After updating iOS 11, the speaker does not work well. Having problems downloading software for iPhone: causes and solutions

An error when updating iOS 11 may result in the system not being installed or installed incorrectly, so that using the device will be uncomfortable. Errors when downloading an update over the air or installing via iTunes can be corrected yourself, without contacting a service center.

Supported Devices

If you did not receive the iOS 11 update when you connected your device to the Internet via Wi-Fi, and an error occurred when trying to install the update in iTunes, make sure that the model supports the new version of the system.

Please note: you can install iOS 11 on the iPhone 5S, but the iPhone 5 and 5C are not on the list. So it will not be possible to install the update on them in any case; you will have to be content with the capabilities of the previous version.

Failed to check for update

Errors may occur at different stages of the update. For example, at the very beginning, even before the update is downloaded, the following message appears:

If your device supports iOS 11 but can't find the update, follow these steps:

Do a hard reboot. Press and hold the Home and Power buttons (Power and Volume Down on iPhone 7 and above) until the screen turns off.
Check your internet connection. Try connecting to a different Wi-Fi network.
Delete the developer profile if you added it to test the beta version (Settings - General - Profiles - iOS Beta Software Profile - Delete).
Try updating via iTunes.

Immediately after the release of the update, failures may occur on the side of Apple servers, which cannot cope with the influx of users. In this case, all you have to do is wait for your turn to download. If your device detects an update and starts downloading it, but the download is interrupted by an error, wait a little and try downloading the update again.

Pay attention to:

The amount of free memory space.
Internet connection stability.

If the update does not download over the air, install it via iTunes.

Problems downloading the update to iTunes

Updating via iTunes may also not be ideal. One of the common problems is error 9006, which appears when updating or restoring the firmware. A failure indicates an inability to establish a connection with Apple servers.

Error 9006 when updating iOS 11 can be resolved in the following ways:

Check your network connection. Make sure your connection is stable.
Quit iTunes and restart the program.
Install the latest version of iTunes. Update the application through the Help menu or completely remove it from your computer along with all components and install the new version downloaded from the Apple website.
Restart your computer.
Try connecting the device to a different USB port. Use the connectors that are located on the rear panel of the system unit. Avoid adapters.
Disable antivirus software and firewall for a while.

Typically, to resolve error 9006, it is enough to disable the firewall, which prohibits establishing a connection with Apple servers. The good thing about the iTunes option is that even if Apple's servers don't respond, you can download the firmware from a third-party trusted source (for example, the 4PDA site) and install it without any problems.

Hold down the Shift key and click "Restore".
Specify the path to the firmware through Explorer.

iTunes will install the new system on its own, and you will save time downloading the update.

Difficulties with installation

If you downloaded the update to your device over the air, but problems arise during the installation stage - it crashes, or the installation is too slow - try the following methods:

Hard reboot your device.
Check the battery charge level. Connect the charger.
Make sure your Wi-Fi connection is stable.

If you cannot install the update on your phone or tablet, update via iTunes. As a last resort, you can put the device into DFU mode and then perform a recovery. With this approach, the likelihood of errors occurring is minimal.

If after an update your iPhone stops working or the screen is frozen,

The first version of iOS 11 brings new features, improvements, bug fixes and security improvements to iPhone, iPad and iPod touch users. But in addition to new features and security improvements, it also brought its own collection of bugs and problems.

In this article, we'll walk you through how to fix the most common iOS 11 problems. If you notice battery issues, Bluetooth issues, or random restarts, check out this list of fixes before you contact Apple Support.

Problems installing iOS 11

Photo Sometimes there are problems at the installation stage

Installation problems are one of the most common problems in every new version of iOS, and iOS 11 is no exception.

For some users, the download simply stops and nothing happens. This is a very common problem and can be fixed in seconds.

If iOS 11 won't download, hold down the Home button and the Power button (Volume Down and Power button on iPhone 7/iPhone 7 Plus) at the same time to restart your device.

