Ways to connect your tablet to the Internet. Connecting the tablet to the Internet: all possible ways. There are two main ways to configure

Computer technology is penetrating human life, and today even older people are mastering tablets, smartphones, and other electronics. To get the most out of your new device, you need to connect it to the Internet. For an experienced user, this will not be a problem, but less savvy users may wonder how to connect the tablet to the Internet. All possible methods, as well as possible problems and ways to solve them will be described below.

Connecting via Wi-Fi is the most common method, so it makes sense to start there.

Important! In the future, to reconnect, you just need to turn on Wi-Fi. You will not need to re-enter your password, as the device will save it automatically.

Wireless connection problems

If a user wants to connect home Internet to a tablet and uses Wi-Fi, which is distributed through a router, it may happen that the tablet does not connect to Wi-Fi, does not see the network, or the device is connected to Wi-Fi, but there is no Internet. This could happen for a number of reasons.

If Wi-Fi does not turn on on your device, then most likely Airplane mode is activated. In this case, all modules are simply disabled. You need to disable it in the tablet settings or by lowering the curtain down, there is a corresponding icon there.
The advice that any user will probably try first is. It sounds trivial, but it often helps.
On a tablet Date and time settings are incorrect. The problem is quite rare, but sometimes it happens. The solution is to check the data is correct.
If the tablet does not connect to Wi-Fi and writes that wrong password, you just need to enter it again. Maybe someone changed the router settings. To do this, select the saved Wi-Fi network and click on the forget item. The device will delete all data on it, and the user must reconnect with a new password.
The next problem involves failure of the Wi-Fi network itself. It happens that the device connects to the network, but there is no Internet. You should check the connection on another device. If there is no Internet access, then you need to wait until the provider fixes the problem.
If The settings on the tablet are lost, then you can check this with a simple Wi-Fi Fixer utility; upon request in the Play Market, it appears first in the list. The program checks the network and fixes the problem itself. The user only needs to download it. Before attempting to connect to the network, the device should be rebooted.
Extreme situation - reset the tablet to factory settings. This solution should be resorted to if it becomes clear that the password is correct, the date is correct, and Wi-Fi is working correctly. Before you perform this step, it is recommended that you save all data on your tablet as it will be deleted. After that, go to the device settings and select “Backup and reset”. The procedure will take some time, you should make sure that the device is connected to power and does not run out of power during the process. While the tablet is recovering, it is not recommended to press anything or touch the device at all. By the way, this method helps solve the problem when the Internet on the tablet disappears. This can also be caused by a failure. If after the reset everything remains the same, then you should contact the service for diagnostics.
If it becomes clear that the Internet is not working, and a call to the provider reveals that the problem is not on the line, then you need to reinstall the router. First, you should try pressing the service “reset” button on the router itself. It is usually called “Reset”, after which we configure the router again. How to do this, you need to read the instructions. The task is not the most difficult, but depending on the manufacturer, the sequence of actions may vary.

These are the most common problems. If none of the above helped, then the problem lies in the wireless module of the tablet itself. You can check its operation by connecting to wireless networks running on other devices. Second option - the router is broken. This will become clear after re-configuring.

Connection using a SIM card

The second way to access the Internet is to use a SIM card. This will allow you to use the Internet anywhere. First you need to buy a SIM card for the tablet, there are no special difficulties here, it is only important to decide on the size - regular, micro or nano.

Important! Today, universal options are sold where you just need to squeeze the desired size out of a plastic case. If the SIM card is old, then it can be cut off or, conversely, inserted into the adapter. All this can be done for free at any communication store.

When the user has a SIM card and it is inserted into the appropriate slot, you need to configure the Internet on the tablet. This won't cause any difficulties. As soon as the SIM card is inserted into the tablet, SMS messages with settings will be sent automatically. You need to open them and click the save button. Now all that remains is to turn on the Internet on the tablet not through Wi-Fi, but through the mobile network.

It happens that the SMS did not arrive, in this case you can call the hotline, and the operator will send the necessary data. If for some reason this is not possible, then You can make the settings yourself.

What to do if there is no Internet connection? First of all, you should make sure that the SIM card is installed correctly. Near the corresponding connector there is a diagram on how to insert it correctly. The card must be inserted until it clicks.

Advice! If the SIM card was inserted while the device was turned on, you should reboot, since not every device supports hot start.

Other mobile connection methods

What should you do if you need to access the Internet from a tablet, but there is no Wi-Fi network, and the tablet does not have a SIM card, that is, this connection method is not implied at all? In this case, you can distribute Wi-Fi from your smartphone to your tablet or use a 3G modem.

3G modems are ubiquitous, but how to connect it to a tablet if the latter does not have a USB input? Option one - buy 3G modem with router function, it costs more, but is more convenient to use. You can simply connect the tablet to the router and then walk with it throughout the apartment, without having to carry a modem with you. If you already have a modem, you can do connection via OTG cable. This is a special microUSB to USB adapter that will help you connect not only a modem, but also any USB device. The method is suitable for models on Windows and Android OS.

Modern devices support this option to access the Internet; most likely, you won’t even need to install special software. But if this does not happen, then it will come to the rescue PPP Widget utility. Through it, the settings that were described above for the SIM card are performed. There are no differences here. In some cases, when you connect the modem to the tablet, the driver installation software will automatically launch; you just need to wait until the process is completed.

Via smartphone

Important! You can distribute the Internet from tablet to tablet in the same way. There are no differences in settings.

