Command to disable Windows 10 test mode. Turn Windows test mode on and off

Many PC users are faced with such a problem as test mode in Windows 10. Not everyone can disable this annoying message hanging on the screen. But this guide will help you in this difficult task. Here you will learn not only the main way to fix the problem, but also an additional one, more suitable for users who do not want to take risks.

Causes of the problem

Before you disable test mode in Windows 10 Pro (or any other edition of Ten), you need to understand the reasons for this malfunction. Most often this happens if:

You have manually disabled the driver digital signature control system.
When installing any program, you agreed to activate the test mode.
While the operating system was running, or during its next update, some kind of failure occurred.

In addition, the error often occurs when using pirated Windows. In unlicensed versions, there may be several reasons for enabling test mode, ranging from driver signature checking, which is disabled by default, to modified system files. In general, you never know what the pirates did there.

Consequences

Even if you don’t know how to disable test mode in Windows 10, there will be no serious consequences from doing so. The computer will continue to function normally. The only way the “test” operating system will differ from the regular one is the corresponding inscription at the bottom of the desktop.

But if you still decide to take such a step as disabling test mode in Windows 10, then you may encounter some troubles. The fact is that some programs and devices use unsigned drivers to operate. They, in turn, will cease to function normally after test mode is deactivated, which may cause problems.

Basic method

You can use the command line to disable test mode in Windows 10. This method is recommended by Microsoft employees, so it is considered the main one. To use it, do the following:

Login to the command line.
Type "bcdedit.exe" then press the spacebar and add "-set TESTSIGNING OFF".
Confirm the changes and wait for the operation to complete.

Restart your PC. If you did everything correctly, the system will stop working in test mode and, accordingly, the inscription will disappear from the desktop.

Using a special program

Since disabling Test Mode in Windows 10 can sometimes lead to negative consequences, you can play it safe and use an alternative method. To do this, the UWD utility will be used, which is precisely used to remove all kinds of inscriptions from the desktop. To use the application:

Install the program and run it.
Click the “Install” button, confirm the changes you are making and wait until the operation is completed.
The program will ask you to restart your PC. Do this and wait for your computer to turn on.

If you did everything correctly, the annoying inscription will disappear from your desktop. Please note that UWD does not disable test mode, but only hides the message about its use.

Some programs require Windows to go into test mode during installation. I personally encountered this while trying to install a small utility called OpenedFilesView. During installation, she asked whether to switch to driver signature test mode, which I agreed to out of curiosity. After the reboot, I noticed the inscription in the lower right corner of the screen: I was wondering how to get rid of it. After some searching, I found a solution to the problem.

To disable test mode in Windows 7, open “Start” - “Run” (or press the Win + R key combination) and enter the following: bcdedit.exe -set TESTSIGNING OFF

To enable test mode in Windows 7, open “Start” - “Run” and enter the following: bcdedit.exe -set TESTSIGNING ON A little about what test mode is for. From the Microsoft website: "Microsoft has added a test mode to Windows so that users can test programs without an authentication certificate." That is, in test mode you can use programs whose drivers are not digitally signed by Microsoft. I hope that this article will be useful to you! ;-)

tahauov.blogspot.ru

Turning Windows test mode on and off

Found it on your computer and don’t know how to remove the “Test mode build...” message on Windows? Many users are facing this problem. There is nothing critical here, but the lines at the bottom of the screen can get in the way. Therefore, it is worth knowing what it is, how to turn on or turn off test mode in Windows 7 or 10.

The functionality of Win 7 and Win 10 provides for testing software without certificates.

What is this?

Test mode is a special function that allows you to test programs without a verification certificate. Not all software works with drivers that are electronically signed by Microsoft. For example, the utility has not yet been released in official versions or is about to be released, but it needs to be checked. Any user may sooner or later encounter such a program, after which he will be prompted to enable “Test”. Its activation will be indicated by the inscription “Test mode windows 10 build 0000” in the lower right corner of the screen. Instructions on how to remove Windows 10 test mode are given below.

Activation

Activation of this option in Windows 10 and 7, as a rule, takes place without the user’s knowledge. Only then does he notice that strange inscriptions have appeared on the screen. However, there is a way to activate this option yourself, without the help of the applications for which it is intended.

Find the “Command Line” utility. It is usually easy to find through the Start menu - in search or in “Standard Applications”.
Run the line as administrator (right mouse button, select the appropriate option).
Enter the following: bcdedit.exe -set TESTSIGNING ON
Click "Enter".

After this, a corresponding message will appear, which unnerves many users.

Deactivation

A much larger number of users are not concerned about how to activate the Windows “Test” on the “Seven” or “Ten”, but how to remove it. Let's figure out how to disable test mode in Windows 10.

