How to open the left toolbar in Photoshop. Working with panels in Photoshop CS6
Instructions
Open the toolbar in Adobe Photoshop, which contains information about the operations you have performed. To do this, open the “Windows” menu in the top panel of the graphic editor and check the “History” checkbox. After this, in the lower right corner you should see a new additional window with two tabs - “History” and “Operations” (History/Actions in the English version of Adobe Photoshop).
Select the first one and view the change history of the current file. In order to restore layers, return the work done on the file to the desired level, at which everything layers were in place.
You can also use the alternative undo method to revert layers in Adobe Photoshop. To do this, while in the editing menu for the current image, press the key combination Shift+Ctrl+Z or Alt+Ctrl+Z to return or repeat one or another action performed on the image.
You can also do this from the main menu of the document, using the “ ” and “Repeat action” item in “Editing” in the program panel at the top. This method is not as convenient as the first one, since you are not able to view the entire history of changes, which is much easier to navigate and return editing the picture to the desired position.
Set Adobe Photoshop's memory to the maximum number of operations stored in memory, this will help you if you often perform many actions on images, and their sequence contains too many items to store in memory at the default settings. This is done in the memory settings in the "Edit" menu. You can change the number of steps the program remembers up to 1000, but keep in mind that Photoshop will use more system resources.
note
If you reopen an image after saving it, the layers cannot be restored.
Sometimes optimizing the workspace turns into an evil monster for the user. For example, when accidentally pressing a certain key hides some necessary panel or menu window from view. Adobe Photoshop is no exception when you consider the amount of raster image manipulation it can provide.
Instructions
Launch Adobe Photoshop and open the Window menu item. Here are the items for turning on/off program panels. Activated panels are marked with check marks. So, to turn on or off any of the panels, just left-click on it. You can also use hotkeys to turn panels on/off, for example, to remove or restore panel layers, just press F7.
Press Tab. This hotkey allows you to hide or set the status bar at once, panel tools and all palettes. If you press Shift+Tab in this position, palettes will appear. If you press Shift+Tab when the program displays and panel tools, and the status bar, and palettes, then the palettes will disappear. Pressing Shift+Tab again will return panel with palettes.
In addition, you can independently configure hotkeys to turn on/off certain panels. To do this, click the menu item Window > Workspace > Keyboard Shortcuts & Menus and in the window that appears, open the Keyboard Shortcuts tab. Make sure that the Application menus item is activated in the Shortcuts for drop-down menu and expand the Window item. Click on the item for which you want to set a hotkey; an input field will appear to the right of it.
To most clearly explain why the toolbar is needed, we will draw some analogy with everyday life. Let's imagine that you need to assemble a small wardrobe. All the shelves and doors are disassembled, but you have a bunch of screws and self-tapping screws to install it. However, you do not have a single screwdriver or other constructive device. Naturally, you will not be able to perform any actions with your future closet. So it is in Adobe Photoshop: the image will be a representative of furniture, self-tapping screws, dowels and cogs are built-in functions of Photoshop, and the tool area (located, by the way, on the left) for working with photographs will be a screwdriver. Without it, you will in no way be able to process the photo as it should.
Getting your dashboard back is easy
Of course, the absence of such a function on the workspace does not mean that you cannot use the items in this panel. Each of them has a hotkey assigned. This means that when certain buttons are pressed, the corresponding device will open. But it is quite difficult to learn them all, and the choice of these parameters is small. After all, each toolbar item has sub-items that cannot be selected using hotkeys. For example, “Eraser”, when you right-click on it, gives the user a choice (which eraser you want to use). We hope that now you understand how important it is to place this wonderful functional shelf in your work area.
Standard layout of interface elements
How to get the toolbar back in Photoshop?
Let's assume that it has disappeared from you. It doesn’t matter how, the main thing is that she is no longer there. Don't be disappointed, because you can get them back in Photoshop in just two steps! Let’s not drag our feet, but let’s immediately begin these actions:
- On the top menu area, select “Window”.
- At the bottom of the window that appears, check the box next to the word “Tools”.
That's all, now the function area will once again serve you faithfully and help you process photos and other images.
You can turn the panel on and off in the Window menu.
How to remove tools?
No matter how paradoxical it may sound, you may need not how to return the panel in Photoshop, but how to remove it. This is also easy to do, especially since later you will be able to return it according to the previous two-step instructions. What to do?
