How to turn a computer monitor into a TV. How to use a monitor as a TV and vice versa. How to make a TV from a monitor - remaking a CRT

Using a monitor to watch TV is a practical choice these days, as buying a TV for cable TV or streaming services is an additional and expensive investment.

With the development of display production technology, connecting them to a set-top box or TV tuner has become as simple as possible. Streaming services like Hulu or Amazon Prime Video are great, but you can still watch content that's free on over-the-air television, like the Olympics or soccer championships. This article explains how to use a monitor to create a TV so you can watch your favorite TV shows, sports, and news that are not available through streaming services.

Advantages of a computer display

The first obvious reason to use a monitor instead of a TV is to save money. Although the cost of LCD panels has dropped significantly in recent years, purchasing a separate display for each media source consumes valuable resources and finances. In addition, computer monitors provide sharper images because they typically have a higher pixel density per unit screen area. They convey movement better. The image is smoother and less blurry because they generally have a faster pixel color change rate than a TV. This usage is also facilitated by the fact that a computer display allows for different types of connections, giving users the ability to simultaneously connect different set-top boxes, tuners, and even game consoles.

Below are the steps by following which you can turn a monitor into a TV for watching over-the-air, cable or satellite TV.

Checking the display and hardware

The first thing to determine is whether the monitor is receiving TV signals from a tuner or set-top box. Most modern models use HDMI as the main I/O port. If the display runs at 1080p resolution there should be no problem. But keep in mind that new devices require at least a 720p output.

Another important aspect of the question of how to make a TV from a monitor without a computer is whether the display complies with HDCP requirements. This is a DRM-like system for protecting HD and UHD content from piracy. If the monitor's HDMI input does not support HDCP, it will not decode the signal, which will negate all your previous efforts.

You should also check whether your display, set-top box or tuner has built-in speakers or a 3.5mm jack so you can directly connect desktop speakers or a headset. If they are not available, then you will need an adapter or a sound extractor, which will be discussed below.

Additionally, a compatible mount may be required to mount the monitor on a wall.

Connecting to a cable TV set-top box

If the display satisfies all the above requirements, then the answer to the question whether it is possible to make a TV out of a monitor is positive. To do this, connect the set-top box to the display device with an HDMI cable and connect the speakers to the 3.5 mm output. In most cases, all settings are performed automatically, but sometimes minor manipulations may be required in the monitor, tuner or set-top box OSD using the remote control to select the correct inputs and outputs.

Audio extractor

How to turn a monitor into a TV if it is HDMI compatible but does not have speakers or audio output? In this case, an audio extractor such as J-tech Digital Audio may be required. The device comes with a variety of interfaces including 3.5mm, optical or RCA jacks. You definitely need to check which plug is used by external speakers, since the cost of the gadget reaches 3.5 thousand rubles.

On the other hand, if you have a display with legacy connectors such as DVI or VGA, you can use a TNP converter. This device converts the HDMI signal to DVI, sending audio to a 3.5mm jack. Please note that the adapter only supports 1080p and 720p. It must be used carefully, since such devices do not work correctly with all models.

How to connect a display to a TV tuner

How to make a TV out of a monitor if you need to watch local broadcasts instead of cable TV? To do this, you can use an over-the-air antenna and tuner. The strength and quality of the broadcast signal varies depending on the area.

As with cable TV, you'll need an HDMI-compatible monitor and external speakers if you don't have built-in ones. But the most important equipment that will need to be installed is the antenna. The quality of the reception depends on it. For city dwellers, a small room model is sufficient. On the outskirts, an external antenna with a range of 80 to 120 km may be required.

If there are many obstacles nearby (such as tall buildings or trees), an outdoor installation will provide a clear and stable signal.

You also need a TV tuner, since monitors (unlike televisions) do not have a built-in receiver. Most displays come with an HDMI connector, but you may also need an RCA to 3.5mm cable.

The antenna connects to the RF jack, and the HDMI cable connects the tuner to the monitor. If external speakers are needed, they can be connected to a television receiver, which itself will extract sound from the television signal. Once connected, you will have to go to the device menu to select the correct inputs and outputs.

If the signal is not clear, you should adjust the direction or position of the antenna until the best picture quality is achieved. To avoid problems, you can purchase a model designed for a longer reception range.

