The apple is blinking on the iPhone 5. The iPhone does not turn on, the apple is on fire - what to do? iOS system error

Hello! To begin with, it is worth describing the situation in more detail, otherwise it may not be clear from the title what the author means. Moreover, I recently encountered this problem personally, so the picture is clear before my eyes and it will not be difficult to describe the situation :) And the following happened - my rather old iPhone 5s was completely discharged, as they say, “to zero”, and it would seem that there was nothing criminal, I put it on charge and went about my business...

I return after a while and see very strange and inappropriate behavior of the device - the iPhone turns on, the screen lights up for a while (an apple appears and even a glimpse of entering the password) and immediately the display goes out and the phone turns off safely. And that's it, this happens all the time. For the sake of the experiment, I waited another 20 minutes - nothing changed (only), but it continued to turn on and off with enviable consistency.

Let me get ahead of myself and say that the problem was solved independently and without visiting a service center, and in a fairly easy way. But first, here’s how to prevent such a situation and what you should pay attention to:

1. Do not discharge the device until it is completely empty, especially if the battery is no longer new.
2. Don’t try to force it; in cold weather you need a lot more energy to start.
3. Use original accessories - the battery will only thank you.

Actually, almost all of these reasons coincided with me - the room was relatively cool, the battery had definitely been around for a couple of years (although it still holds), only the wire and charger were original.

What ends up happening? When connected to a charger, it turns out that all the incoming energy is spent solely on loading the system and backlighting the display. This energy is not enough, it cannot accumulate, the iPhone seems to turn on, but immediately discharges and turns off. And then everything will happen again. This is such a vicious circle. How to get out of it?

• Use a more powerful power adapter. The one that comes with the iPhone produces 1 ampere and is clearly not enough in such a situation. This means you need something stronger, for example, from an iPad. It has 2.1 amps of output and is able to provide more power that is enough to turn on. Is it safe? Apple says that, and there is no point in not believing it.
• If there is no other adapter at hand, you need to do the following operation - and leave it on charge for a while in this state. In this mode, the screen does not light up and the system does not boot, which means there will be no energy consumption and all of it will be used to charge the battery. After 20-30 minutes we turn on the iPhone and are glad that the shutdowns have stopped.
• This option is clearly not for everyone and will require some skill on your part. It consists of connecting the wire to the device for 2-3 seconds and, without waiting for it to turn on, immediately pull it out. And in such small portions, recharge the battery to a state that is enough to fully start the iPhone.

Finally, I would like to note that the situation discussed in this article is of course not normal and in an amicable way, the battery needs to be changed so that there are no other surprises in the future. But here everyone decides for himself.

Sometimes iPhone owners encounter an unpleasant phenomenon - the Apple logo appears on the screen and the device stops showing signs of life. As a rule, this happens after installing updates or crashing applications. The iPhone freezes or reboots on Apple, making further use impossible. We will tell you what to do in this case below.

In contact with

Force restart iPhone

Sometimes forcing the device to reboot helps get rid of the apple on a dark screen. iPhone 7 and newer models can be restarted by pressing and holding the power button and volume rocker simultaneously for 10 seconds.

To reboot older models, press and hold the Power and Home buttons for 10 seconds.

Updating iPhone in Recovery Mode

If a forced reboot doesn't help, try updating iOS in Recovery Mode. This method allows you to reinstall the operating system without changing the data stored on the device. However, it is only effective if the logo screen appears as a result of a glitch in the iOS update process. If the problem is related to the device's hardware or jailbreak, this method will not help.

To update iOS in recovery mode, you will need a desktop computer with the latest version of iTunes and a USB cable.

1 . Open iTunes on your computer.

2 . Activate recovery mode.

On iPhone 7 and newer Apple smartphones You can activate recovery mode by simultaneously pressing and holding the power button and the volume down rocker until the smartphone turns off. Then hold down the volume down button on your smartphone and, while continuing to hold it, connect your iPhone using a USB cable to a computer with iTunes installed. After about 10 seconds, the iTunes logo with a cable will appear on the iPhone screen, and a notification will appear in iTunes on your computer that your iPhone has been detected in recovery mode.

On earlier iPhone models You can activate recovery mode by simultaneously pressing and holding the power button and the Home button until the smartphone turns off. Then, on your smartphone, hold down the Home button and continue to hold it, connect your iPhone using a USB cable to the computer with iTunes installed. After about 10 seconds, the iTunes logo with a cable will appear on the iPhone screen, and a notification will appear in iTunes on your computer that your iPhone has been detected in recovery mode.

