Red screen on iPhone. What to do? Why does the iPhone light up with a red screen and the Iphone 5s does not turn on when the red screen is turned on?

First, let's make it clear, if your iPhone fell out of a window from the 100500th floor, or you swam with it in the sea, this article will not help. You will have to go to a service center or to the nearest landfill. Today we will find out how not to panic and what to do if the iPhone 5s does not turn on, the apple light is on or the red screen is on.

The more modern and functional smartphones become, the more risks arise in terms of hardware and software. Processors have to “shove through mountains” of information; in the process, overheating of the microcircuits can occur and, as a result, errors. Errors in software can lead to sad consequences, such as a sudden red screen on your iPhone (red screen of death), and a variation of the same problem, a blue screen on the iPhone 5s (BSOD).

There is no point in panicking and running in circles around the gadget, shouting “everything is lost”, there is always a way out, remember this.

Causes

There are many reasons why an apple appears on the screen and the device does not turn on. Users complained that at first the iPhone gets very hot, and then there is a blue screen and that’s it. Silence. The phone retreated into itself and did not respond to button presses. We’ll look at how to avoid this in the next section, but now let’s look at the causes of such breakdowns:

Software errors (iOs)

Software, in particular Jailbreak, is essentially file system hacking. you can judge the consequences for yourself
Installing crooked applications from the App Store. Yes, yes, and this happens, even if you are not a fan of jailbreaking.
The critical iOS update is not installed (remember the last time you updated)
There is a version - a red screen on an iPhone may occur due to a touch ID failure after several unsuccessful scanning attempts. But this is more of a rumor.

Problems with hardware (chips)

Dropping an iPhone 5s on a hard surface does not improve its health. If immediately after a hard landing the iPhone does not turn on or a red screen appears and that’s it, then you need to inspect the internal connectors. Perhaps one of the plugs has fallen out of the groove.
Drowning an iPhone 6 in normal or sea water also results in a blue or red display (BSOD).
Installation of low-quality spare parts on the phone during a previous repair. The market is flooded with fake spare parts for iPhone 5s, 6, 7. You should be careful when choosing repair shops.
The use of cheap Chinese chargers that can sometimes deliver such currents that even a refrigerator will burn out, not to mention the delicate electronic interior of the iPhone 5.

Symptoms

With this problem, you can encounter symptoms that seem to be incompatible with each other, for example, when the phone gets hot and displays a blue screen on the 5s. It would seem that heating and system error have something to do with it. The answer is simple, most likely there was a processor error that was fixated on solving a meaningless task.

In addition, there is a whole range of symptoms:

When turned on, a red screen appears.

When turned on, a blue screen appears.

The phone heats up while charging and shows no signs of life; after a minute a blue (BSOD) or red screen (red screen of death) appears.

When I try to turn on the device, the message “iphone requires cooling before using” appears. In this situation there are two options:

The iPhone simply overheated in the sun, which means it needs to be cooled in the shade. Or put it in the freezer for 15 minutes, wrapped in a cloth.
If 5 does not turn on and the case is cold, but it says “cooling is required before using the iPhone,” we try to turn it on again, BSOD mode may appear.

You shouldn’t be afraid of this behavior of the device; you need to carry out the procedures described in the next chapter, in 80% of cases, this saves the device from glitches, and you from wasted time and money in the service center.

Solution

It's time to answer the question of what to do if the iPhone 5 does not want to work as it should, it throws screens of death, becomes hot as an iron and does not turn on.

We try to do a “Hard Reboot” of the phone. To do this, press the Power and Home buttons for 10 seconds. The iPhone 5s will then reboot; the procedure can be repeated several times until iOS is fully loaded.
After successfully loading the iPhone operating system, turn it off for 10-15 minutes.
If iOS loads, urgently disable synchronization of applications with iCloud.
The next step is to temporarily disable the Find My iPhone feature. Go to “Settings” - “iCloud” - “Find iPhone” and turn off “Find iPhone”.
Now on iPhone 5s, 6, 6 plus, 7, 7 plus we will disable touch ID authorization. Go to “Settings” - “General” - “Passcode & Fingerprints” - “Fingerprints”, turn off this function. Now the request for touch ID when turned on will not give an error on 5s, causing a red screen to appear.
Install the iOS update suggested by the system.
We're taking it back to the workshop, the monitor cable may have broken or the connector has become loose.

To me, the red screen in iPhone 5s, iPhone 5, iPhone 5s, iPhone 7... reminds me of the communist regime that killed millions of innocent people, but I hope that your smartphone will bypass this prospect.