The iPhone or iPad should automatically shut down within 10 seconds and boot should continue as normal after that.

The device does not connect well to the network

If you keep losing connection after installing iOS 11, go to Settings → General → Reset and select Reset Network Settings. This should solve the problem.

Battery problems

If you notice immediately after installing iOS 11 that your phone is draining in a matter of hours, there is no need to panic. Rapid battery drain is an extremely common problem for iPhone and iPad users after upgrading to a new version of iOS.

It is worth opening the energy saving tab and seeing which application is draining the battery. There you will also see tips for increasing battery life.

There is a chance that your battery has reached the end of its life and needs to be replaced.

How to solve Bluetooth problem in iOS 11

Bluetooth problems are extremely annoying and very difficult to fix. If Bluetooth has stopped working as it should, here are some tips that may help it come to its senses.

First try removing the connection that isn't working.

Go to Settings > Bluetooth > select the connection using the “i” in the circle > and tap “Forget about this device.” Try connecting again.

If this does not help, let's try to go further and reset the network settings.

Go to Settings > General > Reset > Reset Network Settings. This will take a few seconds and your device will forget all known Bluetooth devices. Connect and check if your device is installed correctly.

You can also try resetting all your settings to factory defaults. Go to Settings > General > Reset > Reset All Settings. This will take a few minutes.

If you are dealing with Bluetooth problems in your car, you need to consult your car's manual. If all else fails, then it's time for Twitter wars with Apple tech support.

Buttons in Control Center do not disable Wi-Fi and Bluetooth

Photo Wifi and Bluetooth buttons now only break the connection

In iOS 11, pressing the “Wi-Fi” or “Bluetooth” button does not disable these functions, but only disconnects the device from the access point and breaks the connection with all Bluetooth-connected devices except Apple Watch and Apple Pencil.

To completely turn off Wi-Fi and Bluetooth, you need to go to “Settings” and turn them off in the appropriate sections.

How to fix Wi-Fi problems

iOS 11 users are complaining about various Wi-Fi issues. If after the update your connection speed has dropped and interruptions have appeared, then it’s time to do something about it.

Before you blame your phone and Obama, you should take a look at our router. Try turning it off and on.

This tip seems extremely stupid, but it solves over 70% of problems with any device, just think about it

If you can't access the router you're using, or if you're sure it has nothing to do with it, it's time to dig into the settings.

If the network does not work, then you can forget about it

The first thing you need to do is to forget about the Wi-Fi network that is giving you problems. Go into your settings > Wi-Fi > Select your connection by tapping the "i" in the circle > and tap "Forget this network" at the top of the screen.

If this doesn't work, go to your Settings app > General > Reset > Reset Network Settings. This will also make your device forget Wi-Fi passwords, so it will be convenient for them.

If all else fails, go to Apple's guide to Wi-Fi problems.

How to fix Touch ID problems

Photography Problems with Touch ID are quite rare, but they can also be unpleasant

If Touch ID stops working, first make sure there are no foreign substances (water, oil, paint) on your fingers and then read on.

If you are sure that this is not a problem, add the fingerprints again. Go to Settings > Touch ID & Passcode > Enter your password.

On the next screen, tap each fingerprint mark and select Remove Fingerprint. When this is complete, click "Add a fingerprint..." to re-set up your Touch ID.

How to fix sound problems

If you are experiencing audio problems (distortion, unclearness, no sound, etc.), then we have something to offer you.

First, reboot your device. Turn off your iPhone or iPad and turn it back on to see if the problem is gone.

If this doesn't help, look inside the speaker grill and check for debris. If you notice something, carefully remove it and see if your sound improves. If this doesn't work, try turning Bluetooth off and on.

If you are facing an issue with a particular app, you should download the latest update and see if that helps.

