Bypassing the “No access to target folder” protection. Bypassing the “No access to target folder” protection Windows cannot find the target object

It happens that Windows 10 denies users access to files and folders stored on the computer. Basically, this problem is due to the fact that users do not have the appropriate rights, even though they have an account with administrator rights. This usually happens in the case of system files/folders, or those that previously belonged to a user whose account no longer exists. What to do if access to a file or folder is denied in Windows 10? If this problem also torments you, this instruction should help you, which describes how to get full access to files or folders in Windows 10.

Get full access to a file or folder in Windows 10 through Explorer

Open Conductor and find the file or folder you need. If the file or folder is not visible in Explorer, do not forget.
Right-click on the file or folder and click on Properties.
Go to Safety and click on the button Additionally.
In the window Additional security options click on the link Change.
Press Additionally - Search.
From the list of users and groups, select your preferred owner and click OK.
Check the box next to Replace owner of subcontainers and objects, and click on OK.
Right-click the file or folder again and open Properties – Safety.
Press Additionally – Add.
Click on the link Select Subject.
Press Additionally – Search, select a subject from the list and click OK.
Under the inscription General permissions check the box next to the item Full access and click on OK.
Check the box next to the item Replace all permission entries of a child object with those inherited from this object.
Press OK to apply all changes.

Take Ownership of a File or Folder in Windows 10 Using the TakeOwnershipEx Utility

As an alternative, you can use the TakeOwnershipEx utility. It allows you to change the owner of a file or folder and gain full access to it in a few simple clicks. Users just need to do the following:

Did you find this instruction helpful? Did it help you in solving the problem of gaining access to files and folders in Windows 10? Write your answer in the comments.

Surely, many Windows 7 users have encountered the problem that sometimes when performing some actions with files and folders, the system not only asks for confirmation at the level of administrator rights, but also displays a message stating that there is no access to the target Windows 7 folder. How to correct this situation will now be considered. But first, a little theory.

Can't access Windows 7 target folder. Why?

The thing is that the developers of the seventh version of the system, as well as all subsequent modifications, tried to protect it from accidental interference by inexperienced users by creating a super administrator account, on whose behalf all permissions for carrying out system-critical operations are carried out.

This is why sometimes a message may appear stating that the user does not have access to the target Windows 7 folder when copying, moving, deleting or trying to change some important system components. For many, such constant restrictions, frankly speaking, are seriously annoying. However, you can bypass them, and quite simply. But more on that a little later.

Problems copying or moving files

Typically, if the user's actions are not related to system components, but, for example, to installing programs, copying and moving certain objects, a request to confirm the action is usually simply issued.

You just need to agree and the process will be completed without problems. The situation looks much worse when attempts are made to access or perform some actions with system files and folders. This is where a notification appears that the user does not have access to the target Windows 7 folder. In the simplest case, this is an attempt to copy some object to or from the system partition. To correct the situation, it is logical to assume two solutions: disable the superadmin “account” and grant yourself absolutely all access rights or change system components.

No access to target folder Windows 7: what to do?

For the first case, the method looks quite simple, but first you will still have to use administrator rights.

They are needed to launch the command console, which is called via cmd in the “Run” menu. Here you need to write one single line: net user Administrator / active: yes (if the action is performed in the English version of Windows, instead of the Russian word you should use its corresponding analogue - Administrator), and then press the Enter key.

The second method will take a little more time, but it fully guarantees that the message that the user, even if he is an administrator at least three times, does not have access to the target Windows 7 folder will not appear again. True, this applies exclusively to single selected objects with which some actions are supposed to be performed.

Here you need to use the context menu, called by right-clicking on a directory or file, in which you first select the properties line, and then use the security tab, where you need to select the group or user for whom you want to set extended privileges. At the bottom there is a button for additional settings, after clicking on it a new window appears.

In it you need to use the permissions tab (it’s the first one), in the type column, look at all the lines in which the ban is set, and then click the button to change permissions. In the new window we find a similar line and press the button again, as in the previous case. After that, we simply change the permission type by checking the box next to the full access line.

If you return to the first menu, you will see that all types of operations are automatically checked in the permissions column.

Now, when working with the selected object, a message stating that the user does not have access to the target Windows 7 folder will no longer appear. But keep in mind that this only applies to the selected object. If permissions are required for another directory, the above operations will have to be performed again. By the way, this method also works if access to removable devices is denied, only in this case you need to use the properties menu of the device itself.

