How to turn a page horizontally in Word (landscape orientation). How to flip a separate sheet in Word, instructions

This question interests, perhaps, every second user of the Word program. Why is this necessary? For example, in cases where it is necessary to place graphs, diagrams, diagrams that, due to their scale, do not fit on a vertical sheet. In this material, we will look at several ways to flip a sheet horizontally in Word.

As you already understood, by default, the Word text editor provides for portrait page orientation. But it can be changed using simple methods that even a novice user can handle. Let's look at each method in more detail. Which method is right for you depends on the version of Word you are using.

How to flip a sheet horizontally in Word? Version 2003 and earlier

So, to make the sheet horizontally oriented in Word 2003, 1997 and 2000, the user will have to perform the following algorithm:

First, go to the “File” tab located on the toolbar, then select the “Options” item.
In the "Margins" section, in the line called "Orientation", the user will be offered two options for page orientation: portrait and landscape.
Select “Landscape” and click OK.

How to flip only one sheet in the entire document?

If the user needs to flip horizontally only one sheet in the entire document, then the following steps should be followed.

First you need to select the part of the text whose orientation you want to change. Then go to the “Options” item. Then we select the vertical orientation we need. In the tab called “Apply”, select the “to selected text” option. Afterwards we confirm all actions by pressing the OK button.

How to flip a sheet horizontally in Word? Versions 2007 and newer

So, if you prefer to use the text editor Word 2007 and newer, then this section is for you. Here we will offer options on how to make a landscape orientation for a text document or a separate part of it.

The first thing to do is go to the tab called “Page Layout”. Then go to the “Orientation” section. By default, the text editor sets portrait orientation. What we need is a landscape one. We select the option we need, and then confirm the actions taken by pressing the OK button.

If you need to turn only one sheet vertically, all actions completely repeat the actions for Word 2003. That is, first you need to select the part of the text whose orientation you want to change. Then go to the “Options” item. Then select landscape orientation. In the tab called “Apply”, select the “to selected text” option. Afterwards we confirm all actions by pressing the OK button. The only differences are in the different location of the settings button on the tab with all the parameters.

By the way, it is worth noting that often the user does not change the orientation of the sheets on the computer, but does this when printing the document. Currently, almost all printers allow you to change the orientation of sheets while printing documents. The truth in this case is that all sheets will be rotated, and the quality and appearance of the document may suffer.

In this article, we examined several options for how to flip a sheet horizontally in Word, using methods suitable for several versions of the text editor. As you already understand, there is nothing complicated about this. It is enough just to follow the specified algorithm, strictly carry out all the steps, only in this case the result will not disappoint you, and the process itself will not cause difficulties.

By default, when creating a new document in Word, the sheet is positioned vertically (portrait orientation). Flipping a sheet into a horizontal (landscape) view is often necessary when you need to create a presentation or when working with wide tables, when all the columns do not fit the width of the page.

In this article you will learn how to flip a sheet horizontally (landscape orientation) in Word.

Flip a sheet in Word 2003

Changing the orientation of all pages of a document

In order to turn all pages in Word 2003, you need to do the following.

Click the "File" button in the upper left corner and go to "Page Options."
In the window that opens, in the first tab “Fields”, find the “Orientation” setting.
Select the required page type - portrait or landscape - and click OK.

Changing the orientation of multiple document pages

To flip horizontally only a few pages of a document in Word 2003, do the following.

Highlight the text on the required pages.
Click the "File" button in the upper left corner and go to the "Page Options" menu.
Specify the required page orientation and click “Apply to selected text” at the bottom. Click OK.

This way, the orientation will change to horizontal (landscape) only on those pages that have been selected.

Flip sheet in Word 2007, 2010, 2013, 2016

Change the orientation of all pages in a Word 2007, Word 2010 document

To change the book orientation to landscape on all pages of a document, do the following.