Launch Command Prompt as administrator.
Type: bcdedit.exe -set TESTSIGNING OFF
Press "Enter".

After entering the command, the annoying lines will disappear, and this means that you managed to disable the test mode. However, to remove the enabled mode, you must restart your PC.

Now you know how to launch and disable “Test” in Windows 7 or 10. You should understand that disabling it may result in the desired program not working.

NastroyVse.ru

windows 7. Test mode: all the details

For many users in Windows 7, test mode is a familiar topic. However, few people will answer the question of why the system needs to be switched to this mode.

It all started with Microsoft tightening the requirements for drivers that are installed on a device with Windows 7. Now all of them must be certified by Microsoft. This is confirmed by a special digital signature. The system checks each installed driver before installation begins. If you decide to install new drivers, and the message “windows can’t verify the publisher of this driver software” appears on the screen, then your driver is not certified. Even if you then try to continue the installation, and this option is present, the system still will not allow this. The same situation occurs when installing some programs and utilities. This is where test mode comes to the aid of users. When Windows 7 is running in it, you can safely install unsigned drivers on your device, be it a computer or a netbook.

What is a signed driver?

Drivers can be signed or unsigned. The only difference is the presence of a digital signature. This is an electronic security label that confirms that the driver you have is licensed and has not been modified in any way. The digital signature can also be used to determine the driver's publisher. If there is none, then installing an existing product can be risky, so in Windows 7 the test mode for installing such drivers should be used in exceptional cases.

To install or not to install?

If you cannot decide which case is exceptional and which is not, there is no need to worry: there are not many such controversial situations. Before hastily putting the system into test mode, find out more about the device for which you are installing drivers. Of course, unlicensed programs are unsafe, and drivers without a digital signature are much more harmful to your computer. It is worth the risk of installing unsigned drivers only on those devices that are already at least a little out of date. For example, it is not now possible to find licensed drivers for all old printers and scanners. But, nevertheless, we must somehow work with these devices. This situation will truly be considered exceptional, so, dear Windows 7 users, the test mode will save you in this case.

Inclusion

The transition to test mode when installing some programs and utilities will occur with your consent - during the installation process, a window may appear in which you need to give permission to transfer the system to the appropriate mode. But in most cases you will have to turn it on yourself. Doing this is almost as easy as disabling Windows 7 test mode. So, go to the Start menu, select the Run line and enter the following code: bcdedit.exe -set TESTSIGNING ON.

Shutdown

After installing the drivers, you should remove the Windows 7 test mode. There are two methods for this, which differ slightly from each other. The first option resembles enabling this mode. Go to "Start", then to "Run". Enter the following: bcdedit.exe -set TESTSIGNING OFF. The second method is perhaps a little simpler. The above text must be entered after pressing the key combination "Win + R". Test mode is disabled.

In Windows 7, test mode is not the most everyday thing, but it is still a necessary thing, especially immediately after switching to a Windows 7 system from any other. The operating system changes, but the devices remain the same. So don't be afraid to use test mode in this case. But in other situations, you should still use licensed drivers.

If you were not the one who set up the PC, keep in mind that the system has a special solution that allows you to check the presence of a signature on the drivers.

fb.ru

Test mode windows 7 build 7601. How to remove it?

Hi all.

Today there will be a short article.

Recently this problem came up:

At the bottom right, the inscription “Test mode windows 7 build 7601” appeared.

This happens when test mode is turned on so that you can use unsigned drivers.

In fact, removing this inscription is quite easy.

You must open Command Prompt as an administrator.

Launch “Start - All Programs - Accessories - Run”, enter cmd.exe, press Enter.

On the command line itself we type the following:

bcdedit /set TESTSIGNING OFF

Reboot the computer.

That's all)

This is a simple life hack.

If this information was useful, leave comments and share with friends.

Bye everyone...

Best regards, Sergey Krivtsov

Microsoft is committed to meeting the needs of a diverse group of Windows users. Starting from ordinary users, who only need to have a standard set of OS tools at their disposal. And ending with advanced “geeks”, for whom the most important thing is to constantly be in the trend of the latest software innovations and electronic devices. It is for such “fans of digital progress” that in Windows 10 the developers have improved a special function - “Test Mode”.

What is “Test Mode” and what is its purpose?

“Test Mode” is a feature designed for Windows OS that allows you to switch your system from a public (standard) mode to a “special” mode. The peculiarity of this mode is that when it is activated, some security tools are blocked, namely, the so-called “verification of digital signatures” for drivers is disabled. In normal Windows operation, such a “check” can block the installation of some programs, applications, and update files. Moreover, there is a possibility that the user will not be able to correctly connect an external electronic device (smartphone, PDA, tablet, etc.) to his computer. Therefore, switching to “Test mode” can be an effective solution to such a problem.

