Menu
homeBios

We make Beeline Smart BOX Pro - candy! (we sew on Padavan). Smart Box from Beeline

Surely many users are interested in how to reflash a router. However, first of all, it is worth noting that this task is not so simple (although quite feasible) and requires certain knowledge and skills. Unskilled user actions can lead to malfunctions of the router, up to its complete failure.

When it is needed

The need to reflash the router can be caused by several reasons, among the most basic are the following:

  • Firmware update required. Manufacturers often give users this opportunity, which increases the stability of the Internet connection and adds new functions.
  • If the selected Internet provider is not supported by the device or is not supported correctly, then the situation can be corrected by flashing it.
  • If the router is unstable or too slow.

A few general rules

It should be remembered that before you reflash the router, you need to make sure that there are no problems with the power supply. A sudden power outage during the flashing process itself can lead to device failure.

In addition, you need to remember that you cannot reflash any router via a Wi-Fi wireless network. This can only be done by connecting the router to the computer.

You need to download update files either from trusted resources or from the official websites of manufacturers.

You also need to remember that before you reflash the router, you need to remove the WAN cable (provider cable) from the socket.

You also need to find out the current firmware version. Usually it is indicated on the device itself, on a paper label. You should find an inscription like: Ver 2.0. The numbers will indicate the current firmware version. It is recommended to roll back to a previous version only if absolutely necessary.

Following these simple rules will allow you to perform flashing quickly and painlessly, and will also save you from unnecessary headaches as a result of an unsuccessful operation.

Flashing a TP-Link router

This router model is quite well known on the market and is widespread, and therefore it is not surprising that many users are often interested in how to reflash a TP-Link router.

The procedure here will be as follows:

  • First you need to download the file with the firmware and place it in any folder convenient for use;
  • then you need to turn on the router and connect it to the PC via an Ethernet network cable;
  • Next, you need to open any available browser and type the IP address in its address bar: 192.168.1.1; if this address is not working, then you can try: 192.168.0.1 - it should work;
  • When prompted to enter authorization parameters, you must enter the login and password in the appropriate fields: admin and admin;
  • The standard settings window will open, where you will need to go to the System Tools tab and select Firmware Upgrade;
  • at the top of the window you need to find the File item, you can type the local address of the location of the downloaded firmware file manually, but the easiest way is to just click on the “Browse” button and in the dialog box that opens, specify the already unpacked firmware file;
  • Next you will need to click on the Upgrade button and OK;
  • All you have to do is wait until the download and firmware status bar is filled to 100%, and then the router will either reboot itself, or this will need to be done manually.

Attention! All settings of the router will be reset to factory settings, and therefore before you reflash the TP-Link router, you need to either remember or write down all the settings on a separate sheet. If previously installed software allowed, you can save the configuration file in advance.

Reflashing the Dir router

First of all, it is important to know that routers of this model, revisions B1, B2, B3, are incompatible with routers of revisions B4, B5, B6 and B7. Therefore, you cannot download the firmware version intended for B1, B2, B3, and use them on B4, B5, B6 and B7 routers, or vice versa. Failure to comply with this rule will result in device failure.

The D-Link Dir router is a somewhat older model, and therefore the need to change its firmware can be caused by many objective reasons.

And, quite naturally, many owners of this device will be interested in how to reflash the Dir router. However, the flashing process in this case will not be fundamentally different from changing the firmware of other router models:

  1. First, you will need to download and unzip the firmware file. When unzipped it should have
  2. Turn on the router itself and connect it to the computer using the help from the provider (this must be removed).
  3. Next, in the browser you need to type: 192.168.1.1 or 192.168.0.1.
  4. After this, the router will offer to save your password and login for security. They are standard for these cases: admin and admin.
  5. In the settings window that opens, select the “System” tab and then select the “Software Update” item.
  6. At the next stage, you need to click on the “Browse” on-screen button, specify the downloaded firmware file and click on the OK button.

If everything is done correctly, then after the reboot an updated interface window will appear indicating the current firmware version.

Updating your D-Link router

As for how to reflash a D-Link router, the algorithm of actions here will be similar: download the firmware file, connect the router to the computer, enter the above address numbers in the browser.

Then you will need to click on the “Advanced settings” on-screen button in the settings window to gain access to the necessary “System” and “Software Update” items.