Click the Page Layout tab (in Word 2016, this menu is in the Layout tab) at the top of the document.
In the Page Setup category, click the Orientation button.
To flip all pages horizontally, select “landscape”.

After selecting horizontal (landscape) orientation, all pages of the document will change their orientation. How to turn only some pages, read below.

Changing the orientation of some pages in a Word document 2007, 2010, 2013, 2016

To turn only one or more pages in a document, do the following.

Place the cursor at the beginning of the first character on the page you want to turn.
Click the Page Layout tab (in Word 2016, this menu is under the Layout tab) in the vertical menu at the top of the document.
In order to turn only one page, you need to create breaks in the document. Click "Breaks" and select "Next Page".
Click on this page of the document in the “Page Layout” menu and select “Orientation” - “Landscape”.

After performing these steps, all pages will turn over starting from the one on which you set the break.

To ensure that only this page remains upside down, place the cursor at the end of the last character of the page and make another break, as shown above.

Now, you can return the orientation of all subsequent pages. To do this, place the cursor at the very beginning of the next page and select “Page Layout” - “Orientation” - “Portrait”.

Thus, we ensured that only one page in the document has landscape orientation, and the rest are portrait.

Quite often, when working with text in Microsoft Word, it becomes necessary to rotate the sheet horizontally. And how to rotate a sheet in Word? Let's figure it out.

In Microsoft Word, there are two types of sheet layout - vertical and horizontal. The vertical arrangement of the sheet is called a book spread, the horizontal one is called landscape.

The default page orientation in Word is portrait. However, when you are working with charts for example, or when you are creating something like a leaflet, you may need to rotate the sheet 90 degrees, i.e. switch to landscape sheet.

Luckily, Word makes it easy to switch to landscape mode.

Landscape view in Word 2003

If you are using Word 2003, then select the menu item File -> Page settings.

Then in the dialog box Page settings select tab Fields.

Under the heading Orientation click Landscape. A blue outline should appear inside the edge of the window with an image of a leaf in a horizontal position.

If you want all sheets in your document to be in landscape orientation, then simply click the OK button at the bottom of the dialog box. If you want to apply changes only from the current sheet and to all the following, then select the option until the end of the document Apply In chapter Sample, and then click OK.

In addition, you can make any pages in the middle of the document landscape. Simply select the pages you need before opening the " Page settings" And then, following the instructions described above, select the option to selected text in the drop-down list called Apply.

Landscape sheet in Word 2007, 2010

In newer versions of Word (2007, 2010), changing the sheet orientation is even easier. Go to the tab Page layout main menu, in the command group Page settings select Orientation -> Landscape. All pages of the document will change orientation.

If you need to rotate only one or several selected pages, click on the button in the lower right corner of the command group Page settings.

A dialog box will appear in which, as already described above, you can set the rotation of the sheet and the scope of application of the orientation change.

You might be interested in learning how to delete message history on Skype or why your laptop gets hot.

Most users who work with the Word text editor know how to change the sheet orientation from vertical to horizontal and vice versa. This does not cause any problems, since all you need to do is press one button.

But when it becomes necessary to expand only one sheet horizontally, most users encounter difficulties. In this article we will look at two ways to do this. The article will be useful to users of modern versions of Word, such as Word 2007, 2010, 2013 and 2016.

How to rotate only one sheet using section breaks

The first way is to use section breaks. In order to expand horizontally only one sheet, you need to separate this sheet from the rest of the document using section breaks. One gap should be placed before the sheet and one gap after the sheet. After this, this sheet can be expanded horizontally and the rest of the document will not be affected.

So, let's say you have a sheet that you want to expand horizontally. To do this, place the cursor immediately above this sheet, that is, at the end of the previous sheet. After that, go to the “Page Layout” tab, click on the “Breaks” button and select “Next Pages”. This way you will set a section break before the sheet that needs to be expanded horizontally.

After this, place the cursor at the end of the sheet that you want to expand horizontally, and again click on the “Breaks” button and select “Next Page”. This will place the section breaks above and below the desired sheet.

