Firmware for alcatel one touch phone. Firmware or flashing of Alcatel phone, smartphone and tablet

Most owners of ultra-fashionable smartphones or Alcatel smartphone model u5mini white on the Android operating system with a dpi screen believe that it is impossible to change the firmware in these gadgets on their own, but they are deeply mistaken.

The reasons why you need to flash a phone, an Alcatel smartphone model u5mini white on the Android operating system with a dpi screen, are very diverse: when the device completely refuses to turn on, if it spontaneously starts to reboot, you need to restore the software after an unsuccessful installation, or you just want to install the most new firmware version.

Firmware Flashing of Alcatel shine lite 5080x, 4 power plus, 2051d metal and other models.

- You can do the firmware yourself on all phones, Alcatel smartphone model u5mini white on the Android operating system with a dpi screen.

In addition to the topic of firmware on Android smartphones, there is a review article: . It describes in detail, there is a video instruction on how to reflash a mobile device to Android kit kat.

In what cases should you update the firmware of smartphones, Alcatel smartphone model u5mini white on the Android operating system with a screen - dpi and for other models:

If the phone does not turn on, although the reason may not be in the firmware;

If the phone constantly glitches and reboots;

If the firmware is unsuccessful and the phone needs to be returned to its original state;

If you need to install the latest, most modern firmware version;

Download firmwares, programs, flashers and Alcatel firmware.

Free firmware for Alcatel phone.

- official website of the manufacturer of cell phones Alcatel a3 5046d, lte mini 6012x, 5054d. By clicking on the link, you can select the required phone model and download programs and firmwares for free on your Alcatel a5 led 5085d, 5023f, 5051d phone. The Alcatel manufacturer's website contains the most current and latest firmwares for Alcatel 4013d phones with a screen. different alcatel models.

Alcatel firmware instructions.

How to properly flash a smartphone. Instructions for firmware using the example of an Alcatel 4013d, 4034d phone.

On your smartphone, go to Settings->Developer options and enable USB debugging.

We connect the USB cable from the phone to the computer and install the firmware.

Disconnect the phone from the computer, turn it off and remove the battery.

We launch the SP Flash Tool program on the computer, it is needed to upload new firmware to the phone.

In the program window, click the Scatter-loading button and in the window that opens, select the file MT6589_Android_scatter_emmc.txt (you can find it in the folder with other files of the new firmware). After opening, the program will contain all the paths to the files necessary for the update.

Be sure to uncheck the first item - PRELOADER (otherwise the phone will not boot).

Now click the Download button. We answer “Yes” to any pop-up messages.

We connect the smartphone (using a USB cable) to the computer, the new firmware will begin to be uploaded to our device automatically.

When the process is complete, a window with a green circle will appear. You can disconnect your phone from your PC and turn it on.

For more information on how to do this, see the video instructions:

To search for firmware on the Internet, you need to know the model of your phone that you will be flashing. You can quickly find out your phone model and firmware version by typing the code in your phone *#0000# .

Instructions for flashing Alcatel 4013d, 4034d

One more example. Instructions for flashing firmware for Alcatel 4013d, 4034d mobile phones.

Firmware for Alcatel 4013d, 4034d phone: download firmware for

Firmware Alcatel 4013d, 4034d

1. To update the firmware on Alcatel 4013d, 4034d you need to download the firmware from the link above, the Smart Phone Flash Tool loader and USB firmware.

2. Turn on the phone, connect the USB cable and install the firmware.

3. After installing the firmware, turn off the device.

4. Run the loader program "Flash tool.exe".

5. Click “Download Agent” and select the “MTK AllnOne DA.bin” file (in the downloader folder).

6. Click “Scatter-loading” and select the file “MT6573 Android scatter.txt” (in the folder with the firmware).

7. Uncheck “PRELOADER”, click on “Download” and connect the USB cable.

8. After loading the firmware, the bootloader will show the software installation status.

Note: When you connect your phone, the program should see it and start flashing the firmware. If the phone is not detected, then disconnect it from the computer, remove and insert the battery and reconnect it to the computer

Instructions for flashing Alcatel from the mobile version of the site.