3 . In iTunes, click on " Update».

The above steps will update the device firmware. If the logo screen does not disappear, try again, but select " Restore" Please note that in this case, all iPhone settings will be reset to factory settings (all data will be deleted). You can restore them from backup copies.

Resetting (flashing) iPhone in DFU mode

You can get rid of the logo screen by resetting the settings in DFU mode. In this case, all data on the device will be lost, so make sure you have all the necessary backups before proceeding.

We talked in detail about how to put an iPhone into DFU mode.

If the problem is a jailbreak and you can't remove the tweak or app, a DFU mode reset is likely your only option.

What to do if the logo screen doesn't go away and your iPhone still doesn't work

If rebooting your device, updating the firmware, or even resetting the settings doesn't help, the problem may be related to the hardware. In this case, it is best to contact a service that specializes in repairing Apple products.

Why iPhone freezes and reboots on apple

If your iPhone screen suddenly goes blank, a logo appears on it, and then nothing happens, then something has gone wrong with the software. Reasons why the logo screen appears:

• The most common problem is the iOS update process crashing.
• If your device is jailbroken, the problem may be related to the jailbreak itself, a tweak, or an application installed from Cydia.
• Incorrect iOS beta version.
• Problems with the hardware (device hardware).

One of the simplest problems that can happen to your device. The phone is simple won't turn on And lights up battery icon (Apple) or a completely black screen. The way out of this situation is obvious! First of all, you need to make sure that your Charger works fine, try to test it on another device if the result is negative, then just buy a new charger and enjoy life!

If it is not possible to buy a new charger, then try to fix it yourself - glue the wires, then charge via a USB station, for example, via a computer!
Do not forget that in the cold Apple devices can turn off, since the battery cannot withstand even the slightest cold, it needs to be warmed up and a charger inserted!

And most importantly, if your phone is completely discharged and shows no signs of life, then just put it on charge and don’t touch it about 20-30 minutes!

Software problem

It happens that the iPhone stops working normally: some freezing in applications, or even in general don't turn on. In most cases, this happens after failed update or Jailbreak devices. The main thing is not to panic, because you can turn your favorite phone into a brick! One way to solve this problem is a phone called " Hard Reset". Here's how to do it: Hold down the buttons Home And Power, then wait 5-10 seconds and your phone is very likely to reboot and work successfully.

But if this option does not help you, there is a 100% way - reflash device via PC.
First of all, download the program iTunes from the official Apple website, further connect through the iPhone cord to the PC and turn off the device while holding the buttons Power And Home. Hold down the buttons until the screen goes dark, release the button Power, but hold Home - this will put the iPhone into DFU. After such an operation, a notification should appear on the computer that the device is in safe mode ready for recovery.

Apple is a manufacturer of modern gadgets. The products of this company are known all over the world. It is distinguished by its quality. But Apple phones are not perfect. They still remain the most common technique. Therefore, sometimes people think about the reasons why the iPhone does not turn on (the apple is on fire - that’s all). Below we will look at the most common scenarios. In addition, we will be able to understand how to act under certain circumstances.

Causes of all problems

First, let's try to understand why the iPhone won't turn on. The apple just burns, and after that the device turns off completely? This process is called a cyclic reboot.

It may occur for the following reasons:

• unsuccessful firmware;
• problems when removing jailbreak;
• breakdown of power circuits;
• battery failure;
• problems with the phone's motherboard;
• viruses;
• lack of charge on the phone;
• atmospheric temperature is too low or high;
• external damage to the device.

In addition, if the iPhone does not turn on (the apple lights up and nothing else happens), the reason may be hidden in a normal system failure. What to do under certain circumstances? How can I get my device to work normally again?

Firmware and hacks

iPhone won't turn on? Is the apple burning and the screen going blank?

Often this phenomenon occurs when trying to hack a device. That is, when removing jailbreak or during independent firmware.

As a rule, it is enough to simply take your Apple smartphone to a service center. They will quickly help you fix problems. Even if the experts failed to complete the task, you will have to abandon the iPhone. By the way, this doesn’t happen very often. And service centers will really help you restore your device after an unsuccessful jailbreak.

Battery charge

iPhone won't turn on? Does the apple burn and then go out? This phenomenon occurs very often.

In some cases, you can do without any serious action. For example, if the battery is low on energy, the smartphone will not turn on. It will either be completely discharged, or it will display an Apple image on the screen and then go dark.

