Menu
homeiOS

Tricolor 8300 how to remove unnecessary channels. Questions about the tricolor

The Tricolor TV company offers its subscribers high-quality satellite television services. The operator monitors all updates and makes changes to the program without interruption. This allows subscribers to use a modern service and always be up to date with the latest events. How to update channels on Tricolor TV yourself? Is it necessary to contact a service center for this or can I perform the procedure myself?

Before you update the list of channels on Tricolor TV, you must carefully study the instructions for action. This will significantly simplify the procedure and help prevent technical malfunctions. You can configure the system yourself, without the help of service center employees.

If the software is not updated in a timely manner, the equipment begins to malfunction, which leads to a deterioration in the quality of service and not through the fault of the operator, but due to the negligence of system users.

Reasons for the errors that occur

If the list of channels has become smaller or completely empty, then you need to find out the reason for this failure. Among the most common is the lack of the latest updates. This is due to the fact that the characteristics of satellite broadcasting are constantly changing, and accordingly the system cannot make adjustments on its own. This requires the subscriber's assistance.

Experts say that you can set the receiver to update the software only once a month.

This is quite enough for the system to work properly.

It often happens that the user cannot understand why the equipment has stopped performing its functions. This may be due to the fact that the subscriber carried out the update procedure. In this case, you can also solve the problem yourself. To do this, you need to return the factory settings. To do this, follow these steps:

  • Enter the menu in the “Settings” section.
  • Activate the “Return to factory settings” option.
  • Next, you should set the set-top box to automatically search for channels.
  • After the procedure is completed, you should save all data and reboot the device.

If you want to use modern satellite television that meets all the requirements of 2019, you should periodically reboot the software. You can do this yourself at home, call a technician, or take the receiver to a service center.

Please note that, if necessary, the equipment can only be replaced with new ones, which makes it possible to obtain additional options. For example, using modern set-top boxes, you can watch TV shows on several gadgets at the same time.

Tricolor TV is a company providing high-quality satellite television services with a large coverage area. Every resident of Russia can afford the service of the new era.

The main thing is to use the service correctly, following the recommendations of the company’s specialists.

If you periodically update the software, then no system failures will occur. In case of any technical malfunctions, you can contact the call center or take the receiver for diagnostics.

Connect to the largest operator, which guarantees that the subscriber will use only high-quality services. Each client of the company gets the opportunity to connect to any tariff plan and use additional options for a separate payment. Don't miss the opportunity to spend your leisure time at the highest level.

The largest Russian satellite television operator Tricolor TV won a large market of viewers with its initial affordability. And now, when the number of subscribers has exceeded 10 million, the Tricolor TV company has decided to have a blast with the audience in full. In addition to advertising on channels created by Tricolor TV, where it was not previously available, now advertising screensaver appears for a few seconds between switching tricolor TV channels. In the near future, we may expect an increase in the subscription fee or a cut in the basic free package.

Advertising insert while switching tricolor TV channels appeared in the new software firmware, which, as it turned out, was released not only to improve very “crude” receivers, but also to optimize the parameters of advertising inserts.

Fight against advertising on Tricolor TV

To disable advertising, make changes in the receiver settings: Menu - Settings - System settings - Other - Display time and set the parameter to "0" - Save changes - Exit - Turn off the receiver from the network for a few seconds.!

If you can’t remove advertising with some model, write to the Tricolor TV support service or contact an online consultant in your Personal Account on the Tricolor TV website and ask to remove advertising! There are already such applicants, advertising is being removed. It’s easier for them to sort this out with you, because they will still have 10 million unsuspecting subscribers.

Scammers have already responded on the Internet, who, under the guise of tricolor TV support, offer to remove the advertising screensaver if you enter your cell phone number, here is this scam site "application-to-disable-advertising.rf" Don't be fooled!

The "Basic" package becomes paid

The Tricolor TV company promised that the main all-Russian TV channels will always remain FREE.

