How to use Revo Uninstaller. Revo Uninstaller Pro - removing programs from your computer

Not all unnecessary files from a computer can be deleted just like that: some are not completely deleted, others are scattered throughout the computer, others constantly accumulate as a result of the operation of the operating system, and most users have no idea about them. All these files slow down your computer and take up free space. The obvious solution to the problem is to remove them, which Revo Uninstaller does an excellent job of.

Features of the program

The classic removal of previously installed programs and files does not always lead to truly complete removal of the software. There are almost always a lot of extra files left.

These files can be used:

When reinstalling the software again.
To collect any information about the computer or user.
Files can simply be created and remain as a result of work, after which they take up free space for years without benefit to the owner.

For this reason, it is important to know how to use Revo Uninstaller Pro so that your computer does not turn into a slow-running garbage dump over time.

Revo Uninstaller can perform the following functions:

Complete removal of programs from the computer, including deleting files from user folders, various subsections and hard drive directories.
Configure programs to automatically start when you turn on the computer: turn on those you need, turn off or limit those that are required only from time to time.
Delete system files, temporary documents and other things that have already been used and will not be needed in the future by either you or the computer. Some of these files can be deleted without an uninstaller, but not all of them can be deleted only by restarting the computer, which is not always convenient and, in principle, possible.

How to use the program?

You can download the program on the official website and use it for 30 days. During this time, you can remove the annoying uninstallable program from your computer and thoroughly clean your computer of debris.

Go to the official website and download the trial version for free.

2. Install the program on your computer

3. Launch the program

Please note that the program will only run under an administrator account

Uninstaller

This section displays all programs installed on the computer. At the top of the window, those that were recently installed are displayed in a separate line - this way you can immediately clean your computer of unnecessary or accidentally installed ones.

Programs are removed by clicking the “Delete” button. However, the work does not end there, and after removal, Revo will offer to scan the system for files remaining from the software.

Scanning is carried out in one of three modes:

Moderate;
Safe;
Advanced

In order to remove all the garbage left by the program being removed, we will use the deepest scanning mode - “advanced”.

Some time after its launch, a window will be displayed in which all residual information about a specific program on the system will be displayed. These junk files are deleted in three steps: first, select absolutely all files, then click on the “delete” button, then click on the “next” button.

Attention! After deleting additional program files, another window may appear with a list of files. Documents with which the program to be removed interacted in some way are displayed here, or they contain information about it.

The remaining files must be carefully reviewed and deleted only those that relate to the program being deleted. If you are not sure or do not understand this well, skip this step and click the “Finish” button.

Startup manager

Using Revo Uninstaller, you can configure the autorun of those programs that are necessary for work immediately after turning on the computer. To do this, you need to find the startup manager among the tools.

You should understand that many developers like to install their software into autorun so that they can always use it. In reality, computer owners may not be aware of this and may not need these programs. They should be disabled, since every extra task for autorun is additional system loading time and slows down its operation.

Next, in the manager window that opens, leave “checkmarks” next to those applications that you need immediately after turning on the computer.

Cleaners

For convenience, the browser, junk files, Office and Windows cleaner are divided into different menu items. However, they should be used for one purpose: to delete unnecessary files generated during work:

For the browser, this is cache, cookies, search history, download history, history of visited sites and other information.

For Windows, this is the cache, the history of work in the system, recycle bin files and other unnecessary garbage, as well as cleaning the registry and unnecessary operating system files on the hard drive.

For Office, this is cleaning unnecessary files that appeared when working with the corresponding office applications.

In general, it’s hardly worth seriously changing the settings here, since the operating systems and main programs are designed the same for everyone, and therefore the extra files are practically the same. After removing them, you will immediately see how much more productive your computer has become and how much faster the work on it has become.

I get asked a lot of questions regarding how to properly remove software from a computer. Today I will talk about a utility that I have been using for a long time and I think that there is no better one - this program is Revo Uninstaller. If you don't agree with me, tell me about your choice.