How to make a TV from a monitor to watch satellite TV

The procedure is similar to connecting a TV tuner, only instead of an over-the-air antenna you need to connect a satellite one. True, to install and configure the latter, you may need the help of a specialist. If you already have an antenna, you should connect the HDMI connectors of the tuner and display, connect the speakers and configure the output port using the remote control.

Streaming

How to turn a monitor into a TV without a computer to view streaming broadcasts over the network? This is the simplest option, since you only need to purchase a Chromecast or Amazon FireTV costing from 1.3 to 3.5 thousand rubles. The gadget connects directly to the HDMI connector of the monitor and is configured via an application for a mobile phone or PC. Some cable operators allow you to stream popular channels for an additional fee, making your viewing experience much more convenient.

Please note that you may need external speakers connected to the display via the auxiliary jack. Before turning your monitor into a TV, you need to double-check that the HDMI input you plan to use is HDCP compatible so that audio and video decoding from your Chromecast media player is possible.

Finally

Adding a TV function to a monitor used for computer games or work increases the efficiency of its use. Most modern graphics cards output via DisplayPort, leaving the HDMI slots free for other purposes, such as watching TV or connecting a game console. If your monitor only has one HDMI port, you can purchase a splitter.

Additional equipment that allows you to view TV programs on the display does not have to be expensive. Just before making a TV from a monitor, you should make sure that it meets the necessary requirements.

If the PC system unit is hopelessly outdated and is not at all suitable for use either as a music center or for upgrading it to “turn” it into a “TV,” then we can recommend another method.

To do this you need to use the so-called external TV tuner for monitor(TV – television).

An external TV tuner is an independent device that is connected to the electrical network to a television antenna, to the PC system unit and to the PC monitor.

To be more precise, an external TV tuner for a monitor is connected as if at a break in the cable connecting the PC system unit and the PC monitor. Only this cable is not actually broken, but the TV tuner is connected instead of the monitor to the PC system unit, at the same time the monitor is connected to the TV tuner.

The external TV tuner has a remote control. Being connected to the electrical network, to the monitor, the PC system unit and to the television antenna, this TV tuner becomes a regular TV, which is also controlled like a regular home TV using a remote control.

Using the remote control, such a “TV” can be turned on and off, you can increase and decrease the sound volume, switch and configure channels, adjust brightness, contrast, color and other parameters.

What is important is that such an external TV tuner does not require a PC system unit to operate. The connection to the system unit is maintained if there is a desire to use this system unit in the future. Otherwise, it is enough to have an external TV tuner and a computer monitor to assemble a familiar TV from these two devices.

In the absence of a PC system unit, such a “TV” only needs to have a monitor and sound speakers, which should be connected to the corresponding connectors of the TV tuner. And then the PC system unit can be sent “to the dustbin of history.”

By the way, some people use the option described above in order to new computer monitor worked like a TV. More precisely, they buy a new cheap (liquid crystal) LCD monitor, and also purchase an external TV tuner for the monitor for this monitor. Connect and use a computer monitor as an LCD TV, for example, in the kitchen.

A very exotic option for using an obsolete computer running operating systems that are no longer supported (for example, Windows 3.1) is that with its help you can safely access any Internet sites without fear of all kinds of viruses.

There are no more viruses for outdated operating systems, and “new” viruses “don’t take them”! True, the browsers of these obsolete computers are also outdated, and are not always able to display all the information contained on the sites.

As you can see, it is quite possible to extend the life of an old computer (laptop or desktop computer). At the same time, you can prolong the joy of owning them if it gives you pleasure.

P.S. The article is over, but you can still read.

In an attempt to save money on purchasing household appliances, many have wondered whether a monitor can be used as a TV without additional costs? Considering current prices for equipment, the question is more than relevant. And why spend money on buying a separate TV for the garage or kitchen when you can use an old monitor standing idle?

Information Security

Today, a person’s entire life is “believed” around information flows:

Data can be obtained by simply turning on the TV.
Information comes in an endless stream from the Internet, from news sites.
Print media have faded into the background and provide only background “information noise.”
Even grandmothers at the entrance are no longer discussing the prices of vegetables, but geopolitical problems.

Rapid changes in environmental conditions force a person adapt to change. And what to do when these changes occur ten times a day, with new news from all over the world? The body is not adapted to such emotional stress; our ancestors learned about all changes very late and were rarely interested in events on the other side of the globe. And we constantly have to do this in order to “keep our nose to the wind.”

