iPad won't charge: common causes and troubleshooting. Apple iPad does not charge from a computer - a myth

There are many factors that can cause an iPad not to charge. Most often, equipment refuses to charge from a third-party charger, from a computer (desktop or laptop) from another company. The problem may also lie elsewhere:

mechanical damage to the iPad or connection connector
moisture entering the case and other factors associated with improper operation of the device

Some malfunctions that cause devices to charge poorly can be resolved on your own. Elimination of complex breakdowns should be entrusted to specialists. But before you take the device to a service center, try to solve the problem using simple instructions.

What are the most common charging problems?

Situations in which the iPad does not charge manifest themselves through different symptoms. So, the iPad may suddenly stop charging completely or only in some cases. You may encounter these options:

The device does not charge from the outlet
the device writes: “No charging from the network” or does not show charging
equipment does not charge via USB
The iPad does not charge more than 1 percent (various options are possible - more than 2 percent, etc.)
The charging icon is on, but there is no power
The iPad won't turn on and won't charge when turned off.
The device does not see the charger
Charging speed has decreased significantly

First of all, you need to find out what type of problem is with your iPad. This will help you understand why this situation arose and find the best way to solve it.

Main causes of problems

iPad charging problems can occur due to a variety of factors. Malfunctions can result from falls, impacts, illiterate flashing and other violations of the gadget’s operating rules:

connecting a charger from another company (error notifications will appear on the screen)
connecting the charger to a bad outlet
connecting the tablet to a computer or laptop of another brand or an outdated model of gadget
or charger connector
failure of the battery, lower cable
moisture getting into the gadget body, USB port or battery

In addition, situations arise in which the iPad is fully charged only when it is turned on - this also indicates a problem. The choice of methods for eliminating it and the duration of restoration depend on what kind of breakdown occurred in the gadget.

What problems can you handle on your own?

If the iPad does not function properly only in some situations or even does not charge at all, you can try to solve the problem yourself. To do this, follow these steps:

reboot your device
check the current battery charge level
connect the original charger, check its functionality (replace it if necessary)
check if there are any kinks in the power cord somewhere
clean the connection connector from dirt and dust
try to charge the iPad from different sources: from the network (socket), via USB, from a Power bank

All of these actions can lead to the tablet starting to work smoothly again. However, if after the measures you have taken the gadget still does not work well (does not see the charger, does not turn on correctly), most likely the cause is mechanical damage.

You should not try to fix such problems yourself - this can lead to damage to working parts of the gadget. Repairing the iPad in this case will be even longer and more expensive. To avoid wasting time and money, contact qualified professionals.

Who can you trust to repair your gadget?

If the battery stops receiving power and you cannot fix the problem yourself, you should send the gadget for professional repair. To avoid standing in line at the service center, waiting a long time for repairs and overpaying for services and spare parts, choose a professional contractor on the Yudu website.

Yudu's craftsmen will handle the repair no worse than an Apple service center. All specialists underwent personal data verification when registering on the site. Each of them has extensive experience and positive customer reviews in their personal profiles. Yudu performers will provide a number of advantages:

no queues when ordering
short recovery time for the device
professional repairs using modern tools and original spare parts
low prices for services due to the absence of intermediaries and great competition in the service
completing a task at any time convenient for you
convenient payment methods (cash, non-cash payment; installments are possible)

When choosing specialists, pay attention to their work experience and rating in the system - this will help you hire the most suitable performer.

What actions do Yudu masters perform?

Specialists registered with Yuda quickly restore iPads that are not charging. An experienced master will carry out the work at a low cost.

First of all, the specialist will conduct a full diagnostic of the gadget, tablet battery, charger and other components to find out where the problem occurs. The wizard will then perform the following steps:

disassembling the device
inspection of parts
replacement of failed components
cleaning gadget parts from dirt and dust
high-quality and neat assembly of the model
final check of the device's functionality

Having completed all repair work, the YouDo performer will give recommendations for the safe operation of the gadget, which will help extend the life of the device and avoid repeated repairs in the near future. The wizard will also tell you about simple ways to troubleshoot minor problems.

Leave a request on this page or through the mobile application, describing your situation (for example: “iPad is not charging”) - specialists who are ready to take on your task in the shortest possible time will write to you.

We certainly don't MythBusters", but today we will try to dispel the myth that the tablet iPad won't charge on computer. If your iPad's battery is dead, then almost every user has probably tried two ways to charge the tablet:

Charging the iPad from a 220 Volt network using an adapter
Charging iPad from a computer using USB

I think that you did not have any problems with the first method. When you connect the device to a power outlet using the included USB cable and adapter, the iPad begins charging. The charging process is accompanied by a lightning icon that appears in the upper right corner.

