Installing a new backup on Android. Making a backup of the firmware on Android

In our computer age, it is impossible not to understand what backup is on Android. When working with computer systems and large volumes of material, one inevitably has to think about their safety. Otherwise, something irreparable may happen, and the user will find himself, like the famous old woman, with nothing.

In order not to lose data, you need to constantly backup Android to your computer; no other reliable way to save information has yet been found. There are good instructions for users running the latest versions of computer software on how to set up backups so that in the event of a computer program failure or hardware failure, they remain with the information received. With their help, you can guarantee yourself protection from annoying failures of mobile media.

What is backup?

Creating a general or partial backup of certain Android data - backup. In particular, this could be a computer program or various user documents. Such a replenishable archive makes it possible to restore information after various program failures or media failure. In addition, backup capabilities allow you to automate the process of transferring existing settings and programs from one device to another. This solves the problem without the need for manual configuration; you can have two operating systems with the same set of existing computer programs and received data.

Backup on Android

What is backup on Android? Today there are a large number of different storage media operating on these computer principles. They can fail at any time, and then the user will need the information. Using the backup procedure, you can restore your operating system relatively easily.

Depending on the form of the backup, it is possible to make a general save of the system, including even the settings of various computer applications, and a backup of a specific amount of information from private sectors, for example, important SMS messages for you, necessary electronic contacts, interesting applications, cool photos, etc. .d.

Why make a backup?

So why do you need it and what is backup on Android? Of course, careful activity on the Internet guarantees the normal development of the situation. As can be seen from practice, much more often users who like to take risks with their Android devices are faced with the need to recreate the operating system and data from a backup. As you know, for computer devices there are often a large number of different programs and their elements. When a user regularly changes something in his own device, after some time his device simply breaks down. Moreover, to make a fatal mistake, you don’t need to do anything out of the ordinary; just pressing the wrong button is enough.

However, an ordinary user who does not want to conduct risky experiments with his media may run into other serious problems: malicious viruses, numerous hackers, errors in the program - and there is a need to restore the original form. And for this you need a backup.

Backup principles

How to make a backup on Android? When working with copying information from mobile media, for security and increased efficiency, you must strictly adhere to several simple principles:

1. Systematic actions in the process. Creating backups from mobile media should be as mandatory as eating three full meals a day.
2. The concept of verification as a mandatory element of backups. It is necessary to examine the backup copy of the data, because for a number of specific reasons the recovery process may be interrupted. It would be quite a shame if, at a particularly dramatic moment, the backup option was a dud. Therefore, after completing the process of creating a backup copy, open random (or the most important) files from the created archive and in practice make sure that they are safe.
3. The principle of separation. The best option is to place backups not in one place, but in several, if possible. In particular, on a flash drive, a removable hard drive, in the cloud, etc. After all, hard drives in some cases lose their performance, and the Internet may not be available at the right time.
4. Distributing the contents of the backup copy into a number of sections. As you wish, divide the material by importance, topic, volume, etc. Most importantly, you should always know where the necessary material is located, how guaranteed its safety is and how you can immediately find the data.

How to make a backup?

How to make a backup on Android? Android has basic built-in backup functions, and with the advent of new firmware they are regularly expanded. Such built-in functions are quite enough for the average user. In the “Accounts” category, you can simply leave marks for automatic highlighting, and when some problem arises or if the settings are violated, they will be recreated automatically as soon as the media is connected to the Internet.

However, it should be noted that in this case, applications downloaded from Google and installed on the gadget will not be recreated. To avoid this situation, you need to use special applications that make it possible to backup literally the entire media. A similar program is primarily Titanium Backup - the most popular application for backing up and restoring data after loss.

Using a computer

It should be noted that the easiest way to create a general backup of your own device is to backup your Android via a computer. This is very important, because we live in a time of technological development, and mobile devices have become an integral part of it; they contain a lot of important data that needs to be saved.

There are a lot of backup options via a computer. For example, you can restore via Google. Almost any Android device can interact with a working Google account. Then it’s simple: find the necessary settings in the menu (category “Personal”), click the “Backup and Restore” command.