Every day we install new programs on our PC, update something, simply try something out - we only keep the ones we like and really need. But to test the program, it must be installed on your computer.

During the installation process, the program places its files and modules in various folders and parts of the system: something is written to startup, something to the registry, something to various user folders. The process of integrating the program into the system partition of the hard drive is quite deep.

In this situation, the removal process does not always go smoothly, and it is simply impossible to manually delete all program files. That. A program that is not completely erased takes up disk space, adds garbage to the system registry, and creates problems for the operating system.

removing files using Revo Uninstaller

The Revo Uninstaller utility is a good replacement for the native “Add or Remove Programs” option included in Windows OS.

The main advantage of the utility is that during the process of uninstalling a program, it scans the operating system for traces of the uninstalled program on the hard drive. In addition, Revo Uninstaller has many of the same features as the popular CCleaner:

Autorun Manager management;
receive detailed information about a specific program;
find and delete unnecessary temporary files using the “Junk File Cleaner”;
search and correct errors in the registry, etc.

Setting up Revo Uninstaller

1. You can download the program from the official website of the developer, or you can download a portable version of the program using my link (in this case there will be no need to install it, you will just need to download it and run it to work).

2. Launch the program -> go to “Options” in the top toolbar of the program (if it is not available, select “Windows Tools” in the left panel and try again -> in the window that opens, select the language “Russian / Russian”.

3. In the same window, go to the “Uninstaller” tab and tick the indicated items.

The first of them means that if after uninstalling the program the system becomes unstable, then it will be possible to “roll back the system” to the previous state to resume the operation of the OS.

The second highlighted item means that files found by Revo Uninstaller will not be permanently deleted, but will be placed in the Recycle Bin, from where they can be restored.

how to use Revo Uninstaller

1. Run the application in the “Uninstaller” section and specify the program you want to remove. The application will ask you to confirm your decision, click on the “Yes” button.

2. A window for selecting the deletion mode will open:

Built-in – the uninstaller of the Windows operating system will start without additional verification.
Safe – performs step one and additionally searches the hard drive and the registry for items related to the file being deleted and safe for deletion.
Moderate – the default item; includes the previous paragraphs plus an advanced search for information related to the program being removed.
Advanced is the slowest mode that checks the hard drive and system registry for any information about the program being removed.

3. Select the mode that suits you and click the “Next” button. The process at each stage will display relevant information to you and ask you for confirmation to continue the process of removing traces of the program from your PC.

4. At the end of all stages, the program will inform you that the operation of removing the program from your computer was successful.

I advise you to use this program so that your computer becomes less clogged and you need to take measures to optimize the system’s operation less often.

Hello, friends! In this article we will talk about what it is uninstaller programs. They are remembered when programs appear that do not want to be removed using standard Windows tools. I’ve had a program hanging around for several months now that I just can’t get my hands on. This is a great reason to delete it and write an article about it. I hope it helps those who are in a similar situation.

There are a lot of assistant programs for the complete removal of all components and program remnants. We will be primarily interested in the free versions of these utilities. There are fewer of them. In this article we will look at probably the most popular and naturally free program - Revo Uninstaller.

You can download the program from the official website

Or just by pressing a button

The program installer is 2.5 MB in size. Download and install the program. Installation is simple. During the process, only the program is installed without any additional - unnecessary programs that need to be cleaned from startup.

Removing an uninstallable program

First, let's try to remove our hanger using standard Windows tools. Let's go to Start > Control Panel > Uninstall a program. Select the program and press the button Delete. You can see what came out of this in the picture below.