Further actions will be similar to those described above - click on the “Browse” button and specify the downloaded firmware file, then click on OK and wait until the installation process is completed.

The last step in flashing will also be to reboot the router.

If everything is frozen

It is possible that those who are puzzled by the question of how to reflash the Dir 300 router from D-Link will encounter during the flashing process that the browser or the router itself is frozen. However, you shouldn’t be afraid of this, it’s just that during the installation of updates, the router loses connection with the computer for a while, but restores it itself. The interruption time may vary, it depends both on the speed of the computer itself and on the router, but on average it takes no more than one or two minutes.

Of course, if the interruption continues for too long, it is possible that there are serious problems or this update version is incompatible with the router model. You can try to force a reboot of the router and perform the installation again, first making sure that the correct firmware version is being installed.

Under no circumstances should you turn off or unplug the router from the outlet at this time!

Reflash Asus router

Asus routers are also common in the network equipment market and also require systematic software updates. Therefore, anyone who is interested in how to reflash an Asus router needs to follow these steps:

  • connect the router to the computer using an Ethernet cable;
  • enter in the address bar: 192.168.1.1 or 192.168.0.1;
  • specify the required login and password;
  • Now you first need to return to the factory settings, to do this you will need to go through the following items: “Additional settings” - “Administration” - “Save/Load/Restore settings”;
  • here you need to first make a backup copy of the existing settings and only then perform a factory reset;
  • then you will need to go back to the browser settings window and go through the following points: “Additional settings” - “Administration” - “Firmware update”;
  • indicate the downloaded firmware file;
  • After installing the new file, you will need to go to the settings page for the third time and reset them to factory settings again.

Reflashing the Kyivstar router

There is nothing special about how to reflash a Kyivstar router. After all, this operator uses TP-Link router models, the flashing of which has already been discussed above. However, there are some features and nuances that should be taken into account:

  1. To get to the settings window, you need to enter not just numbers in the browser, but: 192.168.1.1/userRpm/SoftwareUpgradeRpm.htm.
  2. As a login and password, you need to enter the combination: kyivstar and kyivstar.

Other actions are similar to those for updating TP-Link routers.

Reflashing routers from Beeline

But those who are interested in how to reflash a Beeline router can breathe a sigh of relief - flashing their device is also no different from the software update process for everyone else: the same local IP in the address bar and the same familiar connection “admin - admin” " To get to the window indicating the firmware file, you will first need to click on the “Advanced settings” on-screen button, then click “Other”.

In the window that opens, you first need to click on the “Select file” button, and after selecting it, click on “Perform update”. After rebooting, the router will be updated.

You must also remember: when trying to carry out a custom flashing so that routers from Kyivstar or Beeline work with other operators, the subscriber automatically loses the warranty on the device.

As a result of these manipulations, the stability of the device may increase, and some new functions may be added. And yet, before you reflash the router, you need to clearly understand the entire procedure. If you are not confident in your own abilities, it is better to contact a service workshop.

The Beeline company has existed in the cellular services market for a very long time, providing its customers with high-quality communications, different services, prices are different, some are quite budgetary, which indicates that they do not profit from customers, there are promotions and bonuses. Recently, the company began producing high-quality equipment and one of these creations is a router: Smart box one- excellent Beeline router!

Firstly, the most important thing that a modern person needs is to keep up with the times and the price, in this case you won’t go broke with a smart router, because the prices are very cheap, especially if you take the all-in-one tariff for it, the cheapest is 600 rubles . per month, includes: mobile payment (including Internet), and the most suitable for active users is “all in one 5” 2500 (and this is payment for 5 numbers, television and Internet!), and secondly, the quality of communication. This is exactly what the Beeline smart box is needed for.

Connection. You need to connect the cable installed by specialists into the apartment to the Wi-Fi WAN port, and the computer to the LAN port. It’s even possible wirelessly, but if you’re a beginner and don’t know how or aren’t sure, it’s better to use the regular method.

Related articles:

Setting up Wi-Fi - on a Beeline router

  1. Connect the computer network cable to any port of the router. (there are 4 of them, called LAN) And the cable that was brought into the apartment is connected to the WAN port in the same router.
  2. Open the browser and enter: 192.168.1.1. If you entered everything correctly, you will be greeted with a welcome message, then click continue.
  3. Enter login - username and password. To make it easier, you can enter, without inventing your own, in the first and second fields of bilain. Continue button.
  4. Select "Quick setup".
  5. The most difficult part begins, but almost everyone copes, and if not, Beeline operators will be happy to help:

You find yourself in the “home Internet” section, enter any number or letter in the “login” and “password” fields just like that.