Even though Test Mode disables some security tools, your system is still not at risk. The only problem may be the incorrect operation of installed programs, applications and updates without a “digital signature from Microsoft”.

Before you start working in Test Mode, you should make sure that this feature is not blocked by the BIOS settings. For this:

The author of this article noticed that when the “Secure Boot” protective mode is enabled to block the “Test Mode” function, the computer consumes an additional amount of resources due to the active operation of the corresponding system process (displayed in the “Task Manager” / “Processes”). Therefore, for faster operation of your PC, it is advisable to deactivate “Secure Boot”, even if you do not plan to use “Test Mode”.

Now let’s move directly to the “Test Mode” activation algorithm.

Click “Start”, type “cmd” in the search bar and launch “Command Prompt” with administrator rights.
Be sure to run Command Prompt as an administrator, otherwise changes made to the system may not work
One by one, type: first: “bcdedit.exe -set loadoptions DISABLE_INTEGRITY_CHECKS” press “Enter”, and then: “bcdedit.exe -set TESTSIGNING ON”, also press “Enter”.
A new command must be entered only after the message “Operation completed successfully” appears.
Reboot. Done, “Test mode” is enabled.
After activating the “Test Mode”, a corresponding notification will appear on your “Desktop”

Deactivating "Test Mode"

The process of deactivating “Test Mode” is almost identical to its activation, with some differences.

Video: how to deactivate “Test Mode” via the “Command Line”

System failure, or how to remove the “Test mode” notification on the “Desktop”

It is not uncommon for a notification about “Test Mode” to appear unexpectedly on the “Desktop”, even if you have not activated it. The reason may be either a system failure or automatic activation of “Test Mode” after downloading and installing OS update files. If deactivating “Test Mode” via the “Command Line” does not help and the corresponding notification continues to be displayed, then you should use other methods to resolve the problem.

In case of such a failure, the warning line also most often contains information about the build version of your OS

Disabling notifications using the Task Bar

In order to get rid of an unexpectedly appeared alert, you just need to follow a couple of steps:

Removing watermarks using Universal Watermark Disabler

Universal Watermark Disabler is an auxiliary utility for Windows OS that allows you to remove any “watermarks” from the “Desktop”.

Due to the fact that the official website of the program developer is no longer operational, you will have to use a search engine and download (at your own risk) the utility from any “software site” that can offer such an opportunity.

After downloading Universal Watermark Disabler, you need to:

Launch the utility and click “Install”.
The installer start window also contains information about your system.
An installation confirmation window will appear, accept the agreement by clicking “Yes”.
After confirmation, installation will begin automatically
Upon completion of the utility installation, close the corresponding notification and reboot.
After installing the utility, be sure to restart your PC

Video: how to remove watermark using Universal Watermark Disabler

Removing a watermark using My WCP Watermark Editor

Another effective utility for “cleaning” your “Desktop” of the “Test Mode” notification is My WCP Watermark Editor. The main feature of this software is that it works standalone (i.e. without the need to install it on a PC).

Since the creator of My WCP Watermark Editor has ceased his active work in developing and updating the utility, you can only (at your own personal responsibility) search for and download WCP from third-party sites that distribute this software for the Windows system.
Open WCP, check the box next to “Remove all Watermark” and click on “Apply new settings”.
You can also return the “watermark” back by clicking on the “Restore default settings” button
Wait until the watermark removal process is complete, and then reboot.
After completing the watermark removal process, be sure to restart your PC

If you suddenly want to return the “watermark”, notifying about the active “Test mode” through My WCP Watermark Editor (by selecting the appropriate “Restore default settings” tool), then the author of the article would like to warn you. The fact is that the “recovery process” through this utility does not always work correctly, which can cause minor malfunctions in the operation of your PC, namely the “Desktop” (based on personal experience, for example, the background or some icons may disappear, time and date are wrong).

Removing a watermark using Re-Loader Activator

This utility is primarily an “activator” of a license for Windows OS. However, its functionality can also help users remove the Windows Test Mode watermark. It is worth noting that Re-Loader Activator is not the most reliable software, so make a decision to use it only after “weighing” the associated risks.

Re-updating the system

Most often, the “spontaneous” appearance of a notification about the activated “Test Mode” is due to a system failure when installing components of a Windows update assembly. The solution to this problem is to update the system again through the Update Center. For this:

Using the WIN+I key combination, open the Settings settings and go to the Update and Security category.
Settings can also be accessed through the Start menu
In the Windows Update tab, go to Update History.
In the Windows Update settings window, you can also see information about the time of the last update package installed
After that, click on the “Uninstall updates” line.
In the "Update Log" you can also view a list of installed updates over time
In the “Uninstall updates” window that appears, select the latest installed update package and click the “Uninstall” button.
You only need to remove the latest system update
Restart your PC, then go back to Windows Update and click on the “Check for updates” button.
After clicking on the check for updates button, the search and installation process will begin automatically
Wait until the search and installation processes for update components are completed, then reboot the system.
After installing all update files, the system will reboot automatically

“Test mode” is a useful additional mode of operation of the Windows 10 system. Thanks to it, users can not only easily install various types of software (which does not have such a security tool as “digital signature verification”), but also connect all kinds of electronic devices to their PC and be confident in their correct operation.