Usually the red screen lights up when turned on and, judging by experience, this most often happens with the iPhone 5s - less often in the iPhone 5 and iPhone 6.

If the screen turns red and the phone does not turn on, the first thing we recommend doing is force a restart.

To do this, press the Home + Sleep/Wake buttons at the same time and hold for ten to fifteen seconds.

Only this operation solves the problem for a short time, which means that the “red screen” may recur. What to do? Let's look below.

NOTE: There is also a great app that will check your iPhone screen and, if any errors are found, provide instructions on how to fix them - I already have one

Potential Causes of a Red Screen on iPhone

Most likely, there is an aceatsa software error caused by a corrupted backup archive. You can try to restore the process (recovery) using iTunes aceatsa to solve the problem.

The second reason: a hardware error in one or more iPhone components. In this case, you need to contact Apple service.

I've been using iPhone since the first generation. IPhone X is my seventh Apple phone. Through all these generations, I have sometimes had to deal with defects.

My drama with the appearance of the red screen took place unexpectedly on Sunday. I used my new phone quite intensively that day.

Late in the evening I had a fairly long two-hour conversation, after which the battery died.

I plugged my phone into the charger and moved on to other things. 15-20 minutes passed when I realized that something was wrong.

The apple was still burning on the screen, and after 2-3 seconds I saw the “red screen of death” for the first time.

The first thing I did was reset the phone, but the red screen appeared again, after which it rebooted again and this cycle repeated.

Attempts to restore the software in recovery mode and even in DFU did not help.

However, it was impossible to completely restore the software. Each time, this process was interrupted by a red screen followed by a reset.

The problem appears to have started after upgrading to a more recent iOS. I fixed this by installing the penultimate version, but your reason may be completely different. One of the solutions is a program that corrects errors in iOS.

Program to fix red screen on iPhone

The program is called ReiBoot. Although of course there is no 100 percent guarantee that it will fix everything, I recommend trying it

For downloading The program has been tested and it will not delete any of your files - you can be sure.

To use it you will need a laptop/computer and a connecting cable (from the charger).

If the red screen appears after a fall or impact, then of course you should not install the program.

iPhone red screen of death and error 4013

error 4013 may mean a malfunction of the Wi-Fi module, accelerometer, battery connector, problems with sensors....

Also, error 4013 may be due to the use of a Chinese cable when updating via iTunes.

Apple employees have reduced the update time to a minimum, so that Chinese substitutes do not have time to transmit the signal.

The last option is flashing. You can do it yourself. There is nothing complicated. Good luck.

At one point my iPhone 6 decided to reboot and never turned on again. Instead, it kept trying to boot, only to get a red screen of death. They write on the Internet that this problem can be solved by ordinary restoration. Some of you will not be able to cure your smartphone, in this case I advise you to take it to a service center, and they will either replace or repair your device under warranty.

Step 1: Connect iPhone

Open iTunes and connect your iPhone using a USB cable.

Step 2: Reset settings

To reset your iPhone, press and hold the two Sleep/Wake and Home buttons simultaneously until you see the Apple logo - DO NOT RELEASE THE BUTTONS.

Step 3: Enter DFU (recovery) mode

Hold down the Sleep/Wake and Home buttons until the Apple logo disappears. After 3 seconds, release ONLY the Sleep/Wake button (the one on the side) and continue to hold the Home button (the round one) until you see iTunes issue a notification.

Step 4: Restore iPhone

Follow the instructions that appear on the screen. As a result, you will have to click the “Restore” button.

Step 5: Final Recovery

So, now you can either set up your iPhone as new or restore it from a backup button.

ATTENTION! If you followed all the steps in this article and still did not fix the problem, then take your device to service.

Therefore, tomorrow I will go to the service center to find out what the problem is. Stay tuned!

UPD 1: I handed over my smartphone to the “Your Mobile Service” service. They said they would either fix it or replace it within a week and a half.

UPD 2: I received an SMS from the service:

Your IPhone 6 device according to application 10746 dated 11/10/14 is ready to be returned from repair.

I called and you can actually pick up the phone. I came to the service center, and they brought me a brand new iPhone 6. In general, they replaced my smartphone, and the next day after I contacted the service center.

Why does the red screen on iPhone 6 light up when I turn it on? What is this connected with? What to do when you constantly Red screen on iPhone 6? DIY instructions and repairs Will they help correct the situation or is there no way to do without the help of experienced service center specialists?