Launch the installed Revo Uninstaller

Select our program and click on the Delete button. An uninstaller warning appears in which we confirm our intentions

In the next window we need to select the uninstallation - removal mode. Choose Advanced, which performs a deep and thorough check of the remaining application information. Click Further

A restore point is created if such a feature is enabled on the system. (You can read how to enable and use this feature in the article How to perform a system restore)

When running the built-in uninstaller, an old error occurs. Click OK

After scanning the remaining information, click Further

After finding the remaining items in the register, we are asked to highlight the items indicated in bold. You can click on + to expand the view of the found elements (as shown in the figure). Select and click Delete

A warning appears asking you to click Yes

After deleting, we see a blank screen (picture below) - which means the registry is clean. Click Further

Revo Uninstaller searches for remaining files and folders on the disk. Select the results and click Delete

A warning appears about deleting selected objects to the trash. Confirm by clicking the button Yes. In the program settings you can configure the deletion of files: either to the trash bin or completely

The program displays a blank window indicating that all files and folders have been successfully deleted. Click Further

In the next window, complete the uninstallation procedure by clicking the button Ready

Our program was successfully removed from the system with all entries in the registry and files on the hard drive.

Hunter Mode

Revo Uninstaller can switch to Hunter mode. This mode will help us if the program is not displayed in the list of installed programs. Or after an incorrect deletion, an error window opens when loading, or after treating the computer for viruses, a window with an error appears constantly when loading. In general, it interferes with normal work at the computer.

To switch to “Hunter” mode in the main window of the Revo Uninstaller program, click the corresponding button Hunter mode

At the same time, a sight appears on the screen, and the main program window is minimized to the notification area.

You need to hold down the left mouse button on this sight and move it to the desired element. Take for example the DropBox icon in the notification bar. (You can read more about the Dropbox service in the article How to use Dropbox?)

Release the left mouse button and the Revo Uninstaller context menu appears with possible actions for the selected item. Select the required one - delete (uninstall), or click the mouse in another place to close the menu

This gives us another intuitive opportunity to correctly and completely remove the element we need.

To return to the main window, you can double-click with the left mouse button on the Revo Uninstaller icon in the notification area or right-click on the icon and select from the menu that opens

Here you can use the Revo Uninstaller removal program to uninstall almost any program.

Conclusion

In this article we looked at what it is uninstaller Revo Uninstaller programs. We downloaded it, installed it and tested it in practice. Revo Uninstaller lives up to its reputation and easily coped with the removal of a program that was too tough for standard Windows tools.

This program provides excellent functionality for managing Windows startup. To get to it, you need to click on the Tools button and select Startup Manager on the left. Then, you can uncheck unnecessary programs or remove them altogether, as shown in the figure below, through the context menu or the “Delete” button in the top panel of the program

Also in the figure we see the Junk File Cleaner function. We are familiar with a similar function from the CCleaner program.

In general, the program is practical, universal and, most importantly, free. We will use it)

Video showing how it works uninstaller- Revo Uninstaller

As always, I will be glad to see your comments, clarifications and recommendations in the comments.

Thanks for sharing the article on social media. All the best!

Hello dear Friends of our portal Video Teacher - online video training on any topic! In this video lesson article we will talk about what it isuninstallerprograms. They are remembered when programs appear that do not want to be removed using standard Windows tools.

1. Download and install Revo Uninstaller

You can download the program from the official websitehttp://www.revouninstaller.com/revo_uninstaller_free_download.htmlThe program installer is 2.5 MB in size. Download and install the program. Installation is simple. During the process, only the program is installed without any additional - unnecessary programs that need to be cleaned from startup.

2. Removing a program that cannot be removed

First, let's try to remove our hanger using standard Windows tools. Let's go toStart > Control Panel > Uninstall a program. Select the program and press the buttonDelete. You can see what came out of this in the picture below.

Launch the installed Revo Uninstaller

Select our program and click on the Delete button. An uninstaller warning appears in which we confirm our intentions

In the next window we need to select the uninstallation - removal mode. Choose Advanced, which performs a deep and thorough check of the remaining application information. Click Further

A restore point is created if such a feature is enabled on the system. (You can read how to enable and use this feature in the article How to perform a system restore)

When running the built-in uninstaller, an old error occurs. ClickOK

After scanning the remaining information, click Further

A warning appears asking you to click Yes

After deleting, we see a blank screen (picture below) - which means the registry is clean. Click Further

Revo Uninstaller searches for remaining files and folders on the disk. Select the results and click Delete

The program displays a blank window indicating that all files and folders have been successfully deleted. Click Further

In the next window, complete the uninstallation procedure by clicking the button Ready

Our program was successfully removed from the system with all entries in the registry and files on the hard drive.

