How to remove constant updates on Windows 7. Using the Update Center. What are Windows updates and why are they needed?

On all operating versions Windows systems updates are provided, as they complement the system, correct possible mistakes and improve performance. Of course, such updates will not harm your computer, they are needed and should be downloaded, but there are cases in which it is better for users to refuse updates altogether. On Windows example 7, the following reasons can be identified: you have a pirated version of the system and updates block it, your computer has too little memory and updates will not physically fit on it, you have a very busy schedule and you work with the computer, and automatic updates slow down your performance. In this case, you can choose: disable updates completely or cancel only automatic ones. This article will discuss both methods.

How to disable Windows 7 update completely

This instruction cancels updates on your computer altogether: the system will not search for updates or download them. If you want the updates to still be downloaded, but their installation remains at your discretion, then it is better to give preference to the second instruction below. If you don't need updates, then proceed with this one.

Go to Control Panel via Start.

Set icon sorting to “ Large icons" Find the “Administration” item and select it.

Among all the services and system parameters, you need the “Services” item. Launch it by double clicking.

Almost at the very bottom of the list you will find the line “Windows Update”. This is where you can disable system downloads updates and their installation. Double click on this service.

In the window that appears, in the “Startup type” line, select the “Disabled” value.
Now click “Stop” on next line and close the window by clicking “Apply”.
Updates are disabled on your computer.

How to disable automatic updates on Windows 7

Very convenient way, since it allows you to independently choose when to download and install Windows updates.

Go back to the Control Panel in the way you already know. Set the sorting to “Category”. Click on the “System and Security” section.

Look for the “Windows Update” tab; it will contain several sections below. Among them, click on “Turn automatic updates on or off.”

In the drop-down list you can select the item that suits you:

Automatically download them, but ask you about installation time.
Ask you about both downloading and installation.
Do not update the system.

After selecting the item, uncheck the “Recommended updates” box and click “Ok.” Please note that you must be logged into an administrative account.
Now updates in Windows 7 are disabled and configured as you wish.

I'm tired of this endless Windows update 7! Downloads and installs every day. Internet speed slows down, computer slows down, and reboots without asking. And this system doesn’t care whether I’m watching a movie, writing a term paper, or making an important report for management. And updates are installed for 2 hours, and do not allow you to turn off your PC or laptop.

And most importantly - there is almost no sense! Yes, vulnerabilities are eliminated, but you will not notice the difference at all BEFORE the update and AFTER it. Unless the traffic eats up, but there’s room local disk C will pick it up again. In general, complete hemorrhoids.

Therefore, if you are also tired of this option, turn it off! Especially for those who do not know how updates are disabled on Windows 7, below is attached detailed instructions with screenshots.

There are 2 ways to turn off the annoying Windows 7 auto-update feature

First, let's look at turning off automatic updates on Windows 7. This is necessary so that the system does not download anything or start installation without your permission.

If you suddenly need to turn on the search for updates, then open the same window and select one of the first three items to choose from (whichever is more convenient).

However, after this, the message “Windows Update is disabled” will constantly pop up at the bottom of the screen (near the clock). Please turn it on."

So that it doesn't get boring:

Ready. You just removed this message, and you won't be bothered by it anymore.

Method 2: Windows Update

For this:

Ready. You have just completely disabled the update service on Windows 7 (searching for and installing them).

This procedure is carried out the same way on all computers and laptops running Windows 7. The version (Home, Professional, Ultimate) or bitness (32- or 64-bit) does not affect this.

Why do you need to turn off auto-update in Windows 7?

Unlicensed installed copy of Windows. At the very least, activation may fail during the update. In the worst cases, the computer or laptop does not turn on after a reboot and you have to reinstall the OS (Microsoft developers know how to give surprises :)).
Limited internet. If you have a limited amount of traffic, then regular updates will cost a pretty penny.
Slow internet speed. Auto-updates greatly reduce loading speed. And if it’s already small for you, then...
Low hard drive space. Auto-updates do not take up much space, but over time they can accumulate to 10-20 GB. And if there is little space left on your hard drive, your computer (or laptop) will run slowly.
You cannot turn off your PC during auto-update. This is terribly annoying (don't leave it on overnight!).