How to improve iOS 11 performance

If after the update your phone lags and freezes, then you are not alone. Other iOS 11 users are facing the same issues. What can you do to get rid of lags and freezes:

Reboot your device often
Clean your device of old files and junk
Update your apps to the latest versions
Disable widgets
Clear your browser cache
Disable background processes
Reduce animation

How to Fix Flip Issues in iOS 11

If your device doesn't want to flip out of portrait orientation after updating to iOS 11, here's what you can try.

First try locking and unlocking your device. Press the power button and unlock your phone using your PIN or fingerprint to find out. In some cases, this simple manipulation helps

If this doesn't help, try restarting your iPhone or iPad.

And if that doesn't work, you can try turning off Motion. To do this, go to Settings > General > Accessibility and Turn Off Motion.

How to Fix PC or Mac Connection Problems in iOS 11

If you can no longer connect your device to a Mac or PC running iTunes, we have a solution.

Make sure you are using the latest version of iTunes. In iTunes, select the iTunes tab in the top left corner and click About iTunes. Current version is 12.7.

If you are using an older version, download the latest update via the iTunes tab > Check for Updates. You can also find the appropriate file at this link.

If you're using a Mac, remember that you must be running OS X 10.9.5 or later to support iTunes and iOS 11 devices.

If you're using a Windows PC and a firewall, check out this guide from Apple. There is a chance that your firewall will block your sync.

How to fix problems with iOS 11 Mail

Outlock Photo is temporarily not working in the default email client.

If you have Outlook.com, Office 365 and Exchange 2016 accounts, then you have probably already seen an error in the standard Mail application in iOS 11 - letters are moved to the “Failed to Send” folder, and the system notifies that the server rejected the message.

To solve this problem, you can download the free outlook client for ios from the app store. Outlook for iOS fully supports various email services, including outlook.com, office 365 and exchange server 2016. If you do not want to download anything, then you will have to wait for an update with fixes for this error.

Microsoft, in turn, released a crutch solution.

Apple promises to fix this error in the next update.

How to solve a problem if it is not on this list

If you can't find a fix for your iOS 11 problem on this list, here are some recommendations.

Forums

If you want to try to find a solution without leaving home, go to the Apple discussion forums and ask for help. Be sure to do it in the right place.

Rollback to an earlier version

If you can't find what you're looking for, you may want to consider downgrading to iOS 10.3.3.

Apple Support

You can also write to Apple support through your Twitter account. You can also find Apple support on the company's website.

If nothing works, then it's time to roll back to factory settings

Once you have copied all your files, go to Settings > General > Reset > Erase All Content and Settings. Again, this method should only be used as a last resort.

When you plan to update your iPhone iPad to iOS 11.1/11/10 via WiFi, but your iPhone does not see the update in the settings or displays a message. "Unable to check for updates." An error occurred while checking for a software update. Go through all the steps to fix it easily.

I can't update the software on my iPad. Apple online support says to go to Settings/General/Software Update? I'm trying to update to ios 11. The problem is that the iPhone does not see the update, there is no software update to choose from. I've looked everywhere for it and can't find it. Please let me know what to do?

IPhone doesn't see iOS update, there are usually a few small things that can cause things to go wrong. Perhaps your friend installed the latest version of iOS but you don't see it as an option in Software Update, or you tried to update iOS but it doesn't want to install. Your iPhone may have been broken, or you may have lost data and found that your settings have changed after performing an update.

In this article, we will look at the most common problems that people have when their iPhone does not see an iOS update.

When Apple first launches a new version of iOS, it may take some time for the update to become available. Sometimes your friend may receive the update before you. Or maybe your iPhone is not capable of running the software, in which case you won't see the warning at all.

