What is the tone mode of a mobile phone. What is tone mode on a landline phone?

Articles and Lifehacks

At the moment, there are two main options for dialing a number - pulse and tone. Many users wonder what is phone tone mode, and how it differs from the above pulse mode. Let's try to figure this out and also look at how to put our device into this mode. There is no need for this, since this mode has nothing to do with applications.

What is tone mode in a phone?

If the pulse mode is activated on our device (which appeared earlier than the tone mode), then in the process of entering a number we hear characteristic sounds similar to clicks. In contrast, a tone set is accompanied by sounds of varying pitches, which are more melodic.

The dial tone is an analog multi-frequency 2-tone signal that is used to dial a number. It is also often abbreviated DTMF. This mode is often used in answering machines (with manual input after voice prompts) and in automatic communication between devices.

So, we figured out what the phone's tone mode is. Now let's figure out how we can transfer our device into it.

How to put our phone into tone mode?

Typically, our device is switched to this mode by pressing a special switch (T/I) or the * symbol. However, there are exceptions, since some devices are translated differently.

If we use a landline phone, it depends on its model. For example, in Panasonic devices, conversion to DTMF can be done by pressing the following combination: “*#” without quotes. One way or another, the specific key combination can be clarified in the instructions for the phone.

Let us add that you can reduce the dialing time from your home device by not only removing it, but also programming it in a certain way. To do this, you need to use the instructions for the device. As a rule, programming results in the fact that when you press a certain key, the device itself dials the card PIN code and the specified access number.

If we are talking about a cellular device, it is usually not necessary to switch it to this mode, since it is already in tone mode by default. However, if this is required, for example, by an answering machine when calling support numbers, it is recommended that you read the instructions, or use the “*” symbol without quotes.

The mobile device can also be programmed. We ourselves can set speed dial buttons, using a single key to call a specific subscriber. When you click on it, dialing starts. You can set multiple speed dial keys at the same time.

If you have landed on this page, then you probably need to get an answer to the question, how to install tone dialing on a mobile phone? First let's figure out what this function is "tone dialing" and why it is needed. Any cell phone user sooner or later has a situation when it is necessary:

obtain information on a specific operation from the service provider (operator);

call the bank's hotline;

order a ringtone for a call.

In these and many other cases, dialing in tone mode is required. Mobile devices for cellular communications are equipped with two modes - tonal and pulse. Pulse dialing is already outdated and practically not used. Its essence lies in the number of presses on the button: one press - number 1, two presses - number 2, and so on.

On modern mobile phones, tone mode is installed by default, and pulse mode is not available at all, since it is slower and more inconvenient than tone mode.

How to enable touch tone on your phone

It was already said above that on modern devices the tone mode is set by default, but in phones with a touch screen the keyboard does not always light up. In addition, the operator may ask the interlocutor to switch the phone to the desired mode, which means that the setting was not saved in the phone.

Therefore, the user needs to know how to display the keyboard on the mobile phone screen. When you press the call button and hear a dial tone, press the soft key, which will turn on the on-screen keyboard. After that, press * or +, that’s it – the DTMF mode is active.

The owner of a touch phone should pay attention to the options available during the call. Sometimes the transition to tone mode is carried out through them. During a conversation or listening to information, press the number entry item and enter the desired combination of buttons.

This combination must be indicated in the instructions for the device. If these recommendations do not help put the device into tone mode, it means that it is infected with a virus or there are problems with the firmware. In this case, the owner needs to contact the service center.

Master's answer:

Any number on the phone can be dialed in one of two modes: pulse or tone. Pulse dialing is typical for landline telephones with a rotary dial, while tone dialing is used in modern telephone models.

The default settings for your landline phone are Pulse mode.

How to put your phone into tone mode?

It can be identified by the characteristic crackling sound in the handset while typing. At the same time, when dialing the number 1, you can hear one crackling sound in the handset, when dialing the number 2, two, etc. When dialing by tone, a beep is heard while pressing.

