Preparing to configure Windows 7. Preparing to configure Windows do not turn off the computer

To print text vertically or at any desired angle in word. You need to follow a few simple steps. Let's look at one of the options using a table. Go to the “insert” section, then “table”, select the required number of columns and rows. Right-click on the cells and select “text direction”. Select the direction of the text. To make the table borders invisible, click on...

To enable writing text vertically in excel or text in excel at any angle (applicable to excel 2003, 2007, 2010, 2013, 2016), you need to follow a few simple steps. Select the cells in which we will set the direction of the text. Right-click on the selected cells, in the context menu click on the “cell format” item, then in the window that opens select...

Today’s article will talk about how to start the PSU (Power Supply Unit) of your computer without the participation of the system (motherboard), i.e. the startup will occur autonomously. All currently produced power supplies can be started using a regular paper clip or a piece of wire! To do this we will need: A power supply unit (PSU), there is no need to remove it from the computer, just pull out the largest one...

So, after turning on the computer/laptop we have the message “BOOTMGR is missing Press Ctrl+Alt+Del to restart“. Typically, this error occurs after experimenting with hard drive partitions. The solution to the problem will be considered using Windows 7 as an example. To resolve this error, you need to insert a disk with your operating system and boot from it. Next, select the language and other parameters, click...

Obviously, any Windows user, when shutting down or restarting their computer, very often saw the message “Preparing Windows. Don't turn off your computer." This is normal and concerns either the initial system setup or the installation of important updates. But there are also situations when the message does not disappear from the screen for a long time, and the terminal does not turn off or the system does not start when rebooting. What is the reason for this, how to get rid of this problem, read on.

Preparing Windows

We will not consider installing the system now. Apparently, the message “Preparing Windows. Do not turn off the computer” is mostly associated with when operating system files are copied to it, and it is not possible to run them for initial setup. Here you will have to either check the disk initially, or change it altogether.

Another thing is installing updates. Indeed, after the download of critical packages is completed, the message “Preparing Windows. Do not turn off the computer" indicates that the system is integrating and configuring them. But freezing or looping of these processes can appear completely unexpectedly.

“Preparing Windows” hangs on the screen for a long time. Don't turn off your computer." Reasons for freezing

What could cause this behavior of the operating system? Apparently, no one can pinpoint the exact reason. But in most cases, it can be assumed that such a failure is associated with the services that oversee the search and installation of downloaded packages.

In other words, failures are observed in the Update Center. Either its components are damaged, or the service is not working correctly, or something really happened to the hard drive. Get rid of the situation where the “Preparing Windows. “Don’t turn off the computer” hangs for too long, and the system shows no signs of life; a normal reboot is impossible (the message may appear again during a restart). Therefore, radical methods will have to be used.

How to solve the problem in the simplest way?

The first proposed solution is to use a safe start. For systems below the tenth version, at the very beginning of the boot, you must use the standard entry to the extended menu by pressing the F8 key, after which the boot of the last known good configuration is selected.

If this does not help, and upon restart the message “Preparing Windows. Do not turn off the computer” does not disappear from the screen for a long time, working with updates again, you can force the system to reboot several times in order for automatic recovery to start.

If this does not happen, the best option would be to boot in safe mode, after which you will need to roll back yourself, using either the standard recovery partition in the Control Panel, or by launching the command console with the line rstrui.exe and then selecting a rollback point.

Note: in different builds of Windows 10, entering safe mode can be done through the diagnostic menu or when starting from removable media.

Disabling Update Center

So, we assume that the system did boot into safe mode. The first step is to deactivate the Update Center service.

In an OS below the tenth modification, you can disable it directly in the corresponding section of the Control Panel. In Windows 10, this procedure is performed exclusively through the services section. We will start from this section, since this solution is universal for all Windows systems.

First you need to enter the editor using the “Run” console and the services.msc command, find “Update Center” there, right-click or double-click to open the parameter editing window, stop the service, set its startup type to disabled, and then restart systems.

Removing updates

However, it happens that, for example, the corresponding message in Windows 10 (“Preparing Windows. Do not turn off the computer”) appears again only because the updates have already been downloaded, but the system is stubbornly trying to configure them. To correct the situation, they must be completely removed.

To do this, boot the system in the same safe mode, go to the programs and components section, select the section for viewing installed updates and delete the latest downloaded packages. Since the service responsible for the functioning of the Update Center is in a deactivated state, it makes no sense to run a manual search to exclude failed updates. Once the removal is complete, we reboot. In theory, the system should boot in normal mode.