To run iOS 11, you will need one of the following devices:

iPhone X	iPad Pro 12.9-inch (2017)	iPad 4th generation
iPhone 8 or iPhone 8 Plus	iPad Pro 12.9-inch (2015)	iPad mini 4
iPhone 7 or iPhone 7 Plus	iPad Pro 10.5-inch	iPad mini 3
iPhone 6s or iPhone 6s Plus	iPad Pro 9.7-inch	iPad mini 2
iPhone 6 or iPhone 6 Plus	iPad Air 2	iPod Touch 6th generation
iPhone SE	iPad Air
iPhone 5s	iPad 5th Generation

Plus any new Apple devices with iOS.

If you have an iPhone 5C and an iPhone 5 or anything older, you're out of luck! iOS 11 will not work on your iPhone.

Additionally, another very common iOS 11/10 update error is when you go to Settings > General > Software Update and install the newest version on top of the old one. Also, the iPhone does not see the iOS update, it does not appear at all or displays the message “Unable to check” for updates. An error occurred while checking for a software update." Especially since iOS 11.1/11 was released, many users encountered this situation and asked why iOS 11.1/11 is not showing up in Settings?

This problem can occur due to various factors. But don't worry. You can try the following tips to help your iPhone 8/X/7/6s/6/5s see the update.

Make sure Apple servers are working properly

Sometimes Apple servers have problems, and at this time you decide to update your iPhone or iPad to iOS 11.1 / 11. Your iPhone will not see the iOS update, or you will not be able to check the problem with the update. So, the first thing you need to do about this problem is to visit the web page.

If Apple's system status is yellow, then there is something wrong with that server at the moment. And all you can do is wait or contact Apple support. If all servers are green, it means they are all working normally. Then you need to move on to the next step below.

Most often, the iPhone does not see the update due to a profile conflict.

You may have a profile conflict on your Device. Because of this, your iPhone does not see the iOS update. In such a situation, if you delete the profile, the problem will not be solved; to receive further updates, follow these steps:

Step 1: Reset all settings

Go to Settings -> Basic -> Reset all settings .

After this, you will be asked for a Master Password, enter it and wait until your iOS reboots.

Step 2: Reinstall the profile

Now you need to re-install the profile, no matter what public or developer you have.

Go in Settings -> Basic -> Updates.

Check if a new version of iOS is available. If all else fails, perform an iOS restore.

Tip 1: Make sure your iPhone is connected to Wi-Fi

Over-the-air updates require iPhone and iPad to be connected to Wi-Fi and battery capacity of 50% or more. (We sincerely recommend putting it on charge). If Wi-Fi is connected, you can also turn it off and turn it back on after a few minutes.

If your iPhone still doesn’t see the iOS update in the settings or you can’t check for updates. Try to force restart your device: Press and hold the On/Off button.

Continue holding the On/Off button, then press and hold the Home button > Hold them until the screen turns on and shows the Apple logo. Then go to Settings > General > Software Check, your iPhone should see the iOS update.

Sometimes this happens due to the network. You can reset it on your device to do this: Go to Settings > General > Scroll down to Reset > Tap Reset Network Settings.

If you downloaded the iOS 11.1/11 beta on your iPhone or iPad, it won't appear in settings due to this. You must first uninstall the beta version and then proceed to update. How to remove beta version? Settings > General > Scroll down to Profiles and Device Management > Click on the beta version and delete that profile.

Tip 5: Update iOS 11.1/11/10 using iTunes or iCloud

If all the above methods do not work, then the last option we can think of is to abandon the OTA and turn to iTunes for help. We have also prepared a practical guide to help you update iOS 11.1 / 11/10 in all ways: ?

Let's summarize

Using these methods, you can fix the problem iPhone does not see iOS 11.1 / 11 / 10 update in settings. We really welcome any other method, if you have one or more please share it in the comments below. To help more people suffering from this in iOS 11.1/11 does not appear on iPhone or iPad.

Some users have encountered the fact that their screen does not work after updating iOS 11. The problem appears on iPad and iPhone and is not widespread, but quite common, judging by posts on various forums.