3. Hunter mode

Revo Uninstaller can switch to Hunter mode. This mode will help us if the program is not displayed in the list of installed programs. Or after an incorrect deletion, an error window opens at boot or after treating your computer for viruses A window constantly pops up with an error when loading. In general, it interferes with normal work at the computer.

To switch to “Hunter” mode in the main window of the Revo Uninstaller program, click the corresponding button Hunter mode

At the same time, a sight appears on the screen, and the main program window is minimized to the notification area.

This gives us another intuitive opportunity to correctly and completely remove the element we need.

To return to the main window, you can double-click with the left mouse button on the Revo Uninstaller icon in the notification area or right-click on the icon and select from the menu that opens

Revo Uninstaller is a program that can be used to effectively clean your computer of unnecessary programs. Its peculiarity is that it can delete program files from user folders and other directories on the computer’s hard drive.

The capabilities of Revo Uninstaller are not limited to just removing programs. Using this utility, you can clear the folders of browsers and other applications from temporary files, delete unnecessary system files, and configure programs to autostart when you turn on the computer. We will use the Pro version of Revo Uninstaller, since it is the one that provides the most effective work. Let's look at the main points in using this program.

1. First of all, download the program from the official website of the developer. You can do this for free, but after 30 days you will have to buy the full version.

2. We install it on your computer.

Revo Uninstaller will only work with an administrator account or on behalf of an administrator.

3. Launch the program. A menu opens before us with its capabilities. Let's look at the most important ones.

How to remove a program using Revo Uninstaller

Uninstalling programs using Revo Uninstaller is somewhat different from the same process using standard program removal in Windows, so it should be considered in detail.

1. Go to the “Uninstaller” tab and select the one you want to remove from the list of programs.

2. Click the “Delete” button. After this, the process of uninstalling the program will begin. It may look different for each application. Check the required boxes and follow the prompts. Upon completion of the uninstallation, the uninstaller will issue a report indicating the successful completion of the process.

3. Now comes the fun part. Revo Uninstaller offers to scan your computer for files left over from the uninstalled program. Scanning can be carried out in three modes - “Safe”, “Moderate” and “Advanced”. For simple programs, a moderate mode will be sufficient. Click the “Scan” button.

4. Scanning takes some time, after which a window appears displaying the directory with the files remaining after deletion. Click “Select all” and “Delete”. This completes the process of uninstalling the program!

5. After deletion, a window may appear with other files that the program offers to delete. You need to carefully review the list and select for deletion only files related to the program you are deleting. If you're not sure, just skip this step without deleting anything. Click “Finish”.

How to Clean Browsers Using Revo Uninstaller

Over time, user browsers accumulate a large amount of unnecessary information that takes up space on the hard drive. To free up space, follow the following sequence.

1. Open Revo Uninstaller, go to the “Browser Cleaner” tab.

2. Then check the boxes for what exactly needs to be cleaned in the required browsers, and then click “Clean”.

When clearing browsers, be prepared for the fact that after this you will need to re-enter logins and passwords on many sites.

How to clean the registry and hard drive

1. Go to the “Windows Cleaner” tab.

2. In the window that appears, check the necessary boxes in the “Traces in the registry” and “Traces on the hard drive” lists. In this window, you can choose to empty the Recycle Bin and delete temporary Windows files.

3. Click “Clear”

How to set up startup programs using Revo Uninstaller

The program will help you assign those applications that you will need immediately after turning on your computer.

1. Open Revo Uninstaller, launch the “Startup Manager” tab

2. Here is a list of programs, the checkbox next to which means that the program will start automatically.

3. If the required program is not in the list, click “Add” and in the next window find the required program by clicking on the “Browse” button

4. The program will be added to the list, after which you just need to check the box next to it to activate autorun.