By the way, as an option, you can disable only auto-update. That is, select the 2nd or 3rd option in the Update Center settings (so that the installation decision is made by you personally).

Certainly windows service update is an important and necessary thing, for example, to enhance protection operating system, service files or user files from attacks by viruses and hackers. Often developers use this service to install into the operating system program code, correcting errors they made that were not identified during the development and testing phase. Let's look at two ways below on how to cancel a Windows 7 update.

How to cancel Windows 7 update yourself

Mostly, users refuse to receive updates for the following reasons:

- emergence critical errors after changing service files that lead to system inoperability.

— reduction of hard drive space due to the installation of more and more new improvements. This is relevant for owners of laptops and tablets with a small SSD.

— drop in Internet speed due to loading.

— long time to turn off/on the computer during installation.

— users pirated versions Windows 7 may experience system functionality restrictions if the legitimacy of the license is verified.

Stopping the service responsible for updating Windows 7

In order to completely stop the process, run: “Start” - “Control Panel” - “Administration” - “Services”. Find the Windows Update service and go to it.

Set the startup type to “Disabled” in the window that opens. Then click the “Stop” and “Apply” buttons.

You can close the windows - the process is stopped.

Cancel windows update via Explorer

This is not as drastic a method as the first one. Execute: “Start” - “Control Panel” - “Windows Update”. In the window that opens, select “Settings”.

In the new window, in the “Important updates” section, set: “Do not check for... (not recommended)” and uncheck all the boxes below to cancel. If necessary, you can launch the functionality manually by clicking the “Check for updates” button.

If necessary, you can manually install updates by clicking the button "Check for updates".

Rolling back Windows 7 updates

In conclusion, we note that incorrect updates that interfere with the operation of the operating system can be removed by returning to the state prior to the changes made. Execute “Start” - “Accessories” - “System Tools” - “System Restore”.

Choose desired point recovery and press Further.

System restore takes some time; you must wait for it to complete. This way you can undo the changes and return to the original state.

Nothing foreshadowed trouble, when suddenly the computer starts to reboot, and the system insistently asks not to disconnect the device from the network, because installation is in progress Important updates Windows 7.

Surely, at least once every PC user has encountered similar problem, and after starting the system, the results of most programs were lost. Yes, this is exactly what happens, a sudden, forced update and we lose the data that we did not have time to save. Today we’ll talk about what to do to avoid this situation and take care of updating the system in advance or disable forced updates.

How to disable Windows Update 7

Usually, to the average user The PC does not need these updates at all. They add minor changes to the system that most people are not aware of. Only sometimes, every six months, Microsoft introduces something really useful for ordinary users into the update, for example, on October 8, 2013, update KB2852386 was released, which adds the ability to clear updates stored in winsxs folder. Usually about such important innovations write to news feeds, groups, forums and portals, so if you are at least a little interested in this, it will be difficult to miss such news. So how to disable automatic update Windows 7?

So, we decided to disable annoying updates. How to do this? To do this, you need to perform the following steps.

Go to the “Control Panel”;
Select “Windows Update”;
Next “Setting parameters”;
Set it to "Don't check for updates."

How to disable Windows 7 update service

The procedure does not end there. If you stop at this step, the updates will still be installed. Microsoft has made sure that you receive the latest software in a timely manner. For complete shutdown The update requires several more steps.

Open "Control Panel";
Go to the “Administration” section;
Launch "Services";
Select “Update Center”;
In the Startup Type section, check the Disabled box and then click Apply.