If you do not have the original charger, then use USB cables and adapters with MFi certification -.

But sooner or later, any tablet user tries to charge the iPad using the USB interface of a computer or laptop. Having connected the tablet to the computer with a cable, the inscription appears in the upper right corner of the iPad - “ No charging" The user’s reaction at this moment can be completely different: someone runs to the store in panic, thinking that they sold him a defective or semi-working iPad, while someone is trying to find the answer on the Internet and is now reading this article.

If you are faced with a similar situation, then, of course, there is no need to run anywhere, everything is fine with your tablet. The fact is that the iPad tablet requires more energy to charge than, for example, the iPhone, so the iPad tablet is charged from the computer only when it is in lock mode (standby mode).

In order to make sure that the tablet charges when its screen is locked, we decided to conduct an experiment and, using the included cable, connected the iPad to various USB ports on the computer:

USB located on the motherboard itself, at the rear of the system unit
USB connector on the front side (/extension adapter)

In locked mode, the iPad was slow to charge in any of the USB ports. Therefore, if the iPad charging time is not important to you, then you can connect the tablet to the computer and slowly charge it, not forgetting to press the screen lock button (sleep mode). If the screen is unlocked and the USB does not have enough power, then iPad won't charge via USB.

For whom the charging time of the iPad is of great importance, use the included network adapter and a 220 V socket. The tablet charges from the socket the fastest.

We became the proud owner of an Apple tablet computer iPad. The first thing you did, after delight and a storm of emotions, you decided to recharge it from your home computer. And then you realize that the iPad is not charging from the computer.

Why won't my iPad charge from my computer?

Let's try to figure it out. This can happen for a number of reasons. First you need to understand whether it is even possible to charge an iPad from a desktop computer. The problem is that normal charging of the iPad requires a current of at least 1200 mA, but the computer's USB port can only output 500 mA. And the question arises, how to make it possible to charge the iPad from your home computer? Here are several options to solve the problem:

First you need to check all the ports on your laptop or computer. The motherboard may output slightly different amounts of current to different USB ports. Ports on a system unit are usually located on its front and rear panels, and on the sides of the laptop. If nothing has changed, don't panic. Even with such a low current, the iPad, although slowly, still charges, and even the “No charging” message next to the battery icon should not confuse you. It's charging, but so weakly that even the iPad doesn't understand it. You need to put the tablet into sleep mode, and it will begin to charge slowly but surely. However, this will be too long a process. In this mode, it will take about 23-25 hours to fully charge, and the desktop computer must remain turned on during this entire time and not go into sleep or standby mode. So, answering the question “does the iPad charge from a computer?”, we can confidently say: “Yes, but it’s too long and difficult.”

To ensure that charging your iPad does not cause problems, you can turn to its older iMac brothers (especially those released after 2011). All of these computers have powerful USB ports that can charge your tablet without any problems.
Buy yourself a brand new computer with motherboards from Asus and GIGABYTE. These motherboards will not only allow you to charge your iPad, but also reduce the time until it is fully charged by 2 times/

How can you charge your iPad from your computer without having to buy a new one? You can purchase a cable with a USB 2.0 adapter. With this cable there will be no problems associated with the inability to connect the iPad to the computer. It will also allow the tablet to receive 2 times more energy. One of the cable connectors needs to be connected to the iPad and the remaining 2 to your home computer.
You can also download special programs to your laptop or home computer that will increase the current in the USB ports. Ai Charger from Asus and GIGABYTE ON/OFF Charge you can download these programs from the official websites of these companies.

Perhaps the easiest way is to charge from a 220v outlet. Even if the iPad was purchased abroad and the charger is only suitable for European sockets, you can always buy an adapter, the price of which does not exceed 100 rubles.
And remember that if the iPad is completely dead, you may have to wait for 5 minutes for the charging icon to appear, and about 20 minutes for it to turn on. The time it takes to fully charge the battery varies depending on the iPad version.

iPad - charges in 3-4 hours;
iPad 2 - 5-6 hours;
iPad 3 - more than 6 hours;
iPad 4 - about 5 hours thanks to the new charger;
Try to always monitor your battery level. There have been cases when, after 1 month without recharging the iPad, there was not enough energy to even start charging the battery. All this will help you avoid problems with your new friend and charge your iPad from your computer.