Connection via PC

If it happens that you cannot connect your tablet to the Internet via your phone, for example, traffic is expensive, or there is no Internet on your smartphone at all, then you can connect your tablet to the Internet via your computer. There are two options - wired and wireless. In the second case, the PC must be equipped with a Wi-Fi module, in which case you will need the MyPublicWiFi utility. It is the simplest, you just need to install it and turn it on. Everything will work automatically.

On Yandex Market

Huawei MediaPad M5 Lite 10 32Gb LTE tablet on Yandex Market

Tablet Huawei MediaPad M5 Lite 10 32Gb WiFi on Yandex Market

Thanks to tablets, people have quick access to their documents, photos and other materials in a format convenient for them. In many cases, using this gadget is much more practical than carrying a laptop with you, and even more so than using a home computer. However, it is worth noting that the lack of Internet largely limits the functionality of the device.

Connecting the tablet to the global network

Let's consider all the available options for connecting modern tablets to the Internet. Depending on the selected model, the connection to the network is carried out using a built-in mobile module; they use the mobile operator’s networks. There is also a wireless connection via Wi-Fi, but you will need a router for this. And finally, using an external modem or Bluetooth transmission.

How to set up Internet on a tablet using a SIM card

Depending on the tablet model, it may be equipped with a mobile Internet module. Thanks to this technology, you can use a purchased SIM card from a telecom operator to gain access to the global network. The complexity of this method lies in the setup process. It is this stage that scares off a large number of unprepared users. On smartphones, this stage is simplified due to the fact that the operator sends a message with an automatic configuration algorithm.

Tablet with SIM

When connecting via SIM card, some problems may arise. The main cause of problems with such a connection is primarily the incorrect operation of the card itself. You need to make sure that the Internet is really connected and paid for; you can find out from the operator. Next, you need to make sure that the SIM card is installed correctly. After installing the card, you should restart the device.

The main advantage of such a connection will be its universal availability, since the mobile network is now widespread even in the farthest corners. The disadvantage of this method will be the cost of the Internet and limited traffic. Mobile operators often set quite expensive tariffs, especially for 3G or 4G standards.

How to connect the Internet on a tablet using Wi-Fi

Devices that do not have a SIM card slot usually have a Wi-Fi module. In general, most modern tablets have it, and connecting to the Internet via Wi-Fi is the most popular way to provide unlimited Internet for a tablet.

If you are using a home network, then it is best to install the router as close as possible to the place where the tablet will be most often used (to minimize the distance from the router to improve signal quality). It is advisable to avoid the presence of partitions between the device and the router.

Connect via Wi-Fi and mobile networks

In most devices, the Wi-Fi module is turned on in the “curtain” by clicking on the corresponding icon. You can turn on Wi-Fi in a more complicated way: you need to find the settings, select “Wireless Networks” in them, find the “Wi-Fi” item and activate it.

To connect to a specific network, you need to select the network with the desired name in the list and click on it. They can be open (have no protection, you can freely connect to them) and closed (password protected). To connect to an open network, just click on its name and the device will automatically connect to it. To connect to a closed network, you must enter the password for this access point. In this case, you do not need to enter a password every time. The tablet remembers Wi-Fi passwords and automatically connects to it when it finds a familiar network.

In some routers, the privacy settings can be set to a hidden network. To connect to it, you need to know its name, as well as other parameters and set them manually in the settings. To do this, you need to go to the Wi-fi settings, find the “Add network” button (or similar). In the window that appears, you need to enter the network name and password.

How to distribute Wi-Fi from one mobile device to others

Connecting to the network via a personal computer

One of the simplest ways to connect to the World Wide Web is through the use of a computer. You must first check your computer for support of Virtual Wi-Fi technology, and also check for the availability of up-to-date drivers. In order for the laptop to be able to distribute the Internet, you need to perform several actions:

install the Virtual Router program;
configure the newly created network in the program: give it a name and password;
connect the gadget to the network.

Virtual Router logo

If the laptop is connected to the network using a USB modem, the Internet will be distributed differently. You need to make sure that all Wi-Fi drivers are available and the modem is working well.

First you need to get permission to use the network. This can be done by entering netsh wlan set hostednetwork mode=allow into the command line. The command line is called by the key combination Win+R. After this, you need to download the VirtualRouter Plus application, launch it and configure it. Having entered all the necessary data, you can save all the settings and try to test the connection.

There are several factors that are important in the question of how you can connect your tablet to the Internet via your laptop via USB if it does not have a Wi-Fi module. The first factor is whether the laptop has wired network access. The second factor is whether the mobile device has root rights.

Android SDK interface

Initially, you need to download the AndroidTool and Android SDK programs. After this, you can start setting up the connection:

In the network settings of your laptop, you need to find the “Manage network connections” section. Right-click to open the context menu for local connections. In the “Sharing” section you need to allow access to network resources;
In the mobile device, in the “For Developers” section, you need to enable USB debugging and connect the tablet to the laptop with a cable;
Next you need to launch AndroidTool. Click the update button and wait for the device to appear in the connection list. Then you need to click on Check DNS and select the second address from the top. Next, click Connect and if the connection is successful, test it from the tablet without disconnecting the laptop and tablet.

How to set up Internet on a tablet using a USB modem

How a USB modem works

Connecting using a USB modem is not the most popular for tablet devices, unlike laptops. Any such device is fully functional thanks to the use of a cable, on one side of which there is a USB input, and on the other a micro USB or Lighting connector, depending on the device. To connect you need:

In the settings, find the “Mobile network” item;
select the “Data transfer” section and turn on the desired network;
connect the modem to the device, wait for it to be detected;
then select the item with the access point and set the parameters for the new point.