When contacting a service where during a conversation you need to press certain keys on the telephone to get to the corresponding menu item, a device with pulse dialing will not work. To turn on the tone mode one-time, you must press “*” and the required key. The tone mode will be disabled during the subsequent call to the autoinformer.

Any device can be switched from pulse mode to tone mode (read the instructions for your phone model). For example, Siemens Gigaset telephones can be switched to tone mode using the following combination: press the call button, then call the function by dialing “10”. In the menu that appears, press the “1” button.

If you have, for example, a Voxtel landline telephone, you can switch it to tone mode in the following way: by selecting the “programming” button, press the combination “*-2-2”. When the signal sounds, press “*”, then the “programming” button. In DEXT-based devices there is a key for switching dialing modes.

Modern models of Panasonic telephones have a switch on the base (it is located on the side). To switch the device to tone dialing mode, you need to move the switch to the “tone” position. If the model is outdated, you need to go to the telephone menu, select “call programming” and select “Tone key dialing mode” from the list. However, it should be noted that such an item may not be on the menu. In this case, for clarification, please refer to the instructions for this telephone set.

In ordinary city telephones, there are two types of dialing: the so-called pulse, known since the days of rotary telephones, and tone.

Currently, it is generally accepted that pulse dialing (when the number of pulses and interruptions corresponds to a particular dialed digit of a number) is a relic of the past. Nowadays, tone dialing (in which a number is dialed using special tone messages) is increasingly used.

We switch the phone to touch-tone dialing mode - definition and two simple methods

However, quite often telephone exchanges do not support tone dialing.

Instructions for switching your phone from tone mode to pulse mode

Some phone models do not natively support touch tone mode. For example, rotary telephones are designed only for pulse dialing. If you have a similar device, you can safely use its functions.

Almost all modern telephones have a dialing mode switch. It usually represents a moving slider switch. It also always has a “Pulse/Tone” switch, which corresponds to pulse and tone modes. Turn the switch to the “Pulse” position. So, your phone has changed its dialing mode.

If your phone model does not have this switch, then the “*” (“asterisk”) key present on the numeric keypad of your telephone will perform a similar function of switching modes. Pressing again will return the phone to its previous dialing mode.

Sometimes, after changing the mode, you need to lower the handset onto the lever and lift it again. That is, during a conversation, switching the device from one mode to another is almost impossible on some phone models.

If you have a DECT phone (that is, a phone that has a wireless handset), then the settings for dialing modes are contained in the settings of the “base” to which the handset is “attached”. Access to the settings is possible directly from the handset of the telephone, or from the control buttons on the “base”.

Read the instructions for your telephone. It will certainly contain information about setting up the device, including switching to tone or pulse dialing mode. You can also find instructions on the manufacturer's website or sites created to help users.

How to put your phone into tone mode, what is it? Switching to tone mode on your phone

Often, when contacting support or calling a hotline, the subscriber is urged to switch to touch-tone dialing. As a rule, this happens when trying to call a multi-channel number, which requires pressing numbers on the handset of the phone to confirm the choice. It’s not difficult even for a beginner to understand such nuances.

What is tone mode on a phone?

Telephone communication is a complex thing, but at the same time incredibly interesting. For this reason, before switching the phone to tone mode, it is worth understanding its essence and considering what other dialing options are available. Telecommunication technologies are moving far ahead every year, and even now modern devices only support the tone type. For devices released earlier, you still have to switch between two:

pulse, which involves closing the telephone line in a special way, where each dialed digit corresponds to the number of pulses.
tone, using an analog signal to dial the required combination of numbers.

A user who does not understand the intricacies of this topic will be able to distinguish these methods of entering numbers by ear. Remember the old rotary phones: when you scrolled the disk, you heard some clicks that differed depending on the number. Some devices released even 10-15 years ago still have the ability to switch to pulse mode. Another input method will give itself away as a difference in the signal height, which will depend on the key pressed. The advantage of tone digital input over pulse input lies primarily in the speed of dialing and connecting with the subscriber.

