Remove page number from a specific one. How to remove pagination in Word

If you don’t know the answer to this question yet, read our article carefully. We will tell you how to remove page numbers from the entire document, remove numbering from the title page (starting page), how to do this in various versions of the Word text editor. Rest assured, even a novice Word user can handle this.

Page numbering in a Word document can be located in both the header and footer. Removing page numbers may be necessary when creating any text document, be it an official paper or some kind of scientific work. How to do it? We'll tell you now.

Removing page numbers in Word 2011

So, what is required from the user to remove numbering from the entire document:

1. First, on the toolbar, find the “View” tab, then select the item called “Page Layout”.
2. Then, in the same tab we find the item “Header and Footers”.
3. Select the number of the required page.
4. Press the DELETE key on the keyboard.

How to remove numbering from the initial page in Word 2011?

Hiding the numbering on the first page of a document is necessary if it is a title page where page numbering is not required. In order to change the numbering of the very first page in a document, the user is required to do the following. The user goes to the “Document Elements” tab, which is located in the “Header and Footer” section. Then you need to click on “Page.” The section called “Number on the first page” must be unchecked. After this, the numbering from the initial sheet of the Word document will disappear.

By the way, if your document contains sections and subsections, then you can remove the numbering from the first pages in them too.

To do this, just do the following. First, find an item called “Insert” in the main menu of Word. Next, select the section we need: “Header” or “Footer”. Next, find the item “Change...footer”, click on it.

To prevent a number from being displayed on the title page of your document, on the “Designer” tab you need to check the box called “Special header and footer for the first page.” The last step is to finish the job by closing the header and footer window.

Is it possible to start numbering from the second page?

Can. And there is nothing complicated about this either. How to remove a number from the second page? To do this, you need to place the cursor at the very end of the initial page of the document. Next, go to the “Markup” tab on the toolbar, then open the “Breaks” section, click on “Next”. After adding a break to the document, the number on the second sheet should disappear, provided that it was also missing on the initial sheet of the document.

If there is a number on the initial sheet and there is no way to remove it, then the user needs to place the cursor on the second page. Next, you need to go to the “Insert” section, go to the “Header or Footer” item. Next, click on the “Change” item and check the box next to the “Special footer” item. We finish the work by closing the header and footer window.

How to completely remove numbering?

Method number 1.

The user needs to double-click on the page number, which one you decide for yourself. Then hold down the left button, highlight the number and press the “Delete” button.

Method number 2.

How to remove the page number in Word, but not from all pages?

In this section we will talk about selective numbering, which allows you to put numbers only on some pages of a Word document. To do this, you need to break your document into several sections; to do this, place the mouse cursor at the end of the page, where the end of the first and the beginning of the second section will be located.

Next, open the “Sections” tab, click on the “Breaks” item, select the “Next...” option. Next, click on “Tab”, then on “Number...”, then select the template we need (“Top”, “Bottom”). The user must then go to the very beginning of the section where the numbering format needs to be changed.

In this article we examined the question “ how to remove page number in Word" As you already understand, there is nothing complicated about this. The main thing is to strictly follow the specified algorithm of actions. Only in this case the result of the work will not disappoint you, and the process itself will not cause any hassle or difficulties.

For any literate person, the ability to draw up a document is one of the most necessary. Whether you are a student, a doctor or a businessman, existing realities oblige you to know the rules according to which the text must be processed. It is necessary to comply with the required font sizes, indents, headers and footers and page numbering.

Removal

The first option that is usually implied when preparing documents is the absence of any page markings. All sheets must be clean. They contain only the necessary information without unnecessary frills. How to remove page numbering in Word if you received such a document? There is a universal and simple method. It will help you quickly solve the problem:

1. Open the desired text document and scroll any sheet to the very bottom.
2. Then double-click on the page number with the left mouse button.
3. The number will be highlighted. And you can delete it with the Backspace key.
4. Click the "Close" button on the header and footer panel that appears.

Now the calculus of sheets will disappear throughout the text. Having figured out how to remove page numbering in Word throughout the entire document, you can proceed to special cases.

Word 2003

The fundamental principle of drawing up any document, report or project is the presence of a title page without numbering. On it, a person indicates only the title and author. Let’s say you often use the Word program, but you don’t know how to remove numbering from the first page. Do not worry. This shouldn't be a big problem for you. The first thing to do is to get rid of all page numbers in the document, as was described just above. Then select the "Insert" menu. Click on "Page Numbers". Select the position of the numbers on the sheet. And uncheck the box next to "Number on the first page". Now nothing will be displayed on the title page.

If you need to know how to remove the numbering of some pages in Word, and not all of them at once, then you will have to try very hard and carefully work on it. You have to do the following:

• Review your document carefully. Identify places where page numbers are not needed.
• On previous sheets, use the function “Insert” - “Break” - “New section from next page”.

Each section has its own numbering. And you will have to insert numbers into them separately each time. But now you can choose which pages should not be numbered.

Word 2007

With the release of this version of the software, there were many dramatic interface changes. Therefore, the last considered tasks differ in how they are performed. So, how to remove page numbering in Word 2007 and later versions? We do it like this:

1. To create a cover page, select "Page Layout" from the top menu. Click on the small arrow next to "Page Options". After that, add a checkbox to “Difference headers and footers for the first page.”
2. To change only some numbers, insert breaks. Do this exactly the same as in the old version. This menu is also located in the "Page Layout" menu.

In addition, there is a little trick. She will tell you how to remove page numbering in Word. Sometimes it works too. If no one is going to seriously check the document, then some numbers can simply be painted over with white.

