.A.R.T self-diagnosis system. Some programs make this easier, some cause difficulties for beginners, but are invaluable for specialists.

A small program to check the status of the hard drive. Despite its modest size, the functionality of this product is impressive. In addition to displaying temperature and health, you can get comprehensive information about your hard drive and all the available functions of the device. In addition, you can set up various types of important alerts.

It’s a pity that HDD Health doesn’t support the Russian language, and on x64 systems there may be glitches in the interface.

Victoria

A veteran in his field, an excellent program for diagnosing a drive. Unlike its analogues, it can do a very detailed reading test, without missing a single sector. As a result of scanning, you can get not only S.M.A.R.T. data, but also a graph of the disk state by area, as well as statistics on the speed of individual sectors. So this is an ideal program for checking the speed of your hard drive.

The long release date makes itself felt, frightening the unprepared user with sudden errors and an archaic interface.

HDDlife Pro

The most convenient program for checking HDD, with a hint of professionalism. Conducts both general analysis of drives and monitoring during operation, notifying about problems in a whole range of ways.
Most will appreciate the support for the Russian language and the clarity of data display. This program will do everything quickly, efficiently, and most importantly – independently.

HDDlife Pro is not pleasing except for its accessibility - it is only available for free use for 14 days, and then you will have to pay for constant monitoring.

It's not difficult to thoroughly check your hard drive. The developers have prepared for us many tools that allow us to save our data in a timely manner and predict failures in the operation of the drive. Which program did you prefer?

This article does not provide step-by-step guides to diagnosing your hard drive. However, you will find in it links to programs that allow you to comprehensively test your hard drive, as well as instructions for them. In addition, the article describes how to scan your hard drive partitions using built-in Windows tools.