Touch tone on a landline phone

With the passage of time and the development of internal telephone networks, the abandonment of outdated pulse dialing looks quite logical. Multifunctional office phones, similar to those produced by Avaya, do not even have the ability to change modes. This is understandable, since in large companies work is constantly in full swing, and the speed of dialing to a client or partner is important.

Home devices will make you worry about how to enable tone mode on your phone. For example, the list of characteristics of the wired model of a Panasonic device states that both options are available. In some cases, pressing buttons is not enough to switch between them, and you should contact your communications service company for help. It is a mistake to believe that absolutely all radio telephones, unlike wired telephones, have only tone dialing. Voxtel Select series devices support both methods of transmitting a telephone number.

Tone mode on a mobile phone

It is more profitable to make calls to long-distance hotlines, where you have to listen to an answering machine for a long time, from a mobile phone. Most devices are equipped with only one input method, so the question of how to switch a cell phone to tone mode does not arise. To switch to the extension line of the desired operator, you will need to press keys with certain numbers, which is only possible with the tone option.

A person dialing a call center number will hear a characteristic signal, indicating that communication has been established with the selected operator.

There has never been a pulse connection on mobile phones, since this is a feature of telephone networks for landline devices, and the modernization of Russian telephone exchanges has made it possible to abandon this option forever. However, it may not be necessary to switch between input methods, but to enable the desired type of connection that was disabled for some reason. Without activating this function, some devices will not allow you to dial a number.

How to put a mobile phone into tone mode

If we answer this question in general and in relation to each gadget, but there is only one answer - nothing! By default, all phones support and operate in tone mode and do not provide any other selection options. However, there are exceptions to the rules: you cannot transfer to another set, but you can simply turn off the existing tone set.

This instruction explains how to switch to tone mode on a mobile phone with touch controls:

Dial the phone number.

Once the connection is established, bring up the on-screen keyboard.

Press the star or plus key. For different gadget models, you may need to hold these buttons for a while.

This algorithm will also be effective for owners of push-button phone models. Here the situation is even somewhat simpler: you don’t need to open the keyboard on the screen.

How to enable tone dialing on your phone?

Having reached the dialed number and heard a request to turn on tone input, which was probably turned off, you only need to press and hold one of the keys (usually “star”, “pound” or “plus”) until a characteristic signal.

Switching a landline phone to tone mode

The internal structure of home communication devices, like telephone lines, determines the choice of mode change method. In most cases, this can be done without leaving the apartment or private house. How to put your phone into tone mode in the classic way is described in the following instructions:

Pick up the phone if you have a corded one, or press the call key on your radiotelephone.

Hold the star button for a second.

Try pressing the number keys: if they make sounds that are different in tone, then everything is done correctly.

Another option is suitable only for some models:

Inspect the tube from all sides for the location of additional levers on it.

If you notice a switch with the Latin letters P and T, meaning pulse and tone dialing, then move the lever to the T position.

You can check by pressing the number buttons.

Video: Tone mode

Technologies

What is dial tone on a landline phone?

Landline (wired, home) telephones for their intended purpose are now used less and less, giving way to radio-based mobile devices. Since the latter, in most tariffs, does not require a monthly subscription fee, the cost of using them is even lower than that of their stationary counterparts. At first glance, it may seem that no problems can arise when using wired phones, since the technology is old and well-studied. But this is true for the developer, and not for the average user of such a phone.

For example, sometimes companies and banking institutions indicate a toll-free telephone number in their contact information, by calling which many issues can be resolved. Usually, an answering machine on the other side of the line picks up the phone, asking the subscriber to press certain numbers (turn the dial) during the conversation. Unfortunately, for many, the call ends here, since the answering machine does not react in any way to actions on the phone, ignoring button presses. Why?

The reason is simple - there is a pulse and tone mode of the phone. Surely, everyone has heard strange clicks or beeps that accompany pressing numbers or dialing a number using a dial. The beeps are tone mode and the clicks are pulse mode. Let's look at how dialing occurs in old rotary phones.

