Do Not Disturb and Silent Mode on iPhone. Silent mode on iPhone and Do Not Disturb mode - differences

If the volume button on your iPhone does not work (for example, it gets stuck), do not rush to take your phone to a service center. Before finding out the cost of repairs and paying for replacement buttons (switching to silent mode or adjusting the volume), find out the cause of the problem and try to fix it yourself.

Main causes of malfunctions

Initial diagnostics of the device can be done at home. If the volume button on the iPhone does not work - you do not hear a characteristic click, you feel that the mechanism is loose - most likely the reason is mechanical damage. Shocks and falls easily damage cables, screen, system board and other buttons (volume, lock, iPhone on and off, switching to silent mode). Often, the smartphone not only does not switch to silent mode, but even stops turning on altogether after strong mechanical impact.

Often problems with iPhone occur due to liquid spillage. Penetration of moisture into the housing leads to serious consequences. It is important to dry the phone in time, clean the contacts and tracks, and prevent corrosion, otherwise there may be problems not only with the sound.

The “Volume” (decrease and increase volume), “Power” (turn on and off) and “Mute” (mute, switch to silent mode) buttons do not always break. In some cases, they stop working due to software glitches. For example, when you install unlicensed software on your iPhone or the firmware does not work correctly.

Signs of trouble:

• the button is broken and does not respond
• Volume control (decrease, increase) does not work
• the button gets stuck and works irregularly

If you are sure that the buttons do not work due to a manufacturing defect, immediately contact your Apple retailer or an authorized service center. In another situation, try to solve the iPhone problem yourself.

Troubleshooting software and adjusting settings

When diagnosing the device, you should pay attention to the iPhone settings - the phone may be operating in silent mode. There is also a possibility that a recently installed application is causing the blocking. Then you should do a hard reboot:

• Press “Power” and “Home” at the same time (on the iPhone 7 this is how the on/off and volume buttons work, if the latter is not broken)
• hold them until the phone turns off and the Apple logo appears

As a last resort, go through the iOS recovery procedure through iTunes.

Where to go for repairs

Contact a specialist immediately if the software is working properly, but the mechanism for adjusting or turning on the silent mode has stopped working due to mechanical damage or flooding. When the warranty period is violated, there is no need to waste time on a trip to the service center - it is much more convenient to call a specialist to your home.

As you know, any picture taken using the iPhone camera is accompanied by a sound that simulates the camera shutter being released. That clicking sound is just a sham, and you might think there should be an easy way to turn it off. I hasten to disappoint you, but such a setting does not exist on the iPhone.

If you constantly use your smartphone as a camera, then the presence of such sound is not always convenient. In some cases, clicking the shutter every time you take a photo will simply not be appropriate.

In this article, we will tell you how to turn off the camera sound on iPhone and take photos without causing inconvenience to others.

In Apple iOS devices, there are some tricks you can use to solve this problem. Below are several ways to turn off/on the camera shutter sound on iPhone.

These tips are universal and suitable for all models, so you can use them for any Apple smartphone and tablet, regardless of the version of iOS that is installed on it.

Put your phone on silent mode

The easiest way to turn off the camera shutter sound on an iPhone is to use the silent mode switch located in the upper left corner. When activated, you will feel the phone vibrate and an orange stripe will appear on the button. Keep in mind that in silent mode, the sounds of notifications, incoming calls and other functions are also disabled.

If you cannot find the switch, then your model may not have such a function or it is located under a cover. In this case, remove the protective case/cover from the phone. Oddly enough, this is the most primitive way to turn off the camera shutter sound on iPhone and iPad.

Reduce sound level

What will you do if the silent button doesn't work? In this case, the most obvious solution seems to be to reduce the sound level, but if you try to do this in the Camera application, then turn on the fast motion mode.

When you're about to take a photo, turn down your phone's volume before opening the app. This can be done by pressing the corresponding button on the left side of the phone. It is located under the silent mode switch.

If you have already launched the Camera application, you can reduce the sound level as follows. Swipe up from the bottom of the screen to open the Control Center, then swipe left to open the volume control. With it, you can turn off the camera sound on iPhone.

Mute shutter effect sound using music app

Another method has been discovered on how to turn off the camera shutter sound on iPhone, which works with iOS 7, iOS 8, iOS 9 and newer, without depending on the “Mute” switch. This is a workaround that involves playing a song, here's how it works:

1. Open the Music app and play a song, no matter what it is.

2. Now, use the volume buttons on the side of your iPhone and turn the song volume all the way down to zero.

3. After this, use the “Camera” application in normal mode - after this, the camera will not make sound when shooting.

There are also other ways to turn off camera sound on iPhone and iPad. They are a little more difficult, but still worth mentioning.

Use the Using Assistive Touch feature

Turn on Assistive Touch and adjust audio level controls. To do this, go to “App Settings” → “General” → “Access” → “Assistive Touch” (“Settings App” → “General” → “Accessibility” → “Assistive Touch”).