To make sure that the breaks are set in the right places, go to the “Home” tab and click on the “Show all characters” button. This will allow you to see the placement of section breaks and correct them if they were placed incorrectly.

In the screenshot below you can see what a section break looks like at the end of the page.

After setting the section breaks in the desired positions, you can begin to rotate the sheet into a horizontal orientation. To do this, place the cursor on the sheet that you want to expand horizontally, go to the “Layout” tab and change the sheet orientation from “Portrait” to “Landscape”.

If the gaps were placed correctly, then only one sheet should unfold into a horizontal orientation, while the rest should remain vertical.

How to rotate only one sheet using Page Options

You can also expand only one sheet horizontally through the Page Setup window. This method is a little more complicated, but it can also be used.

To begin, you need to position the cursor one page above the sheet that you want to expand horizontally. After this, you need to open the “Page Layout” tab and click on the small “Page Options” button. The location of this button is marked in the screenshot below.

This will open the Page Setup window. Here you need to select the “Landscape” option, apply this option “To the end of the document” and save the settings with the “OK” button.

As a result, all pages below the selected one will be rotated to horizontal orientation. In order for only one sheet to remain in horizontal orientation, you need to move the cursor one page down and repeat the procedure. Only this time you need to select the “Portrait” option.

If everything is done correctly, you will get one sheet in horizontal orientation, and the rest in vertical orientation.

When working with text documents, it is often necessary to change the page orientation from vertical (portrait) to horizontal (landscape). In this material we will talk about how to make a horizontal page in the Word text editor. The material will be relevant for all modern versions of Word, including Word 2007, 2010, 2013 and 2016.

If you want to make all pages of a Word document horizontal at once, then this is done very simply. All you need to do is go to the “Page Layout” tab, click on the “Orientation” button and select “Landscape”. After this, all pages of your document will become horizontally oriented.

But, very often, this option is not suitable and you need to make only one horizontal page and leave the rest in vertical orientation. There are two ways to do this, and we will look at both of these methods below.

Method number 1. Use “Page Options”.

In order to make one page horizontal you need to place the cursor on the page that comes before the one that should be horizontal. After this, you need to go to the “Page Layout” tab and click on the “Page Options” button.

As a result, the “Page Settings” window will appear in front of you. In this window, you need to select “Landscape Orientation”, apply this setting “to the end of the document” and save the changes using the “Ok” button.

As a result, all pages below the one on which the cursor was placed will become horizontal. Now you need to move the cursor down one page and open Page Setup again. Now in the Page Options you need to select “Portrait Orientation” and apply this setting “to the end of the document.”

If everything was done correctly, the result will be one page in horizontal orientation, and the rest in vertical orientation.

Method number 2. Use page breaks.

The second way is to use page breaks. In order to make one page with a horizontal orientation, you need to put one break before this page and one after the page. Thanks to these breaks, you can change the orientation of this page without affecting the orientation of all other pages in the document.

In order to be able to see page breaks, you need to enable the display of all symbols. To do this, go to the “Home” tab and click on the “Display all signs” button.

Next, you need to place the cursor on the page that comes before the one that should be horizontal. After placing the cursor on the desired page, go to the “Page Layout” tab, click on the “Breaks” button there and select “Next Page”.

After this, you need to move the cursor to the end of the page that should become horizontal, and again set the break from the next page. After setting the breaks, you simply need to change the page orientation to landscape using the Orientation button on the Page Layout tab.

If everything was done correctly, then you should get something like the screenshot above. First there is a page break, then one horizontal page, then another break and the rest of the pages in the usual vertical orientation.

In chapter Other computer to the question How to make a sheet horizontal in WORD 2010? given by the author Roma Caraman the best answer is print... properties... landscape

2 answers

Hello! Here is a selection of topics with answers to your question: How to make a sheet horizontal in WORD 2010?