Timely updating of the system is designed to maintain its relevance and security from intruders. But on various reasons some users want to disable this function. In the short term, indeed, sometimes this is justified if, for example, you perform certain manual settings PC. In this case, sometimes it is necessary not only to disable the ability to update, but also to completely deactivate the service that is responsible for it. Let's find out how to solve this task in Windows 7.

The name of the service, which is responsible for installing updates (both automatic and manual), speaks for itself - "Windows Update". You can deactivate it as follows: in the usual ways, and not quite standard. Let's talk about each of them separately.

Method 1: "Service Manager"

The most commonly used and reliable way to disable "Windows Update" is the use "Service Manager".

Click "Start" and go to "Control Panel".

Click "System and safety".

Next, select the name of the large section "Administration".

In the list of tools that will appear in a new window, click "Services".

There are more quick option transition to "Service Manager", although it requires memorizing one command. To call up a tool "Run" dial Win+R. In the utility field, enter:

Click "OK".

Any of the above paths will open a window "Service Manager". It contains a list. IN this list need to find the name "Windows Update". To simplify the task, build it in alphabetical order by clicking "Name". Status "Works" in the column "State" means the fact that the service is running.

To disable "Update centre", select the name of this element and then click "Stop" in the left area of the window.

The shutdown process is in progress.

The service has now stopped. This is evidenced by the disappearance of the inscription "Works" in field "State". But if in the column "Startup type" value set "Automatically", That "Update centre" will be launched the next time you turn on the computer, and this is not always acceptable for the user who shutdown.

To prevent this, you should change the status in the column "Startup type". Click on the element name right key mice (RMB). Choose "Properties".

By going to the properties window, being in the tab "Are common", click on the field "Startup type".

Select a value from the drop-down list "Manually" or "Disabled". In the first case, the service is not activated after restarting the computer. To enable it, you will need to use one of the many manual activation methods. In the second case, it can be activated only after the user again changes the launch type in the properties from "Disabled" on "Manually" or "Automatically". Therefore, it is the second shutdown option that is more reliable.

After the choice is made, press the buttons sequentially "Apply" And "OK".

The window returns "Dispatcher". As you can see, the element status "Update Center" in a collumn "Startup type" it was changed. Now the service will not start even after rebooting the PC.

How to activate again if necessary "Update Center", described in a separate lesson.

Method 2: "Command Line"

You can also solve the problem by entering a command in « Command line» , launched as an administrator.

But it's worth remembering that this method stop, unlike the previous one, deactivates the service only until the next restart of the computer. If you need to stop it for more long time, then you will have to repeat the operation through "Command line", but it’s better to use it right away Method 1.

Method 3: "Task Manager"

You can also stop the update service using "Task Manager".

Method 4: "System Configuration"

The next method to solve the problem is through a window "System Configurations".

Go to window "System Configurations" you can from the section "Administration" "Control Panels". About how to get into this section, it was said in the description Method 1. So, in the window "Administration" click "System configuration".

You can also run this tool from under a window "Run". Call "Run" (Win+R). Enter:

Click "OK".

Shell "System Configurations" launched. Move to section "Services".

In the section that opens, find the element "Windows Update". To do this faster, build the list alphabetically by clicking "Service". Once the item is found, uncheck the box to the left of it. Then click "Apply" And "OK".

A window will open "System Setup". It will ask you to restart your computer for the changes to take effect. If you want to do this immediately, then close all documents and programs, and then click "Reboot".

Otherwise, press "Exit without reboot". Then the changes will take effect only after you turn on the PC manually again.

After restarting the computer, the update service should be disabled.

As you can see, there are quite a few ways to deactivate the update service. If you need to disconnect only for the period of the current PC session, then you can use any of the options described above, which you consider the most convenient. If you need to shutdown for a long time, which involves at least one reboot of the computer, then in this case, in order to avoid the need to perform the procedure several times, it would be optimal to shutdown after "Service Manager" with changing the launch type in the properties.