Since February 5, about 10 main federal channels are available to Tricolor TV subscribers with MPEG2 equipment without a subscription fee. Since the date indicated above, “Channel 5 Petersburg” of the free package has been transferred to frequency 12111 L (DVB-S2), where SD channels are broadcast in improved quality (DV multiplex). A copy of “Channel 5 Petersburg”, which is broadcast on 12226 L in MPEG2, is available for viewing only after paying the “Unified” tariff, which is 1200 rubles per year.

The following TV channels also ceased to be available (in the free package): “TV-Center”, “Russia 24”, “Carousel”

Detailed video instructions "How to remove Tricolor advertising"

Using satellite television is very convenient, but from time to time, both old and new customers have problems. A large number of channels appear on the screen that need to be deleted. But few people know how to remove unnecessary channels.

Why unnecessary channels appear:

There can be many reasons. But when they appear, it becomes very difficult and inconvenient to use such television.

  • one of the reasons for the appearance of extra TV channels is the reinstallation of software;
  • It also happens that a channel used to work, but then it was transferred to a new broadcast range and therefore it no longer works. Then you need to remove it so that it simply does not bother you;
  • channels have been installed that are of no interest to anyone, so why would they interfere if it is easier to block them.

So it’s much easier to install programs in such a way as to immediately get to the channel that is needed. And then just enjoy watching. Most often, clients refuse unnecessary ranges for the reason that they are outdated or poorly reproduced on new equipment. If you are a satellite TV user with old equipment, then it is much easier to abandon unnecessary channels.

So, let's learn how to remove unnecessary channels on Tricolor satellite TV. Let's look at the step-by-step instructions. How to remove? All you need is the remote control for your TV, so:

  • Select “Menu” on the remote control, then go to settings. Then you need to select “Arrange favorites”;
  • using the red button on the remote control you can delete the entire list of channels that you no longer need;
  • no deletion code required. You can organize all channels using the yellow button;
  • The final step is conservation. If this is not done, then all efforts are in vain.

New users

How to resolve the issue of deleting channels for new users on Tricolor? On devices that are considered next-generation hardware, things are much more complicated. Here you can only use blocking. The block is also installed when using 0000. In this case, the program will remain, but it will not interfere with watching programs. As an option to resolve the issue, you can move it to the end of the list and then it will not come to your attention at all. To refuse, you also only need a remote control; you don’t need to do anything on the receiver.

Phased shutdown:

  • select the “Menu” item on the control panel;
  • go to the “Installation” program;
  • then enter 0000;
  • the next stage is “organization of channels”;
  • Using the arrows, you need to select unnecessary information on the screen and after selecting, press EXIT, and then save.

The same steps can be taken if you decide to change the name of the broadcast.

At the moment the company is replacing all software. Therefore, in the near future, the possibility of changing something will generally remain a thing of the past. So try it now while you still have the opportunity.

If there is a need to unlock or return the channel, then do the same using 0000 to unlock the receiver. Read also.

The provider has two main options for receivers for signal transmission, first of all, these are the GS 8605/06/07/08 models, as well as the GS 210, 510, E501/591 series. Depending on the model of the receiver, the question of how to organize channels on a TV set to Tricolor TV is decided. As a rule, all settings need to be made once. This process is simple, everyone can do it themselves.

On such devices, the panel has a function organizing TV channels. With its help, you can change names and view the operating parameters of each channel. And there is a special menu item “Arrange favorites”, which allows you to move a program from one position to another, creating so-called favorite groups.

The “Arrange Favorites” item opens as follows:

  1. Press "MENU".
  2. Using the “VOLUME” and “CHANNEL” buttons, find the “CHANNELS” item.
  3. Click OK.
  4. We see on the screen a menu with 2 sub-items, where we select “ORRANGE FAVORITES”.
  5. Click OK.

The menu in its original version was based on 5 favorite groups. You have the option to change their names and swap positions inside.