There is only one way out of the situation: don't take everything to heart, isolate yourself from the endless flow of data and give your consciousness the opportunity to take a break from all this cycle for at least a couple of weeks.

Monitor as a TV

The most difficult moment - using an ordinary monitor as a TV. Take the time to see if you bought a monitor with a built-in video decoder. The probability of this event is not very high, but it exists.

By and large, it is the presence of this decoder distinguishes the TV from a regular monitor. But at home you won’t be able to solder a board to such a device; you’ll have to order it online or look for it in the nearest parts store. You should not carry out the replacement yourself; it is very easy to do something wrong and only completely ruin the monitor.

It is best to bring it to your friends for service along with a new board and pay for the work of specialists. The very next day you can pick up yours now TV. And it will cost much less than buying a new plasma.

The monitor can still be connected to the system unit via connectors.
You can use an antenna or cable to watch TV channels.
The quality of the picture depends on the screen resolution.

There is still an easy way - buy external or internal TV tuner and connect to any monitor. And here in front of you is a full-fledged TV. In essence, the purchased device replaces the board with the decoder. But it can be connected to any monitor, and this is a significant advantage. But you will have to overpay significantly in terms of money.

How to use a laptop as a monitor?

You can connect your laptop to a monitor using it in a similar way. Directly connect it to the system unit, bypassing the monitor, will not work. There are two options:

But in both moments there is nuances:

By connecting the cable, we, by and large, bypass the system unit. It turns out that it is not the laptop that is connected to the computer, but the screen to the laptop. And we can only use the data that is on the laptop’s hard drive.
In the second case, you may encounter even more problems. You can't run programs without a working monitor. They are synchronized over the Internet, so both devices must have a stable network connection.
Connect a laptop directly to a personal computer impossible. Essentially, this would be a combination of two autonomous systems.

How to use TV as a monitor?

Plasma TV hanging on the wall for several years can be used as a monitor:

It is enough to inspect it for the presence of the necessary connectors.
Standard VGA or HDMI will do; these two ports are found on almost every modern TV and every video card.
All that remains is to find a cable with which you can connect the system unit and the plasma.
The system will not require installing drivers or anything like that.
If the TV is connected in parallel, along with the monitor, you should pay a little attention to the settings.
Everything about screen resolutions is intuitive - select a monitor, adjust the resolution and make it the main one.

Now you can display any image on the big screen. Some retro games will look especially epic in this resolution. To turn off the plasma, just remove the cable and you can watch your favorite TV channels again.

How to watch TV channels from a monitor?

To use a monitor as a TV, you just need to get TV tuner. You can connect it via a VGA connector and enjoy the available TV channels. If you don’t want to spend money on a new device, you can simply replace one single board with a video decoder.

In reality this may be more difficult than in words. So if you are not particularly strong in technology - take the monitor to specialists, they will replace anything for a modest fee.

Although we turned the monitor into a TV, after all these manipulations it did not lose its original functions. You can connect it to your system unit or laptop at any time; there’s nothing complicated about it.

Some are still wondering whether the monitor can be used as a TV, while others are already enjoying their savings. To experiment with technology better not to resort if you are not sure that you can return everything “as it was before.”

Video tutorial: making a TV from a monitor

In this video, Timur Bogomolov will show and explain in detail how he made a full-fledged color TV from a monitor:

Before making a TV out of a monitor, it’s worth understanding why this need arises.

As a rule, such a modification may be necessary for the owner of an old one who needs an inexpensive TV receiver for his dacha or kitchen.

There are many ways to solve the problem - from buying a special tuner or set-top box to connecting to a TV with access to .

Features of using a monitor as a TV receiver

The solution to the problem of converting a monitor into a TV is usually associated with liquid crystal models.

However, if we are talking about integrating special boards into the case, the best option is a CRT monitor, which allows you to conveniently place all additional parts inside the case.

When using an LCD monitor, there are more ways to receive a television signal on the screen, however, in most cases, all elements will have to be placed outside.

The benefits of turning monitors into TVs include saving on the purchase of a new TV receiver if you have an old and unused monitor.