In the “Wi-Fi network of the router” section, you configure the wireless network.

  • If the network frequency is 2.4 GHz: enter a name in the Network name field (everyone will see it, including you), this will be the name of the Beeline router from now on, then enter a password of at least 8 characters.
  • If the network frequency is 5 GHz: enter the Network name, for example, ali_wifi70G and create a password.
  • “Guest Wi-Fi network” - setting up a wireless network (optional).
  • – if television is connected, then you need to select the router port from the TV. Next, “save”.
  • Wait about a minute for it to set up. Great, setting up the Beeline smart box one router is complete!

Where to buy a smart box router?

Smart boxes can be purchased at any electrical supply store or at Beeline stores. Its cost is 2500 rubles. To be sure of the quality of the product, this brand and product, you can watch video reviews, most of them are on YouTube. There is also a Beeline smart box one forum, whose participants share problems, help solve them, in conclusion, no one has yet canceled customer reviews, here , which will truly help you understand the product.

Reviews about “wi-fi router Beeline smart box one”

Nikolay from Tver: (as you can see, Beeline is a very large company and offers its services in almost all cities of Russia) “advantages: compact, lightweight, pleasant to look at. Disadvantages: none);

Natalya from Kaluga: “+ price, design, reliability, lack of bright light indication, the seller is a friendly woman, as far as it’s concerned, it’s not an easy setup for other providers. They connected, but after 4 months the Internet began to fail - “the connection was broken.” Some kind of magic you reboot, it works for about 15 minutes, and then again. Beeline operators suggested flashing it, but it didn’t work, I had to call specialists, and lo and behold, it worked!”;

Arthur from Khabarovsk:“advantages: Two wifi bands, good wifi speed, does not freeze, compactness, not a strong indicator light, many inputs.

Flaws: Unfortunately, it is blocked only for Beeline; you cannot connect other telecom operators. But when you go into the router settings using SuperUser and the password, series - router number - all functions can be unlocked and you get an excellent router that works with any provider.

A comment: Great model. It has been working for a couple of months in two wifi bands. No freezes, great.”

From all that has been said above, we can conclude: it’s up to you to decide whether you need a Beeline smart box one router or not, but the Beeline company is not involved in fooling around, its products are of high quality, the staff is pleasant, the prices will always pleasantly surprise the buyer, promotions are always available, and if If you do something wrong in the connection or other problems arise, the operator will definitely explain in detail for free, and if this does not help, specialists will help.

Setting up a smart box router

In contact with

During the operation of the Smart-Box router, users need to reconfigure the equipment, which requires entering an individual login and password. But what to do if the router password is irretrievably forgotten or lost and cannot be recovered?

In this case, you can unlock the Beeline Smart-Box router by resetting the settings and then entering your credentials and password, among other things.

What to do if you forgot the password for the Smart-Box router?

To unlock the Smart Box router if the password is lost or forgotten, you need to change it. With the current settings, it is no longer possible to change the password. You need to perform a factory reset and then enter the required data following the recommendations below.

  1. Check that the computer's network cable is connected to one of the LAN ports located on the device.
  2. The cable that is routed into the apartment must be connected to the “WAN” port.
  3. Press the “Reset” button located on the router body.
  4. On your computer, open your existing Internet browser and enter the following combination in the address bar - 192.168.1.1. The welcome page for managing your wi-fi router will open. Click on the “Continue” button on the screen.
  5. On the “Start over” page that opens, you must enter the standard login and password. Enter the word admin in both lines and click Continue.
  6. In the menu that appears, select the section “Quick setup”.
  7. Here you need to fill out several subsections described below.

In the "Home Internet" field, enter your new username and password. Other Beeline home Internet settings are already embedded in the device’s memory and do not require adjustment.

In the “Wi-Fi network of the router” subsection, you need to come up with the name of your home wireless network and a password to access it (at least 8 characters).

“Guest Wi-Fi network” has similar characteristics to a home network; here you also need to enter a name and come up with a password.

In the “Beeline TV” field you need to select a port to connect the set-top box. This option is relevant if, in addition to home Internet, you also use Beeline television. You only need to fill out this subsection when connecting a TV cable to the Smart-Box router. Select the number of the port to which the cable going to the set-top box is connected.