When the dial is rotated to the required distance and automatically returns to its original position, special electrical contacts are closed: each closure forms a click-pulse; by counting their number, you can determine the digit being dialed and, accordingly, the number. This “counting” is carried out by the equipment at the station (ATS). Simple and effective. In newer phone models, the contacts are replaced with a special pulse generator, which, by the way, can also be switched to tone mode.

Subsequently, pulse dialing was replaced by a more technologically advanced tonal (tone) dialing. In it, dialing is carried out not by digits, but by modulating alternating current with the desired frequency. Each number (button) has its own signal tone. Then everything is the same: the PBX perceives a combination of tones and converts them into a dialed telephone number. The tone mode is more noise-resistant (errors in dialing are now entirely dependent on the attentiveness of the owner, and not on the state of the network), and also allows you to connect with the subscriber more quickly. All modern phones are tone phones; they may not have a pulse mode at all.

By the way, it is believed that the tone mode provides higher sound quality.

How to put your phone into tone mode

This is only half true. To work in tone mode, both the telephone and the PBX must support it. Trying to use a new phone on a pulse PBX will not give any advantages (if, at all, the device works). Stations designed for tone mode are digital (or mixed), as opposed to analog pulse. Hence the improvement in sound.

A programmable pulse generator allows you to switch the phone to tone mode and operate both pulse and tone communication networks. Let's assume that the subscriber is served by an analogue telephone exchange. To put your phone into pulse dialing mode, you usually need to press and hold the “*” (asterisk) button for a few seconds. If this does not help, then turn the device over and examine the bottom cover - often there is a small toggle switch for selecting a mode. Switching to tone dialing is performed in the same way.

Now let's return to the example given at the beginning of the article. Owners of rotary telephones connected to analog stations may forget about communicating with an answering machine that requires pressing any buttons, since this is impossible without additional equipment. Of course, there is a way out - this is a special set-top box that generates tone signals into the network, but you will have to forget about convenience.

Technologies
CDMA phones - what are they? CDMA mobile and landline phones

If we decipher the full abbreviation of these four letters (CDMA) in detail, we will get the following words - Code Division Multiple Access. And even when we decipher this meaning, translating it into a language we understand, m...

Law
What is the visa regime? Ukraine, Russia - visa regime 2014

Today there are quite a lot of people who one way or another need to face crossing the border, so they have to apply for a visa. It should be noted that some people don’t even know about such a thing as a “visa”...

Arts and entertainment
What is tonality in music? The key of the song. Major, minor

Before analyzing a particular musical composition, the performer first of all pays attention to the tonality and key signs. After all, not only the correct reading of notes, but also the holistic nature of the piece depends on this...

Computers
What is TTY in a mobile phone?

Some phone users, delving into the settings, come across an incomprehensible abbreviation TTY or the phrase “Teletype mode”. Also, the status bar of the smartphone may contain a characteristic symbol...

Computers
What is Windows 7 Safe Mode?

A user of a Microsoft operating system who does not know what Windows 7 safe mode is can be called lucky. This software solution turned out to be so effective that it lasted...

Computers
What is “sleep mode”, what are the differences?

Modern computers are equipped with a huge number of functions that are not always fully understood by the typical Windows OS user. One of these options, which at first glance does not raise any special questions...

beauty
What is foundation for dry skin?

Foundation is an indispensable part of the cosmetic arsenal of any woman who tries to choose the best cream to look flawless. But when buying the most expensive products, we don’t always pay attention...

Technologies
What is HDR in a phone camera? High Dynamic Range - expanding the dynamic range of a digital image

The desire of smartphone manufacturers to make their products more attractive to buyers has led to the fact that it is now quite difficult to find a device that does not have a built-in digital camera. Des...

Technologies
What is DFU mode? iPad: how to activate DFU mode?

If you have had any problems with the software on your iPad, or needed to erase all information from the device, you know what updating and restoring are. In the same case...

Technologies
What is a flexible screen? Advantages of a flexible screen phone

The appearance of a modern mobile phone is firmly “stuck” in the minds of most people. If we are asked to imagine a modern device, we will probably see something like the latest models...