Touchscreen malfunctions

The exact cause of the problem cannot yet be determined. The problem manifests itself in different ways:

The touchscreen completely falls off, that is, the screen does not respond to user actions at all.
Part of the display begins to flicker and stops working.

Errors appear after installing iOS 11 and can only be resolved by rebooting the device or restoring via DFU.

Force device reboot

The failure of the touchscreen after an update is a software error, so you can fix it without contacting a service center. First of all, reboot your device. If the screen does not respond to touch at all, perform a forced reboot.

Press and hold the Home and Power buttons (Power and Volume Down on iPhone 7 and above) for 10 seconds. The screen should go dark.
Release the buttons. If an apple does not appear on the screen, briefly press the power key.

A hard reset should not be used too often, so if touchscreen problems continue to appear, move on to another troubleshooting method, which is to restore the previous stable version of iOS.

Recovery via DFU

If the screen does not work after installing the iOS 11 update, and a forced reboot does not help, perform a recovery with the installation of iOS 10.3.3. Download the firmware for your device and start putting your phone/tablet into DFU mode.

Connect your iPhone/iPad to a computer running iTunes.
Press Home and Power at the same time. Hold for 10 seconds.
Release Power and continue to hold Home. Within 15-30 seconds, iTunes will display a message indicating that the device is in recovery mode. The iPhone/iPad screen will remain black.

If iTunes doesn't show a message saying your device is in recovery mode, it means you've lost count of the buttons you've held down. Take a stopwatch and try entering the phone into DFU again.

After recovery in DFU mode with firmware rollback, all data will be deleted from memory. To avoid losing them, make a backup copy.

To roll back to iOS 10.3.3.

Once the installation is complete, you can restore your iPhone as new or return data from a backup taken before updating to iOS 11. On iOS 10.3.3. There are no software glitches in the touchscreen operation, so the problem is solved. All that remains is to wait for the release of the next update with bug fixes for iOS 11.

Just recently, a new version of iOS 11 was released, which has many new features, and many were very happy about it. But it turned out that not everything was so smooth. More and more often on forums you can see texts thatThe screen does not work after the update or the display backlight is dim. And this applies to many models, starting from the iPhone 5 and including the iPhone 7 and iPhone 7+.

The problem looks like this: the touchscreen does not work completely or you have to restart the device all the time. This problem occurred on those devices on which the display module had already been changed and a non-original screen had been installed. Most likely, youiOS11 there is a mechanism that verifies the digital signature of all components, and therefore display replacement iphoneto a non-original one caused a malfunction of the touchscreen.

What should I do if the sensor stops working after the update?

If not sensor works after updateiOS 11 and, if the screen on the device has already been changed, then there are several options for solving the problem.

First. You need to replace the gadget screen with the original or with a module with the original display and a copy of the glass.

Second. Rollback iOS 11 firmware to iOS 10.3.3

What to do if you don’t want to change the screen or roll back iOS?

Currently in technical serviceApplethe number of requests has exceeded several thousand, but there is still no clarification from the company on this matter. However, users who contacted the company’s technical support service write that the corporation’s engineers are doing everything possible to fix the problem as soon as possible. It is known that in a couple of weeks, and maybe longer,Applewill release the corresponding updateiOS 11 and in it sensor failure after updatethe new version will be eliminated. But these are just words. Most likely, this is to protect the company from unauthorized displays. And in the future, iPhone will only support original display modules.

Those who updated the gadget toiOS 11 and encountered a problem thatDisplay stopped working after update and does not want to change the screen or rollbackiOSmust wait for an improved update to come out that no longer contains the glitch. However, if you don’t want to wait weeks for an update to come out and you need your device to work perfectly right now or you have other problems with your devices, contact our service center!

Our employees have extensive experience working with all types of mobile devices and can quickly and efficiently fix this and other types of faults. Our prices compare favorably with others!

Contact us at:

m. Moskovskaya. st. Altayskaya 23, “Service Center - iReMob”