Hello everyone Today we will talk about Windows 10, or rather about such a thing as Test Mode, this inscription appears in the lower right corner, how can I remove it? We’ll talk about this today, I’ll tell you everything, I’ll show you everything, I think everything will be clear to you.

If you have this mode turned on, but you didn’t turn it on yourself, then I don’t even know how it happened that it was turned on. I read on the Internet that this mode seems to be somehow activated when switching from Windows 7 to Windows 10, or when testing Windows 10, well, in general, something related to this. But don’t worry, you can safely remove the Test Mode sign

But in general, what is this test mode for? I'll write some information so you know what it's for. Although, to be honest, I don’t know exactly why it is needed, but as I understand it, in this mode, Windows allows the installation of drivers that have not yet been properly tested, or cannot guarantee stable operation. I enabled this mode manually, in my case it was necessary to install the virtual network adapter driver. Without this mode, the driver was not installed, such pies.

By the way, it’s winter outside, but there’s no snow yet, there’s already frost, today is December 1, 2017, but no snow has fallen. No, it fell out, but it’s so, well, frivolous and there’s not enough of it.. I want serious snow, so that it crunches under my feet, well, so that there is a real winter! It may be strange, but I love winter...

So, back to our topic. This is what the inscription looks like to me personally:

Agree that it’s a little annoying, especially when there’s still the sign Activating Windows... So, to disable the test mode, that is, to make this sign disappear, you just need to enter some commands into the command line. So, first we launch the command line, do everything as I show. Right-click on the Start icon and select Command Prompt (Administrator):

A black window will appear, here you need to enter the following command (you can copy and paste):

Press enter and then it should say Operation completed successfully:

By the way, the inscription Activating Windows also disappeared, but this is temporary, such an inscription still appears on its own after 4 hours of running Windows 10. Like you need to activate Windows and such an inscription will not appear

As you can see, my inscription disappeared after a reboot, but you may still have it! Then you need to enter one more command, this one:

bcdedit.exe -set loadoptions ENABLE_INTEGRITY_CHECKS

After you have inserted it and pressed enter, then paste this command again:

bcdedit.exe -set TESTSIGNING OFF

Well, press enter too. Under the first command and under the second it should be written that the Operation was completed successfully. As a result, you should have a picture like this:

And then most importantly, don’t forget to reboot! Well, as you can see, everything is not so complicated, these commands work not only on Windows 10, but also on other current Windows. Well, or rather they should work!

To turn test mode back on later, just in case you need to, just enter the following command:

bcdedit.exe -set TESTSIGNING ON

And then you still need to reboot for the test mode to turn on!

Well guys, do you understand everything here? Hope so! And if I wrote something wrong, then I apologize. Good luck in life and may everything go well for you

01.12.2016

For many Windows 7 users, test mode is a familiar topic. However, few people will answer the question of why the system needs to be switched to this mode.

It all started with Microsoft tightening the requirements for drivers that are installed on a device running Windows 7. Now all of them must be certified by Microsoft. This is confirmed by a special digital signature. The system checks each installed driver before installation begins. If you decide to install new drivers, and the message “Windows can’t verify the publisher of this driver software” appears on the screen, then your driver is not certified. Even if you then try to continue the installation, and this option is present, the system still will not allow this. The same situation occurs when installing some programs and utilities. This is where test mode comes to the aid of users. When Windows 7 is running on it, you can safely install unsigned drivers on your device, be it a computer or a netbook.

What is a signed driver?

To install or not to install?

Inclusion

The transition to test mode when installing some programs and utilities will occur with your consent - during the installation process, a window may appear in which you need to give permission to transfer the system to the appropriate mode. But in most cases you will have to turn it on yourself. Doing this is almost as easy as disabling test mode in Windows 7. So, go to the Start menu, select the Run line and enter the following code: bcdedit.exe -set TESTSIGNING ON.

Shutdown

In Windows 7, test mode is not the most everyday thing, but it is still a necessary thing, especially immediately after switching to Windows 7 from any other system. The operating system changes, but the devices remain the same. So don't be afraid to use test mode in this case. But in other situations, you should still use licensed drivers.

If you were not the one who set up the PC, keep in mind that the system has a special solution that allows you to check the presence of a signature on the drivers.