• connect the iPhone to USB and to the computer, wait a while (up to half an hour) and try to turn it on again;
• connect the device to the network using the charger, and then repeat the start of working with the device.

Often, after connecting your Apple phone to the charger, you have to wait a little. As soon as the battery has enough charge to start working, the smartphone will turn on at the user’s command.

Temperature jumps

The external environment can also affect the performance of gadgets. Do you have an iPhone 5? The apple is burning and the device itself does not turn on?

It is necessary to check whether temperature standards are met. If an Apple device is kept at 0 degrees Celsius, the company cannot guarantee stable operation of the iPhone. If the gadget stays for a long time in an atmosphere with a temperature of -20 degrees, it may not turn on at all.

Overheating of the device also causes a lot of trouble. iPhone won't turn on? Black screen lights up and then turns off? It is possible that the device simply overheated. For example, with long-term exposure to the sun.

In such circumstances, the following should be done: leave the phone alone at normal temperature for approximately 20-25 minutes. After this, try to turn on the device again. Once the temperature regime is restored, performance will improve.

Without Cydia

iPhone won't turn on? Does the apple burn and go out? There is no need to panic. After all, fixing the situation is sometimes easier than it seems.

For example, you can perform an emergency reboot and turn on the device in mode without loading Cydia. To do this you will need:

1. Turn off the device.
2. Press the volume up button.
3. Press and hold the power button.

If nothing happens, you will have to remove the jailbreak. Better yet, reflash the device. When you turn on the device without Cydia, you will have to remove the jailbreak tweak. It is necessary to delete initialized programs one by one, starting with the newest one. And thus the functionality of the Apple phone will be restored.

Recovery

iPhone won't turn on? Is the apple burning and nothing more? You can try to restore the operating system. This technique helps get rid of the bulk of system failures.

iPhone won't turn on? Is the apple burning? What to do? Required:

1. Enable iTunes on your computer.
2. Connect your phone to PC via USB.
3. Click on "Home" and the "Power" button.
4. Keep the keys pressed for about 10 seconds.
5. Release the "Power" button.
6. Release the Home control once iTunes detects your iPhone in recovery mode.
7. Click on the "Restore iPhone..." button.
8. Click on "Next".
9. Click on "I accept".
10. Wait until the operating system is restored.

Once all of the above steps are behind you, all that remains is to turn on the phone and configure it to work with the system for the first time. There is nothing difficult or incomprehensible about this.

Technical difficulites

iPhone won't turn on? Is the apple burning and nothing more? This is a very common occurrence. Sometimes it is associated with hardware failures. They can be difficult to diagnose.

If you suspect that the iPhone itself is faulty, you just need to take it to a service center. Only there they will be able to confirm or refute the theory.

If it is possible to replace any failed elements of an Apple phone, service centers will offer the appropriate service. In some cases, you have to buy a new smartphone.

What most often breaks on Apple devices? For example:

• "Power" button;
• motherboard;
• charging controllers;
• battery.

Typically, in these situations, purchasing a new phone is not necessary. The listed components can be repaired for a reasonable fee. This is normal.

We found out why the iPhone doesn’t turn on (the apple just burns). And how to troubleshoot certain problems - too. In fact, everything is simpler than it seems.

Often, all problems are solved either by restoring the iPhone or rebooting the device. If all this does not help, you will have to contact the service center.

What advice can be given to users in order not to encounter problems turning on the iPhone? For example:

• install only licensed applications;
• do not reflash or hack the phone yourself;
• use antivirus programs for iPhone;
• follow the recommendations for charging and discharging the device;
• do not overheat or overcool the device;
• promptly clean your smartphone of old applications.

All this really helps to avoid crashes and problems when working with the iPhone. It is advisable to avoid damaging or dropping the phone and not storing the device in places that are too humid.

iPhone won't turn on? A black screen appears and that's it? Now fixing the situation is easier than ever!

The apple lights up on the iPhone, after which the smartphone turns off - the formulation of one of the most common iPhone problems. It can appear really suddenly. Many users who encountered the problem claim on our website that their smartphones turned into a “brick” after simply making a call, deleting some applications from the device, or other very standard actions. Whatever the reason why your iPhone is in this state, these instructions will help solve the problem.

Step 1. Connect your iPhone to your computer using a USB cable and launch iTunes. Make sure iTunes is updated to the latest version. You can check for iTunes updates on Windows in the program menu " Reference» → « Updates", on Mac under the " tab Updates» in the Mac App Store. You can download the current version of iTunes at official Apple website .