If you have landed on this page, then you probably need to get an answer to the question, how to install tone dialing on a mobile phone?

How to turn your phone into tone mode

First let's figure out what this function is "tone dialing" and why it is needed. Any cell phone user sooner or later has a situation when it is necessary:

obtain information on a specific operation from the service provider (operator);

call the bank's hotline;

order a ringtone for a call.

On modern mobile phones, tone mode is installed by default, and pulse mode is not available at all, since it is slower and more inconvenient than tone mode.

How to enable touch tone on your phone

Articles and Lifehacks

We often hear a proposal to switch the device to this mode by calling, for example, the support number. Unfortunately, many users do not know what is tone mode in a phone and why it is needed. Let's try to figure this out, and also dwell on how you can switch your device to this mode.

What is tone mode on a phone? Its implementation in the Russian Federation

Let's start with the fact that there are two telephone dialing modes - pulse and tone. The first of them, pulse, has already become outdated and is therefore rarely used. This is especially true for landline phones, since the mobile device is already set to tone mode by default.

The pulse mode appeared first. It was typed like this: one click, number 1, two clicks, number 2, and so on. Subsequently, the tonal mode appeared. Its advantages include the fact that it is faster than the pulse mode. If we use it, it is much more convenient and faster for us to dial phone numbers, use various services, etc. Please note that numerous operator services are supported only in this case.

So, now more about what tone mode is in a phone. Essentially, it is a 2-tone analog multi-frequency signal that is used to dial a number. In English it sounds like dual-tone multi-frequency, and therefore we can often come across the abbreviation DTMF. The tone signal is used when manually dialing when working with interactive services (for example, with voice prompts), or during telephone signaling between devices in automatic mode. In this case, the signal and telephony correspond to each other.

This regime has existed since the 60s of the last century, but it was introduced in the Russian Federation only in the 80s. Until now, many of the domestic telephone exchanges perceive only pulse signals. Thus, tone dialing is only possible where a digital signal is already used. Sometimes it is even provided as a paid service. In any case, it is not required.

How to switch a cell phone to tone mode?

By default, this mode is already activated on our mobile device. However, if we need to translate it, we should know how. In particular, this applies to devices with touch screens, although there are known cases of problems when converting ordinary push-button phones to DTMF.
Immediately after the connection on the touch device has started, we should press a special soft key, which will give us access to the keyboard. Next, enter the sign + or *, or any combination of these buttons. After this, DTMF mode will be activated.

It is also recommended to pay attention to the menu that is available to the owner of the touch device during the call process. Often the transfer to the desired mode is carried out through it. Right during the conversation, select the item to enter a telephone number, and in the dialing menu that appears, enter the appropriate key combination to activate DTMF. You can find it using the instructions for the device.
If we use a regular push-button telephone, right during the call we press and hold * or +.

Note that all modern mobile devices are switched to tone mode by default. However, if such a translation is required from us by an answering machine or a support specialist, it is obvious that this setting has been previously changed. This applies not only to mobile devices, but also to home devices.

If our cell phone does not allow us to enter data from the keyboard during a conversation, it is recommended to contact a service center. Problems may also be related to the firmware or the presence of viruses.

There are times when a subscriber calls various services or a hotline and hears an answering machine offer that advises switching your phone to tone mode. But not all users are aware of how to complete this process. The article will provide useful information to those people who do not know how to switch the phone to tone mode.

Dialing modes

The main modes of telephone dialing are divided into pulse and tone. These systems are the fruit of the development of communication. An earlier form of telephone operation is the pulse mode. Dialing a number with it is carried out by interrupting the line with a certain list of sounds. Any subscriber will probably remember his calls from a regular phone to another city via a long-distance line. Tone mode is a more recent invention and appeared relatively recently. Its main difference from pulse is that each number has a pre-selected sound. You should pay attention to the fact that all modern telephone models are produced taking into account the use of this feature. The pulse mode for such models is a thing of the past. But, despite this innovative approach, phones with classic capabilities are still popular to this day. Therefore, if you need to switch to tone mode, you should clarify whether the menu of your device allows it.