How to connect the Internet to a tablet via Bluetooth

This method usually does not require any additional programs, since the Internet distribution function via Bluetooth is available by default in most gadgets. To operate a mesh created using Bluetooth technology, you only need 3G or 4G Internet connected to the distribution device, and the data transfer function is also enabled. As a precaution, it is worth cleaning your device from viruses. A regular antivirus, which can be downloaded, for example, from Google Play, will help with this.

Bluetooth logo

On your Android device, you need to go to settings, “Wireless networks”, and inside the “More” section find “Modem mode”. In this menu, from all the options you need to select the “General” item. Internet via Bluetooth." The distribution is activated and the device is ready for use; all that remains is to connect the tablet to it.

You can do this using a third party app like BlueVPN by following these steps:

You need to download and install this program (it exists for all the most common operating systems);
Pair the devices. You need to activate Bluetooth on both devices, one of them must find the other. This is done differently in different tablets; you may need to go to the device pairing menu and perform this action there;
Launch the BlueVPN program. If the gadget is on the Android operating system, then it does not need additional settings. For other operating systems, you will need to register an access point in the settings.

Below we will talk about connecting the tablet to the Internet via Wi-Fi, via 3G (for which you will definitely need a SIM card with 3G or a device with it) and a 3G/Wi-Fi modem, a USB network card and more sophisticated methods from the Internet series to the tablet via laptop via USB. We hope that the above is useful to you!

Wi-Fi router

When purchasing a tablet, we recommend that you immediately acquire a Wi-Fi router (we hope there is no need to talk about the obvious – the need to have the Internet at home). You can buy one in almost every electronics store, and in computer markets it is generally a must-have item for sale. As for the cost, an inexpensive router will cost about 1200-1500 rubles. But we wouldn’t recommend saving on network equipment. Not all routers are the same, and much will depend on the cost of the device: cheap routers can overheat, freeze, and randomly reboot - such malfunctions should not occur in high-quality, and therefore more expensive, equipment.

In addition, almost the main problem with cheap routers is the “cut off” speed. Let's say your tariff plan states 50 Mb/s for downloading and uploading, but a weak router will be able to provide, at best, about 32 and 16 Mb/s. Also, of course, a lot, but you didn’t pay for 32 MB, and especially not for 16 MB, but for all 50. And then there’s no point in blaming the provider in vain. Maybe it’s not the problem at all, but the stuffing of the router, which is simply incapable of more.

Small coverage area is another problem of a weak router. In addition to data processing speed, it should be of no less interest to you. This parameter will determine whether Wi-Fi will reach all rooms of the apartment or, to exaggerate, will only work within the one in which the router is installed. In an open space, the router can distribute Wi-Fi within a 100-meter zone, but with an apartment everything is much more complicated: walls, partitions, doors and other obstacles significantly reduce the coverage area. So for a two-room apartment, a router for 1,200 rubles may not be enough.

The quality of the signal and its range will depend on the number of external antennas. In short, the more of them, the better: each of the antennas can be directed, thereby improving the signal quality in a particular room. But these are already details.

Alternatively, these could be ASUS RT-N66U or TP-LINK TL-WDR4300 routers, both with three antennas, cost from 3,200 rubles.

So, you bought a router, brought it home, and what next? With routers of the mid-price category and above, everything is now generally simple: to connect such a router to a computer you do not need any special skills - everything necessary for this is included in the package - we just follow the instructions given in the instructions.

Now: the tablet is in your hands, turn on Wi-Fi in the “Settings” menu – “Wireless connections and networks” for Android tablets, tap on the icon on the screen – “Wireless connections” for Windows tablets and “Options” – “Wi- Fi" for iOS devices.

The system will automatically detect all available Wi-Fi connections. All you have to do is select your newly connected and configured Wi-Fi from the list of suggested ones and click “Connect”. Enter the password and enjoy!

This, in our opinion, is the simplest and most correct way to use the Internet with an Internet tablet at home or in the office.

In addition, Wi-Fi connections are now available in most cafes and restaurants, access points are also organized in shopping and entertainment centers, and in some cities Wi-Fi can be found even in parks and other public places.

About the cost of using the Internet via Wi-Fi. Let's start from scratch: Wi-Fi can be either free (thanks to unwary neighbors! or, say, thanks to open networks in public catering establishments) or require some kind of fee. If we talk about home Internet, we pay strictly according to the tariff plan, as before: connecting a router will in no way change the price. But some very enterprising citizens demanded money for the password to Wi-Fi in public places. So, let’s say, we have more than once encountered Wi-Fi in “Waiting Rooms” at railway stations, the password for which cost from 30 rubles/hour. In this case, a tariff would be charged for the use of sockets. And, yes, also strictly according to the charging time of the laptop/tablet/phone.

Mobile Internet

If you do not have the opportunity to create or connect to Wi-Fi, you can resort to using the mobile Internet. And there are at least 5 options for organizing the connection.

First: tablet with support 3G

If every tablet probably has a Wi-Fi module, then the presence of a 3G module is an option for which you will have to pay a lot.

What is 3G? These are 3rd generation mobile communication technologies, one of which is high-speed mobile access to Internet services. To connect to 3G networks, your tablet must have a built-in module. In addition to it, you will need a SIM card from a mobile operator that provides a 3G connection service.

Note that 3G is more expensive than home Internet and often has limited traffic, i.e. You will be able to download from and upload to sites a strictly limited amount of information; everything that is above the norm will be paid at a separate rate.

