How to make a phone case from a cover. How to sew a phone case with your own hands: detailed master classes. Materials for creating a protective case
Today, although the choice is large, the range of phone cases that the market of mobile phones and accessories offers is usually quite monotonous. How you want to not be like others and distinguish yourself with something original! In this case, you can do it yourself. All you need is a little imagination, perseverance, perseverance and the simplest means at hand. Here are some examples of what you can do with your own iPhone case.This is one of the easiest ways to create an original iPhone case with your own hands. These rivets can be easily ordered online. Moreover, they can be found in any hardware and sewing supply store. They can be attached to a case with a ready-made decoration on it, or you can use your own personal design. In fact, here the imagination is limitless and you can come up with any pattern or ornament that will look good, lined with rivets like this. They can be glued to a hard plastic case or screwed onto a bendable rubber case. But in any case, such rivets look very stylish, solid and fashionable, so you can’t go wrong with them. Space print always looks very beautiful and somehow even slightly mysterious. Not everyone has the courage to use it in their wardrobe, but there is a wonderful opportunity to use it on such a small but very important detail as an iPhone case. In fact, this is an ideal opportunity to apply it without too much effort and effort. All you need is nail polishes... By the way, we have found a use for old nail polishes that don’t apply well anymore and it’s a pity to throw them away. In addition to them, you will also need an old sponge, which you don’t mind cutting into pieces. Using pieces of sponge, you will need to place multi-colored “stars” on the previously applied sky background. White paint and a very thin brush will also help to “drip” small stars.
These are the simple ideas that will help you create an absolutely original and unique iPhone case that no one else has. Be different from others. Do it yourself!
It's the twenty-first century, and telephones have ceased to be a simple means of communication. Nowadays gadgets are an integral part of life, and for many they are also an important accessory that should demonstrate the uniqueness of the owner.
In such conditions, it may be difficult to emphasize your individuality through the purchased case. To do this, you can figure out how to make a case yourself.
Ideas and general information
If we talk about DIY case ideas, then here you have simply a huge amount of room for maneuver. This is because it is not at all necessary to do it completely yourself, because you can simply start improving it, both visual and functional.
Today we will look at the most popular and interesting ways to customize a purchased case and create a new one with your own hands.
Upgrade of a purchased case
If you decide to change the appearance of your phone, and you are almost completely satisfied with the existing case, you should not give it up and look for something new.
It’s not for nothing that they say that everything new is well forgotten old, because with a little effort you can breathe a second life into your phone case.
Drawing on the case
To begin with, you can create your own design or ornament on the surface of the case. Both simple markers and special paints, which will depend on the material of the case, are suitable for this.
In different situations, both color and monochrome drawings will look great. At the same time, you shouldn’t create frames for yourself, because we can either make a simple outline and paint over the inside, or make a simple minimalist drawing, which should, first of all, please the owner – that is, you.
Nowadays, drawings with silhouettes and faces of girls have gained particular popularity; it is now difficult not to come across photos of them on the Internet. In fact, now it has become a whole line of business - the production of handmade covers.
Stickers on the case
As you understand, the matter is not limited to patterns and designs. Volumetric coatings also have a right to life. These can be paints with larger fillers, or you can stick on individual elements that will make up the overall picture.
Almost anything that can be stuck on a phone case is suitable for this, from simple rhinestones to various pendants and figures with a flat base.
This practice will work well with almost all types of materials. Depending on them, it is better to combine them: natural materials such as metals are well suited to wood, while in tandem with plastic it is better to use inserts made of a similar material or other light substance.
It would be best to choose for this some little things dear to your heart that will warm your soul every time you pick up the phone and look at it.
The same category includes simple sewing rivets, which can be bought both in specialty stores and found online. Such small components can make very interesting and entertaining pictures; it is only important to place and combine them correctly.
If you delve into the master class on how to make a case from materials that need to be glued, then it’s worth remembering simple sparkles. We are talking about small ones, which can also be easily pasted, and at the same time get an interesting picture.
