How to set a ringtone for an Android contact group. How to put a melody on a contact on Android - favorite compositions for those closest to you. Set a permanent ringtone using the Music app

Emphasize your uniqueness. This also applies to ringtones and videos on your Android smartphone. A song or ringtone from a reality show or a favorite movie as a ringtone or SMS melody, a video for an incoming call - this is a sign of the individuality of the smartphone owner, telling others about his tastes in music and cinema. By following our instructions, you can independently post a melody on any Android device.

How to set a ringtone or SMS message on an Android smartphone

Instead of forcing others to listen to the standard Android melodies installed in the default call settings, you set as a signal something of your own that is close in spirit, for example, arias performed by Vera Davydova. You can set anything downloaded on the Internet to a call or SMS.

Set a permanent ringtone using the Music app

Your actions are as follows.

1. Go to the Android main menu and launch Music, the default audio app.
2. Select the desired song from the list.
3. The Music application will offer to play it. Press the Options key.
4. Set this track as your ringtone.
5. The Android system will notify you that the selected song has been successfully installed on the incoming call.

At the first incoming call, this song or melody will sound.

How to change the default ringtone through the Android File Manager

The Android operating system, unlike iOS, does not create any difficulties with setting a ringtone for calls and SMS. Any melody or song downloaded from the Internet using either the built-in Android Download Wizard or another “downloader” such as DVGet or tTorrent will be saved on the SD card - each of these applications, as a rule, keeps its own folder on the memory card, in which is thrown by all downloaded content. And it, in turn, can be easily found in the Android File Manager.

1. Return to the main menu and select Android File Manager.
2. Go to the folders on the SD card or in the gadget’s built-in flash memory.
3. Get to the folder where your favorite songs that you downloaded the day before are stored. By default this is the Music, Sounds, Audio or similar folder.
4. Select the desired file from the list. The file name extension - mp3 - speaks for itself.
5. Press and hold for three seconds until the file name is highlighted. A menu of actions with the file will appear.
6. Press the “vertical ellipsis” key - a menu should appear in which you can select to set the melody as a ringtone on Android.

Congratulations! You now have the desired ringtone.

How to change and customize your ringtone for individual contacts or a group

How to change one of the numbers

1. Open the standard Contacts application.
2. Select the desired subscriber from the directory and click on the “user” icon - the contact menu will open.
3. In the contact menu, select “Set ringtone”.
4. Select "Find using file manager". The Android File Manager will launch, making it easy to find the MP3 song you need.

Ask this person to call you back - the selected composition will play.

How to assign a ringtone to a contact group in Android

1. Open the Contacts app and go to the contact groups tab.
2. Select the desired group and the “Edit Group” menu item.
3. When editing a group, you can change the ringtone for them. Clicking on this menu allows you to install a ringtone from the standard Android ringtone library.

The selection of melodies downloaded over the Internet in the Contacts application has not yet been finalized - this is the task of new versions of Android. To set your own ringtones, use third-party apps such as Group Realtones. Most of them are available on PlayMarket.

How to set a different sound for notifications or SMS

1. Launch the standard SMS/MMS application (“Messages”) and go to settings.
2. Go to the “Ringtone” submenu.
3. Select the Explorer tool (or File Manager, depending on your Android version) and the Android File Manager will launch. If you have another file manager installed, it will appear in the list. In principle, it doesn’t matter which one - the main thing is to get to the desired melody or real tone.
4. Get to the desired file.

Check the sound of the melody. Send some free SMS, to which you will receive a response SMS. Or log in, for example, to any of your bank accounts or e-wallets that have an SMS alert set up when you log in. Setting the ringtone for incoming messages is complete.

How to adjust settings for ringing tones

Fortunately, the volume of ringing melodies and vibration are easily adjusted using the volume “arrows” on the device itself. You need to adjust the parameters of the ringing signal when music or video is not playing on the gadget, preferably when an incoming call arrives. There is another way: give the command “Settings - Sounds” and set the volume and vibration to your liking.

Installing and configuring video for incoming calls

But if everything is simpler with melodies and music, then “video tones” for an incoming call is a special issue. Why is this even necessary, you ask. And yet, Android software developers have brought this opportunity to life. One such application is Videotones Pro or VideoCallerID.

Videotones Pro app

The Videotones Pro program, despite being paid, has simple and accessible settings that make it easy to install video on a call.

Videotones Pro comes with a built-in set of short animations and videos. Other videos can be downloaded from PlayMarket. The Videotones Pro library also contains “video tones” selected by the application developer. You can completely disable video playback for incoming calls.