Problems with access on local networks

But that's not all. Problems can also arise with local networks. Sometimes the system also reports that a user (or group of users) does not have access to the target folder; it may simply have such settings when some restrictions are set not only on shared access to directories on network terminals, but also on their detection on the network.

First you need to check the additional network settings and set enable options there for all parameters except password access. This establishes visibility of computers on the network and everything that is on them.

Next, you should select a specific folder and simply share it through the corresponding line in the right-click menu. In addition, in the settings you can specify a group of users or specifically selected users for whom these parameters will be applied.

Instead of a total

As you can see, you can get rid of the constantly popping up message in different situations quite simply. Which method should I use? It all depends on the specific case. However, the first two methods for home terminal users work flawlessly. For enterprise networks, you may need to contact your system administrator to apply some settings. In particular, this applies to setting network parameters. But the user can enable shared access to a separate directory himself (administrator permission is not required for this).

Sometimes, when opening data, the user receives a warning that they cannot be accessed or that permission must be sought from the owner. In this case, it will be possible to access the information after obtaining rights. Several ways to do this will be described in this article. But to use them, the user account must have administrator rights. However, you should not immediately change the owner of the entire HDD on which the system is installed, this may lead to failures.

Using the takeown command

The first option for obtaining rights involves using the console. To get started, you need to launch the console with administrator rights, this is done through Start. After launch you will need to enter the command takeown /F “path indication” /R /D Y.

Examples of command execution are shown in the image. The user will then be able to access the information.

Changing the owner using the icacls command

The second method also involves entering a command through the console. It’s worth turning it on and entering Icacls “Data reference” /setowner “User” /T /C. Paths are written exactly according to the same principle as in the previous section. Instead of user, you need to substitute the name of the account that will have access to the data.

An example of operator input and execution can be seen in the image.

Using Security Settings

The next method has nothing to do with using the console and entering commands; it uses only standard system tools. To get started you need find a file or folder that you want to access. After this you will need to right-click on it and select “ Properties", go to the security section, and then select the item Additionally.

In the window that opens, find the owner and click next to him on the link “ Change" After which another window will open, in which you will again have to go to additional parameters and perform a search in them.

As a result, a list of accounts on the device will be displayed. It is worth choosing the one that will receive the necessary rights. After which it is necessary click OK.

If the user changes the owner of a folder or local drive, he must check the box marked in the image and then apply the changes.

Other ways to obtain owner rights

You can download one of the free utilities that will allow you to access data from the context menu. For example, TakeOwnershipPro, a free utility that will help you gain access. All you have to do is right-click on the data and select the desired item.

However, such actions are not required very often, so the user should consider whether it is necessary to clutter the system with another program that will constantly run in the background.

The Windows operating system (7, 8 or 10) writes to perform this operation, and does not allow you to perform the necessary operations. How to resolve the situation and gain access?

Why is this happening?

Many will logically assume that this is caused by Windows security policy and they will be right. The operating system blocks access so that inexperienced users do not cause harm or affect the stability of operation, as well as to prevent automatic actions of malicious software. The opposite is true for third-party antiviruses, which can block folders if malware is detected in them.

It is noteworthy that a user with an account below Administrator cannot remove the installed software, and the account obtained during installation of the operating system, although it belongs to the Administrator class, is not such.

Important directories of the system are protected, and they cannot be changed unless the necessary permissions are obtained. Another cause of the problem is the “Owner”, who is also the creator of the folder. This happens when the PC username changed when reinstalling Windows.

Bypassing the “No access to target folder” protection

Despite the apparent complexity of the manipulations, most of them are simply simple and can be completed in a few minutes. We solve the problem in the following ways:

Third-party software (and operating systems).
Granting permissions through properties.
Enabling the Superadmin account.

We work with the operating system

First of all. You can try deleting/replacing files in the directory in “Safe Mode”. It starts when you turn on the computer by pressing the F8 key and is standard for tens and sevens. It didn’t help – we move on.

Denial of access occurs for other reasons. Recommended actions:

Disable processes using a file or folder in the Task Manager.
Deactivate the antivirus and disable it in the Autorun menu (msconfig command in the command line running as Administrator). In some cases, complete removal is recommended for follow-up.
Setting unlocking handles – Unlocker or Unlocker Assistance or analogues.
Disable UAC. Here is a visual instruction using the example of disabling it in Windows 7.