To do this, you will need simple decoupage glue, which we will use to paint the base of the picture, after which we will need to scatter glitter over the entire surface of the cover, which is smeared with an adhesive base.
Any excess that ends up on the cover will be easy to shake off or blow off, leaving a fairly light picture that will stick very firmly to the surface of the cover. For better results, it should be degreased initially. Simple alcohol or another similar product is suitable for this.
Paints on the case
If you draw well and have simple watercolors, then your horizons become even wider. To do this, you will first need to prime the surface of the case with glue.
To do this, you need to decide on the design that you are going to apply, and this is best done with a simple sheet of paper, which can be easily applied for comparison with the phone.
If you draw well, but always have problems with ideas, find something on the Internet, print it, and then you can transfer the image to the case.
Gradient
If you are interested in more complex paintings and images, then using a gradient is for you. By using this technique to decorate a case, you can get a unique picture, which will depend only on the steps you choose and their number.
To do this, you will need to apply one layer to the surface of the case at a time. After it has completely dried, you can proceed to the second step, and so on as many times as necessary to implement your idea.
Similar solutions can be easily found on the Internet, and this works well not only with simple color combinations, but also with more complex images, such as paintings and portraits.
Making a case yourself
If the option of improving the existing case does not suit you, then you need to figure out what you can use to make an original case that will delight you.
If you are good at knitting and crocheting, you can knit a cover for yourself. This solution is suitable for those who carry their phone in a case, rather than just putting it on the case.
There are simply unrealistically many options for the visual execution of such an idea. Experienced knitters do not need to be told about the variety of solutions in this area. In addition, it will be possible to add all sorts of fasteners, buttons and almost everything that was described earlier to an already knitted case, thereby refreshing it from time to time.
In addition, this option may be just the ideal solution if you want to make a cover for a child. If this might have sounded strange fifteen years ago, now children buy their own phones before they understand the multiplication table. Since this is a very young age, it would be better to start from the interests of the child, this applies to both themes and colors.
Textile
If you don't like to knit, and reject any instructions for making a cover this way, then you can turn your attention to simple sewing. It must be said that this method has gained more popularity than the previous one, due to the variety of materials for manufacturing.
In order to make such a case yourself, you will only need to find a piece of suitable material. A few more details can be added to it depending on preference.
When making a cover like this, you can take two separate pieces of fabric, or you can take one, which will later be folded. In terms of implementation, the second option is better suited, and it can be implemented in different ways: horizontally and vertically.
In the first case, the bottom and side edges will be stitched, while in the second, only the side edges. The latter is more convenient and reliable, because you won’t have to worry about the threads on the bottom breaking or stretching, which could cause the phone to fall out.
In addition, if you decide to make a more complex case that will be a little more convenient, a vertically folded piece of fabric will help you conveniently install a drawstring - a piece of fabric or lace that will help you remove the phone from the case. It is best to attach it while the fabric is still laid out, and only after that fold it and sew up the edges. This part can be sewn on, or you can make a loop on it, and sew a button inside the cover, to which it will be attached.
After finishing the work, you can move on to additional decorations that will be placed on the outside of the case. All sorts of stripes, buttons and rivets work well here.
Beads
Your creative inclinations and abilities may be slightly different from the ways I described above. If you are a huge fan of beads and everything you can do with them, go ahead.
The most interesting thing is that using this technique you can either create a complete cover or decorate an existing one, this is especially true for knitted and sewn covers. This is a very original and interesting way that should not be neglected.
A special case that prevents cracks and micro damage will help extend the service life of the phone. Today, stores offer a large selection of different models.
Most of us love unusual things that help us stand out from the crowd.
A large number of interchangeable covers and panels helps to diversify the design of a mobile phone.
Buying the necessary accessory is quite simple. It’s another matter to do it yourself from a variety of available materials.
Here you can emphasize your individuality and refined taste. Our material presents several ways to create a case with your own hands.