Examination

To find out whether the required function is enabled, pick up the phone and press any key. You must determine what kind of sounds are coming from your device. If you hear short beeps, this indicates that your phone has switched to the tone mode system. If you can recognize sounds similar to clicks, then the device undoubtedly operates in pulse mode. The latter option limits a number of functions. We will discuss further how to switch the phone to the tone mode we need.

Process

Press the “*” button on your device - this is the easiest way to switch your device to tone mode. This method is only effective if the menu provides a similar function. Not every phone model involves simply pressing a button. Hold and do not release the “*” or “#” key for several seconds. The word "tone" or "t" should appear on your phone's display. If the display shows absolutely nothing, then you should again listen to the sounds made by the handset while pressing the buttons. Some models are equipped with special “T” or “P” keys, which are located on the body. They were created to convert a radiotelephone from pulse mode to tone mode.

There are other custom steps for this customization. They are typical for some models. The switching method can be a combination of buttons “*” and “-” or “-”, “*”, “-”.

Nothing fit

If none of the methods proposed above for switching to the tone mode of the phone works, then it is recommended that you turn to a detailed study of the menu of your device. Many models can be translated using it. Enter the settings and refer to the option “Switch between modes”. Select the method of operation you need and confirm your action.

We have dealt with the concept of tone mode, but finally we should talk a little more about pulse mode. First of all, telephones with a rotary dialer work this way. Pulse mode is a dialing method in which digits are transmitted to the station by step-by-step closing and then opening the selected telephone line.

What is dial tone on a landline phone?

The reason is simple - there is a pulse and tone mode of the phone. Surely, everyone has heard strange clicks or beeps that accompany pressing numbers or dialing a number using a dial. Beeps are tone mode, and clicks are pulse mode. Let's look at how dialing occurs in old rotary phones.

By the way, it is believed that the tone mode provides higher sound quality. This is only half true. To work in tone mode, both the telephone and the PBX must support it. Trying to use a new phone on a pulse PBX will not give any advantages (if, at all, the device works). Stations designed for tone mode are digital (or mixed), as opposed to analog pulse. Hence the improvement in sound.

Do you know how to put your phone into tone mode?

Many of us at least sometimes have to call multi-line phones to various hotlines. It’s easier to do this from a mobile phone, but sometimes more expensive, because the operator begins to read money from the beginning of the connection. First, you listen to an answering machine message that asks you to choose which specialist to connect with, and then in some cases you will have to spend more than one minute on the line waiting for the operator to respond. In this case, it is more profitable to use a stationary device, but in this case you need to decide how to switch the phone to tone mode.

Phone operating modes

There are two options for telephone operation - pulse and tone. A conversation on a multi-channel number is possible if you enable tone mode. Older phones and PBXs support pulse dialing by default. Modern digital PBXs and more advanced telephone models are tone-on-tone. You can determine how your phone is configured by default by holding the handset to your ear and listening to the sounds it makes as you dial a number:

On a phone set to pulse mode by default, you will hear characteristic clicks, the number of which corresponds to the dialed digit.
In tone mode, a characteristic sound signal will be heard in the speaker.

If you heard the sounds described in the first case, to call the hotline you need to find out how to switch the phone to tone mode. However, it is worth noting that owners of rotary phones will not be able to do this without purchasing additional equipment.

How to find instructions for your telephone

First of all, when we need to learn a new function of something, we turn to the instructions. It comes complete with any equipment. In it you can find a lot of very useful tips, including how to switch your phone to tone mode. If the user manual is lost along with the box or was not there initially, you should use the tips offered later in our article.

The easiest way to put your phone into tone mode

Sometimes, for objective reasons, it is impossible to find a user manual, or it may contain only a technical description of the model, and the functions are described very poorly. In this case, use a simple and proven method of switching to tone mode.

Once you have dialed the number and are connected to the answering machine, press and hold the star (*) for a couple of seconds. Usually this is enough to immediately switch to the required mode. If the transition does not work, then you should try again. If the transition procedure is successful, you can enter any extension numbers. However, you will need to go through this procedure every time you call.

