How to turn off light notification on iPhone. How to enable and configure flash flashing when there is an incoming call on iPhone

Apple smartphones are known for their wide range of features. Technologically sophisticated devices are in great demand all over the world due to their functionality. iPhone supports multiple notification modes. This is not only a sound and vibration alert. You can also notice the alert using a light signal. This article will look at ways to turn on the flash when making a call on your iPhone.

The flash will be convenient to use:

• in meetings when you need to mute your device;
• when using a case covering the phone screen;
• in the dark, if the phone is on silent mode.

This set of notifications was not created by chance. They allow you to use them in various situations. For the first time, the light type of notification was used on 4th generation devices. The flagship models were the iPhone 4 and 4S. In the iOS system settings, users could activate an LED alert, which would start signaling when a call or SMS message was received. Activating the function is easy. All settings were made from the system menu.

With each new version of the mobile operating system, options were added that were used not only to display incoming calls, but also SMS messages.

Flash control for incoming calls and SMS is carried out through the “Universal Access” section. It is located in the gadget's system settings.

There is a separate item in the options menu – “Hearing”.

It activates a light signal, and also adjusts subtitles and the volume balance between sound channels when a headset is connected.

The flash was designed for people with hearing problems. The LED lamp located on the back of the phone begins to pulsate brightly when there is an incoming call or SMS, attracting attention.

Ways to turn on the flash when calling and SMS

All settings are located in the phone system menu. To activate the option, you will need to perform the following steps:

1. Go to the “Settings” section in the main menu.

1. Select "Basic".

1. In the “Hearing” section, activate the “LED flash for warning” function.

After this, the function will be active. You should immediately check whether it works. To do this, just call your number or send a message.

If the mode is active and there is no notification light, you will need to restart your iPhone. To do this, just press and hold the Power button. It is located on the top panel of the smartphone. After holding it for a few seconds, the screen will go dark and a lever will appear that says “Turn Off.”

By swiping it to the right, the phone will be turned off. After this, you should press the Power key again and wait until the iPhone completely boots up.

How to enable silent mode

Starting from version 9 of the iOS mobile operating system, there is an additional setting for the light notification option when making a call on the iPhone. With its help, you can select additional LED notification parameters. You can enable a mode in which notification will be made by flash with the sound turned off.

To do this you need to follow these steps:

1. Click on the “Settings” icon in the main menu of the iPhone.

1. Select the “Basic” tab.

1. Click on the “Universal Access” item.

1. Go to the “Hearing” section and click on the “Flash Alerts” tab.

1. By activating the mode (switching it to the “On” position), you will see a new window. In it, to activate the function, you need to move the button to the right. It is located opposite the inscription “Flash in silent mode”.

Now, when the user mutes the iPhone, the LED notification will continue to work. This type of notification becomes active only in silent mode. If the ringer switch on the smartphone is in the active position, there will be no blinking from the lamp on the back side when making a call.

Once the light alert is activated, it will work when the device is locked. If the iPhone is active, the LED lamp on the back panel will not light up when a notification or call arrives.

Why doesn't the flash work?

Users, after rebooting the device, may find that the warning light has become inactive. This may be due to an internal system glitch in the software. Such errors occur for reasons beyond the control of the iPhone owner. Access to system resources is limited. Users cannot edit operating system files and settings.

To fix this, just go to the device settings. You should check if the flash is on when making a call. To do this, in the “Basic” tab, you need to go to “Universal Access”. If the inscription next to the inscription “LED flash for warnings” or “Flash for warnings” is not active, it must be turned on. To do this, move the lever to the right.

The notification light may not work when you reset your iPhone to factory settings. With this action, all settings made by the user previously in the smartphone settings will be reset. To restore them, you should make backup copies to iCloud or iTunes.

Another common reason for the warning light failure may be technical problems. If the device is dropped, the contacts powering the LED lamp may be damaged. To verify that this is the cause, follow these steps:

1. On the unlocked main screen, swipe up from the bottom frame to activate the hidden menu.

1. At the bottom left of the new screen there will be an image of a lantern. By clicking on the icon, the LED backlight is activated.