Materials for creating a protective case
How to make a case with your own hands? Everything is quite simple. The main requirement of the whole process is the availability of free time and good imagination.
Various materials can be used to make the accessory:
- felt;
- jeans;
- silicone film;
- wide elastic band;
Soft base materials protect your mobile phone from daily abuse. There are no scratches or cracks on the surface of the glass.
Tools for making a mobile accessory
These include:
- sharp scissors;
- ruler;
- button;
- glue;
- ribbon or long lace;
- sticky base.
When working with each material, it is necessary to take into account its properties. For example, felt does not fray at the edges when cutting out parts, while denim requires additional border design.
Silicone film does not like frequent exposure to a sharp needle. To do this, you need to use glue that dries in a few seconds.
The process of creating a phone case
The initial stage of creating a case is the preliminary creation of the design of the future accessory. To do this, you can draw a sketch of the product on paper. It is important to consider the size of the phone, as well as the placement of the camera and microphone.
The finished case should be slightly larger than the size of the mobile phone. This will allow you to easily pull it out whenever necessary. Fabric accessories do not require specific sewing skills. Here you need to carefully sew two parts together.
The process of creating a case is divided into several stages:
- Cut out paper patterns.
- Transfer them to the material from which the cover will be made.
- Carefully cut out each piece, leaving 1 cm for seams. This technique allows you to sew the correct product, taking into account the parameters of a particular model.
- To join felt and denim, you will need a sharp needle and strong thread.
- Specialized glue will help you make a silicone phone case.
- When all the parts are connected to each other, you can fix the protective button, which will prevent the cover from constantly unfastening.
For people leading an active lifestyle, you will need a sports phone case. Thanks to the thick elastic band on the forearm, it fits well on the human body.
To do this, a small piece of thick elastic is sewn to the finished protective product. As it moves, it will press the mobile body tightly against your hand.
Note!
The design of the phone book case is a cover. The mobile phone case is fixed to one side, and the other part serves as a protective panel. A tight fit of the upper part of the cover will be ensured by small magnets that are fixed in the upper corners of the cover.
You can make additional sections for storing plastic cards using a multi-layer fabric structure.
To do this, you will need three fabric bases, which differ in size.
The first part of the pocket is sewn to the base of the cover. All other elements are sewn together and fixed to the previous parts of the cover.
Decorative elements will help you create an exclusive design for your phone accessory. Fabric appliques will add zest to your product. You should not use multi-colored details to decorate the case.
Note!
DIY phone case photo
Note!
Today, stores sell a large number of cases for smartphones, but when it comes time to choose a product for your phone model, there is no suitable one or there is little choice. That is why we advise you to familiarize yourself with the options and ideas on how to make a case.
Everyone wants to be unique and stand out from others, so our instructions will help you create a beautiful and comfortable case for your phone.
Paper case
The simplest and most budget option, which can be assembled very quickly using the origami technique. Of course, you shouldn’t expect a long time of use, but if you need to protect your phone here and now, then this option will be perfect.
For assembly you will need an A4 sheet of paper and PVA glue. You need to fold the phone into paper so that you end up with an envelope. For reliability, you can glue the joints and bends so that the cover holds better.
Hot glue
What can you make a phone case from? From hot glue. This approach will allow you to create your own pattern as you see it. All you need to make is a glue gun with glue, nail polish, tape and parchment paper.
The first step is to wrap the phone tightly in paper and glue the seams on the screen. On top of the paper, it is important to mark the sockets, connectors and control buttons, then use glue to glue it around the perimeter of the phone, and then smoothly move on to the patterns on the back of the smartphone so that the structure is solid. When the product is dry, you need to remove it and paint it in your favorite color.
Book
Such phone cases can be made of leather and fabric, but we will consider a simpler model that can be upgraded if desired. To create, you will need a notepad with an elastic band, suitable in size for the phone, a stationery knife and ruler, a pencil, glue, felt, cardboard and an eraser.