Panasonic phone tone mode and its features

Panasonic specialists thought about introducing tone mode in their devices before other companies. It is no secret that its spread everywhere remains only a matter of time; an increasing number of PBXs are using digital technologies, and organizations are creating multi-channel numbers for convenience. Before you put your Panasonic phone into tone mode, examine the device carefully. On some models you may see a "tone" key or a "pulse-tone" switch. The switch must be set to “tone” mode, and the key just needs to be pressed.

Modern radiotelephones of this brand are programmed by default for tone dialing mode, and most often there is no need to enter additional settings. If the program is broken, then using the instructions it is easy to fix it.

What does it mean to put the phone in tone mode?

Previously, on landline phones, and even now there are 2 dialing modes: pulse and tone

first the pulse mode appeared, this is 1 click number 1 2 clicks number 2 etc etc...

then later tone dialing mode appeared; it is faster than pulse dialing; in tone mode it is much faster to dial numbers and various telephone operator services are supported only in tone dialing; in pulse dialing they are not supported

If you have a landline telephone, there are usually 2 dialing modes: tone and pulse

Many old telephone exchanges and telephone networks do not support tone mode, only pulse mode. Even 10 years ago, settlement and village telephone exchanges did not support it.

those. this is already a thing of the past, converting from pulse dialing to tone

for example, if a subscriber has an PBX connected to the station in pulse dialing mode, then in tone dialing he will not be able to dial the number and vice versa

Sad Roger

Regular dialing is pulse dialing. It has remained since the times of disk machines, when each digit corresponded to its own number of pulses.

Modern devices no longer have disks, but they remain compatible with older networks, that is, by default they also send impulses when dialing, rather than tones. To switch to tone mode (to, for example, select menu options for various services, call using cards, etc.), you must either slide a special switch, if any, or dial an asterisk *.

In the west, there is no longer pulse dialing; there, numbers are dialed immediately in tone mode. When each digit corresponds to a signal from two specific frequencies.

Mikhail Belodedov

Pulse dialing of a telephone number is the first thing that came to replace “young ladies on the switchboard” in telecommunications. The dialer disk, rotating (reverse), briefly breaks the telephone line several times. One gap - number 1, two - number 2, etc. Simply and easily. A minimum of complex technology. Accordingly, automatic telephone exchanges are needed that decipher these short-term interruptions and establish the necessary connection. These PBXs have become very widespread - these are decade-step PBXs. The main disadvantage of pulse dialing is its significant duration.

With the development of electronics, tone (or tonal) dialing entered the arena. No line breaks. A special signal is transmitted over the line, which the telephone exchange interprets as a digit of a telephone number. A pair of non-multiple frequencies is used as a signal - hence the name Dual Tone Multi-Frequensy (DTMF). There are 8 such frequencies in total - two sets of 4. They are the ones heard in the handset when dialing a number. Modern PBXs use tone dialing as the main mode - because it is much faster. However, the opportunity to use the old, pulse dialing is almost always left so that you can use old telephone sets. On modern devices, as a rule, both dialing modes are provided and a special switch is made - either physical or software.

Matvey628

Until recently, absolutely all telephones were analog, that is, dialing was done by sequential dialing of numbers using a rotating dial. However, with the advent of the first digital switches and telephones, dialing numbers in the form of analog signals lost all meaning.

However, the huge number of analog telephones did not allow a quick transition to the new format. Therefore, most digital telephones had a function for switching from one mode to another. Tone mode was intended specifically for digital devices and switches and was distinguished in that the digits of the number differed not in the number of clicks when dialing, but in the pitch of the tone, individual for each digit. This is exactly what is meant when it is said that you need a telephone switch to tone mode.

Tone mode is usually needed to connect to an internal number without operator assistance. Most often, to change the tone mode, you need to press “*”, after which you can enter the subscriber’s internal number.

How to put your phone into tone mode?