If the lamp does not work after turning on the flashlight, then there is technical damage to the smartphone. To fix them, you should go to a service center. It is not recommended to disassemble the iPhone on your own to repair damage. This can lead to complete failure of the phone.

How to turn off flashing when calling

To turn off the light alert, the user must do the following:

1. Go to the “Settings” section by clicking on the icon in the main menu.

1. Select the “Basic” section.

1. Go to the “Universal Access” tab.

1. In the “Hearing” section, move the lever to the left. It is located opposite the inscription “LED flash for warning”.

After this, the function will be deactivated.

Results

The considered operations to activate the light signal are performed in several steps. Apple has introduced LED notification settings for all smartphone models, starting from version 4 and higher. Users can enable a general mode in which the flash will work when there is an incoming call and SMS.

Additionally, with the release of version 8 of the iOS mobile operating system, new functions have become available that allow you to activate the LED glow only when you turn off the sound on your smartphone. If you still can’t turn on the flash or have questions after reading the instructions, you can leave comments under the article. Specialists will give a detailed answer and help solve the problem with your smartphone.

Video instruction

A video was made especially for readers with a detailed analysis of each method of activating a function on a device.

• To turn on the flasher on your iPhone, go to the Flash Alerts section. Then all that remains is to switch the warning slider of the LED device to the on position. (Figure 3)

After the manipulations, the turned on indicator light of the gadget will flicker three times to indicate new incoming calls, SMS and various notifications. The display function is useful for people with hearing difficulties. It will ideally complement sound and vibration indication.

Flash on iPhone call for silent mode

Alternatively, you can set the blinking for silent (quiet) mode. This is very important when you are on the street, on vacation in a noisy place - where the sound signal is unlikely to be heard. The flickering LED light in silent mode will prevent important calls and messages from being missed. Enabling the mode is done as follows:

• Open “Settings” from the main iPhone screen and go to the main settings section. (Fig. 4)

• Go to "Universal Access". In the window that opens, scroll down to the “Hearing” item. (Fig. 5)

• Tap Alert Flash and turn it from silent to on. (Fig. 6)

• Don't forget to check the functionality of the iPhone's LED lamp - the switched on light indicator should blink several times when there is an incoming call or notification.

How to turn off flash when calling on iPhone

Not everyone likes the fact that the iPhone starts blinking during an incoming call.

Some people sooner or later become tired of blinking; for example, it can interfere with sleep at night.

Disabling it is as easy as turning it on. To prevent the flash from disturbing you when making a call on your iPhone, follow these steps:

• Go to the “Settings” section of your device.
• Select "General" and click on "Accessibility". (Fig. 7)

Apple products always have additional features for people with disabilities. And iPhone is no exception. In its settings, in the “Universal Access” section, there are a lot of functions that are designed to help such users.

Among other things, the option to turn on the flash when making a call on iPhone is available in the settings. This feature is intended for users with hearing impairments. However, it can help everyone else too. For example, this feature may be useful for users who work in noisy environments and therefore miss calls.

If you have a similar problem, then this article should help you, here you will learn how to turn on the flash when making a call on your iPhone.

Step #1: Open iPhone Settings and go to General.

If you want to turn on the flash on your iPhone, then the first thing you need to do is go to the settings and go to the “General” section.

Step #2: Go to the Accessibility section and turn on the LED flash for alerts.

After you have entered the “Basic” section, open the “Accessibility” subsection and enable the “LED flash for alerts” function there. This function will be located in the “Hearing” settings block.

That's all. Now, when there is an incoming call, your iPhone will not only play a melody and vibrate, but also blink with a flash. It should be noted that the flash display only works when the iPhone is locked. If the device screen is working, the flash will not blink, although in such a situation it is not necessary.