You just need to remember to check that all the boxes are ticked. If the gadget does not yet have the required entry, activate the “Backup Account” button, press it, and enter information from a previously existing entry.

To configure what the device should remember, go to the previous menu, find the “Accounts and Synchronization” section, where we select the items that need to be saved.

Synchronization must be triggered on the media; the key for this function is usually located in the upper section of the menu. The corresponding instructions can be easily found on specialized websites. You can use other methods, understanding what backup is on Android. With knowledge of the basics, you can choose the appropriate option for saving data.

Flashtool

How to backup Android firmware using Flashtool? There are simple instructions consisting of several points:

1. First you need to turn off the media itself. Then we activate the drivers, which can be found in the archive of basic programs. Open and find the scatter file. When it is not loaded, you can download it from any other media with a similar processor. Select with a tick only the first line of Preloader. And all screenshots in the gadget are clickable.
2. Open the Memory Test section. Select only one line RAM Test.
3. Activate the Start key and connect the non-working media to the computer, after which Flashtool will automatically switch the memory test to operating mode.
4. We copy the information received from the memory test and transfer it to a notepad. Zero partitions are not needed (they are highlighted with a line in the screenshot).
5. Switch to the ReadBack section and activate the Add button. Double-click on the highlighted line with your computer mouse. We write any file name (to avoid confusion, EMMC_USER is better) and the location where the memory block will be located.
6. In the window on the screen we write three parameters, according to the data already found (see point 5).
7. Find and activate with the Ok key. After that, press the Read Back key and activate the turned off gadget.
8. As a result, separate blocks of flash memory will appear in the media, the largest of which is EMMC_USER (user region), several gigabytes in size depending on the brand of the media. To guarantee, the information can be flashed into the gadget using the SP Flash Tool - Write Memory program. The Android backup via Flashtool is completely ready. Now you don't have to worry about data safety.

Restore to general settings

Backing up Android without root rights is not a big problem. "Android" has a basic function to get a general backup of an Android gadget without root rights, as well as the technical capabilities to completely restore it. The maximum that is needed for this operation is a working computer and media running Android 4.0.

In addition, you can recreate and update the backup copy of your existing Android media using the Titanium Backup program. This is probably one of the most effective solutions for backup, but for this you need root rights.

Other options

It is much easier to use ADB utilities to create and restore a backup copy. This computer program for Android backup is available in the Google Android SDK, which is easy to download for free.

Let's start by activating the Java Development Kit (if not activated), since the Android SDK requires it. Download and activate the 32-bit Java Development Kit (Android SDK requires a 32-bit version, even when the gadget is running a 64-bit version of Windows).

You can then copy and activate Android. When the SDK responds that it is unable to detect Java, then perhaps you installed the 64-bit version, then install the 32-bit version.

Next is the next stage of backing up the Android firmware. Once you have resolved all the issues and successfully installed the SDK, activate the Android SDK Manager from the menu on the Start screen. Check the Android SDK Platform-tools line and install to unpack the working options package for the platform that has ADB. When an error is found, you need to activate SDK Manager with administrator rights (touch the SDK Manager image on the screen in the Start menu and stop on the line “Run as administrator”).

Don't forget to enable USB setup on your own device. This can be dealt with using the developer toolbar in the basic Android settings.

Then connect your computer and your gadget using a USB cable. By this time, you need to activate the drivers for your gadget; as a rule, they can be found on the website of the smartphone manufacturer. As a rule, the computer installs the drivers itself. For example, you can activate Google USB Driver using Android SDK Manager, and perhaps you can revive your gadget.

ADB survey

When working on a backup of the Android firmware, you need to remember that the directory in which the Android SDK is located is shown at the very top of the Android SDK Manager computer window, not far from the SDK Path line.

You need to locate the adb.exe file in the platform-tools section. As a rule, it is located at C:\Users\NAME\AppData\Local\Android\Android-sdk\platform-tools.