- Go to the “Window” item from the top main menu of Adobe Photoshop.
- Uncheck the "Tools" box.
- If this method is not to your liking, then you can left-click the existing toolbar from the edge of the screen to any position, and then click on the cross that appears in the upper right corner of the toolbar to edit.
Instructions
In Microsoft Office Word and Excel applications, the panel tools by default it is located at the top of the window. If you don't see it in its usual place, it means it's folded. However, even in this mode, the tab names continue to be displayed. Left-click on the tab you need and the panel tools will be displayed. When the tool selection is complete, it will disappear again.
In order for the panel tools not hidden every time, right-click on the visible part of the panel. A context menu will open. Remove the marker from the “Collapse Ribbon” line by left-clicking on it. Panel tools will take its usual appearance. If the program has a Quick Access Ribbon, this operation can be performed using it. Click on the arrow button to the right of the ribbon and remove the marker from the Collapse Ribbon field in the drop-down menu.
If you need to return the panel tools in folders, open any folder on your computer. Right-click on the visible part of the panel and mark with a marker those components that should be displayed in the window. Alternatively, select Panels from the View menu. tools» and mark with a marker in the submenu the items that you need. The menu bar in folders is always displayed.
If the panel tools disappeared from the browser, there may be two options: either full-screen mode is enabled, or there is a problem in the Internet browser settings. In the first case, press the F11 function key on the keyboard, you will return to normal mode. In the second case, the method described in the previous step will do. Configure the display of the desired panels by right-clicking or using commands from the “View” menu.
Since the interface in most programs is similar, the described methods are applicable in almost all cases. If you want to add to the standard panel tools additional buttons, use advanced settings. Most often they are also called from the “View” menu.
Sources:
- where is the toolbar located
On the panel tools Photoshop contains the designer’s main tools: brushes, lasso, stamps, etc. It is almost impossible to work without it; if for some reason it disappears, then in order to return it, follow these steps.
Instructions
One not-so-fine day you realize that it’s time to reinstall the program, or worse, the system. Having followed all the necessary recommendations, you complete this difficult task. But that's not all - serious work remains to restore user settings.
Instructions
By default when installing the program panel the instrument is not filled in the most optimal way. It is impossible to take into account the needs of every user. Using the example of several programs, we will look at how to change it and customize it for yourself. First of all, let's make it convenient to work in . Depending on the browser you are using, the procedure may vary. However, once you understand the general principle, you can easily cope with the task. Open and carefully examine the existing panel tools. Determine which icons are superfluous and which are missing. After that, go to the "view" menu, " panel tools» - « ».
A window will open containing a large number of “icons”. When you hover your mouse over any one, you can see the action in the tooltip. Click on the selected icon with the left mouse button and, without releasing it, drag it to the desired panel. We release the mouse only when a thick vertical line appears on the icon on the right (determines the location of the icon on the panel). If you are satisfied with the location, release the mouse button - the moving operation is completed. To remove from the panel tools unnecessary icon, go to the “settings” menu in the same way (a window with “icons” should open). Move the cursor over the unnecessary icon, hold down the left mouse button and, without releasing it, drag it in the reverse order. Once the button is released, the icon will disappear from the panel tools.
At the bottom of the “settings” window, you can select the type of icon (only, picture with, text only). The default is just an image. There is also a button for creating your own custom panel. Having created it, fill it with the necessary “icons”, as indicated above. After completing all actions, press the “done” key. If in your “view” menu there is no item “ panel tools", look elsewhere. You can simply click on panel tools right mouse button, select in the context menu - configure. Perhaps the window view will be different. It may consist of two parts. On the left are the icons that you can install, on the right are the installed ones. Using the “add” and “delete” keys, move icons from one part of the window to another. Save the settings.
Set up in the same way panel tools in all other programs. So, for example, you can easily and simply make a convenient panel for working in Word or Excel. There, the settings function is also located in the “view” menu.
If after the system you see a clean desktop, do not be upset. To place the usual icons (“ ”...) on it, you need to right-click on any part of it and go to the “properties” section. There select “desktop”, then “desktop settings”. Check the appropriate boxes.
Video on the topic
There is a toolbar in almost every computer program. Its main purpose is to quickly execute (with one click) the most frequently used commands.