How to turn on the flash when making a call on other smartphones

By the way, you can implement a warning about an incoming call using a flash not only on an iPhone. For example, on an Android smartphone you can do this using the Flash Alerts 2 application. This application is completely free, and you can download it from.

When you first launch the Flash Alerts 2 app, it will test the flash on your smartphone and ask you to confirm that it is working. If the flash is working, you can set various warnings. For example, in order to set the flash to turn on when there is an incoming call, you need to activate the “Incoming Call” function.

Also, using the Flash Alerts 2 application, you can configure the flash to turn on when you receive an SMS message or notification from other applications.

There are situations when neither sound nor vibration can notify us of an incoming call on an iPhone 5s, iPhone 6, iPhone 4 or any other caller. A very simple way to solve this issue is to turn on a flashing flashlight during a call.

This feature debuted with iOS 5, but I'm sure not everyone has heard of it. The trick is to use LED lighting.

It's next to the camera in the form of a notification LED - it can support notifications by cheerfully letting you know about them.

From the moment you turn it on, when the function is turned on, the LED or other flashlight will blink. This only applies to Iphone 4s, Iphone 5, Iphone 6 and in one word all of the above.

How to make a blinking flashlight on iPhone when there is a call

One night, the flashing ring of my iPhone helped me find it (the sound and vibration were then turned off).

To make such a flashing call, open the settings and go to the “General” section.

Now select “Universal Access” and go to the “Flash Alerts” option.

The last step is to move the sliders to the right and get a flashing signal when you make a call.

The effect is quite impressive. Of course, this only works with devices that have an LED (flash).

The camera LED, flash or flashlight (whoever wants to call it) will signal in about seconds.

This functionality is also provided for most Android devices, you can check if you have it. Good luck.

Have you often noticed how other people’s iPhones flash with flash when there is an incoming call, but still don’t understand how to do this on your device? No problem! Everything is done in a few clicks in the smartphone settings, so no Jailbrake is required for this operation.

Attention! By default, this option is intended for people who have a disability and therefore cannot hear audio. It's strange, though, why Apple hasn't yet added flash on calls as a basic setting for every contact.

Now all incoming calls and messages, for example, in Viber, will be accompanied by a blinking light on the back cover of your iPhone.

Why is this option needed?

As mentioned earlier, by default it is aimed at people with disabilities, but many users appreciated its usefulness and also decided to actively use it. It helps in cases where, for example, the smartphone is face down and there is no way to hear the call or you have set it to silent. Very often, this feature helps you wake up, for example, if you have a silent mode and the room is very dark.

It helps even when the device’s speaker does not work, and what’s worse, the silent mode. This is the only way to understand that there is currently an incoming call if the phone is at a distance from you and there is no way to look at the display.

But there is also a small minus here. Since a built-in diode is used, the phone discharges faster. And if you consider that the flash blinks both during calls and when notifications are received in the form of messages from various instant messengers, then you can expect a significant drain on the battery.

It is important to know! Flash when there is a call can only be activated on iOS 5.0 and higher; accordingly, it is available to owners of iPhone 4 and other more modern generations.

How to disable?

If you are tired of the flash during incoming calls, you can disable it in just a few clicks, just like connecting it.

Possible problems and solutions

• I don't have such an item on the menu. Check the iOS version. If it is below 5.0, then update your smartphone. Activating the flash on a call is available from the iPhone 4, and if your device is an older generation, then there is nothing you can do.
• Activated, but doesn't work. Check to see if the flash option itself is working correctly. To do this, turn on the camera, select manual flash mode and try to photograph some object. Most likely, the module has become unusable and you will have to contact a service center.
• Doesn't work when I use an iPhone. The function only works on a locked screen, that is, when your smartphone is not unlocked and the Home screen is not lit. This is quite logical. If the phone is unlocked, it means that you are performing some operations at the moment, and a flash is not required for an incoming call.

You can activate this option at any time and set it for incoming calls and notifications. Similar features exist in other Android devices, and if you own one, dig into the settings!