After completing all the necessary settings, click “Save”.

Saving the settings will take some time, usually about 1 minute.

Having made an Internet connection, the router will start working, and the message “Internet connected” will appear on the screen.

Reset Beeline Smart Box router


In order to reset the router, you need to find the "Reset" button on the side where the cable connection ports are located. It must be pressed using a match or a toothpick (do not use sharp objects such as a needle, you may damage the button). The button must be pressed for 10-15 seconds until the indicators on the front side of the device blink. After this, the router will boot with standard settings and will be completely ready for configuration according to the instructions above.

Don’t forget to write down your new login and password so that in the future you can quickly make the necessary changes to the settings without resetting the router!


Video: Instructions for setting up a Smart Box router

Greetings, friends.
There is probably no person who has not heard about the Beeline company and their Internet of the same name. Like any “serious” provider, Beeline really likes to install branded routers.

The advantages are obvious: ease of setup and operation, as well as user support - the hardware is the same and possible problems have been known for a long time. And the castrated settings, tailored for the majority, do not allow the user’s playful hands to break everything.
This article will look at one of the most popular, widespread and overall good router Beeline SmartBox.
As expected in such cases 🙂, it is an OEM device. True, these are not typical repainted DLinks, but exotic ones from SERCOMM)
Read about disassembling the firmware and interesting findings below.

A little about the device:

In fact, the router is a slightly modified Realtek_RTL8197D reference.
You can see more about it below
Brand name: Beeline SmartBox.
Chip: Realtek 8197D (600 MHz)
RAM: 64 MB
WiFi: 802.11b/g/n 300Mbps, 2 internal antennas: 2x2 MIMO
Interfaces: 5 RJ-45 connectors with auto-detection of cable type, USB 2.0 port

From software features: DLNA, FTP-server, SAMBA-server (connecting USB devices as a network drive), which makes it an interesting option for creating a simple home media center.
In general, the device is not bad and worked stably for me, giving the maximum tariff over Wi-Fi.

However, as an enthusiast I lacked freedom, SSH and the ability to dig deeper inside, as well as the ability to fine-tune. That’s why I started looking for alternative firmware for the “smart box” and soon realized that there are none and there won’t be any in the near future...
Well, the situation is unpleasant, but not hopeless. 🙂
Since there are no alternatives, you need to get the most out of the stock one, if possible getting a normal console and raising the privileges to root. And to do this you need to merge and unpack the stock firmware.

Let's get started:

Attention. The following points were made under a Linux system and I do not guarantee that you will be able to repeat all this under a Win-like OS.

During preparation we used: Debian Lenny, binwalk, squashfs-tools, a little ingenuity and red eyes.

1) I download the latest firmware from here
wget http://static.beeline.ru/upload/images/help/devices/routers/SmartBox/SmartBox2019.zip
2) Unpacking 7zip, I discover img a file of incomprehensible, at first glance, content.
7z x SmartBox2019.zip
3) Launch by passing as an argument img shnik, to which he cheerfully reports about Secomm's signatures and even tells us hardware id, but that’s not the main thing. Inside we find a pinched binary ( bin-file), unpack the archive and get

Binwalk output

S1000_Smart_box_SERCOMM_BEELINE_2019.bin which once again emphasizes the SERCOMM origin of the device :)

4) Here it is, it would seem that happiness is nearby. But it was not there.
The binary file itself does not provide any human-readable information ( binary, cap).

And this is where the anal carnival begins:
We target it again and among the signatures, bootloader and garbage we find squashfs' official image (Briefly: Read-only file system, widely used in compressing *nix boot images).


Happiness is close, I thought. All that remains is to unpack...

Merging from the repository squashfs-tools containing everything necessary for unpacking and anticipating... I'm breaking off, unsquashfs speaks

Filesystem uses lzma compression, this is unsupported by this version

Filesystem uses lzma compression , this is unsupported by this version

What does it mean that the file has been compressed in the most insidious way? lzma and he cannot unpack it.
Hmm, I'm looking at Github for the latest version. squashfs-tools, I collect from source codes and... I break off again.
Scratching the turnips and combing makefile I notice that support lzma disabled by default. I change the parameter and... pay attention to the comment that for LZMA required LZMA SDK.