BikaQ RSS Reader what is this program

There is no desire to change directory permissions and gain Administrator access - try Total Commander. The application does a good job of bypassing various blocks. Just open this program and through its explorer perform the necessary operation with the folder.

Now let’s look at more global actions that are not recommended for inexperienced users. As a last resort, the changes can be rolled back.

Obtaining Administrator rights

As already mentioned, the Administrators group account is not really like that. To use Superadmin privileges, you need to do the following.

Open the console as Administrator.
Register the command net user Administrator /active:yes. For the English version of Windows, replace Administrator with Administrator.
Reboot by selecting the Administrator account.
Make changes in the desired directory.

After this, you need to decide whether to remain on the Administrator account or return to your own. If you decide to return everything as it was, launch the console as Administrator and enter the command net user Administrator /active:no, or according to the previously described analogy with the English version. This command affects the display and hiding of accounts. In fact, we only enable the display of the SuperAdmin account we need.

Setting a password for the Administrator account.

We decided to remain in the system as an Administrator with minimal rights restrictions - take care of the security of your PC, set at least a password. Don’t forget that malicious software is easier to install on computers where they work under the SuperAdmin account with UAC disabled.

For experienced users – Live CD

Experienced users have had a flash drive with the image ready for a long time. Some people store Windows on it, while others store Linux and other operating systems. The optimal solution in our situation would be to have LiveSD with Linux of any version. He's less picky.

The essence of the action is simple:

Switch the priority of loading to a USB flash drive when booting a computer or laptop.
Wait to enter the operating system.
Make changes.
Reboot, returning priority to the hard drive.

By the way, read this article too: How to make a presentation on a computer

Opening access

There are 2 ways to achieve what you want: the first is simpler and more superficial, and the second is deeper and more complex.

Method No. 1: we issue permits

If permissions are not issued after saving, reboot your computer.

Method No. 2: change of owner:

Select your account and add it.

In the same way we get to the tab "Safety", but select the button below "Additionally".

Opposite the line "Owner" click "Change".
In the box below - "Additionally". Through "Search" select your account, administrators (for SuperAdmin) or All.
We save all changes with the added owner.

Likewise, adjustments sometimes take effect after a reboot. After completing the change of ownership, you may have to go through the permitting process again. Important! If the operating system does not allow you to save changes, then try another UAC mode: if it was turned off - turn it on, if it was turned on - turn it off.

Conclusion

The “Destination folder cannot be accessed” blocking alert in Windows is a common and easily solved problem. It is not difficult to solve, and the actions will take a little time, eliminating the problem. Of course, start with the simplest steps - such as checking the Manager for unnecessary processes, or disabling the antivirus.

Users of each version of Windows often encounter a variety of problems specific to a particular release of the operating system. With the release of the tenth version, the list of annoying problems was supplemented with rather strict restrictions regarding operations with various files and folders. In an effort to make the system more stable and protect it from random destructive operations on the part of the user, OS developers have revoked access rights to some folders in all categories.

The essence of the problem

When copying files or folders, you may often see a message: There is no access to the target folder in Windows 10, which confuses most users. After all, it would seem that they are working from an account that even has full administrator rights, but for some reason they are denied access to certain directories and files. To understand this problem, you need to perform a number of fairly simple operations.

IMPORTANT! Some folders associated with the operation of the Windows system have strict restrictions on the operations performed, which cannot be circumvented using a regular administrator account.

To obtain the necessary rights, you will need to adjust access to a directory or file manually in each specific case.

Debugg

It is quite possible to eliminate this problem using the built-in tools provided in the operating system. However, for greater convenience, you can resort to specialized utilities that return all folders and files to the user’s full disposal.

ADVICE! Nevertheless, adjusting rights using system tools seems to be the most appropriate option, since it allows you to avoid installing unnecessary applications.

To gain full access to the folder, you will need:

Right-click on it and go to Properties;
In the Security tab, you will need to click the Advanced button;
In the menu that opens, you will need to select Change, and then click Advanced again in a new window;
A menu will appear containing . Having selected the current one, click Apply and Ok in all open menus, which will allow you to apply the changes.

Thanks to a similar algorithm of actions, you can change access rights to any folder or file. It is extremely important to be careful, as it is not recommended to change any files and folders protected by this method.