Panel tools is an element of the graphical user interface. It is designed to place several icons on it in order to simplify work with the program. Typically, the panel is a rectangle located in a vertical or horizontal position, which contains the following elements: buttons, menus, a field with an image (both static and dynamic, for example , clock) and text, as well as drop-down lists. Icons located on the panel tools in computer programs, call the most frequently used functions, as well as those accessible from the window menu. In order to use any icon responsible for a particular function, just double-click the left mouse button (the arrow is directed to the image of the required element). The functions of the elements located on the panel are indicated by text or signs. In the case when there are a lot of icons and it is impossible to fit them on the panel, they can be added both as menus and scroll buttons. In some computer programs (for example, in graphic editors), panels tools can be easily detached from windows and attached to each other for maximum user convenience. Panels are also used, which are separate windows (usually present in the standard set of desktop environment programs). They are not tied to a specific application; they are located along several desktop borders or one. Such a panel contains a dynamic list of buttons (a set of functions available through the header: “collapse”, “expand”, “close”); drop-down menu (list of open windows, ready for use at any time); menus and buttons for launching programs.
Video on the topic
How to restore a panel in Photoshop?
Master's answer:
Sometimes optimizing your workspace on your computer can play a cruel joke on you. For example, if you accidentally pressed a certain key, after which the desired panel or menu window was hidden. Adobe Photoshop is no exception, because it has a large number of possibilities for working with raster images that it provides.
First, launch Adobe Photoshop, and then open the Window menu item. There are items here that enable or disable program panels. All active panels will be marked with a check mark. If you want to turn on or turn off a panel, just left-click on it. You can also use hotkeys. For example, if you want to remove or restore the layers panel, you just need to press F7.
Press Tab. This hotkey helps to set or hide the status bar, all palettes and the toolbar all together. If you press Shift+Tab in this position, then palettes will appear. If you press Shift+Tab while the application is displaying the toolbar, palette, and status bar, all palettes will disappear. If you press Shift+Tab again, the key combination will return the palette panel to its place.
You can also customize your own hotkeys to turn the desired panels on and off. To do this, click Window>Workspace>Keyboard Shortcuts & Menus, and open Keyboard Shortcuts in a new window. Then make sure that the Application menus item is activated in the new Shortcutsfor drop-down menu. Then expand the Window tab. Next, click on the item for which you want to set the required hotkey. To the right of the item you will see an input field.
Remember that only function keys - F1-F12, as well as combinations of Ctrl and other buttons can be used as hotkeys. If you accidentally specify a key that is already in use, the application will inform you about this using the inscription at the bottom of the window - is already in use and will be removed from (the item for which this key is already assigned will be indicated below). Under the inscription you will see two buttons Accept and go to conflict and Undo Changes. If you click on the first inscription, you will confirm the replacement of the hotkey or keys, and if you click on the second, then cancel the change of buttons.
In this tutorial, we'll learn how to manage and organize your work with the various panels that make up a fairly large part of the Photoshop CS6 interface.
We use panels very often when working in Photoshop. For example, when we add, remove, select, and arrange layers in our document, we are working in the Layers panel. Also, when working with this panel, we add layer masks and various effects. When we create adjustment layers and subsequently work with them, we use the Adjustments and Properties panels.
We can select colors using the Color and Swatches panels, work with individual color channels using the Channels panel, return to a previous action in our work using the History panel, and much more. Having so many panels can be confusing when working with Photoshop, especially if you're new to the field, which is why it's important to know how to manage the panels and how to arrange them on the screen.
Before we start looking at panels, let's make sure we have the same panels in the same places on our screens. To do this, we must be sure that we have a standard operating environment for the program installed. In other lessons, we looked at what the program's working environment is. Essentially it is a way for the program to remember which panels should be placed on the screen and where they should be located.