To do this you need to do the following.

  1. Using the selection buttons on the remote control, we find the desired list that we will rename, press the F button
  2. After we have jumped to the on-screen version of the keyboard, using the program selection and sound control buttons, we select combinations of letters and symbols. If the letter is chosen incorrectly, erase it using F1, to change the layout use F
  3. Click OK.
  4. If necessary, we do the same with the rest of the groups.
  5. We create the list itself. Use the selection buttons to find the one that we will form and click OK.
  6. To move the desired programs from the right side of the “ALL CHANNELS” menu that opens to the favorite list, use the selection keys on the remote control and F
  7. Once all the necessary channels have been added, they can be swapped with each other. We do this with the search keys, find the one we need, press F
  8. To remove excess we use F
  9. Press the “EXIT” button on the remote control.
  10. To view the newly created groups, select “OK”, and then F. The menu we need opens, allowing us to select the desired group.

Setting up on receivers GS E501/591, GS U510; GS U210

More have already formatted lists that are impossible to manage. However, there is always the possibility of creating of your group, where you can customize the names and sequence of programs you prefer. All this is done through the “Channel Editor” menu item.

The procedure is as follows:

  1. Select the “MENU” key, then use the “RIGHT” and “LEFT” arrows to stop at “APPLICATIONS”.
  2. Click "OK".
  3. We find the item “CHANNEL EDITOR”, use the “UP/DOWN”, “RIGHT/LEFT” buttons on the remote control to do this, open the window for creating a favorite list.
  4. By pressing F2 we open the on-screen keyboard, with which we enter the name of our future sequence.
  5. Save the selected name using F
  6. Moving the cursor to the formed group, press F. On the right we see the sequence of all programs.
  7. Select the one you need and click “OK”.
  8. Then select F2 again, jump to the list, find it, click “OK” and so on. We perform similar actions as much as we need.
  9. Using F1 we ​​move the channels. To do this, select the desired object with the cursor and select F Using the “UP/DOWN” arrows on the remote control, set the program to the required place in the sequence and click “OK”.
  10. After generating the list, leave the “EDITOR” by repeatedly pressing the “EXIT” button on the remote control.
  11. Using F4 on the left, find the group we just created and click OK.

There can be up to 15 such groups on the GS E501/591, GS U510, GS U210 receiver models.

If you were unable to configure the settings on your TV yourself, you can always contact Tricolor TV specialists for help. The advantages of choosing a provider with a large coverage area are the ability to quickly solve any problem that arises and the quality of the services provided, which eliminates as much as possible the possibility of such situations arising. Therefore, if you experience or, it would be most reasonable to seek help from the technical support service of subscribers.

On July 31, 2017, changes were made in broadcasting aimed at dividing regional TV channels into appropriate lists and designed to make viewing these TV channels more convenient.

To correctly display the list of TV channels, follow these steps:

1. Press the “Menu” button and select “Settings”.

2. Select Factory Reset and click OK.


3. Confirm resetting the receiver to factory settings by first pressing the red “F1” or “Info” button on the remote control, and then selecting the “Yes” option.



5. Select the receiver menu language and audio channel languages, then click the “Next” button.


6. Select audio and video settings and click Next.


7. Set the time settings and proceed to the next step of the Setup Wizard by clicking the “Next” button.


8. Select the operator “Tricolor TV” and click the “Next” button.


9. Select the region that suits you. There will be 3 regions available for selection - “Main”, “Moscow +0 hours.” and “Moscow +2 hours.”

Attention! You must select one of two regions - “Moscow +0 hours.” or “Moscow +2 hours.” - depending on the region of your residence. In the first case, all TV channels will be broadcast according to Moscow time, in the second, some TV channels will be broadcast with a time shift of +2 hours from Moscow time.

When you select the “Main” region, one information channel will be saved in the channel list.


10. Wait until the search for TV channels is completed and save the found TV channels.