Therefore, we recommend that you familiarize yourself with the tariff plans of each mobile operator and only then buy a card. In addition, pay attention to the coverage area of 3G networks of a particular operator. 3G is far from ubiquitous networks, but you can safely use them within the perimeter of large cities.

In addition to 3G, there are also LTE networks - more modern and faster networks for wireless data transmission. However, LTE tablets, firstly, are not cheap, and secondly, the technology itself is still poorly distributed in our country, so for now it makes sense to talk only about 3G networks and connecting to them.

We chose an operator and a tariff plan, purchased a SIM card, and placed it in the appropriate slot in the tablet. And that's really all. You don’t need to create any passwords, make additional settings, or anything else. The only thing is that to save battery power and, in fact, mobile traffic, it is better to deactivate the 3G connection in the same “Settings” menu and not use it unless necessary.

By the way, the presence of a SIM card in your tablet means not only the ability to connect to the Internet anywhere at any time, but also the ability to make calls using standard mobile communication technologies, thereby turning ordinary Internet tablets into so-called “tablet phones”.

Among the brightest representatives of the “genre” are the Apple iPad Air Wi-Fi+LTE, costing from 25 thousand rubles, and the Samsung Galaxy Tab 3 3G, costing from 12 thousand, and ASUS Google Nexus 7 LTE, priced from 13.5 thousand rubles per model with 32 GB of internal memory manufactured in 2013.

Remember, we said above that the presence of a 3G/4G/LTE module significantly affects the price of the product? So: the same Apple iPad Air Wi-Fi with the same 32 GB of internal memory will cost 22 thousand instead of 25 thousand for the model with LTE; Samsung Galaxy Tab 3 16 GB costs 9 thousand, and Google Nexus 7 2013 without the corresponding module costs 10.3 thousand rubles. That is, on average, a 3G module costs 3 thousand rubles. Remember this number, it will be useful to you later.

Second:3G modem

With a 3G modem, things are the same as in the previous paragraph: we select a tariff plan, buy a SIM card and, in fact, the modem itself, connect the modem to the tablet using a regular OTG cable. This is, if you like, a slightly enlarged analogue of what could be built into your tablet.

How much does this whole idea cost? It depends how lucky you are. Some mobile operators, to popularize their products and services, sometimes organize auctions of unprecedented generosity, offering to connect to 3G Internet for a month or more by purchasing a modem “for only 1 ruble!” or something similar.

In the world, a modem from an operator costs from 400 rubles, and taking into account advance payments, monthly tariff fees and other associated expenses, the amount increases to 1200-1500 rubles. Yes, this is not 3 thousand, but only one and a half, but the 3G modem will hang on the adapter, which is not always convenient. Although, if you think about it, a flash drive with mobile Internet can be used on other devices - a laptop, for example, or even a computer. It's up to you, in a word.

Reservation: To connect a USB modem, drivers must first be installed on the tablet to read this device. Plus, the modem must be switched to the “Modem Only” state. This can be done using a home PC via a hyperterminal. The procedure is reversible, so “Autostart” and all other delights can then be returned.

Third:3G/Wi-Fi router

This is also a portable device with a SIM card, but it operates on a slightly different principle. The modem with SIM card accepts 3G, and the Internet is distributed via Wi-Fi. This device is convenient to use when you don’t want to carry around with a modem hanging on an adapter, or you need to connect not one, but several devices to 3G at the same time.

Such a router, depending on its size, can be used both at home and taken with you on trips. Plus, if the signal reception is poor, you can place the router higher and further away, and receive the Internet where it is more convenient for you.

The cost of the device is from 1,600 rubles (for example, a Huawei E355 flash drive 3G modem with a Wi-Fi router function). Routers that are more “strong” in terms of hardware and signal transmission quality cost more than 2.5 thousand (for example, the standalone Huawei E586 3G/Wi-Fi router). Although, if you buy it as a set - 3G/Wi-Fi router + operator SIM card - the purchase may cost less: about 2 thousand rubles.

By the way, such a router has a battery, so you can definitely do without wires and restrictions for at least 4-5 hours (working time in data transfer mode, and in standby mode these can last up to 280 hours). The only thing you will need to connect the tablet is to turn on Wi-Fi in “Settings” and enter the Wi-Fi password, if one is set on the modem.

Fourth: 3 G byWi-Fi via smartphone onOSAndroid

If you have 3G on your smartphone, the Internet can be distributed via Wi-Fi to and through the tablet. How? The algorithm is simple: in the “Settings” of the smartphone we find “Wireless networks”, and in it - the item “Modem mode” - “Wi-Fi access point”. By activating this item, you can also set a password for Wi-Fi access.

The rest follows the standard scheme: turn on Wi-Fi on the tablet, enter the password and use it.

If the “Data transfer” item for connecting to 3G on your smartphone was deactivated, you will need to enable it accordingly (thanks, cap!).

This type of connection is very power-hungry and the smartphone will most likely be the first to go down, because in addition to pumping data through one channel, it will simultaneously distribute it through another. So you can use it for a very short time or only in the area of access to an outlet.

This is a temporary rather than permanent way to connect your tablet to the Internet.

By the way, you can distribute the Internet through a tablet by switching it to router mode. You never know, maybe you have two tablets at hand at once: one with 3G, and the other with Wi-Fi.

Fifth: Internet viaBluetooth

This method is suitable in the case when your phone is connected to the mobile Internet, no matter what type (namely, a phone - a colored “nut cracker” without any smart functions), but you urgently need to check your email, edit a file or send any data from tablet into the unknown, but there is no Wi-Fi at hand.