Look into this folder and, holding down the Shift key, click on the right button of the computer mouse. In the window that appears in the context menu, click on the line “Open command window”. And in order to understand whether there is an adb connection with your gadget, run the adb devices command.

The name of your gadget should appear in the list of existing devices. If it is not there, the driver was probably installed incorrectly.

Using ADB

What a backup is on Android using adb commands can only be understood after completing the installation work. For a shared backup, run this command: adb backup -apk -shared -all -f C:\Users\NAME\backup.ab.

This action creates a backup copy of all existing applications and data on the SD card to the file C:\Users\NAME\backup.ab on a running computer. Write NAME in the line for the username of your device or select another space.

When you activate the command on your phone, you need to record the appearance of the backup copy. You can further protect your backup with a strong password.

Depending on the amount of information, the process may take a certain period of time.

To recreate the necessary backup, you need to run the following command: adb restore C:\Users\NAME\backup.ab.

Information will be highlighted on the screen confirming that the backup copy will replace all existing data on the media. If there is a password on the backup, then you must specify it.

In order to create a complete backup of Android without root rights, you can be an average computer user who understands the characteristic features of Android. I would like to believe that this function will be in the Android interface in the coming years.

Synchronization with cloud services

To save basic data on the device (music, photos), just enable synchronization with cloud services. You can use standard Google Drive. You just need to set up synchronization once and no longer worry about losing all your data if your phone is stolen or broken.

You can also use other services; cloud storage, as a rule, is available in all email clients. They differ only in memory capacity, which is also an important parameter. So, storage from Google offers 15 GB for free, you will have to pay for additional space. The largest tariff plan offers 30 TB for $300 per month.

A similar service from Microsoft makes only 5 GB available; for 50 GB you need to pay two dollars a month. Another service, Dropbox, can be synchronized with the Microsoft storage. Only 2 GB is given for free, but if you invite other users to the system, you can get additional space for free. Unlimited features will be available to the user for only 10 euros per month per user.

The largest storage is 50 GB - “Mega”. This is one of the most profitable services where you can store data without worrying about its security. True, this service has a peculiarity - if you forget your password, it will be impossible to recover it.

Android includes a built-in feature to create a full backup of your Android phone without root, as well as a tool to restore it. All you need is a computer and a device running Android 4.0 (Ice Cream Sandwich).

You can also create and restore a backup of your Android device using the Titanium Backup utility. Titanium Backup is perhaps one of the best backup solutions, but it requires root access.

Installing the Android SDK

To create and restore a backup, we will use ADB (Android Debug Bridge) commands. This utility is included in the Google Android SDK, which you can download for free.

First, you need to install the Java Development Kit (if not installed), since the Android SDK requires it. Download and install the 32-bit version of the Java Development Kit (Android SDK requires the 32-bit version even if you have a 64-bit version of Windows).

Next, download and install the Android SDK. If the SDK says it can't find Java, then you may have installed a 64-bit version, in which case install the 32-bit version.

After you have successfully installed the SDK, launch Android SDK Manager from the Start menu. Check the box next to Android SDK Platform-tools and click the install button to install the platform tools package that contains ADB. If you see an error, run SDK Manager as Administrator (click on the SDK Manager icon in the Start menu and select “Run as Administrator”).

Preparing the device

You must enable USB debugging on your device. You can do this from the developer tools in Android settings.

Now connect your PC and your device using a USB cable. You must have drivers installed for your smartphone; usually they can be downloaded from the manufacturer’s website. Install Google USB Driver via Android SDK Manager (Extras subfolder), it might work.

ADB check

Remember the path where Android SDK is installed. It appears at the very top of the Android SDK Manager window next to SDK Path.

You need to find the adb.exe file in the platform-tools folder. It is usually located at C:\Users\NAME\AppData\Local\Android\Android-sdk\platform-tools.

Go to this folder and, holding down the Shift button, right-click on an empty space, select “Open command window” in the context menu that opens. To check the adb connection to your device, run the adb devices command.

Your device should appear in the list. If it is not there, then the driver is installed incorrectly.