For convenience, add a mute control button to the Customize Top Level menu. Now you can turn off the shutter sound before turning on the camera or while using it by simply clicking on the image on your iPhone or iPad (iOS).

There are also alternative ways to turn off iPhone camera sound:

● The first method is quite funny, if it did not bring tears. Its essence is to take photos while recording video. You won't hear the shutter sound, but you'll get a lower-quality photo (the same resolution as the recorded video) and an unnecessary video file that you'll have to delete in the future.

● The second method will not remove the sound when shooting, however, others will not hear it. All we need is to connect headphones (standard wired or bluetooth does not matter) and take pictures.

I don't think wearing headphones will be a problem, since a large number of people cannot go about their business without music or an audiobook. However, if you are with friends, covering your ears may be bad manners.

● The third option is the most harmless and effective. After all, it will remove not only the sound of a click when shooting a camera on an iPhone, but will also turn off all sound in principle. Just mute your audio player.

Unfortunately, all these methods do not turn off the camera sound, without causing consequences for other systems. The only way to turn off the camera sound on iPhone and iPad is to download jailbreak.

How to turn off the camera sound on a jailbroken iPhone and iPad?

Removing camera sound on a jailbroken iPhone/iPad is much easier, since there are a huge number of applications that help you do this. A great example is the "StealThsnap" app, which turns off the camera shutter sound on the iPhone. You can download it to your iPhone, iPad or iPod.

Who needs the StealThsnap app?

The Stealthsnap Cydia app allows you to mute the camera shutter sound on iPhone. Its developer, Lex, is a talented newcomer to the cracking software industry. The application is very convenient to use for all models of smartphones and tablets.

How safe is the application?

The application is completely safe as it simply changes the file name photoShutter.caf. This file in iOS memory is responsible for the camera shutter sound. After renaming the file, iOS stops seeing it and the camera sound disappears.

When you delete the application, the file returns to its original state and the shutter sound appears again.

How to download the application?

If you live in a country where the sound of photography must always be on, then this application is a must-have for you. You can download Stealthsnap.

Another thing that makes the app stand out is its amazing compatibility. It supports all versions of operating systems from iOS 1 to iOS 10.2. In the future, it will also be compatible with iOS 11 without installing any additional modifications.

How can I make the flash on my iPhone flash when I make a call? Easily! This feature has been available in iOS for a long time, but with the release of iOS 10 an additional option appeared. Now users can not only set the flash to ring a bell, but also set a parameter in which the flash on an iPhone call will be activated only in silent mode. We'll tell you how to do it right now!

Flash for iPhone call

In general, the original purpose of a flash on a smartphone is to improve the quality of photo and video shooting. It is also used by the standard flashlight function. However, many owners like to see the flash flash when making a call on their phone. By the way, Cupertino decided to integrate this function not as entertainment, but for users with disabilities. But this does not prevent others from turning on the flash when making a call on their iPhone.

How to make a flash on an iPhone when making a call in iOS 10?

1. On an iPhone running iOS 10, open the Settings app.
2. Find the General section, open it and find the Accessibility item.
3. Scroll down a little and find the Hearing section, there is an option for Flash Alerts. Let's press!
4. Here you can turn on iPhone ringer flash and other alerts if you activate the top slider. If you enable the bottom "Flash on silent" option, the flash will automatically turn on during a call when the device is set to silent mode.

Attention!

iPhone users with a version of the mobile platform lower than iOS 10 are not able to set the flash to ring the iPhone in silent mode. They only have access to the first option - turn on or off the flash for calls, depending on whether the smartphone is in silent or normal mode. We previously published a detailed one - in essence it is no different from this one, except for the use of different versions of iOS.

After completing all the steps above, the flash will now flash brightly during a call to your device in silent mode. We must warn you that enabling this option may increase battery consumption on your iPhone. The function can quickly drain your smartphone.

Good time! I don’t know why you needed to film silently (I, for example, have never been annoyed by the characteristic “click” of the camera shutter) on your iPhone, but I really hope that for some good and kind purposes - as our beloved Minister of Sports says, “that’s all.” there must be criminal know-how" :). And since the goal is good, then you can help! After all, this is exactly what this site was created for!

In fact, there are quite a large number of ways to turn off camera sound signals (and not just through settings, as it might seem at first glance). What kind of methods are these? Now we'll figure it all out...

Let's get started!

How to turn off sound when taking photos without jailbreak

To take photographs in silence, you don’t have to hack your iPhone or do other weird things. All actions are easy and simple to perform without using jailbreak:

Perhaps this is all from simple methods, we will move on to more radical solutions...

Turn off the camera shutter sound using jailbreak

Well, to be more precise, by replacing the corresponding file. Jelbreaking is only needed to gain full access to the system and get to the file responsible for the sound when taking photographs. I won’t tell you how to jailbreak - it won’t be possible to do it in a nutshell. Therefore, those who have it read on, and the rest can only use the methods indicated above or learn how to hack the device (if the camera clicks are very annoying).