Answer from Oleg Smirnov
Maybe like in 2007 - page parameters - fields - custom fields - orientation - landscape

Answer from Victor Shulga
Page layout - orientation - landscape.

Answer from Vlad Sergiuchuk
Page parameters (select portrait orientation) - Paper size (where A4 is selected, select A4 (rotated))

Answer from Alex Gordon
The video method helped me

Microsoft Word seems to be one of the most popular text editors, which, due to its versatility, has become widespread. By default, it uses the “portrait page” orientation method rather than landscape orientation, which is not always convenient. In a number of situations, users are interested in how to flip a sheet horizontally in Word.

After all, quite often, you need to make a landscape sheet in Word, since the document format requires horizontal positioning of the sheet. It is also called Landscape orientation. Since the need to make a landscape page in Word seems to be one of the most popular functions, we will look at how to flip a sheet in Word in different versions of the program in more detail.

How to flip a sheet in Word 2016

First of all, it is worth noting that the user has the opportunity to either rotate 1 sheet in Word or perform this procedure for all pages of the document. The second option is much simpler, as it literally takes a couple of mouse clicks, while making a single landscape sheet is somewhat more difficult.

In order to rotate all sheets in Word, you should follow the following algorithm of actions:

Find the Page Layout category at the top of the window, which contains all the parameters we need;
Click on the Orientation item, which will open for the user two options for positioning the sheet;
Change the standard orientation to landscape, which will change the position of all sheets in the document.

IMPORTANT! Such manipulations are extremely simple, but they do not allow you to make one page landscape. Therefore, we recommend sticking to a more complex but functional algorithm in cases where the user needs to change the orientation of only one sheet.

This method is somewhat more complicated and involves placing the boundaries (breaks) of the section, which is why it takes a little more time. To make ONE landscape page in Microsoft Word, you need to:

Open the Home tab and select a category with an icon that resembles an inverted P;
Since you only need to turn one sheet, you need to place breaks at the beginning and end of the page. You can do this by using the Page Layout tool, selecting the Breaks category and clicking on Next Page;
Once both sheet borders have been set, you will need to follow a similar procedure to when you wanted to flip all the sheets in a Word document.

This operation allows you to quite successfully make a sheet horizontally in Word by changing the orientation of the sheet and, as a result, a finished landscape page. If this could not be done, most likely an error was made when delimiting the page.

How to rotate a page in Word 2010

If you need to turn a sheet in Word 2010 or all pages of a document, you will have to follow the procedure described above. The fact is that this function has not undergone major changes and starting from version 2007 and higher, to turn a page horizontally in Word you will need to perform the same steps. As a rule, the difference lies only in the appearance of the panel and design details, while the algorithm itself remains unchanged.

This release generally seems to be borderline, since the horizontal position of the page here changes in the same way as in later versions of this office suite.

How to rotate a page in Word 2007

As we wrote earlier, it is possible to rotate one sheet in Word 2007 using the standard method, but to change the entire document, you will need to perform a number of other manipulations. First of all, you need to find Page Setup at the top of the window and click on the arrow icon.

After this, you need to open the Margins tab and select the page orientation at the bottom of the window. By default, the user is set to portrait orientation, which will need to be changed to landscape to achieve the desired result. The horizontal orientation changes to portrait in a similar way, allowing you to experiment with different orientation styles. Thus, it will not be difficult to expand a page horizontally in Word.

How to flip a sheet in Word 2003

This release of Word is perhaps one of the oldest and is rarely used by users. However, we will look at how to make the page position vertical.

ADVICE! If you need to change the entire document, just use the instructions for the 2007 edition of Office.

However, if the user needs to rotate one sheet in Word 2003 horizontally, he will need to select the desired part of the text, then go to the Orientation menu, change to Landscape and apply the changes to the selected text. Thus, making a landscape page in Word 2003 is not difficult. A similar method is used in earlier versions, which allows Word to flip a sheet horizontally even if there have been no program updates for many years.