Now you can use adb commands to create a backup copy of your device files. For a full backup, run the following command:
adb backup -apk -shared -all -f C:\Users\NAME\backup.ab
The command will create a backup copy of all installed applications (apk files) and data on the SD card to the C:\Users\NAME\backup.ab file on your computer. Replace NAME in the command with your computer's username or specify a different location.

When you run the command on your phone, you must confirm the creation of the backup. You can also protect your backup with a password.

Depending on the amount of data, the process may take some time.

Restoring a backup

To restore a backup, you need to run the following command:
adb restore C:\Users\NAME\backup.ab
A confirmation message appears indicating that the backup will replace all data on the device. If a password is set for the backup, you will need to enter it.

To create a full backup of an Android phone without root rights, you need to be an average user who understands the peculiarities of Android, but with the help of our instructions, even a beginner can do this. We hope this feature will be available in the Android interface in the future.

Backup or backup allows you to make a copy of all data from the device’s hard drive, which can be restored if damaged. Backup is most often done for computers, but today we will look at options on how to make a full backup of the system firmware on Android.

You can create a backup copy for an Android device in several ways: using a computer, using special applications, using services built into the device.

Recovery is a special program, different from regular applications for the Android system, that creates backup copies and then allows you to roll back to them. Stock recovery is installed on devices initially when they are purchased. This type of backup is performed only if you have root rights to the device.

You can install custom recovery yourself. The latter allow you to perform more different actions, and therefore are popular. The most common of them are: TWRP (Team Win Recovery Project) and CWM (ClockworkMod). Next, you will see how to install backup on Android through recovery.

CWM

ClockworkMod is an older program that has less functionality compared to TWRP. You can replace the stock recovery with it (if it is not already installed as the main one) using the ROM Manager utility in the “Setup recovery” section. One of the features of CWM is the control of only “hard” buttons, i.e., volume control and power buttons, which all Android phones and tablets have.

Algorithm for creating a backup using CWM:

1. The phone charge should be at least 60%, and preferably 100%.
2. Free up 500 MB or more of free space.
3. Turn off, wait about a minute.
4. Press and hold the power button and “-” or “+”, depending on the phone model.
5. When the upside-down Android icon appears, briefly press the power button and the opposite volume control button to go to the menu.
6. In the menu that appears, use the “-” or “+” buttons to select the “backup and restore” section, and confirm the selection with the power button
7. In the next menu, select and click “Backup” in the same way
8. All! Within 10–15 minutes, a backup of the firmware and all files will be created on your phone.

How to make a backup on Android without applications? Use the same algorithm, since often installed recoveries have similar menus, as well as control methods. In this case, you do not have to get root access.

If this option seems too inconvenient or you need a backup copy of only part of the data, then further you will read how to make an Android backup using TWRP recovery.

TWRP

TWRP (Team Win Recovery Project) is a more advanced utility for the Android system that allows you to use the touchpad and has an almost complete set of functions for working with file storage, software and the operating system. For example, you can back up only selected files. TWRP has a more convenient menu compared to CWM.

To install TWRP, you will need one of the special applications, such as GooManager. In the program menu you need to select “Install OpenRecovery Script”. Then, using the same program, click “Reboot Recovery” and get to the TWRP menu.

IMPORTANT. It is worth noting that the Android device must also have a high battery level and free storage space.

Click “Backup” and select the required partitions. We swipe across the part of the screen highlighted at the bottom, and the program begins creating a copy for the Android system. After a few minutes, click “Reboot system”. The copy is ready.

Using a PC

Obtaining root access, and at the same time mastering various applications, can be difficult for the user, while making a backup of Android firmware on a computer will be much easier for someone than with TWRP. Moreover, you don’t have to download any additional applications for the device.

All you need for this:

1. Enabled USB debugging on the Android device (you can do this from the settings).
2. Install ADB RUN for your computer, download it for free.
3. PC drivers, which are often installed automatically, and a USB cable.