And another example of firmware for an Alcatel 4013d, 4034d smartphone. Other phone models are flashed similarly. The main thing is to find the right firmware for your phone model. You can find them on the Internet via Yandex. I can also recommend a good site with firmware

So, we take the Alcatel 4013d, 4034d firmware as an example.

The first thing you need to do is download the firmware itself. It is presented as an archive in zip format. There is no need to unpack it, since you can reset it to an external storage medium, that is, an SD card.

The next thing to do is turn off the phone and fully charge its battery. After the battery is fully charged, you need to remove the charger and take out the battery, and after about 30-40 seconds put it back into the phone.

Next, press the power button and hold it for 1-2 seconds, while simultaneously pressing the key that decreases the volume. These two buttons must be held until the manufacturer's logo appears on the phone screen - Alcatel 4013d, 4034d. After this, you need to release the on/off key, but you must hold down the volume down until the Android logo appears. After it appears, you need to release the volume button and press up once, that is, increase the volume. We use the same button when moving through menu items, and select the required option with the power key. Select the menu item “apply update from external storage”, then select the archive that was saved to the external storage medium.

This completes the firmware for Alcatel 4013d, 4034d. As you can see, there is nothing difficult in the process of installing an operating system on a phone and you can actually do it yourself, without resorting to the paid services of service centers or self-taught “handicraftsmen”.

But it should be noted that in case of incorrect actions when flashing the phone, it can be irrevocably damaged, turned into a “brick” - a useless and good-for-nothing piece of plastic and iron. Therefore, if you are not confident in your abilities, then it is better to entrust the flashing of a mobile phone or tablet to experienced programmers from an electronics repair service.

It is best to download firmware for modern Alcatel models from the official website of the phone manufacturer; this can be done by clicking on the link: download

To download proprietary software, use the link: official website firmwares. Here is a description of how to find a driver for your phone.

From the link above in the text you can download for free and read a description of how you can make firmware for the Android phone Alcatel 4013d, 4034d and other models. This page contains a video review and instructions on how you can reflash your smartphone yourself; here you can download the firmware for your phone for free through the official website.

How to independently flash Android on the Alcatel 4013d phone model on the Android OS platform on the screen with resolution, type, program on the computer Instructions for flashing, download and change the firmware on the Alcatel y850v0 black, 2008g silver, u5mini white, 5010d, 1016d, 4013d, 4034d phone , 5045d, shine lite 5080x, 4 power plus, 2051d metal, 1035d dark, 4024d first, 5 star 5022d, shneider electric dual sim 4027d, windows phone, lucent gold white 2007d, 1020d, 6045y, 5017d, 5015d, a3 , lte mini 6012x, 5054d, 2004c, a5 led 5085d, 5023f, 5051d, 4047d, 5019d, 5017x, 5042d, 5065d, 4035d 4g, a7, u3, 5044d, 3v, 4049d, 4s k, 5056d, move time, 5038d, 5015x, 7044x, 8050d, 1009x, 208, slate 5017, go play, u5 5047d volcano, 7047d, 7048x, d3, 3c, one touch 5040x, one touch pixi 3, OT 4009D, one touch pop c7, one touch pop c5, 2012d, one touch 7041d, idol 3 6039y, pop c9, one touch 5036d, hero, 4032d, 8, 4007d, one_touch_5042d, idol_mini_6012x, one touch pop 3 5025d, one touch c2, idol s, idol 2 6037y, one touch star, 8008d, one touch 4030d, one touch 985d, one touch 720, one touch view, one touch 922, one touch 818, 990, one touch 993d, one touch 992d, t20, t10, onetouch idol, 918d, 5020d, 991 free through the official website .