Step 2: Press and hold the buttons at the same time Home And Nutrition on iPhone and hold them for 10 seconds.

Step 3. Then release the Power button and continue holding the button Home until iTunes detects the device in recovery mode (about 10 seconds).

Step 4: In iTunes, click " Restore iPhone» and confirm the start of recovery. Important! All media files and other device data will be erased. The iPhone will also have the latest version of iOS for your device.

Step 5. In the window that opens, click “ Further" And " I accept».

Note that iTunes will initially download the version of iOS required for the device from Apple’s servers, and only after that will the restoration begin. You can monitor the progress of the firmware download by clicking on the button in the upper right corner of iTunes.

It is also necessary to emphasize that after connecting the iPhone to iTunes in DFU mode, nothing will be displayed on the smartphone screen. And only when iTunes downloads the firmware and begins direct recovery, a progress bar will appear on the iPhone display.

After successfully restoring the iPhone, all that remains is to perform the initial setup and start using the device.

What to do if iTunes does not detect iPhone in DFU mode

There are several reasons why iTunes may not detect an iPhone in DFU mode, ranging from an old version of iTunes to a technical malfunction. Before going to a service center or starting repairs yourself, it is recommended to check the integrity of the USB cable and USB port. Ideally, you can try connecting your iPhone to iTunes on another computer using a working cable.

In addition, the problem may be an iTunes error. In this case, iTunes must be reinstalled, but done correctly, removing program components strictly in the following order:

• iTunes.
• Apple Software Update.
• Apple Mobile Device Support.
• Bonjour.
• Apple Application Support (32-bit).
• Apple Application Support (64-bit).

An extensive guide on how to properly reinstall iTunes is available.

If nothing helps to get the iPhone detected in iTunes in DFU mode, then there is a high probability of a technical problem. In most cases, the battery is the culprit and after replacing it, the iPhone begins to function normally again. Detailed instructions on how to replace the battery yourself on various iPhone models are presented on our website.

Despite the fact that Apple produces fairly high-quality electronics, fans of gadgets with the Apple logo are still not immune to problems, and one of them is the white screen on the iPhone. Sooner or later, such a nuisance can happen to every gadget owner, so it’s better to immediately arm yourself with the knowledge of what to do in this situation.

How to understand that your gadget has this particular malfunction

The “White Screen of Death,” as iPhone users often call this problem, can be easily distinguished from any other malfunction. Main signs of failure:

• The white screen on the iPhone is on, and the smartphone does not perform any further actions
• The white screen and black apple are on (as when the device is loading), but the desktop does not turn on

In this case, the gadget usually turns off normally, but when turned on it does not load the desktop. Both of these signs indicate that an error has occurred in the program, or the iPhone screen is turning white due to hardware problems. As a rule, it is impossible to get rid of a white monitor using conventional methods - the gadget turns off, but when turned on it never loads the desktop, and the screen continues to simply glow.

In some cases, getting rid of the “white screen of death” is quite simple, without even resorting to the help of specialists. However, if a gadget with an apple logo has fallen from a height, most likely the white monitor lights up due to mechanical damage, and it is not always possible to get rid of it on your own.

Why does my iPhone screen turn white?

The symptoms described above may have different underlying causes. Let's look at the probable causes of the breakdown and ways to “treat” a white screen on an iPhone:

• software errors - “cured” by connecting to iTunes
• The LCD panel is broken - it needs to be replaced
• failure of the digitizer (the device responsible for touch functions) - replacement of the panel and digitizer is required
• mechanical damage - requires diagnostics and restoration or replacement of parts

Fortunately, in all cases except the last one, the white display can be “cured” without contacting service, which means you can avoid a long wait.

When the iPhone screen turns white due to software errors

The most common reason why a white screen lights up is a software error. If the display turns white for this reason, then you are in luck. Repairing your phone will not be difficult, and you do not need to take it to a service center for this. To get rid of the “glitch” when the iPhone screen turns white due to errors in applications or iOS, just follow the following algorithm:

• hold down the Home button and the Power button
• hold the buttons until the device reboots
• make sure the iPhone is working

If the reboot does not occur, you can try another option - hold down Home, then press the volume up and power off keys. If the problem really was in the software, the iPhone should work fine. However, it is possible that the white display will appear again after some time, because software errors rarely disappear on their own. The options for getting out of the situation are new firmware or returning the gadget under warranty. In Apple branded services, such problematic devices are easily repaired or replaced with new ones.