If your iPad breaks down, the first reason why the tablet does not charge is that the power cable is damaged. - this is an operation available to specialists at the service center, since the tablet must be unstuck and the display with the motherboard removed. iPad batteries rarely fail.

As you know, the iPad can be charged either using a charger from the mains or from a personal computer via a connection to a USB port. However, having a right does not always mean the practical ability to realize it.

Users often ask why, when connecting an iPad to a laptop or desktop PC, a message appears indicating that the battery is not charging? Did the store really slip you an unusable tablet? Don’t rush to run to a phone shop and write a complaint. Most likely, the reason is in the personal computer itself from which you are trying to charge the iPad.

Why won't my iPad charge from my computer?

The thing is that during the charging process the device consumes quite a lot of power and not every personal computer is able to meet such high requirements.

If you have an Apple computer no older than 2011, you should not have problems charging your tablet computer. New Mac computers have a specially designed USB interface for connecting and charging iPads.

If you don't have a Mac, but a regular PC running the Windows operating system, standard USB connectors may not be powerful enough to charge your iPad.

Typically, the system unit has several USB outputs on the front or rear panel. All these interfaces can be of different types and, accordingly, can output different current strengths. Just try to find the most powerful USB connector. Perhaps during the experiments, the iPad will throw out a notification on one of the outputs that charging has started successfully.

To reduce the load, charge tablets only in sleep mode. To put it into sleep mode, you need to lock the tablet tap. If after this the device does not want to charge, you will have to look for more sophisticated ways to solve the problem.

In fact, it would be best to charge directly from the electrical network, connecting through a special adapter. It is advisable to resort to the mediation of a desktop computer or laptop only in cases where you do not have a special charger at hand or you are somewhere in a remote area. For example, let's go to the dacha. There is a laptop there, but my wife forgot to put the charger in her backpack. Or there is no electrical network at all and you need to recharge the iPad at least a little from the laptop battery.

Install a utility to increase the current on USB

Knowing about this user problem, many computer equipment manufacturers have developed special programs that allow you to increase the power of the energy flow via the USB interface to a level sufficient to properly charge the iPad.

These utilities are developed strictly for specific motherboards, and not only will not work with other hardware, but can also lead to serious damage to the equipment.

Therefore, find out exactly the brand of the motherboard installed on your PC or laptop and look for the recommended software on the manufacturer’s official website. It is quite possible that to enable the USB current amplifier you will have to make some additional settings in the BIOS. In this case, if you doubt your computer competence, it is better to invite a professional for such a responsible task.

The iCharger utility is designed for MSI laptops.
AiCharger is suitable for Asus laptops.
The ON/OFF Charge program is for GIGABITE laptops.

Tricks and Tricks

Is your favorite iPad not charging from your computer? It's time to get a little smarter. The USB interface has one such remarkable property - if you connect to two ports at the same time, the total energy output also doubles.

And here is a simple way to charge your iPad even from a desktop that is not suitable for this purpose. Purchase an adapter cable with two USBs on one end. Connect these two connectors to two inputs on the computer, and connect the remaining end to the tablet. Now the iPad will receive electricity simultaneously through two channels and this should be quite enough for the normal charging process.

Use only the USB cable included with your tablet to connect devices, as other types of interfaces may have reduced power and may not charge the battery effectively.
Charge the iPad only in sleep mode, otherwise the charging process will take a very long time - a day or even more.
If the tablet has not been recharged for a very long time, the battery energy level will be very low and then, even after connecting to the charger, it will take about twenty minutes until the charging notification appears on the screen.
The computer or laptop itself from which the iPad is charging should not be in sleep or standby mode.
It is advisable that the laptop is in charging mode. Otherwise, the system will limit the flow of current to the USB in order to protect the battery itself.
To charge the iPad, it is recommended to use, if possible, devices made by Apple - MacBook, MacBook Pro or Mac Mini. All of these machines are equipped with powerful USB ports specifically designed for charging iPads.

If you are the happy owner of an iPad, then sooner or later you will definitely be faced with the question of how to properly use and charge the battery on your tablet.

Let's try to figure out together how to prolong the work of your device's heart.

Battery usage rules

iPad battery - how to properly use and charge your iPad

In order to extend the battery life, you don’t need a lot of knowledge, you just need to follow a few simple rules:

Do not use or store iPad at temperatures below 0 or above +35 degrees. The optimal temperature for operating and storing the device is from 0 to 30 degrees.
Do not leave your iPad without a charge for a long period of time (1-2 weeks), otherwise it may not turn on.
Be sure to use your tablet, do not let it sit idle for a long time with a full charge, this way you can preserve the battery capacity.
Discharge and charge your iPad completely, at least once a month.
Charge your device properly.