The program works with several built-in working environments, from which we can choose the ones we need and even create our own at our discretion. Currently, if you look in the upper right corner of the program interface, you will see a window for selecting the “Work Environment” option. The phrase “Workspace” itself is not specified anywhere, but by default the “Essentials” parameter should be set there. If another parameter is set, click on the window and from the list that appears, select the top one - “Main working environment”:
In the options window, "Primary workspace" must be selected
Next, let's reset all settings and reload the "Primary Workspace" option so that all panels return to their original positions. Most likely, they are already located in their original places if you have not yet worked with the interface, but to be completely sure of this, click on the word “Primary workspace” in the options window and select “Reset Primary workspace” ( Reset Essentials) at the bottom of the list:
Reset all settings and reboot the “Main working environment” parameter
Now that you and I are convinced that we see the same panels, let's learn how to manage them and how to organize them. Photoshop's panels are arranged in columns on the right side of the screen. By default, there are two columns with panels - the main column on the right and a secondary, narrower one on the left (in the figure below, both columns are highlighted):
The panels are located in two columns along the right edge of the program interface
Let's take a closer look at the main column with panels. By default, Photoshop has three panels - the Color panel (at the top of the column), the Adjustments panel (in the middle), and the Layers panel (at the bottom of the column). . How do we know that we are working with the Color, Adjustments, and Layers panels? We'll understand this based on the title tab that each panel has at the top:
Three panels - Color, Adjustments and Layers - open in the main panel column
You may have noticed that although only three panels are open, there are actually more panels located in the main column. We can clearly see other tabs with different panel titles. For example, the top Color panel has a heading on the right side called Swatches, the Adjustments panel has a heading called Styles, and the Layers panel has two other headings called Channels. ) and “Contours” (Paths). What's the matter? Since working in Photoshop involves constantly dealing with multiple panels, Adobe had to find a way to avoid excessive screen clutter. A solution was proposed - to combine, “mount” two or more panels into separate groups of panels. Thus, several panels can take up the space of one panel!
How it works? Let's look again at one of the panels we currently have open - the "Color" panel. We know this is the Color panel because the panel title at the top says Color. Next to it there is another tab with the heading “Samples”. This is an additional title for a panel that is grouped together with the Color panel, but is currently hidden behind the Color panel. Only one panel can be active at a time in a group, and we can always tell which panel it is because the titles of other inactive panels are dimmed and grayed out. To switch between panels in a group, simply click on their tab titles. In my case, the Color panel is active, but if I click on the tab titled Swatches, the Swatches panel becomes active, coming to the front. The Color panel will be hidden behind the Swatches panel, but I can easily make it active again at any time by clicking on its heading:
To switch from the Color panel to the Swatches panel, click on the title
I'll do the same with the Adjustments panel, which is currently active in its own group. I can see that the Styles panel is in the same group behind the Adjustments panel. To switch to the Styles panel, I'll click on its title. This action will cause the Styles panel to become active and the Adjustments panel to hide behind it. When I need to make the Adjustments panel active again, I'll simply click on its title:
Switch between the “Adjustments” and “Styles” panels by clicking on their titles
Notice that the Adjustments panel is located first in the group, and the Styles panel is second. There is no specific reason why the Adjustments panel is in first place, and in fact, changing the order of the panels is easy. All we need to do is click on the tab with the title of the desired panel and, while holding the mouse button pressed, move the tab to the left or right. In my case, I selected the Adjustments panel by clicking on it and, without releasing the mouse button, moved the panel to the right on the other side of the Styles panel:
Click on the tab with the title of the “Adjustments” panel and move it
After moving the panel title tab to the desired location, I release the mouse button and the panel moves to its new position. Now the “Styles” heading is the first in the group of panels, and the “Correction” heading is second:
The order of the headings was easily changed
What if, instead of just changing the order of the headings within one group, I wanted to move the panel to another group? Let's say, for example, that I want to move the Styles panel into the same group as the Color and Swatches panels. To do this, I just need to click on the tab labeled “Styles” and, again holding down the mouse button, begin to move the tab up into the new group of panels until a blue highlight border appears around the new group:
A blue highlight border appears around a group of panels that I want to add a new panel to
The blue frame signals that I can release the mouse button, at which point the program will merge the Styles panel into a group containing the Color and Swatches panels. Notice that the Adjustments panel now sits alone in its own group, which is still a group even though it only has one panel (after all, we can add to that group at any time other panels):
In a programmePhotoshop is very easy to move panels from group to group.