Other possible causes and solutions

Now briefly about why the message “Preparing Windows. Do not turn off your computer" may appear cyclically during reboot. Perhaps the situation is related to viral exposure. If starting is not possible even in safe mode, you need to check the computer with some disk program, like Kaspersky Rescue Disk, indicating scanning of all boot records, hidden objects and existing partitions.

In case of damage to the hard drive, you should start from removable media and check the hard drive itself for errors using the attributes for repairing damaged sectors.

If secure boot somehow works, it may be possible to restore the disk by using the program. Of course, there is little hope for a favorable outcome, but it’s worth a try. Reviews about this application are quite mixed, so it cannot be recommended as a must-use tool.

Now you know what to do if you see the message “Preparing windows. Do not turn off the computer.”

Sometimes it happens that the computer freezes when turned off. Let's look at this problem using Windows 7 and Windows 8 as an example. Most often, the problem is in a running program or system service. First, let's perform a diagnostic run. To do this, press +[R] and type msconfig. In the window that opens, set the switch to diagnostic startup and restart the computer. If shutdown fails, press the power key and hold for 10 seconds. The computer will shut down. Turn it on, wait for it to load and try turning off the computer. If everything is fine, run msconfig and switch to normal boot mode. Now you need to disable items in the “Startup” tab and in the “Services” tab (with the “Do not display Microsoft services” checkbox checked). If the freeze occurs at the “End session” stage, also try removing the anti-virus software. If a freeze occurs with the message “preparing to configure windows, do not turn off the computer” - there is a problem with updates. Try going to “Start” - “Control Panel” - “Programs and Features”. In the sidebar, select Installed Updates. Try deleting the last ones (from the moment the computer stopped shutting down normally). You can also understand the cause of the shutdown freeze by examining the Windows log. To do this, Start - right-click on the "Computer" icon, manage, event view - Windows - system. Pay attention to the lines with red time marks. Look at which program caused the error, and from the information you can conclude which direction to look in order to solve the current problem.

February 5, 2015 at 10:03 pm | No comments yet

It happens that Windows 10 starts to act up already at the installation stage and at the same time takes a lot of time for its installation. There can be many reasons for this behavior, but the most important of them is the low technical characteristics of the computer for the normal operation of the operating system. Yes, ten is suitable for many cars, including budget ones. Unfortunately, in this case, no one guarantees the high speed of the latter. At the beginning of its implementation, the dozen could generally take about 12 hours to install, since the first versions were unfinished by the developers:

The Windows 10 installer downloaded all language packs for each computer.
The installer contained errors that greatly slowed down the installation process.

It is very important to have sufficient disk space on your system. If the disk on which you plan to install the ten is too small, then the installation process will be accompanied by great difficulties.

After long-term use, Windows 10 becomes clogged with all sorts of junk files, system files are defragmented, and the registry becomes clogged with unnecessary keys that remain after deleting unused applications. These and many other factors contribute to Windows 10 taking a long time to start up. The ideal solution in this case would be to reset the “ten” to its original state or reinstall the OS. But this option will not satisfy every user, because even after resetting the system, the settings of many applications are not saved, and the programs themselves will have to be installed again.

Another case is when the installation or update of Windows 10 has completed, and the operating system is already slow to start. Even Windows 7 is significantly slower in terms of startup time. The reason for this behavior of the “tens” is completely different factors.

Slow startup of the old system

If the duration of loading (and even shutting down) an operating system that has been running for several months is no longer satisfactory, then it needs urgent optimization, which should be carried out periodically throughout the entire operating time of the computer.

The first reason that makes it difficult to quickly start the system is a fair number of programs in the startup list. After logging into your account, all these programs begin to load into RAM almost simultaneously. Thus, loading the desktop and preparing the computer for work slows down significantly.

In this case, you need to remove unnecessary programs from the list of automatically downloaded ones.

Call "Task Manager".

Editing the list of programs loaded after starting the OS in Windows 10 can be done through the task manager, and not in the “System Configuration” window, as was previously the case.

Click on the icon/name of each element one by one, call up the context menu and click “Disable”.

We restart the computer and evaluate the time that passes from the moment it is turned on until it is able to work in the Windows environment.

If clearing the startup list does not help, you should defragment the system volume.

During operation, Windows 10 constantly writes temporary files to the system partition and deletes them. The user also performs read-write operations. As a result, file fragments are not written to the disk sequentially, and one file is scattered across the surface of the magnetic plate. To read it, the head has to jump from track to track with each rotation of the platter, which increases the access time to such a file. And it’s very bad if one of the many fragmented documents is a system document.

Through Explorer, call up “Properties” of the system partition.
In the “Service” tab, click on the “Optimize” button.

See also: Browser settings in Windows 10

In the defragmentation utility window that opens, click “Optimize.”