These are the five basic rules that you should consider when using your tablet.

How to charge an iPad

The tablet can be charged using an adapter that connects to a 220 W outlet (usually included with the device) or from a computer via a USB cable.

Charge iPad via adapter. In this case, everything is simple, connect the iPad to the adapter, then plug it into a power outlet and wait for the device to be fully charged. This usually takes about 6 hours.

How to charge an iPad - charging an iPad using a 220W adapter

How to charge iPad from a computer. Everything is just as simple, but there is one “but”: you can charge the iPad via USB 2.0 only in standby mode (i.e., off) since the USB port does not have enough power. Charging using this method can take up to 12 hours, and your computer must be turned on.

How to charge iPad - charging iPad from computer

How to charge ipad correctly

According to Li-ion battery experts, it is better to charge the battery until it is completely discharged. The remaining charge can be like 10% , so 40% , but try not to allow a smaller discharge. My words can be confirmed by a message on the iPad at a time when the charge remains less than 20%.

I would like to draw your attention to the fact that there is a rumor that overcharging the battery has an extremely negative effect on its condition, but this is not entirely true. All well-known manufacturers have long been integrating a special circuit into the battery, which allows it to be protected from overcharging.

Also earlier, in metal hydride batteries, the effect was observed "memory" incomplete charging, but in current generation batteries this effect is very insignificant.

iPad battery capacity

On iPad 3 contains two batteries connected to each other with a common capacity 24.8 Wh., which is approximately 6,613 mAh. The operating time of a tablet with such a battery is approximately 10 hours.
On iPad 4 this capacity has been increased by almost 2 times and thus equal 42 Wh, which corresponds to 11,666 mAh. Despite the large battery capacity, its operating time is about 10 hours, and all due to the fact that the insides of the device consume much more energy.

How to save iPad battery power and extend its life?

Let's take a point-by-point look at how you can save battery power when using a tablet.

Display. This is the most voracious element that consumes the device’s charge the most. By using brightness settings you can reduce this consumption. The brighter the display, the greater the charge consumption; the dimmer, the less. Thus, your task is to adjust this parameter to suit your eye. To do this you need to go to “Settings” - “Brightness”. A slider will appear in front of you, by moving which you can change the value of this parameter.

Stay tuned for firmware updates. Try to update the firmware as a new version is released, as the company is constantly working to improve certain functions that in one way or another may affect charge consumption.

Turn off the 3G adapter. Turn off this adapter when you don’t need it at all or there is an alternative to wi-fi. It (3G) consumes too many resources.

Turn off the Wi-Fi adapter. This will allow you to save some of the charge. To turn off Wi-Fi, go to “Settings” - “Wi-Fi” and change the switch position to "Off" (“Off”)

Turn on Airplane Mode. If you are out of range 3G or Wi-Fi signals, then use the function "Air mode"– this will allow you to increase the savings in using your battery. Go to "Settings", in the left menu, the very first item in the list will be "Airplane mode", change the switch to "On" (“On”).

Turn off "Notifications". Over time, the iPad becomes overgrown with applications, some of them constantly sending some kind of notifications to your screen. By turning them off, you can extend the battery life of your iPad. Let's go to “Settings” - “Notifications” and turn off everything we don't need.

Disable Location Services. Pay attention to those programs that are constantly interested in your location. Disable some of them that do not need this function at all. Let's go to “Settings” - “Location services”.

Turn off Bluetooth. “Settings” - “General” - “Bluetooth” - “Off”.

Turn on auto-lock mode. Be sure to enable this mode. Set the values to the minimum interval of “2 minutes.” “Settings” – “General” – “Auto-Lock” – “Auto-Lock”. This way we will make the iPad turn itself off when we stop using it.

Turn off unnecessary sounds. For example, the sounds of the keyboard, turning the device on and off. Let's go to “Settings” - “General” - “Sounds” - “Sounds” and turn off everything unnecessary.

Turn off automatic mail checking and delete mailboxes you don't use. “Settings” – “Mail, Contacts, Calendars” – “Fetch New Data”, here we change the position "Push" on "Off" (“Off”) and set the boot option "Manual".

If you have questions, comments or additions, leave them in the comments.

Tricky question. How many hours does your iPad charge?