At the same time, this process has much more disadvantages:

The viewing angles of LCD monitors are narrower compared to TVs. You can only watch it sitting directly in front of the screen, which reduces the possible number of viewers.
Older monitors typically range in size from 15 to 19 inches. They are only suitable for a small room - even for a bedroom it is easier to buy an inexpensive 24- or 32-inch TV.
The image quality of most older monitors is worse than that of television receivers. Especially if the device has been used for many years, and its matrix has lost some of its characteristics.
Almost all of them lack speakers, which requires connecting additional external ones.
To remake a monitor, in some cases you will need some experience in repairing electronic equipment. If it is missing, you will have to contact the service.

On the one hand, converting a monitor into a TV is not always easy.

You will have to spend some time on this (during which you could simply earn part of the amount for a TV receiver), the resulting picture will turn out worse, and you may need a decent amount to purchase additional parts.

However, the costs are still less than what it would cost to purchase a TV, and some methods require virtually no investment or effort on the part of the user.

Monitors suitable for conversion

A good option for use as a TV for the kitchen or garden are monitors with a diagonal of 17–19 inches.

This opinion is expressed by both experts and amateurs who have already managed to convert a peripheral device for a personal PC into a television signal receiver.

The quality of these particular models is higher compared to the products of other companies, and they are relatively easier to remake.

More modern monitors with a diagonal of 20 inches or more can be converted into a TV, but it is not economically viable.

Firstly, they are quite suitable for use for their main purpose - to display images from a PC.

If there is no need for a monitor, you can even sell it, compensating part of the amount for the purchase of a TV.

The best option is color CRT monitors with a diagonal of 15 to 20 inches or more. But only if they have retained their color rendition and clarity.

It is better not to remake models with a cloudy and dim image, but to throw them away, preserving your vision.

Connecting a set-top box

One of the simplest, at first glance, ways to make a TV from a computer monitor is to purchase, connect and configure a special one.

Although there is practically no point in choosing models that support analogue broadcasting - by the beginning of 2019 they are going to completely replace it with digital.

This means that the best option would be to buy a DVB-T2 or model that works when connected to the Internet.

DVB-T2 set-top boxes

The advantages of choosing this technique for turning monitors into TVs are:

Affordable price. A suitable option can be found for less than 1000 rubles. (for example, the Hobbit UNO model supporting the FullHD format will cost only 850 rubles);
Easy connection and compatibility with popular connector, which can be found on most LCD monitors released in the 2010s.
Support more than 20 channels. If there is a need to increase the assortment, buy DVB-C set-top boxes for cable TV or DVB-S for satellite TV.

If the old monitor does not have an HDMI port, the problem can be solved by purchasing a special adapter - this increases the cost of remodeling, but in this case there is no other way out.

The issue of missing sound from the monitor is resolved by purchasing and connecting to a set-top box.

However, some modern models are equipped with built-in, albeit weak, speakers.

Smart TV set-top boxes

“Smart set-top boxes” for TV can also be connected to monitors.

Devices such as Mini PC Smart TV Box MXQ 4K Android costing about 1,500 rubles. will provide not only TV broadcasting via the Internet, but also the ability to record video on the built-in storage device.

This model has a ROM size of 8 GB– enough to save from 1 to 4 standard size movies, depending on the selected format.

In fact, most smart TV boxes are mini computers designed specifically to connect to your TV.

All that is required for such a gadget to work with a monitor is the presence of an input or a special adapter to another connector.

The advantages of choosing this option include:

Most smart set-top boxes are equipped with slots for installing cards, which allows you to increase the storage size for recording videos and other files.

Although they cope well with the main task - to ensure the display of TV channels.

The few disadvantages of choosing this option of turning a monitor into a TV include the weak sound of the built-in speaker of such models - although you can additionally connect audio speakers to them to increase the volume.

Purchasing a special board

The most difficult at the very beginning, but easy-to-use way to make a TV receiver from any monitor is a built-in Universal LCD Driver Board type board.

Equipment may have different names depending on the manufacturer.

However, the principle of operation, advantages and connection steps for most of these devices are the same.

The advantages of using boards include:

the ability to play not only analogue broadcasting (which will soon cease), but also digital one;
sound output without the use of additional adapters;
control the gadget using the remote control;
compactness of all parts used for alteration, which are easily hidden in the monitor body.

The disadvantages of this option include problems with placing the board in the majority of cases.

An experienced specialist can solve them. Most non-professionals may not be able to cope with this, and then the board will have to be placed outside, which will make the appearance of the monitor not very attractive.