1. We connect the iPhone to the computer and using any file manager, for example, iFunBox or iFile, open the folder along this path /System/Library/Audio/UISounds. Here you need to find the photoShutter.caf file.
2. Change its name to any name, preferably just adding 1 digit. Getting something like photoShutter1.caf. What is this for and why can’t it just be removed? It's just that this way you still have the original file and you can always return it back.
3. Download this file (link to Yandex.disk) and replace it with the original photoShutter.caf.
4. We try to take a photo and are glad that everything happens silently!

Why all these troubles with jailbreak, file system and other things?

The fact is that there are iPhone models on which the sound cannot be removed in any way other than this. They are intended mainly for sale in the markets of Asian countries (Japan, Korea, etc.), where such things are prohibited by law, which means they won’t be able to get out of it using the usual methods.

The method outlined above solves the problem completely. That is, the camera will never have sound. Well, or until you do all the operations in reverse order.

P.S. There is indeed another way to achieve noiselessness, which everyone is silent about. To do this, you just need to “like” this article. Let's try! :)

Apple produces premium smartphones, but sometimes some of the functions are difficult to figure out - out of habit after Android or just at the initial stage of use. For example, how to enable silent mode on an iPhone, as well as how to customize it to suit your needs. Let us immediately note that there are two ways to get rid of excess sound, differing in complexity and capabilities.

How to enable silent mode on iPhone

An easier option is to use the silent mode button on the iPhone. Yes, yes, the developers have installed a separate key for this, which is located on the left side of the smartphone, just above the volume control.

In its normal state, the switch directs all sounds to the device's speaker. To turn on silent mode on your iPhone, move it as shown in the figure. If everything is done correctly, an orange background will become visible. In this mode, the device will not sound notifications or calls. By default, the device will notify you of a call/notification by vibration.

Features of silent operation

Please note that this silent mode on iPhone 6 and subsequent models does not affect other sounds. Accordingly, if you set an alarm clock in the Clock program, it will still play. The same applies to music playback or special effects in games.

Another feature is that if you set the iPhone to silent mode as described above when a headset is connected to the smartphone, the sounds in it will still be heard. That is, the “silent” button exclusively affects sound reproduction through a regular speaker.

Finally, you need to keep in mind that in silent mode, the smartphone will still automatically turn on the screen when a new message arrives or show a notification when necessary. This won't hurt if the iPhone is in your pocket or bag, but if it's in sight, this behavior can be distracting.

Setting vibration

If you want to fine-tune this mode, you need to refer to the settings. Before the 7th model, to do this, you must first go to “Settings” and then open the “Sounds” section. On devices from the seventh iPhone and newer, another sub-item is used, which is called “Sounds, tactile signals”.

At the very beginning it is indicated when the device should use vibration. If you don't want it to buzz when you activate the Quiet feature, move the corresponding slider to the left to turn it off. An alternative is to change the vibration pattern. You can choose from preset sequences or program your own. In the latter case, use the “Create vibration” sub-item, and then draw the desired signal pattern in graphical mode by touching your finger.

In the same section you can get rid of other sound signals. For example, if you want to not only remove calls/vibration, but also disable the clicking of the virtual keyboard when typing or the signal that is given when the system is locked or unlocked. In this case, scroll through the settings to the appropriate item and deactivate it.

Do Not Disturb Mode

As you can see, there are a lot of limitations to using a mechanical switch. Therefore, Apple has provided another way to enable silent mode on the iPhone. And even without displaying notifications and other distractions, in order to maintain the blocking state to the maximum and not once again distract the owner’s attention - for example, at an important meeting, during classes, or while the owner is meditating.

The name of this function is self-explanatory – Do Not Disturb mode. The easiest way to activate it is using the remote control. To do this, swipe from the bottom up, from the bottom edge of the display (in the iPhone X everything was changed a little, you need to swipe from the top right corner).

You can also go to quick settings directly from the control panel. To do this, you do not need to touch the icon, but press it with some force. The system will display a menu with different options - activate for a specific time while you are in the same place or for the duration of a scheduled event.

Another way to set your iPhone to silent mode is through the settings. There is a special item dedicated to it in the device menu. It is convenient because it allows you to more accurately change the mode parameters.

For example, you can switch the device to permanently quiet mode. If you need to specify a specific time frame, use the Scheduled radio button and then specify a period. This makes it convenient to turn off notifications at night.

Additionally, you can specify a list of contacts whose calls the phone will allow to attract your attention. To do this, select the appropriate item and mark “favorites”.

More detailed settings can be found in the official Apple Help: https://support.apple.com/ru-ru/HT204321 .

In addition to more effectively muting signals, Do Not Disturb mode solves the issue of how to turn off the sound on an iPhone if the button does not work - after all, it is activated regardless of the keys.