Popular reviews on Alcatel

	Cuts launch quickly on the phone and do not take up much space in the phone's memory.
	You can learn more about how to Download Alcatel music for free here, to do this, follow the link above.
	Here you can find the latest and most current drivers for Alcatel mobile phones and tablets. This link contains the correct, correct programs and the latest versions of drivers for Alcatel mobile devices.
	Where to download and how to install the application for free - Traffic Rules with questions and answers and explanations on Alcatel

Alcatel One Touch S"POP 4030D is a once French smartphone that runs on Android 4.1 and has a rating of 3 out of 5 for power. This smartphone is quite productive. Here you can download firmware: custom or factory. You can also learn how to get root (superuser rights) or reset settings.

Root Alcatel One Touch S"POP 4030D

How to get root for Alcatel One Touch S"POP 4030D see instructions below.

Initially, try universal utilities to get root on MTK for the One Touch S"POP 4030D model

(root in one click)
(a collection of root utilities in one)

If it doesn’t work and SuperUser doesn’t appear, then ask for help in a special topic

Characteristics

Standard: GSM 900/1800/1900, 3G
Type: smartphone
Operating system: Android 4.1
Case type: classic
Case material: plastic
Number of SIM cards: 2
Weight: 122 g
Dimensions (WxHxD): 61.2x115x12.2 mm
Screen type: color TFT, 262.14 thousand colors, touch
Touch screen type: multi-touch, capacitive
Diagonal: 3.5 inches.
Image size: 320x480
Pixels per inch (PPI): 165
Automatic screen rotation: yes
Type of ringtones: polyphonic, MP3 ringtones
Vibration alert: yes
Camera: 3.20 million pixels, 2048x1536
Video recording: yes
Max. video resolution: 640x480
Max. Video frame rate: 30fps
Geo Tagging: yes
Front camera: yes, 0.3 million pixels.
Video playback: H.263 MPEG4, H.264
Audio: MP3, AAC, WAV, FM radio
Voice recorder: yes
Headphone Jack: 3.5mm
Interfaces: USB, Wi-Fi, Bluetooth 4.0
Satellite navigation: GPS
A-GPS system: yes
Internet access: WAP, GPRS, EDGE, HSDPA, HSUPA, email POP/SMTP, email IMAP4, HTML
Processor: MediaTek MT6575, 1000 MHz
Number of processor cores: 1
Video processor: PowerVR SGX531
Built-in memory: 4 GB
Amount of memory available to the user: 2 GB
RAM capacity: 512 MB
Memory card support: microSD (TransFlash), up to 32 GB
Additional SMS features: text entry with dictionary
MMS: yes
Battery type: Li-Ion
Battery capacity: 1400 mAh
Talk time: 5:00 h:min
Waiting time: 254 h
Operating time while listening to music: 35 hours
Speakerphone (built-in speaker): yes
A2DP profile: yes
Sensors: light, proximity
Search by book: yes
Exchange between SIM card and internal memory: yes
Organizer: alarm clock, calculator, task planner
Contents: phone, battery, Micro-USB charger, Micro-USB data cable, stereo headset, quick guide

Review of Alcatel One Touch S"POP 4030D

I've had my smartphone in my hands for 10 months now. Cool device, the modem is excellent, the camera is enough, speakers from the computer, radio music, from morning to night in the garage, the charge is minimal, the Internet does not slow down, I am happy with two SIM cards... If you also take into account that the price is 1990 rubles... +200 film.
A very convenient phone, there were no problems until the system broke.

Firmware for Alcatel One Touch S"POP 4030D

Official firmware with the latest SVN update: 01003 -
Custom firmware AOSP 4.1.1 -
Emotion L V1 (for flashing via stock recovery) -

Firmware for Alcatel One Touch S"POP 4030D can be found in the thread. In addition, first download the necessary software for flashing

What information do you need to know for flashing?