Stages of turning a monitor into a TV receiver

To embed the board into a monitor, you will need to complete the following actions:

Prepare all the necessary tools and materials - a screwdriver, a soldering iron, a pre-purchased board, wires and cables, solder.

Remove the cover from the monitor by unscrewing all the fasteners and carefully placing them in one specific place so as not to lose them before the assembly is completed.
Find the expansion board, disconnecting it from the cable and being careful not to damage it. A damaged cable will make it impossible to continue further modification of the monitor. Moreover, the device will stop working even as a computer display.
Check the markings of the screen matrix, which will help you, if necessary, find the appropriate firmware for the device and select the correct voltage for it.
Install a new one instead of the standard one. During the soldering process, the pinout of the display cable must be observed.
After securing the Universal LCD Driver Board, use the jumper to set the appropriate voltage, which can be found in the instructions for the board. Typically 12V is sufficient, a value that is suitable for most monitor components.

Most of these boards are equipped with IR receivers for remote control, some of them support this function as an option.

Before assembling the monitor, you should make sure that the sensor is turned on and determine its location - sometimes the infrared module can be located outside, mounted on the case.

The last stage is back and putting it into operation.

Making a TV from a laptop display

A TV can be made not only from a standard monitor for a desktop PC, but also from a laptop display.

To do this, you will need to buy another board, LA.MV29.P, and a controller suitable for it. Most display conversion activities coincide with monitor conversion.

The list of differences is as follows:

Depending on the device model, the voltage can be 3.3, 5 or 12 V.
During the installation process, the jumper on the controller is switched and it is flashed using a special one.
It is impossible to place even the most compact board inside the case containing the display matrix.

The disadvantages of this method of converting a display into a television receiver are its small size.

Laptop screen diagonals are usually in the range of 14–15.6 inches, although laptops can be 10.1-inch or 17.3-inch.

In addition, to accommodate the resulting structure (screen and board) you will need a new, specially made case.

Connecting other devices

Mobile devices that can be connected to the monitor to increase its functionality are not only special set-top boxes.

For the same purpose, you can use a tablet or smartphone on the platform.

But, if gadgets are connected to a modern TV receiver using Wi-Fi, they can only be connected to a monitor using a cable.

To use this method you will need:

A mobile device with at least 512 MB of RAM (at least 1 GB is required for normal HD video playback).
Adapter from microUSB (or other port on a tablet or smartphone) to . Some tablet PCs are already equipped with mini/microHDMI inputs; smartphones have practically none.
Drivers and codecs installed on mobile gadgets.
TV broadcasting configured using a special application or website.

Should know : Even models with broken screens, but capable of displaying an image on the monitor, are suitable for work. Therefore, almost any mobile gadget and monitor with an HDMI port can be turned into a TV receiver. If there is no suitable connector, the adapter will not help, since it does not allow sound transmission.

In addition to smartphones and tablets, other gadgets can provide connection to TV channels, including laptops and mini-PCs on any operating system (not necessarily Android, as on a TV set-top box - the platform can be Linux or one of the versions of Windows) .

With their help, the old monitor turns not quite into an ordinary TV, but into a set comparable in functionality to devices that support Smart TV.

The advantage of computer symbiosis is the ability to use gadgets for their main purpose (for calls, work or games).

The disadvantage is the increased power consumption, maximum occupied space and a large number of cords.

However, in any case, it is advisable to buy a normal TV for an apartment, and such a system is suitable for a summer house or temporary options.

Summarizing

You should not throw away an outdated monitor, even if you cannot use it to display information from a computer, give it to another user, or sell it.

The device is quite capable of serving as a spare TV - for this you will need to invest a certain amount of money and, possibly, make small changes to the electrical circuit.

Other gadgets that you don’t even have to buy will help you solve the problem of increasing the functionality of your monitor.

There are situations when we need another TV, but we cannot buy it for many reasons. Then the question arises: can the monitor be used as a TV? Or is it possible to connect a TV set-top box to the monitor?

If you have an old computer monitor, then it is quite possible to use it as a TV. This transformation is achieved in several ways. The simplest of them, as you may have guessed, is connecting a monitor to a TV set-top box. You don't need a system unit, keyboard, mouse or various cords for them. You need nothing more than to connect the monitor to the digital TV box directly and use it only as a TV screen.