When working with text documents, there is often a need to number pages. Numbering allows you to create a correct table of contents and simplifies navigation through the document.

In the Word text editor, page numbering is enabled using the “Page Number” button on the “Insert” tab. Most users know about this and usually there are no problems with it. However, sometimes page numbering needs to be adjusted to the specifics of a particular document, for example, removing numbering from the first page, and not everyone can cope with this task.

Now we will consider just such a problem. The material will be relevant for users of modern versions of Word. Such as Word 2007, 2010, 2013 and 2016.

To remove page numbers from the title page, first make a simple page number that will appear on all pages of the document, including the first. After that, go to the “Page Layout” tab. Here you need to click on the small button, which is located in the lower right corner of the “Page Options” button block.

After clicking this button, the “Page Settings” window will open. Here we go to the “Paper Source” tab and enable the “Distinguish between first page headers and footers” option.

Then close the “Page Settings” window using the “OK” button. With this simple manipulation, we removed the numbering from the first page of the Word document.

But, there is one important point: now there is no number on the first page of the document, but on the second page there is the number “2”. If this numbering option suits you, then you can finish here. If you want the numbering on the second page to start from number “1”, then you need to go to the “Insert” tab, click on the “Page Number” button and open “Page Number Format”.

As a result, a small window with numbering parameters will appear. In order for the number “1” to appear on the second page of the document, here you need to enable the “Start with” option and set the value to “0”.

Thus, after saving this setting, Word will begin numbering pages not from one, but from zero. This means that on the second page we will get not “2”, but “1”, as needed.

It should be noted that this method of removing numbering works great only for the first page of a Word document; if you need to leave the first two pages or more without numbering, it will not work. In this case, the document must be separated using section breaks. You can read about how this is done.

When writing graduation papers, essays and reports, it is necessary to create a title page with general information (title, topic, author, company or educational institution, etc.). The cover of the work should not contain extraneous characters and is most often written according to a predetermined template that meets the requirements. In most cases, the user can only insert his data into the “header” of the sheet, and then add this blank to his work. In this article you will learn how to remove the page number from

Differences between versions

Since Microsoft updates its office suite every few years, the functionality or interface often changes. These instructions are suitable for all versions of Word starting from 2010. The differences will be minimal. Removing the page number from the title page is very easy using the instructions below.

Removal instructions

We need to perform two procedures - delete the first number and start numbering from number 1 on the second page. Let's look at them in order. First, we’ll find out how to remove the page number from the title page using standard program tools:

1. Place the cursor on the first page. Then open the "Page Layout" section. In Word 2016, you need to go to the "Layout" section and select the "Page Setup" window.
2. Go to the "Paper Source" tab and click on the checkbox next to "first page". Close the settings window with the OK button.
3. The number on the title page will now disappear.

There is also an alternative method. To do this, you will need to go to the “Designer” section. Then click on the footer to open the settings menu. Check the box "Special footer for the first page" and erase the number from the "title".

Now you know how to remove the page number from the page. All that remains is to correct the numbering of subsequent pages if necessary. To do this, follow the instructions:

1. To reassign the number of the second sheet to one, open the "Insert" tab.
2. Now click on the "Page Number" button and open the "Format" item.
3. In the "start at" line, set the ordinal value to 0 so that the second sheet starts at one.

These instructions are suitable for any type of numbering, regardless of its location and settings. It takes no more than a minute to remove the page number from the title page in Word.

Also, in many works it is necessary to disable numbering on several subsequent sheets. For example, when there should be content after the initial page. Then it is recommended to do the following:

1. Place your cursor on the second page, where the content is located.
2. Then click on the "Page Break" button in the "Insert" tab.
3. Now the first section is the initial two sheets, and the second is all the rest. To break the connection between them, double-click on the footer.
4. Click on the button to go to the next section. Select "Same as previous section". After this, the two sections of the document will no longer be related to each other.
5. Now let's edit the second section. Open the header and footer editing again. Go to the “Page Number Format” settings and set the numbering to the desired number. If there is a title page and contents before the section, then the numbering should begin with the number 3.

Now you know how to remove the page number from the title page (2010－2016 Word). Using these instructions, you can easily edit documents according to all requirements. You can also use a separate tool to create title pages. If you don’t have an exact template, then you can create the title page manually. Word comes with many pre-built templates. They all differ in background, design, color, row layout, etc. If necessary, you can download additional templates from the official website office.com.

In the process of formatting a document, be it an essay or a term paper, the user has to remove page numbers in accordance with technical requirements. You can remove page numbering in Word from the entire document at once, or remove it only on certain sheets. All of the methods listed below will be relevant for versions of Microsoft Word such as 2007, 2010, 2013 and 2017.

Remove numbering from an entire document

There are cases when, due to inattention, errors are made in the process of numbering a document. To remove page numbers from an entire document, you must follow these steps.

After completing the actions, numbers will be deleted from the first, second, and so on until the last page.

Manual removal of page numbers

If you need to remove numbering from one sheet, then in this case, the manual method will help. You need to go to the corresponding sheet, the numbering on which you want to remove, double-click on the page number.

After the number is highlighted, press the “Backspace” key on the keyboard.

Disabling numbering using headers and footers

To remove numbers only on the first page, without affecting subsequent ones, you need to use the “Header and Footer” function.

After completing the steps, the numbering will disappear from the first page, and will remain in sequential order on subsequent pages. That is, accordingly, the second sheet will be numbered 2, the third sheet will be numbered 3.

It should be taken into account that if there are section breaks in the document, then the removal of numbering will be implemented for each section separately.