How to make highlighted words in capital letters. Keyboard shortcut to make large letters small. How to capitalize all letters in excel

The need to make large letters small in a Microsoft Word document most often arises in cases where the user forgot about the CapsLock function being turned on and wrote some part of the text that way. It is also quite possible that you just need to remove capital letters in Word so that all text is written only in lowercase. In both cases, capital letters are a problem (task) that needs to be solved.

Obviously, if you already have a large piece of text in capital letters or just a lot of capital letters that you don't need, you are unlikely to want to delete all the text and type it again or change capital letters to lowercase letters one by one. There are two methods for solving this simple problem, each of which we will discuss in detail below.

1. Select a piece of text written in capital letters.

2. Click “Shift+F3”.

3. All capital (capital) letters will become lowercase (small).

Advice: If you want the first letter of the first word in a sentence to be capitalized, click “Shift+F3” again.

Note: If you typed text with the CapsLock key active, pressing Shift on those words that should have been capitalized, they, on the contrary, were written in small letters. Single click “Shift+F3” in this case, on the contrary, it will make them larger.

Using built-in MS Word tools

In Word, you can make capital letters lowercase using the tool "Register" located in the group "Font"(tab "Home").

1. Select a piece of text or all the text whose case settings you want to change.

2. Click the button "Register" located on the control panel (its icon is the letters "Ah").

3. In the menu that opens, select the required text writing format.

4. The case will change according to the writing format you have chosen.

That's all, in this article we told you how to make capital letters small in Word. Now you know a little more about the capabilities of this program. We wish you success in your further development.

Replacing capital letters with capital letters. No matter how good the old text editor is (I mean Word 2003), it simply does not have many useful functions. It's sad, but there's nothing you can do about it. There is only one conclusion - you need to switch to a newer version. And for that matter, it’s better to be as new as possible. Get used to it, so you can immediately get good. Today I want to tell you about another useful function - replacing capital letters with capital letters. It often happens that by inertia you type the text in small letters, and then you remember that it should be a heading, and it is desirable that all the letters in it be capitalized. You erase it and write again. But it turns out that the text could not be erased.

• Select the written text;
• Go to the toolbar and on the tab home click the button Register ;

• Select an entry from the drop-down list - ALL CAPITAL ;

In the same way, you can change capital letters to lowercase or give a command to change the first letter in a word to capital, or vice versa.

1. Function As in sentences – changes the first letter to capital (capital);
2. All lower case – changes a capital letter to a lowercase (small) one;
3. ALL CAPITAL – changes all letters to capital letters;
4. Start with Capitals – all words in a sentence begin with capital letters;
5. CHANGE CASE – all first letters in words will begin with lowercase (small) letters. True, I don’t know why this is needed.

I hope you find these features useful.

Modern computers have become indispensable assistants for us in almost any activity. With the help of them we can spend our leisure time, make purchases, and most importantly, do work with documents.

Indispensable assistants in working with text

Depending on the type of activity, you can choose a specific software package. If you use Windows, Office applications immediately come to mind: Word, Excel, PowerPoint and others. It doesn't take a genius to master the basics of using these little programs. The developers tried to arrange all the tools as rationally and structuredly as possible.

For example, Word is one of the most popular. It is most often used for office work, but it is also perfect for home use. The good thing about the editor is that it is suitable for both professional work and for drafting the simplest documents. It is used everywhere by schoolchildren, students, journalists, copywriters, and bloggers. Thanks to its simplicity and intuitive interface, the editor is even used for quick sketches at home, for example, making a shopping list or writing down recipes.

At the same time, the capabilities of Word allow you to create complex graphics and diagrams, edit images and font styles, and much more. Today we will take a closer look at this editor and learn about small tricks in using it, for example, how to do everything in Word.

MS Word

The first version of Word was created back in 1983 by Richard Brody. Since then, more than one update has been released for this small program. The editor uses simple forms of the table-matrix algorithm. Today the program is one of the most practical and used in the world. And this is far from an accident.

Advantages of Word

Word integrates perfectly with other formats. So, version 2007 allows you to save the file in PDF format. The editor facilitates fairly fast and pleasant formatting of documents. The functionality is configured so that you can instantly change the document design style, insert a picture or media file.

MS Word provides a wide selection of SmartArt objects that are implemented in 3D format. Even a child can work with the editor, and if questions arise along the way, you can use the built-in assistant, which will explain step by step how to complete a particular task. You can also vary the file size and recover damaged documents. Automatic use of built-in formulas and hyperlinks, a table creation wizard, quick spell checking, print preview - all this and much more can be found in this text editor.

All these functions “lie on the surface,” but what happens if you “dig” deeper? For example, how to make capital letters Let's get acquainted with the little secrets of Word that will help make text editing much faster and easier.

How to make all letters capitalize in Word?

Many inexperienced users, having created text, do not know how to make certain adjustments to it. For example, how to make all letters capitalize in Word. So, they rewrite sentences again, wasting a lot of precious time. In order to solve this problem, there are several ways.

The first one is the CapsLook button on the keyboard. When you press it, you will immediately type in capital letters. This is very useful for designing headings or highlighting certain parts of text.

But it happens that you need to format the already entered text in the same way. How can I change letters to capital letters in Word if they are already typed? Not many people know that there are a number of hotkeys or their combinations for quickly performing a certain function in a text editor. Select the text you are going to change with your mouse. Then press Shift+F3. Ready! Now the letters have become capitalized. By the way, to select all the text, you can press Ctrl+A. There are other ways.