We wait for the end of defragmentation or minimize the window and continue working.

If there is little free space on the system partition (less than 2-3 GB), delete unnecessary files or move some of them to another partition so that Windows 10 has at least a few GB of space to write temporary files.

The problem arose immediately after installing Ten or updating its components

The second case is what most users complain about. The computer seems to meet the system requirements and even far exceeds them, but it takes a very long time to turn on and even turn off. In this case, one of the drivers may be the culprit.

Some users noted that rolling back the driver for the Intel chipset fixed the problem, and the “ten” began to load much faster.

First of all, you need to update the software components of all computer devices. Both the update center and third-party software are perfect for this. Let's focus on the Driver Booster program, because it allows you to update not only drivers, but also system software.

We launch the program and wait for the system scan to finish.

Click “Update all” and wait until the application downloads and updates all the drivers that need it.

After the installation of the latest driver versions is complete, reboot the computer.

Special cases of solving the problem

Go to “Device Manager”.
Using the context menu of the AMD graphics card, execute the “Disable” command.

We reboot and use the device in the same way.

Owners of Intel chipsets are also familiar with a similar problem, which is caused by new drivers for the device. If their update does not help, we roll back to an older but stable version through the same device manager.

We call the properties of the driver, which is located in system devices.

See also: Programs for setting up Windows 10

In the “Driver” tab, click “Roll Back”.

If the button is not active, download the archived version of the software for the chipset from the Intel website and install it manually or through the “Update drivers” item in the chipset context menu in the device manager. Drivers of other devices may be the culprits for the long download of the “dozens”. If you encounter this, be sure to share the information with users in the comments.

(Visited 3,584 times, 13 visits today)

windowsprofi.ru

Windows 10 computer takes a long time to shut down - what to do if the shutdown time is longer than expected?

If you have been using the operating system for a long time or have recently updated to the latest version of the OS, you can observe a situation in which your Windows 10 computer turns off for a long time when using the “Shut down” menu option. There can be many reasons for this: from the PC being clogged with numerous debris and viruses entering the environment to problems with drivers and the presence of an excessive number of installed programs. You can resolve the difficulties that have arisen only by thoroughly learning about the reasons for their occurrence, and having dealt with this, you can try to cope with this problem. In addition, it is worth noting that, as a rule, the speed of computer shutdown directly depends on the hardware configuration of your PC, i.e. The faster your hardware, the sooner the computer will turn off when the system shuts down. But it is not always the case. In particular, if you have recently upgraded your electronic assistant, and the shutdown time is more than 30 seconds, the reasons should be looked for in the settings and parameters of the operating system, and not in hardware features.

The main reason why a Windows 10 computer takes a long time to shut down

The main criterion on which the PC shutdown time depends is the overload of the environment with various services and processes. As soon as you click the “Shutdown” button, the Windows OS immediately begins to sequentially disable all active processes running in the operating system. If one of the routines does not respond for a long time, the environment waits a certain amount of time before forcefully ending the routine. In each version of the system, this time varies: in Windows XP it is 20 seconds, in Seven – 12 seconds, in “eight” and “ten” - 5 seconds. To change this parameter, open the registry editor. To do this, right-click on the start menu, select the “Run” option from the drop-down menu, and enter the “regedit” key parameter. The form we need will open.

Now in the left panel of the snap-in, open the branch “HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control”. On the right, among a number of other parameters, we will find the value of WaitToKillServiceTimeout and set its value to 2000 or 3000, which will correspond to 2 thousand or 3 thousand milliseconds.

The changes made will take effect only after rebooting the PC, so we reboot and check the results of our work.

Other reasons why your Windows 10 computer takes a long time to shut down:

1. There are too many applications installed on the system. To speed up your PC's shutdown time, scan your PC for programs you don't need (i.e., those you don't use) and remove them from the Application Manager. Since each of the utilities used loads its modules into RAM when the PC is turned on, disabling and blocking them will take much more time than under circumstances where they are completely removed from Windows.

2. The system is littered. If you have been using an operating system for a long time, then it is likely that there are many file objects stored on your hard drive that do not perform any tasks, i.e. simply unnecessary. You can clean your PC using one of the appropriate applications (for example, CCleaner).

3. Damage to system files. Another fairly common reason is damage to system objects due to penetration of malicious code onto the PC. You can restore the integrity of these files using the instructions published not so long ago on our IT blog. It may take a little time to complete, but the game is worth the candle.

4. Finally, another reason why a Windows 10 computer takes a long time to shut down is the long time it takes to clear virtual memory when you turn off the PC. Let's cancel this routine by contacting the Group Policy Editor. To do this, start the search process on the PC by clicking on the magnifying glass icon in the system and enter the value gpedit.msc in the search field - this result will be the only one that appears in the corresponding search results field. Let's click on it.