However, to organize such an “emergency” connection, your phone must support DUN (Dial-up Networking) technology. Even the ancient Nokia clamshell from 2007 has this, so we think that the likelihood of DUN support in more modern phones is high.

The tablet should also be ready for this type of connection. An application like Dial-up Net is required.

Bluetooth must be turned on on both devices. It is not a fact that you will be able to establish an Internet connection on your tablet this way the first time, or even connect via your phone via Bluetooth in general. Either the programs crash, or “the connection is established,” but the Internet does not appear on the tablet. But, you never know, maybe the stars will align and you will be incredibly lucky!

Internet on a tablet via patchcord

Above, we complained that a 3G modem hanging on an OTG cable is somehow completely a thing of the past. But this is nothing compared to a tablet connected to the home Internet by connecting the patchcore and the “tablet” via a USB network card.

Firstly, the presence of such a network connection in every home is a big misconception, and secondly, the entire portability of a tablet with such a connection is reduced to a minimum. Anyway. That's not what we're talking about.

A USB network card costs from 430 rubles (for example, Edimax EU-4208). We won’t say that every city electric market sells these, but if necessary, you can order it on the Internet.

Everything here is also simple: we connect, establish a connection, and work.

There is, however, one thing: your home router must be configured to automatically detect the IP addresses of devices connected to it. Only in this case will you be able to access the Internet via cable.

PC or laptop

There are at least a dozen ways to access the Internet from a tablet via a computer. But none of them can be called simple.

So, for example, to connect the Internet on a tablet via a computer, at a minimum, you will need to get root rights on the tablet (administrator rights) and install the appropriate software on your computer or laptop. After launching the program on your PC, connect the tablet to it via USB and enable “Debug Mode”. Now we are talking only about Android tablets.

The program will prompt you to use one of the DNS servers to connect. All you have to do is choose the right one. Confirmation of the launch of the program and the synchronization of the process with the tablet analogue of this application must be displayed on the “tablet”.

And that's basically all. If the connection fails, try logging in on your tablet using your IP address. Maybe it will help.

Instead of conclusions

We consider a regular Wi-Fi connection to be the most profitable both in terms of money, comfort during use, and battery life of a tablet with the Internet turned on. Behind it in the queue we will identify 3G/Wi-Fi modems and tablet models with a built-in 3G module (if only because such Internet is a. more expensive than usual, and b. a 3G connection drains the battery too quickly).

And even with a built-in 3G module, you cannot replace it with 4G, and, therefore, the speed of working with the Internet cannot be increased. Moreover, the 3G model of the tablet both weighs and costs more.

Other methods described in this article are rather emergency and cannot be considered as options for permanently connecting a tablet to the Internet due to the need for a wired connection, installation of additional software and the presence of additional devices such as adapters and USB network cards.

The following two tabs change content below.

Elizabeth

Without a twinge of conscience, I ask for “phone numbers” from guys and girls I don’t know well. To check whether the lock button fits comfortably under your finger and whether the autofocus works quickly :) I would like to visit MWC and conduct a live blog from the thick of things.

The tablet is the last word in modern multimedia technology. This compact and ultra-thin device combines almost all the capabilities that today's bulky processor or laptop can present, which is considered as large as a PC compared to other new compact devices. Today's tablet makes it possible to play games or view photos, and, most importantly, it provides access to the Internet for communicating with friends on social networks or for many very useful things, which include studying, broadening one's horizons, improving qualifications and other opportunities.

Most people, when purchasing a tablet, first of all dream of using it to surf the Internet. Therefore, the question becomes relevant for all inexperienced users. It is impossible to get an answer to this question in the form of universal instructions, since there are different tablets and they have different appearance, technical characteristics and operating systems. The possible options for connecting it to the Internet depend on the operating system of your tablet.

Before connecting to the Internet, make a choice which Internet option suits you best. Three network access options are popular today.

It is possible to connect via a standard network cable, but please note that tablets have a LAN connector installed extremely rarely. In addition, Wi-Fi routers are placed in houses and apartments; they receive a signal via a network cable, which then distributes the signal in the form of wireless Internet.

It is possible to connect to the Internet via a mobile network using 3G or 4G technologies, and you can use the Internet through a built-in or external 3G modem. In this kind of modems, a SIM card is installed, like in regular mobile phones. The choice of connecting to the Internet via a tablet is made by you taking into account the capabilities of your tablet.

Connecting Wi-Fi is quite simple. To do this, check the box next to “wireless Internet connection” in the network settings. After this, the tablet itself will detect all active networks within its available reception radius; all you have to do is select the network with the best signal. However, remember that not all networks are open and free. Connecting to some of them is impossible without an access password.

If the tablet has a built-in modem, then the question is how to connect your tablet to the internet It's easy to solve. You just need to insert the SIM card into the desired slot and configure the connection in accordance with the parameters specified on the SIM card. Often in the settings it is necessary to tick the “Data transfer on the network” option for the Internet to work correctly.

Connecting to the network using an external modem is a more complex process. First, make sure that you can connect an external modem to your tablet model. A standard USB port is usually used for connection. The most difficult thing about this connection is to make your modem function for its intended purpose, and not as a virtual disk or card reader, because this modem performs these functions by default. After the modem is working for its intended purpose, you should enter the APN settings and enter the details of your network operator.

In the future, having saved information about the access location, your tablet will automatically connect to the Internet when you connect an external modem. Without the Internet on your tablet, it is impossible to fully appreciate the benefits of this multimedia device. However, for normal operation, the tablet must be configured.