Brand/model [desirable] - Alcatel/One Touch S"POP 4030D
Processor - MediaTek MT6575, 1000 MHz
LCD Driver (version)
Kernel (version) [desirable]

Before flashing and during the firmware selection process, check the basic technical characteristics (technical characteristics) through the program

What custom firmware are there?

CM - CyanogenMod
LineageOS
Paranoid Android
OmniROM
Temasek's

AICP (Android Ice Cold Project)
RR (Resurrection Remix)
MK(MoKee)
FlymeOS
Bliss
crDroid
Illusion ROMS
Pacman ROM

Problems and shortcomings of an Alcatel smartphone and how to fix them?

If the One Touch S"POP 4030D does not turn on, for example, you see a white screen, hangs on the splash screen, or the notification indicator only blinks (possibly after charging).
If stuck during update / stuck when turned on (needs flashing, 100%)
Doesn't charge (usually hardware problems)
Doesn't see the SIM card
The camera does not work (mostly hardware problems)
The sensor does not work (depends on the situation)

For all these problems, contact (you just need to create a topic), specialists will help for free.

Hard Reset for Alcatel One Touch S"POP 4030D

You can do it in a very simple way:

Settings->Backup and reset
Reset settings (at the very bottom)

How to reset a pattern key

How to reset the pattern key if you forgot it and now you can’t unlock your Alcatel smartphone. On the One Touch S"POP 4030D model, the key or PIN code can be removed in several ways. You can also remove the lock by resetting the settings; the lock code will be deleted and disabled.

Reset graph. blocking -
Password reset -

Android smartphone Alcatel One Touch Pixi 3 (4.5) 4027D is an entry-level device that has gained popularity among undemanding users. If practically no problems arise with the hardware of the device during its operation, then the system software quite often causes complaints from the owners of the model. However, these shortcomings can be easily eliminated using firmware. Several ways to reinstall Android on your device are discussed below.

Alcatel One Touch Pixi 3 (4.5) 4027D, if we talk about procedures for installing system software, is a completely ordinary smartphone. The Mediatek hardware platform on which the device is built involves the use of standard software tools and methods for installing system software into the device.

Despite the fact that it is almost impossible to damage the hardware of the device using the firmware methods described below, the following should be taken into account:

Each manipulation of the owner with his device is carried out by him at his own peril and risk. Responsibility for any problems with the smartphone, including those caused by the use of instructions from this material, lies entirely with the user!

Before proceeding with rewriting the Alcatel 4027D memory to equip the device with new software, you should somehow prepare the device and the PC intended to be used as a tool for manipulating the device. This will allow you to reinstall Android quickly and seamlessly, protecting the user from data loss and protecting the smartphone from loss of performance.

Drivers

The first thing you need to take care of before starting operations with the Pixi 3 using flashing programs is the correct pairing of the phone and computer. This will require installing drivers.

In the case of Alcatel smartphones, to install the components necessary for pairing the device and PC, it is advisable to use proprietary software for servicing the brand’s Android devices - SmartSuite.

This software will also be needed in the next preparatory step, so we download the application installer from the official website. In the list of models you need to select "Pixi 3 (4.5)".

If any errors occur during the driver installation process or the smartphone is not detected properly, you should use the instructions from the article at the link below.

Data backup

Of course, completely reinstalling the operating system of any Android device is associated with certain risks. In particular, with almost 100% probability, all contained user data will be deleted from the device. In this regard, before installing system software in Alcatel Pixi 3, care should be taken to create a backup copy of information that is valuable to the owner. The Smart Suite described above makes it very easy to save information from your phone.

If you plan to install modified versions of Android, it is recommended that in addition to saving user data, you create a complete dump of the installed software. The process of creating such a backup is described in the article at the link below.

Launching recovery

When flashing Alcatel 4027D firmware, there is often a need to boot the smartphone into recovery. Both the factory and modified recovery environments start the same way. To reboot into the appropriate mode, turn off the device completely, press the "Volume Up" and, while holding it, the button "Inclusion".