After that, in the hierarchical folder tree, open the section Computer Configuration -> Windows Configuration -> Security Settings -> Local Policies -> Security Settings. The presented catalog contains a number of settings available for modification.

Find in the specified directory the parameter “Shut down: clear the virtual memory file”. Let's double-click on it.

On the tab that opens, set the value of the radio button to “Disabled” and click OK.

In order for the changes made to take effect, you need to restart the PC, after which we can check the results of our manipulations.

5. The last reason why the computer takes a long time to shut down is because the fast startup mode is turned on. For some reasons, when the PC is turned off, this service loads libraries from the system memory that do not work very stably, as a result of which the computer actually has problems with fast shutdown. This procedure is especially useful when the laptop is turned off for a long time, because it has separate power settings when operating on battery power and on mains power. Let's disable this mode in the system parameters.

Let’s go to the control panel by right-clicking the mouse on Start and open the “System and Security” section.

After entering this section, uncheck the “Enable fast launch” option and click the “Save changes” button.

Now everything is ready, you can try to test your computer for a quick shutdown.

So we talked about the reasons why a Windows 10 computer takes a long time to turn off. We hope that you will solve this problem, and our detailed instructions will help you with this.

LiveLenta.com

ElektroMaster.org DIY repair and maintenance of household electrical appliancesTips, guides...

Yandex.Direct

After installing updates in Windows 8 and then rebooting, the following problem arose, a message appears - Preparing to configure Windows. Do not turn off the computer; the process indication can reach 100% and remain in this state indefinitely.

And so, my way of solving the problem.

You need to perform an emergency shutdown. The meaning of the method is as follows - if any problem is detected, Windows 8 launches the Windows Recovery Environment during the next boot. The problem in our case will be an emergency shutdown (press the power button until the computer turns off, then turn on the PC). When you try to start the operating system again (after pressing the computer's power on or reboot button, during or after the system boots), you will receive the following message:

Go to “Advanced recovery options”.

I would also like to add that the recovery tool may not start the first time (after a forced shutdown via the power button). In this case, the “on-off” action must be repeated until we achieve the desired result.

This method helped me, and I wish the same for you.

After updating your Windows 8 or Windows 10 operating system, you may receive the message “Preparing Windows. Don't turn off your computer." Everything would be fine, but the screen with this message can literally hang tightly, which turns your computer into a useless piece of furniture.

However, when such a situation arises, there is definitely no need to worry, since it is quite possible to get out of it. Let's look at a few ways to resolve the "Preparing Windows" message. Don't turn off your computer."

Method number 1 Waiting

Yes, it may sound quite strange, but sometimes the message “Preparing Windows. Do not turn off the computer” can hang on the user’s screen for quite a long time: about half an hour or even an hour. Of course, the decision is controversial, but try to wait a while. Your computer may actually be preparing Windows.

Method No. 2 Turning off the computer

The next method is also quite simple - restart the computer. In such cases, it is always not recommended to do so in this way, since during the process of preparing the system, many system files can be damaged, but, in fact, you have no other choice. Press and hold the power button (not the emergency reset button!) for a few seconds to turn off the PC. Then press the power button to turn on the PC. If you're lucky, your system will continue its setup and won't crash.

Method No. 3 Restoring system files

This method should be used if rebooting did not help and your computer remains stuck in the process of preparing the system. Now we will try to restore system files, since it is their damage that can cause the eternal message “Preparing Windows. Don't turn off your computer." You will need to enter Windows Recovery Environment. Sometimes, the system itself will take you there after restarting the PC, however, most likely you will have to use the Windows installation disk.

After booting from the installation disk, select the desired language, currency, etc. etc., and then click on the “System Restore” button. Then follow the following path: Troubleshooting→Advanced Options→Command Prompt. As soon as the Command Prompt window opens in front of you, run the command sfc /scannow.

The process of scanning and restoring system files may take some time, so you will have to wait a little. After the SFC utility completes, restart your computer and see the result. Perhaps you will log into the system, or perhaps the preparation of the system for operation will be successfully completed. Or maybe nothing will change, but in that case...

Method No. 4 Returning the PC to its original state

Use this method as a last resort solution. Go back to the Windows Recovery Environment, which we touched on in the previous paragraph of the article. However, this time you will have to take a slightly different route: Troubleshooting→Reset your computer→Keep my files. Such an operation will most likely return your computer to working condition. Of course, due to the reset of the operating system settings and uninstalled applications, but the message “Preparing Windows. Do not turn off the computer” will certainly disappear this time.