Connecting the set-top box to the monitor

Purchasing and connecting a DVB-T2 set-top box to a monitor is a reliable way to miraculously transform a computer display into a television receiver. Modern displays, like televisions, are equipped with built-in speakers and are practically self-contained devices. But if you have a regular monitor (perhaps even a lamp one), then you will need separate speakers - you will connect them to the corresponding connector on the DVB-T2 decoder. It would be great if they had stereo sound. If desired, you can purchase speakers with a remote control.

An external digital set-top box is an independent device that connects to the electrical network, television antenna and monitor. It is controlled using a remote control, just like a regular TV.

The situation with DVB-T2 receivers is such that the manufacturer did not intend to connect them to computer monitors, but only to televisions. At the same time, new monitors, like modern television receivers, are equipped with an HDMI connector, which is present on set-top boxes, while older ones can only be found with VGA and DVI-D.

The options for connecting it to a digital television set-top box will depend on what connectors you find on the display. The following combinations are possible (see table).

How to connect a TV set-top box to a monitor

If you already have a free display, and you want to purchase a set-top box for watching TV, then pay attention to a hybrid digital TV tuner, equipped with both VGA and HDMI slots. If the design additionally includes “tulip” sockets where you can connect speakers, then you are simply lucky: you are the owner of a universal device that is compatible with various models of television equipment.

But what if you got a connection option with mismatched interfaces? Special adapters will come to the rescue, which are available for sale in any radio electronics store or on a well-known Chinese trading platform. As for the latter, you can find the most unexpected combinations of adapters there. Some converters, being a full-fledged device with a board placed inside, require power supply. A feature of others is the need for a separate audio signal output using an extension cable.

Another way to connect an old monitor to a digital set-top box is to use YPbPr or SCART sockets that work with an analog signal. To do this, you will need a signal converter from AV to VGA format.

Pay attention to such a characteristic as the length of the connecting cable. Surely you know how the length of the antenna coaxial wire affects signal attenuation. So, the cables connecting the displays to the T2 decoder have their own requirements:

VGA – no longer than three meters;
HDMI – no longer than five meters;
DVI – not exceeding ten meters.

If, after connecting all the cables (don't forget about the antenna) and connecting the devices to the network, the screen is blank or an error message appears, then this indicates problems with one of the devices or cable incompatibility.

Connectors and ports of TV set-top box

To understand which sockets are used to connect a DVB set-top box to a computer monitor, you need to become familiar with the types of connectors that this type of gadget is equipped with. It is noteworthy that depending on the class of the monitor and the year of manufacture of the console, the set of connectors may differ. So take a close look at the back of your devices.

Antenna connector

Previously, it was the most important thing in our television receivers: an analogue television antenna, video player or satellite television tuner was connected to it. Today it is used to receive digital terrestrial television using a classic external antenna.

HDMI

The HDMI multimedia interface is the most significant functional connector. It is responsible for simultaneous transmission of digital video and audio. Sharing media does not result in loss of picture or sound quality. It is good, regardless of the connected devices, such as a monitor, camera, camera or player.

Euro/Scart

Thanks to it, outdated devices are compatible with more modern equipment. This is especially true if there is no HDMI connector. This connector has been in use for many years, but will soon become a thing of the past.

USB

USB is a connector that allows you to connect equipment such as a camera, webcam, flash drive, MP3 player, and even a smartphone. The USB input is determined by the version standard: the higher it is, the faster the transfer of multimedia from devices to the TV screen. Later receivers have a USB 3.0 version. Today, the USB connector is the main parameter of any TV.

VGA

VGA provides video transmission from external devices to the TV, such as images from a monitor to the TV screen. The connector is useful for older equipment that does not have an HDMI input (laptop or computer). VGA then ensures device compatibility, allowing images to be transferred.

DVI

DVI technology replaced VGA and was developed for connecting image display devices; the connector does not transmit an audio signal. DVI and HDMI connectors are mutually compatible and can be combined with each other using appropriate adapters.

Memory card reader

It is used to display multimedia on the TV screen of portable memory cards. More and more manufacturers are offering this alternative and convenient solution - it is faster to use the reader directly, bypassing the USB port.

Ethernet/LAN

The Ethernet/LAN connector or local area network is the main function that provides the TV connection to the Internet. Thanks to it, you can use a wired connection to access search engines, applications, services and all the online tools that are included in Smart TV.

Component input

Component input allows you to send high-resolution analog images from other equipment directly to the screen you are viewing.