It is necessary to cut out sheets from the notebook and prepare it for further work. The next step is to glue the felt along the entire inner surface of the notepad. Next, you need to glue rubber bands on the top and bottom of the notepad, where the smartphone will be attached.
It is necessary to make this as tight as possible so that the device does not slip out. If desired, the notebook can be decorated or left as is, in which case at first glance it will seem that it is actually a notebook.
Felt
Now we’ll learn how to properly sew a phone case. Production does not require many materials, and the work does not take much time; moreover, the cover comes in the form of a pocket.
So, for production you will need felt, you can take different colors, a needle, a ruler, scissors, thread and a glue gun. You need to place the phone on the fabric and mark the edges, and then cut it out with 1 cm indentations on each side.
When two such blanks are ready, they must be sewn together with an outer seam. When finished, you can decorate the case or attach a clasp to prevent the phone from flying out of the pocket.
Fabric cover
Knitting and weaving fabric covers with your own hands is also common, so you can make such a product literally before your eyes. To do this, you need thick fabric, threads, a needle, acrylic paints, colored paper, scissors, glue and a stencil.
First, you need to cut two identical blanks from fabric according to the size of the phone with free edges. On one side you can draw a design that will appear on the back cover of the phone. You can use cardboard to make an elastic frame from the back of the phone.
When all this is ready, you need to sew both halves together from the inside out, and then turn the cover out. You can see photos of similar handmade smartphone cases in the article.
In this article we looked at several master classes on do-it-yourself smartphone cases. You can always add to them or come up with your own version based on the instructions provided.
Note! 
A case can be made from literally anything that is at hand, you just need to use your imagination. Moreover, such cases can be presented as a gift, which is always needed. We wish you creative success.
Photos of DIY phone cases
Note! 
Note! 
We present to your attention a selection of creative ideas with step-by-step master classes for making phone cases with your own hands.
Mobile phone case made of paper using origami technique (budget option)
You will need: a sheet of A4 paper of any color, PVA glue.
Master Class
- Lay a sheet of paper horizontally.
- Place your phone on top.
- Wrap the phone to the end of the sheet.
- Fold the bottom of the paper up to the phone several times.
- Fold the triangles at the bottom of the sheet up.
- Secure the folds with glue.
You will need: elastic bands of 3 colors in the amount of 500 pieces, a hook, a weaving machine (it should have 2 rows: the holes in the bottom row should face to the right, and the top ones – to the left).
Master Class
- Slide the elastic bands from the top row of the second pin, then cross them onto the third pin of the bottom row.
- Place the elastic bands crosswise, from the second pin of the bottom row to the third pin of the top row.
- Place the elastic bands in the same way from the third pin of the top row to the fourth pin of the top row. You should get three crosses.
- Pass two pins through the center and weave four more crosses in the same way. You should get four crosses and there should be two free pins left at the edges of the machine.
- Place rubber bands on the top and bottom pins of the next row, facing oppositely. In the same way, put rubber bands on all the pins of the previous row.
- Turn the machine vertically towards you so that the top pins are facing you with their heads.
- Place the first elastic band on one bottom and one top without crossing.
- Attach without crossing the remaining elastic bands along the top row - one after the other, without missing the two middle pins.
- Make the bottom row in the same way, connecting with an elastic band on the other side.
- Using a crochet hook, remove two rubber bands from the bottom row of each pin.
- Skip the middle pins, there should be two rubber bands left on each pin.
- Take elastic bands of a different color and make the next row in the same way as the third.
- Remove the two bottom loops in a circle and again put on elastic bands of a different color in a circle, then remove the bottom loops.
- Make two rows in the same way, alternating colors. (For one row, put the loops on once, then remove).
- Make a hole for the screen in this way: turn the machine vertically, the bayonets of the left row should be facing you. Remove the bottom elastic from the third pin of the left row and place it on the fourth. The last loop should cross over to the seventh pin.