If you want to know: " how to set up internet on a tablet?”, perform the following manipulations one after another. Open the “Settings” menu and select the “Wireless Networks” section. Then go to the “Mobile network” section and select the “APN access point” sub-item, the next step is to create a new access point. This process begins by clicking the Function, New Access Point button. The complexity of setting the parameters depends on the provider you choose. First, you need to provide the name of the connection, its address, as well as the proxy server address, connection port, user name and password. Addresses of providers can be found on the Internet. Owners of wonder media wm8650 tablets should definitely choose a provider who can provide services that match their prices and suit you. Detailed instructions on how to set up the Internet on a tablet can be obtained by watching a video on this topic; there are many of them on the Internet.

The tablet settings also include installing Skype. To do this, go to Google Play and enter “Skype” into the search engine. After that, go to the Skype application page. Here you click on “install” and often find that the Skype application is incompatible with your device. If this happens, then download and install the apk file and enjoy it to your health.

It should be said that for most devices, the only possible way to connect to the Internet is through a Wi-Fi connection. Wondering how to install internet on tablet, it is worth looking for information on this topic on the Internet itself. Start by going to settings on your tablet and turning on Wi-Fi. The tablet programs themselves will search for access points - places of Internet connection and a list of names will appear on the screen.

Click on the selected connection name, enter the password if the system requires it, and you can use the network. Nowadays, an access point can be found in many cafes, restaurants, hotels, bus stations and other public places. At home it is created using a router. A router is a device that is located close to Wi-Fi-enabled devices and provides them with Internet access.

The range of standard access points is small and ranges from one hundred to two hundred meters. There is a misconception that it is impossible to connect to the network anywhere you need via Wi-Fi, but this is not true. To connect to the Internet anywhere, there are 3G modems. Outwardly, they look like a flash drive and are purchased from mobile operators. True, the 3G coverage area in our country is not particularly large, which means that if you go out into the country, you most often will not be able to use the Internet. However, even for such cases they found a way out. We will tell you how to install Internet on your tablet in such a situation. The latest generation of smartphones can “turn” into Internet access points with just one tap on the screen. Now you know that if in the place where you are there is a regular 2G cellular connection, then you will be able to access the Internet and surf it.

Connecting the Internet to a tablet is probably the first thing every owner of a mobile device thinks about when he picks it up. Today, the Internet is needed not only for communication: for a long time, many programs, in addition to instant messengers and mail, and even some games require constant connection to the Internet.

You can choose the best Internet for your tablet based on the specific conditions in which you plan to use it. For example, for those who use the device only at home, and for people who are actively on the move and constantly in touch, different connection options will be optimal.

There are several ways to connect your tablet to the Internet. The choice will depend on your device configuration, the availability of additional equipment, and in some cases, your geographic location.

Wi-Fi connection

This is an option for home connection: if wired Internet is installed in your house or apartment, mobile devices can be connected via a Wi-Fi router. To do this you need:

enable Wi-Fi in the tablet settings;
run a search for networks and find the one you need (usually it is first in the list, as it provides the strongest signal);
Enter the security key if the network is encrypted.

After this, your device will have access to the network, and you can use it both for communication and for watching videos, sharing photos, reading news and many other tasks.

The same technology can be used in various public spaces: now many cafes, restaurants, educational or entertainment institutions organize free access for users and visitors.

Connecting a tablet via a computer

If you do not have a Wi-Fi router, but your computer connects to the World Wide Web directly (via fiber, twisted pair, ADSL or 3G), you can use its Wi-Fi module as a router. To provide mobile devices with an Internet connection via a computer, you need to create an access point on it using standard Windows OS tools (available in version 7 and higher) or using a third-party program.

In Windows, you will need to go to the “Network and Sharing Center”, select “Set up a wireless computer-to-computer network” and then set the network parameters, following the system prompts.

The second option will seem simpler to many, since it does not require complex manipulations. It is enough to download and install the program (for example, “Connectify”), in its settings, set the encryption type and network security key. After this, you can connect with mobile devices according to the scheme described in the previous paragraph.

Mobile networks

3G and LTE technologies are quite widely developed today and can easily compete with wired connections in terms of speed. Mobile Internet is a good way for those who are thinking about how to set up the Internet on a tablet if there is no constant access to Wi-Fi.

Almost all tablet models are now equipped with radio modules for SIM cards for making calls, sending SMS and, of course, accessing the network. Study the tariffs of your operator and connect the one that suits you, taking into account the planned volume of traffic and/or time of use.

Settings from the operator usually come automatically after installing the card; all you have to do is enable data transfer in the tablet settings. If this does not happen, contact your operator and find out the access point settings for manual configuration.

Some users, having a device with two slots for SIM cards, use one of them for calls, and install the second SIM card only for the Internet - if the second operator offers a more favorable tariff than the first.

But how to connect the Internet to a tablet if it does not allow for the installation of a SIM card? In this case, a 3G modem will help. It allows you to establish an Internet connection on devices that are not equipped with SIM card slots: computers, laptops and tablets without a radio module.

The 3G modem is connected to the tablet via an OTG cable - a special short cable for communicating with third-party devices via USB. When connected, it will be recognized as a SIM card, that is, your further actions will be similar to the previous point: enable data transfer, and if the settings did not come automatically, then create and configure the connection point manually according to the operator.

Connection via smartphone

And the last method, which has something in common with all those described above: an active Wi-Fi access point can be created on a smartphone. When receiving mobile Internet via a 3G network, most smartphones have the function of creating a Wi-Fi point, which is also called a “Hotspot”.

Enable the “Hotspot” or “Modem Mode” function (the name depends on the device model) in the smartphone settings and start searching for Wi-Fi networks on your gadget. After finding the desired network, enter the security key (it will be visible on the smartphone when setting up the point) and connect.