Algorithm of actions:

1. We connect the phone to the computer and launch the ADB program.
2. Select Backup in the window that opens.
3. Next, select the first item in the new menu.
4. On your Android device, click “Back up data.” You are also prompted to create a password, but this action is optional.

A copy has been created for you to use if necessary!

Here we discussed the main ways to create a full backup for Android, that is, a firmware backup. In addition, there are various functions and utilities that allow you to make copies of applications or various Android games, contacts, SMS, etc. separately.

A backup is a backup copy of all data on your smartphone. It is mainly done before flashing the phone, so that in case of failure, you can return everything as it was.

There are several ways to make an Android system:

• Using special software.
• Using recovery.
• Create a backup copy on a PC.

Let's consider each method of creating an Android backup separately.

Backup Android system using programs

The first program we will look at is My Backup. It is distinguished by its simplicity, it does not require root rights, and it can be downloaded for free from the play market. There is, of course, a PRO version, but it costs $7.

Let's launch the program. You will immediately be presented with a license agreement, which you must agree to. Next, the program menu appears:

Click on the New Backup button. The program will prompt us to save applications and media or data. First, let's save applications and media. We are given a choice of where to save our backup: on a flash drive, online or on a computer. In order not to bother, we’ll choose a flash drive. Now we just have to wait a little.

My Backup after a while shows a window in which it provides a list of what we need to save (applications, photos, music). Select the checkboxes that we need and click OK. Specify your backup name, or leave it as default, and click OK.

Another small window will appear in which you will be asked what to save (apk + data, data or just apk). Choose apk + data, otherwise what's the point of making this backup at all? Now we wait for the program to save all the data. How long this will take depends on how many applications you have installed.

Now let's save the data. We return to the main program window, click on New Backup again, and select “Data”. Let’s choose exactly this type of saving – to a flash drive. After that, in a new window, check the boxes for contacts, sms, call log, in general, everything you need.

In a new window, write the backup name or leave the default one, click OK, and wait for the operation to complete.

There are other programs for backing up the Android system, for example, Nandroid manager, Helium, Titanium BackUp. They all roughly operate according to the same scenario, and have only small differences, so as an example, we have analyzed the simplest program that does not require root rights.

To restore your data later, go to My Backups. Select what you need to restore, where from, and the program will find all saved copies. Select the one you need and restore.

Let's look at how to make a backup of an Android phone (namely applications with a cache) via Titanium Backup. This app is said to be considered the best among its competitors. It does not backup the system, but only phone applications, and also saves a copy of the phone book, SMS and, then, allows you to restore them.

Titanium will be extremely useful if you want to reinstall the phone's firmware, but you don't want to reinstall everything you had before.

First you need to download this app from the link from Play Store.

Next, take care of the memory in your phone. When you make copies of applications and their cache, you will need a place to save them. Both a memory card and the phone itself are suitable for this. Allocate at least 1GB for this, although it all depends on how much data you'll be backing up.

So, you have downloaded and installed the application with superuser rights. It can backup one application of your choice, or all of them - with settings, parameters, and so on.

Let's say you want to back up one application (or several, but not all). In Titanium, open the Backups tab. You'll be shown a list of apps installed on your phone or tablet, and you'll see icons next to each app. If there is an exclamation mark next to an application, this means that this application does not yet have a backup copy. And then there will be a sign for a phone or flash drive. If there is a phone icon next to an application, then this application is installed on the phone itself. And if it’s a flash drive, then it’s on a flash drive.

Select the application you want to copy, click on it, a menu will appear. Clicking the Save button creates a backup copy of this application. Freezing stops the application. Delete and Destroy data, respectively, deletes the application itself, but the data is saved, or deletes the data of this application; if you use both buttons, both the application and all its data will disappear.

If you need to create copies of all applications on your Android phone, then you should consider a Titanium feature such as group actions.

From the main menu you can find this item and open it. This time we are not asked to work with each application separately, but instead we can choose to operate on all applications at once.

Let's consider what we are offered as operations on applications and their data.