- Remove the remaining loop from the middle five pins. There should be three pins left with rubber bands on each side.
- Knit the next row in this way: start from the third working pin to weave elastic band by elastic band clockwise. Leave five pins on one side.
- Remove the bottom elastic bands, there should be two loops on the pins.
- Knit another eleven rows, alternating colors in the same way.
- Knit a row clockwise, filling all the pins.
- Remove the bottom elastic bands from the pins, but do not remove the five ones that were not used before.
- Skip the two working pins in the row where the unknitted pins are, slip the lowest stitch off the third pin and place it on the next pin. Do this until the last two pins are empty. Knit one row.
- Take the machine vertically, remove the bottom loop from the right row of the second working pin and put it on the next bayonet. The last loop should be placed over the fourth working pin.
- Remove the bottom hinges from the third and second pins.
- Place the loops in a circle, leaving the two pins empty, then remove the bottom loops.
- Slide the elastics onto the next row using all the pins. Remove the loops and do not touch the pins, which have two elastic bands.
- Swap the top and bottom loop on the first pin, transfer the top loop to the next pin. Connect the structure.
- Remove one bottom loop from the next two pins and transfer them to the next pin.
- Knit a row in the usual way.
- Close the cover this way: make a row of crosses as in the beginning, using all the pins. Make the next row between the opposite pins in crosses.
- Remove the bottom loops and leave the elastic bands used to make the figure eights. There should be three loops left on the bottom pin.
- Place the bottom loop of each pin onto the next pin. Make the next row in the same way.
- Make a knot with an extra elastic on the right side, then remove the cover from the machine. Hide the knot and straighten the protruding loops, and then put the case on the phone.
Hot glue mobile phone bumper case
You will need: glue gun, nail polish, tape, parchment paper.
Master Class
- Take parchment paper and cover the phone so that the back panel and side panels are seamless.
- Secure the joints with tape in the screen area.
- Mark the places where the camera, sockets and buttons are located.
- Apply hot glue to the sides of the phone, then outline the designated areas.
- Make a pattern on the back of the phone so that the pattern connects to the side of the phone.
- Wait until completely dry.
- Apply your favorite color of nail polish and color in the pattern.
- Wait until completely dry.
- Put a case on your phone.
Balloon mobile phone case (budget option)
You will need: balloon of your favorite color.
Master Class
- Take a balloon, inflate it and do not tie it.
- Place the phone screen side up on top of the ball.
- Press the phone into the ball, gradually deflating it.
- Release the ball when there is little air left and continue pressing the phone into the ball.
- Wait until the ball covers the phone, this is a sign that the case is ready.
You will need: a notepad with an elastic band to the size of your phone, a stationery knife, a ruler, glue, felt, a pencil, cardboard, a narrow rubber band.
Master Class
- Cut out the sheets and sides of the notebook using a utility knife.
- Divide one side of the notebook in half, marking with a pencil.
- Cut along the line to the outer grain of the notebook cover using a stationery knife, then cut a strip half a centimeter wide in this place for the future fold.
- Glue the inside of the notebook cover.
- Trace the notebook cover onto the felt and cut it out.
- Place the felt on the inside of the notebook cover, then cut the felt along the side fold.
- Glue a felt blank to the notebook cover.
- Outline the phone on a piece of cardboard, then cut out the blank.
- Glue the cardboard to the felt and cut it to the desired shape, leaving a centimeter from the cardboard.
- Cut two corners of the felt on each side, then glue the corners.
- Glue two elastic bands across this blank.
- Glue the blank onto the folded outer half.
- Put a case on your phone.
You will need: a sheet of cardboard of any color, scissors, glue, marker, eraser.
Master Class
- Draw the phone twice on cardboard at a distance of half a centimeter and cut it out.
- Make two folds along the lines in the center of the workpiece.
- Glue one side of the case to the back cover of the phone.
- Attach a thin elastic band to the case so that the case can be closed.