Once you figure out how to turn on the Internet on your mobile device, you don’t have to worry about this question anymore: the once-made setup will be saved, and further connections will be made automatically. All you have to do is turn on the tablet and use the programs you need and your favorite games without restrictions.

Video instructions for setting up the Internet on a tablet

You will learn how to set up the Internet on your tablet, as well as how to connect your tablet to the Internet, from this article. It describes the most popular methods of connecting to the Internet. With links to . Do not hesitate to ask questions if something is not clear, I will help in any way I can.

3G connection

Simple too. The same principle works as in phones. You insert the SIM card into the tablet, and it will figure out what to do with it (in some cases, the SIM card must be activated). Turn on Data transfer in the settings and the Internet pick up. Some mobile operators send SMS with Internet settings. Problems are resolved with the operator himself. And as a rule, all settings and instructions can be found on your operator’s website, and they all boil down to one thing - you need to register an access point. For example like this:

APN (access point): internet.life.com.by
Name: empty
Password: empty

This is done for Android 4.* in the settings, settings block WIRELESS NETWORK, tab More.

Settings - "More" tab

There you select the item Mobile network.

"Mobile network" item in the tablet settings

Connection using a 3G modem

In short, you have to disable PIN code entry on the modem and create an access point with the parameters of your cellular operator. And you may need to get it.

Connecting to the Internet using a computer via USB

Due to the fairly large amount of material on this connection method, I decided to move it to a separate article on the site, which is called that way. I warn you that the method is quite complicated, especially for beginners. And it requires the installation of additional programs on the tablet and computer. Root rights are also required.

Internet connection via Ethernet

Exotic way. Used if you need the fastest Internet on your tablet. To make this connection you will need a USB – RJ45 adapter and drivers. You will have to look for drivers for your tablet yourself; I can only tell you where you can download USB to Ethernet drivers for Asus Eee Pad Transformer. Copy the zip archive to the device memory and install in Recovery mode. In a terminal emulator, enter the commands

su
usb_ethernet

Connect the adapter and Ethernet cable to the tablet. Since Android itself does not support this type of connection, turn on Wi-Fi.

Video about all the ways to connect your tablet to the Internet.

To start using the Internet on your tablet, you just need to insert a SIM card from your mobile operator, or have an available Wi-Fi connection nearby. Setting up the Internet and debugging all the options is not at all difficult, following the instructions in this article. Please note that when you insert the SIM card into the device, it should reboot. If the tablet does not do this, perform a restart yourself.

How to set up mobile Internet on a tablet

To access traffic from a SIM card, make sure that you have activated the appropriate tariff from your telecom operator or purchased an unlimited Internet package. Otherwise, you will be charged according to the terms of your current tariff; the cost of non-Internet data plans is usually very high.

go to the tablet settings through the tray. To do this, simply drag the screen with your finger from top to bottom and click the gear in the upper right corner of the tray;

The tablet settings will open in front of you, find the line “Data Usage” and click on it;
check the box next to the words “Mobile data”;

For detailed settings, immediately click the three lines in the upper right corner. You will see several fields: “Data in roaming” will block Internet traffic from the SIM card if you are outside your home region, because the service plan will increase without specially connected options from the operator; “Limit background data” will allow you to set a limit on traffic usage. For example, you have a tariff connected that provides an unlimited Internet option of 3 GB for a month. You set a limit of 3 GB through this line and your traffic will not exceed this limit, thus you will save money. The remaining criteria do not directly affect your mobile data transfer, these are only additional options;

go to the “Advanced Settings” tab in the list on the left. Click on the line “Mobile networks”;

here you can configure your network in more detail if something goes wrong and it gets lost. Go to the “Network Mode” tab;

Place a dot next to “GSM/WCDMA (automatic)”. This will allow the device to switch between network types on its own, depending on the situation;

return to the menu and click on “Network Operators”, only if your operator is identified incorrectly. Click on the words “Search for networks” in the drop-down window;
wait a few seconds to search;

under the top two lines you will see all the operators that were found in this region. If you haven’t found yours, then perhaps your operator’s mobile towers simply aren’t in your location area.

After all the manipulations, your mobile data should work without interruption. If you still cannot set up mobile data transfer, contact your operator to get Internet settings, save the configuration on your tablet, and then perform this algorithm.

How to set up Wi-Fi Internet on a tablet

If there are available Wi-Fi networks near you or you know the password for any of them, then you can very quickly set up a connection via a wireless network:

go back to the settings of your device, click on the Wi Fi tab;

drag the slider until it turns green;
in the field on the right you will see all the Wi-Fi networks that are nearby; if the lock next to the network is lit, this means that it has a password;

click on the network for which you have the desired password and enter it in the window that appears;
click “Connect”;

You are now connected to the Wi-Fi wireless Internet network.

Sometimes, serious problems may arise with the drivers of this network if the Bluetooth / Wi-Fi adapter chip is damaged, or if there are failures in the device’s firmware. Then you will have to flash the tablet yourself or contact a service center.

You will learn how to set up the Internet on your tablet, as well as how to connect your tablet to the Internet, from this article. It describes the most popular methods of connecting to the Internet. With links to detailed instructions. Do not hesitate to ask questions if something is not clear, I will help in any way I can.

3G connection

APN (access point): internet.life.com.by
Name: empty
Password: empty

This is done for Android 4.* in the settings, settings block WIRELESS NETWORK, tab More.

Settings - More Tab

There you select the item Mobile network.