Keep the keys pressed until the recovery environment menu items appear.

Firmware

Depending on the state of the phone and the goals set, that is, the version of the system that should be installed as a result of the operation, a tool and method for carrying out the firmware process are selected. Below are described ways to install different versions of Android in Alcatel Pixi 3 (4.5), arranged in order from simple to complex.

Method 1: Mobile Upgrade S

To install and update the official version of the Alcatel system into the model in question, the manufacturer has created a special flashing utility. You can download the solution from the link below by selecting “Pixi 3(4.5)” from the drop-down list of models.

Open the resulting file and install Mobile Upgrade S, following the installer’s instructions.

Let's launch the flasher. After selecting the language, a Wizard will launch, allowing you to carry out the procedure step by step.

At the first step of the wizard’s work, we select "4027" in the drop-down list "Select your device model" and press the button "Start".

We fully charge the Alcatel Pixi 3, disconnect the smartphone from the USB port, if this has not been done previously, and then completely turn off the device. Click "Further" in the Mobile Upgrade S window.

Confirm your readiness for the memory overwriting procedure in the request window that appears.

We connect the device to the USB port of the PC and wait for the utility to detect the phone.

The following message will indicate that the model has been identified correctly: “Search for the latest software updates on the server. Wait…".

The next step is to download the package containing the system software from Alcatel servers. We are waiting for the progress bar in the flasher window to fill.

Once the download is complete, follow the instructions of the utility - disconnect the USB cable from the Pixi 3, then press "OK" in the request window.

In the next window, click the button "Update device software",

and then connect the USB cable to the smartphone.
Once the system detects the phone, recording information to the memory sections will begin automatically. This is indicated by the filling progress bar.

The process must not be interrupted under any circumstances!
Once the system software installation is completed via Mobile Upgrade S, you will be notified of the success of the operation and prompted to remove and insert the device’s battery before starting.

We do this, and then turn on the Pixi 3 by long pressing the key "Inclusion".
After loading into the reinstalled Android, we get the smartphone in “out of the box” condition,

at least in software terms.

Method 2: SP FlashTool

In the event that the system crashes, that is, the Alcatel 4027D does not boot into Android and/or it is not possible to restore/reinstall the firmware using the official utility, you should use an almost universal solution for working with the memory of MTK devices - the application.

Among other things, the tool and knowledge of how to work with it will be needed in the event of a return to the official version of the system after modified firmware, so familiarizing yourself with a detailed description of the methods for using the tool will not be superfluous for every owner of the smartphone in question.

In the example below, a “bricked” Pixi 3 is restored and the official version of the system is installed. Download the firmware package from the link below. The archive also contains a version of SP FlashTool suitable for manipulating the device in question.

Unpack the archive obtained from the link above into a separate folder.

Launch the flasher by opening the file flash_tool.exe, located in the directory with the program.

Add a scatter file to the flasher MT6572_Android_scatter_emmc.txt, which is located in the folder with system software images.

Selecting the operating mode "Fortmat All+Download" from the drop-down list,

then press "Download".

We remove the battery from the smartphone and connect the phone with a USB cable to the PC.
After identifying the device in the system, files will begin to be transferred to its memory and the corresponding progress bar will begin to be filled in the SP FlashTool window.

Once the recovery is complete, a confirmation window appears "Download OK".

Disconnect Alcatel 4027D from the PC, install the battery and start the device by long pressing the key "Inclusion".

After a long, first startup after installing the system, you need to determine the Android parameters,

and then you can use the restored device with the official firmware version.

Method 3: Modified recovery

The above-described methods for flashing Pixi 3 (4.5) assume the installation of the official version of the system 01001. There are no updates for the OS from the manufacturer, and it is only possible to truly transform the model in question in software terms using custom firmware.