Captain obvious

If the phone is equipped with two dialing systems - tone and pulse, and at the same time operates in pulse mode by default, there are two options for switching modes. One of them is mechanical, with a microswitch on the phone body marked T and I.

The second option is simpler - just press the button with the asterisk sign while the handset is off-hook.

There are also phone models in which dialing modes are switched through the phone menu - here you will have to read the instructions for this phone model.

Matvey628

The question, for many young people, does not make sense at all, since they have only dealt with mobile phones in which this mode is installed by default.

As for older people, they still remember analog phones that had a rotating dial for dialing. Digital phones that appeared later had two dialing modes: traditional and tonal. During tone dialing, sounds of different pitches are heard, each of which corresponds to one digit. To put your landline phone into tone mode you need to either press the asterisk * or set the tone switch to "tone" mode. The mode switch is usually located on the back of the telephone, where the wire connects.

Zolotynka

Most corded telephones, as well as many older models, actually switch to tone mode using a slider, which is usually located on the bottom of the telephone or on its back wall. This function is designated Tone / T and Pulse / P. Move the slider to the T position and the phone will work in tone mode.

Not everything is so simple with new phone models. The desired function may be “hidden” somewhere in the phone menu, and in order to use it and switch the phone to tone mode, you should carefully study the instructions. For different models, the settings may differ significantly.

Pistolet

By default, the tone mode is already installed on the phone. It all depends on the phone’s firmware; there are a lot of touch-tone and simple ones. During the conversation - this is when the connection has already started, press * (asterisk) and just wait for the mode to change. This action is suitable for almost all telephones.

Dolfanika

Some early models of mobile phones still offer the option to switch the phone to tone mode. Other mobile devices are already set to tone mode.

if you need to change the mode yourself, then press the asterisk and hold it.

D e m k a

You can switch on the phone body using special buttons, but usually just holding down the asterisk is enough. But I always had to do this through the phone settings, in the “sounds” tab - everything is simple and clear there, just check/uncheck or select the desired mode and that’s it. Therefore, there is nothing complicated about it, the main thing is to choose the most suitable and convenient method for yourself.

Hunter nickname

The phone has two modes - tone and pulse. In pulse mode, when you press the buttons, clicks will be heard. If tone mode is selected on your phone, short beeps will be heard when pressed. Most phones have an easy way to change from one mode to another. You just need to unlock the phone and hold the star until the mode changes.

First you need to determine in what mode the phone operates, tone or pulse.

If clicks are heard after pressing the button, then the mode is pulse; if short signals are heard, then the mode is tone.

Press the button on your phone * " (asterisk) - this method of switching to tone mode is suitable for most devices.

Afanasy44

At work, to put the phone into tone mode, just press the * button, below it and the inscription is in English tone.

And on a home telephone, there is a key on the back of the device to switch to tone mode.

Chipmunk

I have to make a lot of calls during the day. And very often, to reach operators through the answering machine menu. you have to put the phone into tone mode. To do this, I usually click on the button with an asterisk - *

To put your home phone into tone mode When the handset is off-hook, you need to press the star. In some phone models you need to translate through the menu. There is no need to switch your mobile phone - it is already in tone mode.

How to put your phone into tone mode. Phikips phone number. I pressed "*" and nothing comes out.

Pavel Ronzhin

Instructions
1

Determine what mode your device operates in, tone or pulse. To do this, listen to the sounds your phone makes when dialing a number. If you hear clicks after pressing a number, it means the mode is pulsed, and if there are short tones, then it’s a tone mode.
2

Having determined the operating mode of the device, switch the phone from pulse mode to tone mode using one of the three methods described below.
3

Press the “*” button on your telephone - this is the easiest way to switch the device to tone mode, provided that your phone is switched in this way.
4

Find the “P” and “T” buttons on your phone; they can be on the side of the device or at the bottom. If there are such buttons, it means that the phone is switched to tone mode with their help. Press the "T" button to switch to the desired mode.
5

If both methods do not work for your phone, please refer to the instructions included with the device. Some models of devices are switched to tone mode using completely different keys.