As we have already noted, the “Correction” panel is now in a separate group. In fact, we can create a new group from any panel. Let's say I want to place the Color panel, which is currently in a group with the Swatches and Styles panels, into its own group, and I also want to position this new group just above the Adjustments panel. To do this, I'll click on the tab titled "Color" and, while holding down the mouse button, begin to move the tab towards the Adjustments panel until a blue highlight rectangle appears between the two existing panels. It's important to note that this time we're waiting for the highlight rectangle to appear, not the bounding box:
A blue highlight rectangle appears between two groups of panels
Once the highlight rectangle appears, I'll release my mouse button and Photoshop will place the Color panel in its own group between the other two groups:
A new group has been created for the Color panel
We can temporarily collapse panel groups to make more room for panel content in other groups. To temporarily collapse a group, double-click any tab with a title in that group. While the group is collapsed, all you see in it is a list of tabs with panel titles. In my case, I double-clicked the Swatches tab to collapse the group it belonged to:
Double-click any tab with a title to collapse a group of panels
To again display the entire contents of the group, click on the panel title tab once, which is what I did in my example with the Swatches tab. Double-clicking the mouse button collapses the contents of the group, single-clicking displays all the contents of the group:
Click on any tab with a title once to expand the panel group
If you no longer need an individual panel in a group and want to close it, click on that panel's title tab to make it active, and then click on the menu icon located in the top right corner of the panel. In my case, I click on the Color panel menu icon:
Each panel has its own menu, which can be accessed by clicking on the corresponding menu icon
From the menu that appears, select the “Close” command:
From the list of menu commands in the “Color” panel, select “Close”
This action will close one specific panel while the other panels in the group remain open. In my case, the Swatches panel remained open and the Color panel closed:
The Color panel has closed, but the Swatches panel remains open
If you want to close a group of panels entirely, click on the same menu icon in the upper right corner:
Click on the menu icon again
This time, to close the entire group of panels, from the list of menu commands that appears, select the “Close Tab Group” command:
Select the command “Close tab group”
And now a whole group of panels have disappeared (the Color and Swatches panels):
Column of panels after closing the group containing the Color and Swatches panels
To reopen a panel after closing it, or to open any other program panels, go to the “Window” section in the menu bar at the top of the screen:
In the menu bar, select the “Window” section
This action will lead to the opening of a menu section where, among other items, you can see a complete list of panels available to us in Photoshop. A check mark next to the panel name means that this panel is open and placed on the screen:
To view the full list of panels, go to the "Window" section
To open a panel that is not yet displayed on the screen (which does not have a checkmark next to it), simply click on its name in the list of panels. I'll reopen the Color panel by clicking on it:
Select the “Color” panel in the “Window” section»
And now the Color panel has reappeared in the main panel column. Notice that the Swatches panel has also appeared on the screen. This happened because the Color panel was grouped with the Swatches panel before closing, and Photoshop remembered this. The program also remembered that the Color and Swatches panel group was located directly above the Adjustments and Styles panel group. By remembering the location of the panels, the program greatly simplifies our work:
The Color panel (and Swatches panel) has been re-mirrored on screen
Before we continue, I'll add a small but important note - when we view the full list of panels in the Window section of the menu, a check mark next to the name of an individual panel means not only that it is open, but also that it is currently currently active in her group. Other panels can also be open in a group, but if they are not active (their contents are hidden behind the active panel), they will not have a check mark next to their name. For example, if we look at the Layers panel, we see that it is grouped with two other panels, Channels and Paths. But the Layers panel is currently active in the group:
The Layers panel and the Channels and Paths panels behind it
If we look at the list of panels in the Window menu section, we will see that the Layers panel, of course, has a checkmark next to its name. However, despite the fact that the Channels and Paths panels are also open on the screen, there are no checkmarks next to their names, since they are not currently active panels:
Only the Layers panel has a checkmark next to its name (unlike the Channels and Paths panels)
I'll click on the panel tab titled "Channels" to make it active in the group, causing the Layers panel to fade into the background along with the Paths panel:
Switch to the “Channels” panel
And now, if we look again at the list of panels in the “Window” section, we will see that a check mark has appeared next to the “Channels” panel. The Layers panel is still open (if I had closed it the way we did earlier, it would have disappeared from the screen completely), but since it is no longer the active panel in the group, there is no check mark next to its name. And of course, there is no checkmark next to the name “Contours” either. Sometimes this checkbox can confuse us. The presence of a checkmark means that the panel is open and active, the absence of a checkmark means that the panel may be closed (it is not reflected anywhere on the screen) or simply inactive and hidden behind the active panel in its group:
There is now a check mark next to the name of the “Channels” panel, and there is no longer a check mark next to the name “Layers”
So far we have only looked at the main column with panels, but to the left of the main column there is also a secondary column. At first glance, this column seems a little strange because, by default, the panels in this column are presented as icons:
The second column with panels is located to the left of the main column
Initially, this second column contains two panels - the History panel at the top and the Properties panel below it. You may be thinking with irritation: “How can we figure out what these panels are by looking at the incomprehensible icons?” First, if you have the Show Tool Tips option checked in the Settings section (it's checked by default), as soon as you hover your mouse over each icon, the panel names will appear on the screen.