How to change letters to capital letters in Word using the mouse?

To do this, select the desired text, hover the mouse over it and press the right button. You will see a context menu, and in it - “Font”. A small additional text editor will open. You need to pay attention to the “Modification” item. In the third column, select "All caps", click "OK", and the letters will become capitalized.

The third way to make text in capital letters in Word is as follows. You should be in the "Home" tab. It is installed by default when opening a new document. Select the desired piece of text again. In the "Font" panel (where text is bolded, italicized, underlined, etc.) you will see a small icon with two letters "Aa" and a small down arrow. Click on it and select "ALL CAPITAL", this will change the letters immediately.

Now you know how to make text in capital letters in Word. But what about other little tricks?

In addition to such an interesting function as changing case, our text editor has a number of secrets. For example, using the combination Alt+7+6+9 you can add an accent. This is very convenient when writing literary text and legal documents. You can also put a password on the document to protect your personal information. This manipulation is available in the "File" menu. Using Ctrl+Z you can undo the last action. If you need to select a large piece of text (for example, more than one page), you can place the cursor at the beginning point and hold down the Shift button, then simply move to the end of the passage.

Now you know how to make all letters capitalize in Word. Create and edit text quickly and easily!

With Word and Publisher, you can print poster letters and resize them from 1 to 1638.
For beginners, the difficulty is that it is not clear how to make the letters larger if the standard sizes are limited to font size 72.
This article discusses the issue of increasing the standard font size, as well as the question of how to create a WordArt title.

How to print capital letters

1. Set the scale smaller because we need to see the sheets and the letters on them in order to edit the inscription.
1.1. In Word 2010, in the status bar we find the scale tool.
Use the slider or click the minus button to reduce the sheet size.

tool - scale

1.2. In Word 2003, the scale can be set in two ways - by selecting the desired one in the toolbar.

(Figure 2)

The second way is to click "View" / "Scale"

(Figure 3)

(Figure 4)
After we have chosen the scale, we can see several sheets at once and how the inscription will look.

2. Change the size of the letters.

If you don't know how to increase the letter size (more than 72pt), then it's quite simple.
We erase what is written in the “Font Size” window:
— place the cursor inside the “Font Size” window;
— delete the number indicating the old size using the backspace or delete key;
— print the new font size, remembering that the upper limit is the number 1938 and if you type 1939, the program will report an error.
2.1. In word 2010, go to the “Home” tab, erase the old font size and type 72, and then press Enter.

2.2. In word 3003 you also need to erase the font.

(Figure 6)

Here's what I got.

Working with WordArt

This feature is not available in Word 2010, but is present in Publisher, where the inscription can be printed and copied into Word.

3. To make WordArt text, turn on the drawing panel in Word 2003; to do this, click “View” / “Toolbar” / “Drawing”. Now click on the letter A in the WordArt panel and select a font for the ad text.

(Figure 8)

And now you can write the text in full or in parts...

4. After we have received part of the text, we need to move it, move it, but it won’t work that easily - we will have to change the settings of the WordArt object. To do this, select the text, right-click on the selected object and select “Format WordArt Object” in the window that appears.

5. Then in the window that appears, we must go to the “Position” tab and select “By contour”, now we can freely move and enlarge our object.

Go to the Position tab and select Along contour

(Figure 11)

Conclusion

If you are going to print an inscription for a poster in Word, then this can be done using regular text enlarged in size and WordArt text.
Moreover, the new program does not always have the best capabilities and the outdated word program can print in the same way, you just need to know the location of the tools.
Good luck with your poster.

For some time now, TheBat's built-in certificate database for SSL has stopped working correctly (it is not clear for what reason).

When checking the post, an error appears:

Unknown CA certificate
The server did not present a root certificate in the session and the corresponding root certificate was not found in the address book.
This connection cannot be secret. Please
contact your server administrator.

And you are offered a choice of answers - YES / NO. And so every time you remove mail.

Solution

In this case, you need to replace the S/MIME and TLS implementation standard with Microsoft CryptoAPI in the TheBat settings!

Since I needed to combine all the files into one, I first converted all the doc files into a single pdf file (using the Acrobat program), and then transferred it to fb2 through an online converter. You can also convert files individually. The formats can be absolutely any (source) - doc, jpg, and even a zip archive!

The name of the site corresponds to the essence :) Online Photoshop.

Update May 2015

I found another great site! Even more convenient and functional for creating a completely custom collage! This is the site http://www.fotor.com/ru/collage/. Enjoy it for your health. And I will use it myself.

In my life I came across the problem of repairing an electric stove. I’ve already done a lot of things, learned a lot, but somehow had little to do with tiles. It was necessary to replace the contacts on the regulators and burners. The question arose - how to determine the diameter of the burner on an electric stove?

The answer turned out to be simple. You don’t need to measure anything, you can easily determine by eye what size you need.

Smallest burner- this is 145 millimeters (14.5 centimeters)

Middle burner- this is 180 millimeters (18 centimeters).

And finally, the most large burner- this is 225 millimeters (22.5 centimeters).

It is enough to determine the size by eye and understand what diameter you need the burner. When I didn’t know this, I was worried about these dimensions, I didn’t know how to measure, which edge to navigate, etc. Now I'm wise :) I hope I helped you too!

In my life I faced such a problem. I think I'm not the only one.