Why the installed signal may fail

The problem with installing ringing signals in Android may appear suddenly. Causes:

• a defect in the current version of Android (“crooked” program code, or the “custom” Android kernel does not support some functions);
• no Root rights (by default, ringtones are located in the Android system folder - \system\media\audio\ringtones, it is possible to replace them with those available in your music library);
• the third-party application you are using is not fully developed or has not been updated to include the required functions.

Video: How to Set a Custom Video Clip for Incoming Calls Using the VideoCallerID App

It is not enough to have a high-quality and expensive mobile device. Customizing your smartphone to make a good impression on others is easy! Now you know how to set any song or video to an incoming call or SMS so that pleasant sounds can be heard from the speaker of your gadget.

For each contact on Android, you can select a separate ringtone that will be used when calling only this subscriber. This can be done using standard system tools or third-party applications.

Setting the melody

You need to set music for specific phone numbers through the Contacts application. Depending on the version and firmware of Android, the procedure may differ slightly, but the setup always begins with opening the phone book entry to which you want to put the song.

On some Android devices, there is no “Ringtone” option in the settings. But there is a button “Add field”, when clicked, a list of options appears. Select an item with a name like “Ringtone” or “Melody” and add it to the contact page. Then repeat the procedure for selecting a specific song for the phone book entry. Recent versions of Android use a slightly different procedure for changing the sound of an individual phonebook entry:

Having a file manager is important when deciding how to put a ringtone on a separate contact on Android. Without a file manager, you simply cannot show the system where the track is located, which must be linked to an entry from the phone book and played when there is an incoming call from a certain person.

If the song is not installed on a separate entry, check where it is stored, in the phone memory or on the SIM card. Open your contacts list and turn on the “On phone” or “On SIM” filter. You can set a custom ringtone only to those contacts that are in the memory of your mobile device.

Using Third Party Applications

If you already understand how you can set a ringtone for a contact in Android using built-in tools, but for some reason you cannot complete the procedure, then use third-party applications to change the ringtone. One of the proven solutions is the Ringtone Maker program.

This is a convenient application for working with signals that allows you to create and set a ringtone for all incoming calls or only certain calls.

Another interesting feature of Ringtone Maker is creating a ringtone. You can select any track, use the sliders to specify the fragment that should be played, and then set it as a ringtone.

The versatility of a modern smartphone can be used to identify an incoming call without reading the corresponding information on the display. To do this, it is enough to assign an individual melody to each subscriber (or group) entered in the phone book. How to set a melody to a contact on Android will be discussed in today’s material.

The installation procedure is generally not complicated, but it differs slightly depending on the device model and Android version. Below we will look at the possible options.

For Android version 5.0 (and higher)

Open the phone book, select a contact, open it, long press to bring up an additional menu, click on the “edit” line, scroll through the list of possible actions. select the line “call melody”, open the list of melodies, return to the previous menu, save. Ready:

On some models the steps will look slightly different: " Contacts" -> select a contact -> " Change» -> « Add another field» -> « Ringtone" -> select a melody and at the end of the list click " Add a ringtone«:

For Android version 4.0 (and higher)

On most fourth versions, our manipulations to set an individual melody for the selected subscriber will also be simple: in the main menu, open “ Contacts", select the one you need, call up the additional menu in the contact settings, click " Set ringtone", then " Custom ringtones", find the desired track, put a checkbox, save, done:

As you can see, the actions on all models are generally identical and it won’t be difficult to guess what to do and how to do it if on your device you see items with different names or a pencil icon that replaces the word “change” (edit).

Using third party software

If the built-in tools of your smartphone do not support the function of setting a personal melody or it was simply not possible to fulfill your plans using the methods described above, then we suggest taking advantage of an excellent opportunity that can easily solve the issue of how to set a melody for a contact on Android - the utility Rings Extended .

Working with the program is extremely easy: after installation, without creating a separate shortcut, Rings Extended will simply be added to the system and, when needed, you just need to go to “Settings”, open the “Sound” section, select “Ringtone” (can be notifications), and immediately use the utility to select a melody. In this case, the program will offer all the options available on the smartphone for selecting music files, be it an explorer, a player, etc.:

You can see how to work with the program in the presented video:

Was this material useful to you? Write in the comments. And that's all for today. Good luck!

Many smartphone users on the Android operating system do not know about all the functions of their device. This OS allows you to customize almost everything and personalize your phone: set not only the standard melody for calls and SMS, but also any of your own, turn on video display for an incoming call, or put music on a separate contact or group so that you can identify the caller without looking at the screen.