Secondly, and this is much more convenient, you can hover your mouse over the left edge of the column and it will turn into a double-headed arrow. Once the arrow appears, click on the edge of the column and, while holding down the mouse button, drag the edge to the left to resize the panel. As we move the edge, the names of the panels will appear next to the icons, which will be much more useful for us. Once you've added enough space for the panel titles to fit in, release your mouse button:
Change the width of the second column with panels to display the panel names next to the icons
The secondary column is especially suitable for placing panels on it that we need open not all the time, but periodically. The good thing about displaying panels as icons is that in this form the panels do not take up much space on the screen, and we can quickly access them. If we click on the panel icon (or its name), Photoshop will temporarily expand the panel to its full size so we can work with it. In my case, I'll expand the History panel by clicking on its icon/title:
Click on the icon/title of the “History” panel to expand it to full size
To collapse the panel back to icon view, we can either click on its icon/title again, or click on the little double arrow icon:
Click on the small double arrow icon to collapse the panel
We can expand all the panels in the second column at once by clicking on the smaller double arrow icon in the top right corner of the column:
In order to collapse all panels even further - to the view of only icons, move the mouse cursor over the line separating the main and secondary column. When your cursor turns into a double-headed arrow, click on the dividing line and drag it to the right until only the panel icons remain visible. When working with columns, where all panels are presented only in the form of icons, a lot of free space is freed up on the screen, however, for the work to be effective, you must remember the names of all the icons well. I wouldn't recommend this way of displaying panels, but that's just my opinion:
Now all panels in both columns are presented as icons
To quickly expand the main column of panels to full size, click the double arrow icon in the top right corner again:
Click on the double arrow to expand the main column with panels to full size
And now the main column is presented in its original expanded form, which is how I usually leave it:
The main column is now presented in its original expanded form
Moving panels between columns
We can move panels from one column to another with the same ease as between groups. In my case, I opened several more panels (Histogram, Info, and Navigator) by selecting them from the Window menu. The program placed the panels in a secondary column, along with the History and Properties panels that were originally in the column:
Three new panels have been added to the second column
Let's say I want to group the Properties panel, which is located in a secondary column, with the Adjustments panel in the primary column. To do this, you just need to click on the title of the “Properties” panel and, while holding down the mouse button, begin to move the panel in the main column to the “Adjustments” panel until the familiar blue highlight frame appears:
Move the “Properties” panel into the group with the “Correction” panel
I'll release the mouse button and the program will place the Properties panel in a new group in a new column. We can do the same thing in reverse by clicking on the bar and moving it from the primary to the secondary column:
The Properties panel is now grouped with the Adjustments and Styles panels
Finally, I suggest you consider a few useful keyboard shortcuts for temporarily hiding all panels on the screen. Pressing the Tab key once will cause all panels on the right side of the screen, the toolbar on the left side, and the settings panel at the top of the screen to temporarily disappear. In other words, all panels except the menu bar will disappear. Pressing the Tab key again will cause all panels to appear in place.
To hide panels located only on the right, press Shift+Tab once. Pressing Shift+Tab a second time will bring the panels back:
The panels located on the right will temporarily hide after pressing a key combinationShift+Tab
With hidden panels, move your mouse all the way to the right side of the screen and the panels will temporarily appear on the screen. If you move your mouse cursor away from the right side of the screen, the panels will disappear again:
Moving the mouse cursor to the right side of the screen will temporarily display the panels
I'll add a small note at the end... If during our lesson you worked with the panels yourself, making some changes on the screen, and now want to return the original settings of the panels back, simply reload the "Main workspace" parameter, guided by the steps that we discussed in at the very beginning of our lesson.
And now we're done! We've taken a closer look at the different ways you can work with the panels that make up a large part of the Photoshop CS6 interface! To further explore the program, visit our Photoshop Basics section for various tutorials on layers, selections, interface, and other elements of the program, or explore other topics that interest you!
Translation: Ksenia Rudenko