"Mobile network" item in the tablet settings

Connection using a 3G modem

In short, you have to disable PIN code entry on the modem and create an access point with the parameters of your cellular operator. And you may need to get .

Connecting to the Internet using a computer via USB

Internet connection via Ethernet

su
usb_ethernet

Connect the adapter and Ethernet cable to the tablet. Since Android itself does not support this type of connection, turn on Wi-Fi.

Video about all the ways to connect your tablet to the Internet.

Knowing how to set up the Internet on your tablet, you can enjoy all the benefits of access to the global network. Most modern devices of this type have several connection methods. This could be a mobile connection or a wireless connection to a WiFi router.

The second method boasts high connection speeds, and the first - high mobility. If it is from a mobile operator, then only WiFi will do. For normal use of network access services, you must first configure the tablet.

Enabling mobile Internet on a device from any manufacturer, regardless of operating system, is intuitive and simple. Often, all settings are already automatically installed; all you need to do is install a SIM card and turn it on.

Note! However, you don’t always come across a configured gadget, so sometimes a manual connection may be necessary.

Enabling mobile internet on Android

Manually setting up an Android tablet for the Internet is done as follows:

go to “Settings”;
find the “Wireless networks” item there, in which there will be a “More” section;
select “Mobile network”;
switch the slider to active mode.

Important! In addition, you may need to enter connection data in the following lines: APN, Username, Password.

Detailed information can be found on the operator’s website or you can order an SMS with the settings by calling the hotline.

Enabling mobile internet on iOS

For tablets that run on the iOS operating system, the system for turning on the Internet is approximately the same:

It is advisable to check with the operator in advance about such parameters as user name and APN. This can be done on the official website or with the help of support on the hotline;
you need to enter the device settings;
find in them and click on the “Cellular network” item;
you should open the “Data Transfer” tab;
enter the obtained values;
Return to “Cellular Network” and activate the cellular network and 3G or LTE standard slider.

Enabling mobile Internet in Windows

For the Windows operating system, you must follow the instructions:

in the lower right corner click on the “Network” icon;
then go to the “Settings” window;
in the window that opens, select “Network and Internet” and then click on “Mobile network”;
select the network name and click “Connect”.

Note! Perhaps later the system will also ask you to enter your APN, network name and password.

Connection technology

The entire connection technology and procedure for tablets are absolutely identical to working with cellular smartphones.

Connection procedure

First you need to insert the SIM card into the appropriate compartment. After this, it is recommended to check the account status and the connection of the desired tariff for a specific SIM card. This is difficult to do on a tablet, so you can call the hotline or view the data in your personal account.

After turning on the device, you can start making settings. To do this you need to follow the following sequence:

in the settings you need to go to “Data transfer”;
select “More” from the list;
it will have a “Mobile network” section;
then a window will appear in which you need to set the icon opposite the “Data transfer” section;
select "Access Point".

In this case, manual configuration is presented. You can do it automatically; to do this, you can order the settings sent via SMS on the hotline. When the message opens, all data will be entered automatically.

Note! Also, the necessary information can be easily found on the operator’s websites.

Possible connection problems

As a first step, it is recommended to check the correct installation and correct operation of the SIM card itself. It must work correctly and be active. If you can make a call from a phone to check, then for a tablet you need to:

remove the card from the slot and install it in a phone or other gadget that will allow you to check the correct operation;
if the Internet is connected on this device, then check the correctness of the connection or ask the operator about the balance of money in the account and the connection on the network access card.

often there is a small diagram near the card compartment that shows the correct installation;
The card should be installed completely; a small click should indicate correct installation;
If the tablet refuses to find the card, a reboot may help.

Important! If after all operations the result is not achieved, it is recommended to contact the store’s service center to check the device.

Mobile Internet: fast and expensive 3G

The largest coverage network today is provided by the 3G communication standard. No wireless network or more “advanced” mobile connection standards can compare with it in this factor.

You can connect the third generation standard without any problems by contacting the company store of any operator. They have tablets in a separate category, and therefore there are slightly different tariffs and conditions. In addition, it should be taken into account that tablets usually consume more traffic, and therefore it is necessary to choose a more equipped package. Quite often there are various promotions and discounts for users.

The third generation standard has gained great popularity due to the high stability of the connection, good coverage and good speed, sufficient for the usual surfing of online resources. However, before choosing a tablet, you should check the availability of a network module in the selected model.

Note! Not all devices come with 3G support. The question of whether 3G is needed in a tablet can be answered positively.

How to set up Internet on a tablet without a SIM card

All modern tablets can work online without using a mobile connection. To do this you can connect:

to one of the WiFi access points. This wireless connection provides good speed. The access point can be either home or public. Often the router may ask for a password to connect;
connection to a phone that operates in modem mode. If the user has a smartphone connected to the mobile Internet, then the presented mode can be installed on it. In this case, the phone will work as a regular access point and transfer data to the tablet.

Where can I get the data that needs to be entered when setting up mobile Internet?

Each mobile operator requires you to enter different parameters. They can be found on the official websites of operators, asked from a consultant on the hotline, or ordered sent via SMS.

Note! In the latter case, after opening the message, all data will be entered automatically in the required settings section.

Why does the Internet not work after connecting?

Data on the cellular network after connection may not be transmitted due to problems or technical maintenance of the operator’s equipment. In this case, there may be a connection, but no information transfer. Only time will help correct the situation; communication will resume after troubleshooting.

In addition, this can happen if the user’s personal account has a zero balance. If all traffic is exhausted, the operator blocks data exchange. To renew the service, you need to top up your account.