Video to help

Greetings! Sometimes when creating a document in Word, you need to turn the page to landscape position (horizontally). By default, all pages in the office program are arranged vertically (portrait orientation), and some users do not know How can I turn the page horizontally?. Today we will look at how to do this.

The steps described below will be relevant for Word 2007, 2010, 2013. So, turning the page in Word is as easy as shelling pears, now you will see for yourself. By the way, there are two ways: the first is when you need to turn all the sheets in Word, the second is when you need to turn only one page. Let's take a look at these two options.

How to flip all pages horizontally in Word

To do this, go to the “Page Layout” tab and find the “Orientation” button. By default, portrait orientation is set, click on this button and change to landscape orientation.

After this, all sheets in the program will turn over to a horizontal position. As you can see, all this is done in a matter of seconds.

How to turn only one page horizontally in Word

Sometimes it is necessary for the document to contain sheets, both horizontally and vertically. This is usually needed when writing books or manuals. So, to create a document with mixed page orientation, we again need to go to the “Page Layout” section and click on the button located in the lower right corner.

The Page Setup window opens, where you can set the page orientation of the document. For example, we need a horizontal orientation, so we’ll choose that. After you have chosen the orientation, pay attention to the “Apply” item, where you can set what the selected sheet orientation will be applied to (to the entire document or to the end of the document).

We need to select "to the end of the document". After that, click the “OK” button. Now you can see that the new page at the bottom has become different in position from the top. Next, let's assume that after this flipped page we need to return the orientation to the bottom sheets. Again, go to “Page Setup”, set the required orientation and apply it to the end of the document.

Friends, nothing is complicated, as you can see for yourself, there is no flip a sheet of paper horizontally in Word even a child can do it. If you have questions, you can ask them in the comments. That's all, all the best!

By default, in Microsoft Word, all sheets have a portrait orientation, that is, they are arranged vertically, but sometimes it becomes necessary to flip them so that they take on a landscape view. In this article we will talk about how to make a landscape sheet in Word, released in 2007. We will tell you how to perform these manipulations with all sheets at the same time and with each one separately.

We turn over the sheets of the entire document

Before talking about horizontally, it is worth saying that the instructions will be common to all versions of the program, and Word 2007 will serve as an example. In some versions, the location of some interface elements, their display and name may change, but the principle is the same for all.

So, now you will learn how to flip sheets horizontally in Word. Please note that after following these instructions, all sheets in the document will turn over. If you need to turn over only one or a few, then proceed directly to the next method.

To turn over all sheets in Word, you need to:

In the open document of the program, move to the “Page Layout” tab (in later versions this tab is called “Layout”).
Click the "Orientation" button.
In the drop-down list, select the required orientation: in this case, “Landscape”.

As you can see, after completing all the instructions in your document, all pages will change orientation to landscape. To return everything to the way it was, you need to do all the steps again, only in the last one select the “Portrait” orientation.

Turning one sheet of paper over in a document

You already know how to flip sheets horizontally in Word, but sometimes you need to change the orientation of only one or several sheets. In this case, the previous method is no longer suitable, but you can use what will be demonstrated now.

So, to change the location of some pages in Word, follow the following instructions:

First, you need to select the part of the text that you want to move to the landscape sheet. However, please note that after moving it, the text will be on a separate page. If that's what you were thinking, then continue.
Go to the Page Layout (Layout) page.
Click on the "Margins" icon in the "Page Setup" tool group.
In the list that appears, select "Custom Fields" located at the very bottom.
In the window that appears, change the orientation of the sheet, this option is located in the "Orientation" area.
In the "Apply" drop-down list located at the very bottom of the window, select the line "To selected text".
Click "OK".

After completing this rather extensive instruction, move the selected text to new sheets with landscape orientation.

Conclusion

Now you know how to flip a sheet horizontally in Word. As you can see, both instructions are quite easy to use and do not require deep knowledge. And following the attached instructions, any user can create a landscape sheet in Word.