iPhone screen and LCD panel

A broken LCD panel is a more serious problem. As a rule, this part cannot be repaired. However, a simpler outcome is also possible - if the panel itself is in order, the contact has simply become disconnected. In this case, it is enough to do the following:

• remove the back cover of your iPhone - equip yourself with small screwdrivers and a suction cup to carefully remove the back cover
• inspect all the contacts (they are numbered) - you should be interested in contact No. 1
• if it doesn’t “sit” in the right slot, just carefully insert it into place
• assemble the device

If the problem was with the LCD panel, then the white screen should stop glowing. After turning on the iPhone, booting should occur as usual.

If the screen turns white due to digitizer failure

The third option why the screen is white when you turn on the iPhone is a failure of the touch panel. It is easy to distinguish it from the previous one: if the LCD is broken, the phone will receive calls even if you see only a white screen in front of you. To answer a call, you just need to swipe the screen where the call acceptance slider should be. If you cannot answer, then the reason is precisely the non-working touch panel (digitizer). What to do next:

• open the gadget as described above
• remove the old digitizer
• install a new one
• After assembly, a white screen should not appear

It should be noted that you can repair your smartphone yourself even if it is under warranty. Neither the digitizer nor the LCD panel are protected by factory seals, so you will not violate the warranty requirements.

When to contact specialists

The most problematic option is mechanical failure of the device. If the gadget falls and you get a white screen and a black apple, or vice versa - the iPhone apple becomes white and the screen itself becomes black (depending on the color of the case), it is quite difficult to identify the cause of the breakdown without special diagnostics. Most often, if you drop your iPhone, the screen turns white if the cable comes off. However, falling the device can lead to other unpleasant consequences that will require

After trying to turn on, your iPhone is frozen on the apple and no longer responds? This indicates that a serious error has occurred in the system, which the device cannot solve on its own. Be prepared to have to restore your iPhone. Below are all possible methods that will help you effectively solve the problem.

Diagnosis of the problem

The “eternal reboot” of the iPhone occurs due to a failure of the standard algorithm of actions that are necessary to turn on the smartphone. It is possible that the smartphone cannot access the central processor, check the memory and configure internal components.

There are only three reasons that provoke a “perpetual reboot” of the phone:

• IOS updates, restoration and transfer of data from a computer to an iPhone and other actions during which a third-party device gains access to the functions of the phone’s cores. Perhaps the error was caused by defender programs, a faulty cable or USB port;
• Have you done Jailbreak? The risk of system errors increases significantly if you jailbreak your iPhone. The device is more susceptible to viruses and third-party bots;
• Hardware problems. When turning on the iPhone, it first checks the functionality of the hardware components and, if important elements do not “respond”, the phone cannot continue to start. This way the apple logo doesn't disappear and nothing happens.

Solution #1. Hard Reset

A hard reboot helps 99% of the time. However, user data is not saved. After the reboot, all your personal files will be deleted. We advise you not to make a backup of your data, because its contents may contain utilities and options that caused the freeze.

To do a Hard Reset, press and hold the Home button and the Power button until the Apple icon disappears. Next, animated gears will appear on the screen, which indicate the start of the system rollback process.

Hard Reset will end in 5-10 minutes. Then the iPhone will turn on. You'll need to do the basic phone setup again (sign in to your Apple ID, set up the fingerprint scanner, etc.).

Solution #2. Working in DFU mode

If a hard reboot does not bring any results, you need to run the DFU operating mode - updating the standard phone firmware. This option allows you to enable automatic diagnosis and troubleshooting of the microprocessor.

As a result of DFU, peripheral software will be rolled back, without which the hardware components cannot start correctly.

Connect your iPhone to your personal computer and open the iTunes for PC utility. Make sure your phone is turned off. Press and hold the Power and Home buttons for 8 seconds. Then release the "Power" button, but still hold down the "Home" button until the message "iTunes has detected an iPhone in recovery mode" appears in the main iTunes window.

Next, in the program on your PC, press the OK key to start the process of rolling back the microprocessor firmware. Do not disconnect your computer or iPhone from your PC until the DFU recovery is complete. This may result in the phone being completely inoperable.

Solution #3. Connecting loops

Perhaps, after a recent phone repair, the motherboard cables were not connected securely. Turn off your phone and open the back cover. Then check the connections of all the cables shown in the figure. If necessary, disconnect and reconnect the component using a spudger or plastic spatula.