You will need: felt of any colors, needle, thread, glue gun, scissors, ruler, pencil.
Master Class
Fabric mobile phone case
You will need: thick fabric, thread with a needle, acrylic paints, colored paper, scissors, glue, stencil, ruler.
Master Class
- Measure the dimensions of the phone, use a stencil to cut out two identical blanks with wavy edges.
- Draw SpongeBob's face on one blank.
- Make a sponge outfit out of colored paper and glue it on.
- Sew the pieces together from the wrong side.
Leather mobile phone case
You will need: leather of any color, scissors, clips, thick thread, cardboard template, pliers for installing eyelets, two gypsy needles for decoration (two aiglets, decorative thread), pen, ruler.
Master Class
- Measure the dimensions of the phone, add a centimeter to the length, and two to the width, remember the parameters.
- Make two identical leather blanks with the required parameters.
- Round the corners of the workpieces.
- Make round small holes on the cardboard template with a spacing of 5mm.
- Fold the leather blanks with the insides facing each other and attach the template.
- Use tongs to make holes along the bottom and sides. Secure the template with clamps.
- Place two needles on the thread on both sides.
- Sew from the side in this way: go through the first hole with one needle, straighten the thread, then sew in turn with two needles, pulling them into one hole, but in different directions.
- Sew the entire cover, then fasten the thread several times.
- Make two through holes with a distance of a centimeter on the top of the cover.
- Place eglets on the ends of the decorative thread.
- Thread decorative thread through the holes and tie a bow.
You will need: yarn, scissors, glue gun, tape, parchment paper, ruler, baking paper.
Master Class
- Wrap the phone in parchment paper.
- Secure the folds and seams with tape on the screen side.
- Make a base on the back of the phone using a hot glue gun, covering the entire back and side with hot glue except for the camera and microphone openings.
- Wait until it dries completely and remove the base from the phone.
- Wind the thread parallel to the ruler, taking into account the width of the phone.
- Apply glue to one edge of the ruler and glue it to the base.
- Wait for it to dry completely and cut the thread along the opposite edge of the ruler, then cut the thread from the skein.
- Fill the entire cover with fibers of yarn, leaving 5 mm between rows.
You will need: beads of any colors of the same size, glue gun, toothpick, cardboard.
Master Class
- Place some beads on the table.
- Apply a bead of hot glue to the cardboard.
- Dip the tip of a toothpick into a drop of hot glue.
- Touch the toothpick to the bead.
- Dip the bead into a drop of hot glue.
- Glue the bead to the phone.
- Glue the rest of the beads on the back and side covers of the phone in the same way. Please note that the work is painstaking and will take a certain amount of time, but you need to work at a pace, since hot glue hardens quickly.
You will need: rivets (to cover the entire phone you will need 80 rivets, partly as in the picture - 31), glue gun, cardboard, tongs or tweezers.
Master Class
- Prepare the rivets by placing them with the sharp part facing up.
- Take the rivet with tweezers.
- Apply a small bead of hot glue to the rivet.
- Glue the rivet to the phone.
- Glue all the rivets in this way.
You will need: cosmetic glitter, brush, hairspray, clear nail polish.
Master Class
- Spray hairspray on part of the back cover of the phone.
- Apply glitter to the tire using a brush.
- Apply glitter quickly as the polish dries and the glitter may not stick.
- Seal with a good coat of clear varnish.
- Let it dry.
You will need: beads, glue gun, tongs or tweezers.
Master Class
You will need: cotton or wool thread for knitting (white, black), needle, hook (clover 1.8 mm), black marker, cotton wool.
Master Class
- Cast on the required number of loops to match the width of the phone. (Standard size - 20 air loops, designation - VP).
- Knit 4 rows, 19 single crochets (designation: RLS), make 20 loops with a rise and make a turn. This should form the base of the cover.
- Tie the bases in a circle, sc, to the desired height of the cover. (Standard size – 10 cm).
- Tie the ears according to the pattern shown in the picture.