— Make r.k. of all user software - this means that absolutely all applications from the phone, as well as their data, will be saved.

— Make r.k. all system data - this time we are asked to work on creating copies of data from system services and applications (not the applications themselves, but their data).

— Make r.k. all user software and system data - let’s combine the first two points and get what this point does.

— Make new r.k. – simply makes new backups, even if there are already old ones (let there be several copies, just in case).

— Remove old r.k. – if we change our minds about storing old backups, then feel free to delete them (for example, those that are more than 3 days old and are no longer relevant for us).

— Update r.k. for changed data - it simply updates, overwrites a copy of the data if we want it.

— Make r.k. for updated software - the same action as the previous one, only not a copy with data is involved, but a copy of the application. Your application has been updated and you are overwriting a copy of it.

- Backup of new applications and updates - again, take the previous 2 points, sum them up and get this point.

— Backup of new User+System applications and new versions - overwrites updated data, updated applications + also adds system applications here.

As you can see, there is a lot to play with. Choose what you need and create backup copies for your health. But how can all this be restored later?

So, we created backup copies of applications and data, flashed the phone (that is, reinstalled the Android operating system), and now we need to return all our applications and their data, of course, back. How to restore backup copies of applications and their data on an Android phone or tablet?

Group actions also have a Restore function. Let's go there and see what they offer us this time.

— Restore missing software with data – from the name we understand that the application and its data will be installed from a backup copy.

— Restore all software with data - this item applies to all applications and their data.

— Restore all system data – here we work with data from system applications.

— Restore all software + all system data - both your applications and system applications, and all their data will be restored.

- Restore new versions of user software - for example, you have an old version of an application installed, and then they will install a new version for you.

To summarize all of the above in a nutshell, to create a backup copy of all applications and data in Titanium, using Group Actions, first click the “Make r.k. all user software and system data” to create backup copies, and then click “Restore all software + all system data” to restore.

Let's look at what else Titanium Backup can do.

The application can move applications to the flash drive from the phone and back (see Batch actions). Google Play disables app updates. The Data Manipulation item will help you clear the cache and application data and reset their settings. In Recovery Mode, it creates an update.zip file, Titanium itself is saved there, you have reset the phone to factory settings and Titanium can be restored from there. You can also delete application backups on a schedule.

Backup Android system via recovery

Recovery is a kind of BIOS when compared to a computer. Simply put, this is software for flashing the phone's firmware, installing fonts, creating backups, etc.

Each phone enters recovery differently, but basically it is a combination of the lock key and the volume rocker up. Naturally, the phone must be turned off.

Okay, let's move on to the backup itself. Creating an Android backup through recovery is the surest way, because absolutely all data is saved there: from the call log to program data. You don’t have to choose what exactly to copy; recovery will create a backup of everything.

The only disadvantage of this method is that a backup of the Android system can only be done through custom recovery: CWM or TWRP. There is no such option in stock recovery.

As a rule, there is no Russian language in CWM recovery, everything is in English. Therefore, to make a backup, we need:

• Go into recovery;
• Use the volume rocker to get to the Backup and restore item and select it by pressing the power key;
• Next, select Backup;
• Confirm your actions and click Yes.

And now we wait a few minutes for the backup to be created.

To then restore the Android system using this backup, you need:

• Go into recovery;
• Go to Backup and restore;
• Select Restore;
• Select the desired package;
• Confirm the action and select Yes.

And we wait until the android system is restored.

There is a similar scenario in TWRP recovery. Even simpler. Firstly, there are touch controls (in most cases), and twrp can be found in Russian. So to create an Android backup we proceed as follows:

• We go into recovery;
• Select the item “Backup”;
• Check off the sections for backup (it is recommended to check everything);
• And at the bottom there will be a swipe similar to unlocking. We click on it, and the creation of a backup will begin.

Recovery:

• We go into recovery;
• Select the item “Recovery”;
• Select a package with a copy;
• Confirm the action;
• We wait;
• Reboot the phone.