Standard ringtone for incoming calls

Setting your own ringtone

Using the player

Sometimes a user listens to music from his playlist and suddenly realizes that this melody must be on the call. Especially for such cases, another method has been developed to set the sound for an incoming call. It is much simpler than the previous one and requires fewer steps.

Via file manager

By connecting to a PC

The Sound Selector application can display not only standard ringtones, but also custom ones. However, sounds simply saved on the smartphone will not be available. So how do they become visible to this program? To do this you will need a computer and some theoretical knowledge.

How to change the ringtone on Android - video

How to change the ringtone for an individual subscriber

How to change the ringtone for each contact on Android - video

How to assign a ringtone to a group of contacts

Using the Group Ringtones app

Some phone models and versions of the Android operating system may not allow you to select a ringtone for a group of contacts. The Group Ringtones application will come to the aid of such users.

How to set a ringtone for SMS

How to set up SMS sound - video

How to put video on a call

1. Download and install the Video Caller Id app from GooglePlay.

   

2. Open the application. From the side menu, you can select a contact, group, or set the default video.

   

3. For example, you want to set a video to a contact. Click on the big plus in the lower right corner to add a contact from the list.

   

4. Select a person (or several people) from your contacts list.

   

5. Click the icon in the top right corner to add a video.

   

6. Select an application.

   

7. Click on the video that will be installed on the contact.

   

8. After this, the person you selected with the attached file will appear on the main page. If you click on the contact icon, a context menu will appear where you can always change the settings.

   

How to set your video to an incoming call - video

Why doesn't the melody install / crash / return to standard?

Some of the possible causes of errors:

• transferring tunes from internal memory to a memory card;
• installing a memory card;
• operating system (firmware) update.

Possible solutions to the problem:

• transferring ringtones to the phone’s internal memory, for example, to the Ringtones folder;
• reset settings to factory settings;
• flashing the phone's firmware (a last resort).

I had a problem, I solved it today, regarding ringtones for contacts. They flashed the phone with a new one, and everything worked, but they said about the old one, it wasn’t fully flashed. I installed the version 4.1.2.

zicitate

You need to reset program settings to default. Then everything will appear again. Go to settings - applications - ALL tab - menu (three dots in the upper right corner) - Reset settings - Yes

ekäkyäi https://fixim.ru/problem/q24625-%D0%BD%D0%B5_%D1%83%D1%81%D1%82%D0%B0%D0%BD%D0%B0%D0%B2%D0 %BB%D0%B8%D0%B2%D0%B0%D0%B5%D1%82%D1%81%D1%8F_%D0%BC%D0%B5%D0%BB%D0%BE%D0%B4 %D0%B8%D1%8F_%D0%BD%D0%B0_%D0%BA%D0%BE%D0%BD%D1%82%D0%B0%D0%BA%D1%82

You can always make your phone special by setting original ringtones for calls, SMS, groups of contacts and an individual. Both standard tools and third-party applications available on GooglePlay are suitable for these purposes.

When someone calls you, you hear a ringtone. Do you want to change it? Read our instructions.

Unlike iOS, where changing the ringtone is a whole procedure, in Android everything is simple and can be set up in a matter of minutes. Today we will talk about several ways to change the ringtone on an Android smartphone.

How to change the ringtone on Android 6.0 Marshmallow?

First, we’ll tell you how to set the desired melody for a call on “pure” Android 6.0. On Android 7.0 Nougat the principle is exactly the same.

1. Go to “Settings”, “Sounds and notifications” (or just “Sounds”). To the right of the “General” profile name, click on the settings gear.

2. Click on “Ringtone” and select “Open with Media Storage” in the pop-up window.

3. The window that appears should contain all the music that is on your smartphone. Select the desired song and click "OK".

Set a ringtone through the player

Depending on the version of Android and proprietary shells, different players are preinstalled in smartphones. Some allow you to change the ringtone, some do not. The easiest way is to download the desired player from Google Play. We used AIMP and Poweramp.

1. Go to the player and find the song you want to ring. Start playing it. On the AIMP and Poweramp screens in the upper right part there are three dots each that call up the menu - click on them.

2. In the window that appears, select “Set as ringtone” (AIMP) and “Ring” (Poweramp). Confirm the action.

Melody for contact

If you want to assign specific music to an individual contact, such as a friend or parent, follow the instructions:

1. Go to “Contacts” and select the person you need. There are three menu dots in the upper right corner of your profile - click on them.

2. In the window that appears, select “Set ringtone”.

3. The system will prompt you to select an application through which you will search for the desired melody. Select a file manager or do everything as described in the first paragraph.

As you can see, setting music or a ringtone for a call on an Android smartphone is very simple - it won’t take more than a couple of minutes.