Despite the availability of many different modified Android solutions for the Alcatel 4027D, we cannot recommend using firmware that is based on a system version higher than 5.1. Firstly, the small amount of RAM on the device does not allow you to comfortably use Android 6.0, and secondly, various components often do not work in such solutions, in particular the camera, audio playback, etc.

As an example, we install custom CyanogenMod 12.1 in Alcatel Pixie3. This is firmware based on Android 5.1, practically free of defects and specially prepared to work on the device in question.

The archive containing everything you need to install Android 5.1 can be downloaded from the link below. Download and unpack the package into a separate directory on the PC disk.
We place the resulting folder on a MicroSD card installed in the smartphone.

Obtaining Superuser rights

The first thing you will need to replace the software of the model in question is obtaining root rights. Superuser rights to Alcatel One Touch Pixi 3 (4.5) 4027D can be obtained using. The process is described in detail in the lesson at the link below:

Installing TWRP

Installation of custom firmware into the smartphone in question is carried out using a functional tool - a modified recovery environment.

But before this becomes possible, the recovery must appear in the device. To equip the Alcatel 4027D with the required component, we perform the following.

All further manipulations on the smartphone’s firmware will be carried out through TWRP. If you have no experience working in the environment, it is highly recommended that you familiarize yourself with the following material:

Memory re-partitioning

Almost all custom firmware for the model in question is installed on re-allocated memory.

To carry out the operation, follow the steps below, and the result is the following:

The section is reduced "CUSTPACK" up to 10MB and a modified image of this memory area is written;
The volume of the area increases to 1 GB "SYSTEM", which is possible due to the use of memory that is freed as a result of decreasing "CUSTPACK";
Expands to 2.2 GB partition "USERDATA", also due to the volume released after compression "CUSTPACK".

Installing CyanogenMod

Any other custom solution is installed in exactly the same way, only in step 1 of the instructions above you select a different package.

Additionally. Google Services

The modified version of Android installed according to the instructions above contains Google applications and services. But not all of their creators bring these components into their solutions. If the use of these components is necessary, and after reinstalling the system software they are missing, you should install them separately, using the instructions from the lesson:

In this way, an overall successful model from the well-known manufacturer of Android smartphones Alcatel is updated and restored. Do not forget about the importance of accurately following each step of the instructions and a positive result is guaranteed!

Today we will look at:

The need to update the user's device firmware may be due to various reasons. It may be necessary to upgrade to a newer version of the software (but this is forced) to improve the optimization of the device.

Or perhaps the user wants, on the contrary, to roll back his phone to the previous version of the software, since the new one is full of faults. In any case, the process of flashing the phone will consist of the same steps, which we will now discuss.

Preparing the tools

First of all, to flash the device we need a program that will flash the device. We won’t be changing everything manually ourselves, really. The name of this program is Smart Phone Flash Tool (aka SP Flash Tool). This utility can be easily found on the Internet.
Next, we need the firmware for the phone itself. That is, the version of its software. you can download the latest firmware for Alcatel One Touch 5020d. So, first the user needs to download the specified files, install the Flash Tool and create a folder, placing the firmware for the phone there.

Let's get started with the firmware

When everything is ready for the “operation”, the process can begin. We go to SP Flash Tools, having previously connected the smartphone to the computer or laptop. Important: you must synchronize the device using a USB cable.

You will immediately notice two windows. One of them is called "Download Agent". There is no need to change anything in it, everything will be set by default. And the second window is called “Scatter loading file”. In it, by clicking on the “scatter loading” button, indicate the path to the firmware file.

The list of functions will load. We change only the first two points there. Or rather, we uncheck them. All files are ready for the installation process, all that remains is to click the “Download” button.

The phone will now start installing the firmware. The user can only wait for it to end. It is impossible to name the exact time. However, you should understand that the computer should not be turned off before the update process is completed. If this causes the installation of the firmware to fail (or the user intentionally terminates it), the smartphone may simply break down. And no service centers will help restore the device. When installing firmware on your device, you must clearly understand that you are doing this at your own peril and risk.