Backup Android system to computer

The last method is to backup the Android system to a computer. To do this we need the My Phone Explorer program. Download it and install it on your computer. We enable USB debugging on the phone, connect it to the PC via a cable, and select the “Charge only” connection item in the curtain. Press the F1 button and wait until the phone connects to the computer. If you can’t connect your phone this way, try via Wi-Fi.

Download My Phone Explorer Client to your phone from the play market and launch it. The phone must be connected to wi-fi.

Click “Add User” on your computer.

We wait until the program establishes a connection.

Now we can browse our phone through the computer. But we need a backup. Go to the “Miscellaneous” tab and click “Back up data”.

If you are interested in the question: how to make a full backup copy of your Android gadget, then this article will describe the main methods that will solve this issue. Agree, we live in an era of technological boom and mobile devices have become an integral part of it; we store a lot of valuable information on them that needs to be copied and saved.

Backup or backup in Android

There are basically three methods: cloud, software and through system recovery. We will consider everything step by step and try not to miss a single point. Let's start with the easiest ones and gradually move on to more complex ones.

Google Cloud Service

Almost every Android device is connected to a valid Google account, if you don’t have one, then first create an account for this by following this link. After the account is created, go to the menu -> settings (personal section) -> backup and restore.

And we check that there are checkmarks everywhere; if you did not have an entry, then click “Backup account” and the add button, enter all the data from the previously registered entry.

In order to configure what the gadget should remember, we return to the previous menu and go to “Accounts and synchronization”, there we mark the items that need to be reserved.

Important! Synchronization must be active on your smartphone or tablet; it is usually located in the top drop-down menu.

z
This is the most primitive method, and is not able to save your messages, applications, etc., in order to do this, read on.

Software method

To do this, we need a program; we described how to download and install it earlier, so we believe that you already have it installed; it is also necessary for it to be on your device. Now follow the instructions:

1. Launch the MyPhoneExplorer program;

2. Connect the gadget to the PC using a cable;

3. Press F1 or in the File -> Connect menu (phone with Android OS and USB cable method);

4. Wait a minute;

5. As soon as the phone is connected, go to “Miscellaneous” -> “Create a backup”;

6. Select a folder for backup;

7. Mark all the points that need to be saved;

8. Click “Create a backup copy”;

9. Go to “Miscellaneous” -> “Restore from backup”.

Titaniumbackup

There is also a method for creating copies using the application, but you will need root rights and the application itself.

To make a copy:

1. Open TitaniumBU Pro;

2. Go to the “Backups” section;

3. Click the sheet icon with a check mark (upper right corner);

4. In the backup section: “Make r.k. all user software and system data";

5. To restore, go to the section below and tap on the required item.

The path where the r.k. file will be available. (backup) is specified in the application settings.

Rom manager

We described another option using the application, how to install and configure it earlier, so we will not repeat it, you will also need.

Open the utility, go to the “backup and restore” item and select “Save current ROM”, then enter its name.

By default, it will be saved to the memory card /sdcard/clockworkmod/backup

To restore, tap the “Backups” item.

After this, Android will be rebooted into system recovery and a copy will be created, or vice versa, a recovery will be performed.

For smartphones and tablets from Samsung

The manufacturer took care of its users and released a special program, so it will assume that you already have it. Next we proceed according to the instructions.

1. Launch kies;

2. Enable USB debugging on Android;

3. Connect your smartphone or tablet to your personal computer using a cable;

4. We wait until the program determines the model;

5. Go to the “Backup / Restore” item;

6. Select the necessary items and click “backup”;

7. To restore, go to the “Recover data” item;

8. Select the folder with the previously made copy, mark the necessary items for recovery, and click “Recovery”.

Android backup via recovery

To do this, you first need to install one of the alternative recovery options. For example, or , then you need to boot the phone into recovery mode.

For CWM – backup and restore section, for TWRP – backup (copy), restore – restoration.

Bottom line

As you can see, there are many ways to make an Android backup; it’s up to you to choose which one to use. We recommend using myphoneexplorer or kies programs, and for advanced users, do all this through the system recovery menu.