Instructions: In the problem under consideration, there are several types of breakdowns and, logically, different variations of their elimination.

If you previously flashed the firmware of the communicator being analyzed, then, most likely, this is what caused its malfunction. It is necessary to eliminate software defects, and for this we recommend making a new licensed firmware;
Presumably the processor has failed. To confirm this version, you will have to do computer diagnostics. If the processor is still faulty, then it can actually be repaired, but this is a rather complicated type of work;
If the iPhone 6 gadget was dropped or got wet before glitches appeared, it means that the device’s board has suffered from mechanical damage or corrosion. We carry out restoration only after receiving the results of the initial inspection.

Result: The first option can be eliminated at home yourself, but if the 2nd or 3rd option is discovered, they can only be eliminated by professionals at the Telemama service center.

You are offered 2 options to solve the problem. Choose which one is more convenient.

Repair at the Apple Telemama service center

DIY repair

Our advantages

We select only original, impeccable quality spare parts for installation.
Price. We order the necessary components from the manufacturer in large quantities, and then we will offer them to you at a reduced price.
Repair time. On average, it takes about 20 minutes to install a display, connector, speaker, etc. If a more serious fault is found, then we will spend another 20 minutes examining the device.
1 year warranty.

If your communicator is broken and you don’t know how to fix it yourself, then contact the employees of our service center - they will come to the rescue. To make it more convenient for you, we have organized a courier delivery service for equipment. But, if you wish, you can personally deliver gadgets to the SC.

In our unique service, computer diagnostics are carried out absolutely free. We will agree on the cost of services with you and begin to implement them. Installation of original replacement components is done by experienced professional craftsmen. The quality and effectiveness of their work is confirmed by a long-term guarantee.

After we fix the iPhone 6, you can pick it up from the service yourself or entrust it to our courier. A one-year warranty will be issued in each option. After that, you and your friends will have your equipment repaired with us at a discount. To receive a discount, please provide your order number.

Our Telemama service center has been repairing and selling components for equipment for a long time. We also offer advice from specialists on how to independently repair these communicators if, when turned on, the screen starts to glow red, or other problems arise.

The price in the price list is written down in detail and clearly.

Regular customers do not need additional discounts, because minimum prices are offered to them every day.

Under the terms of promotions that are regularly held, you can repair your communication device at cost and with a 1-year warranty.

Many owners of iPhone 5S gadgets have repeatedly encountered various malfunctions, one of which is a red screen. This problem occurs for various reasons. And therefore, before making a decision, it is worth familiarizing yourself with them.

Reasons for the red screen on iPhone

The red screen on the iPhone 5S is similar to the Windows blue screen of death. It indicates that a critical error has occurred on the device.

If in Windows the causes of the blue screen of death can be both software and physical, then on the iPhone the red screen of death can be caused by the following factors:

Device dropped;
Damage to the device and its internal components (shocks);
Oxidation of device parts caused by contact with water;
Using a non-original charger;
Damage to the Wi-Fi module;
Disconnecting the USB cable from the device during system recovery;
Installation of an unlicensed PC, heavy load on the processor, which caused the processor to overheat.

Also, a red screen of death may occur after an unsuccessful update of the operating system or pre-installed software.

Ways to solve the problem - red screen on iPhone

Since the red screen of death on the iPhone 5s can occur for various reasons, the solutions to the problem will vary.

If you dropped your gadget on a hard surface or it was subject to shock, then most likely the cable is damaged. This problem can only be corrected by replacing this cable. This can only be done at a service center. You should not take any action on your own to repair a smart gadget. You will automatically lose the warranty and repairing the device will cost you the price of a new gadget.

If the device stops charging and you connect it to the network via a bad cable, a red screen may appear. In this case, the gadget will have to be emergency rebooted and purchase an original cable for charging. The thing is that third-party chargers do not provide the required voltage, and the “smart Apple device” is very sensitive to voltage changes.

If you installed a program or game without a license, or updated pre-installed software, then you can solve the error with the red screen of death on iPhone 5 by restoring the system via iTunes and PC. To do this you will need to do the following:

Go to the official Apple website and install the latest version of iTunes.

We connect the device to the PC using only the original USB cable.
Press and hold the Lock and Home buttons.
The Apple icon should appear and disappear. You need to release the lock button (but not the “Home” button, hold it).
The iTunes window will appear. Now release the Home button.
Follow the program's prompts to restore the system.

After restoring the system, the gadget should start without the red screen of death.