Creating a new console. MMS Management Console Step-by-Step Guide To Create a Taskbar

The thirty-year history of video games has given humanity an incredible amount of strong emotions. Video games draw people into their own world, allowing them to escape from problems in real life, let off steam, solve a complex puzzle, or chat with friends. A wonderful invention.

1. Make an all-in-one console from Raspberry Pi

The Raspberry Pi is a dream for retro gamers. A simple yet incredibly convenient device that allows you to emulate all PlayStation games for the Game Boy. Using the RetroPie software, a microSD card and a USB adapter, you can create your own RetroPie system in your laptop. And here are the instructions for use.

2. Turn a Raspberry Pi into a Game Boy

If you really want to create a real retro gaming project, you should try integrating a Raspberry Pi into a real Game Boy. You'll have to find some of the electronics yourself and find a 3D printer somewhere. But the game is worth the candle, the result is on video:

3. Turn Raspberry Pi into NES Classic

For those who haven't been able to get their hands on an NES Classic, or simply want to go the more complicated route than just buying on eBay, there are a few options. Howchoo has detailed instructions on how to install a Raspberry Pi emulator into an original NES cartridge.

4. Build an arcade machine

If you want more, there's always the option of creating your own arcade machine and teleporting yourself back to the eighties. The guide contains instructions for modifying an old cabinet and control panel into a real gaming masterpiece.

5. Fill the slot machine with “life”

To understand the electronics inside the slot machine you need this video guide. In this case, Arguino Uno is used to run the emulator. You will also have to deal with speaker systems, lighting and controllers.

6. Build a compact slot machine

If the space in your room or apartment does not allow you to collect bulky toys, you can get by with a compact version of a retro gaming machine. This life hack will allow you to assemble a miniature project called Porta Pi on the Raspberry Pi platform.

7. Integrate the retro console into the controller

The gaming consoles of yesteryear are very different from today's electronics. This means that the old-school system can be built into a small space. Using the Arduino-based MAKERbuino system, you can take advantage of the open source Gamebuino platform and create something very cool, like a personal Game Boy.

8. Slot machine on the coffee table

Imagine a slot machine on a coffee table. Yes, this is possible. To run the emulation program, you can use a standard PC or Raspberry Pi system. .

9. Retro console inside the original console

Many people have outdated consoles in their closet or closet. Some can be upgraded to modern audio and video standards. Once again, the Raspberry Pi comes to the rescue, allowing you to create your own minicomputer.

10. Turn your PC into a retro emulator

The Raspberry Pi is a powerful system for emulating games, but some games need more power than the Pi's processor. You can build your own custom PC based on Linux OS. By the way, computer hardware can be built into any slot machine and you will get a very casual, exclusive gadget.

11. Use an old TV for a retro console

Older CRT TVs have plenty of room for a Raspberry Pi. Representatives of the Element14 community told us how to install the Pi into a TV and correctly connect the video image to the controller. Link to detailed instructions here.

12. Build a mechanical version of Donkey Kong

You won't be able to play the mechanical version of Donkey Kong yourself. But if you manage to assemble a project with your own hands, there is a reason to be proud. The step-by-step instructions describe all the stages of creation, but you can improvise a little, right?

Hello everyone, today I want to talk about mmc (Microsoft Management Console), since many system administrators not only don’t know about it, but even if they do, they don’t even understand how mmc provides wide functionality and time savings, for example, when I was just getting acquainted with operating systems Windows, in many books examples were given that technical support or the HR department had mmc consoles specially prepared for them, which contained all the things they needed in order to take the load off the system administrator as much as possible. Let's create your own Mega console.

We will consider creating mmc, or as I also call it, a mega powerful console, on Windows Server 2012 R2.

Pros mmc

• no need to have many shortcuts on the desktop or in the quick access menu in the start
• the ability to manage other servers remotely from one place, unless of course
• free as a built-in Windows utility
• flexible customization exactly to your needs

Types of mmc launch

There are two types of snap-in launch:

• Author - this is a mode where you can add and change the contents of the snap-in
• User is a mode when there is already a management snap-in and you cannot change anything in it, for example Computer Management, and a bunch of such

Launch mmc

When you launch the Microsoft Management Console, it will open by default in author mode, which implies editing, but if you wish, you can then prevent changes to your console. Press Win+R and enter mmc.

As a result, you will see a window like this:

Adding snap-ins

The mmc console allows you to add the necessary snap-ins through the File-Add menu or by pressing CTRL+M

In my example I will add the following things:

• Active Directory - Users and Computers (most used snap-in)
• Active Directory - Domains and Trust
• Active Directory - Sites and Services
• Hyper-V Manager
• Enterprise PKI
• Event Viewer
• ADSI Editing
• Services
• Group Policy Management

Select the one you need and click the add button.

The selected console will appear on the right side

If you click the change extensions button, you will be able to fine-tune the mmc windows console. For example, some of them include additional extensions. We see that Computer Management consists of more than 10 extensions; if necessary, you can disable the ones you don’t need.

mmc windows console also allows you to add some snap-ins that will apply to other computers, for example, event viewer that will show logs from another computer

Click review and add the one you need.

As a result, we got such a tool.

Customizing the appearance of mmc

In order to make your mega console more convenient, I suggest expanding the central area and getting rid of the area of ​​effect. To do this, click View-Customize.

and uncheck the action bar.

You can also add additional commands to turn your equipment into a really cool thing. We see that in Services there is only Stop or restart, let's expand this functionality.

Select action - new taskbar view

The Panel View Creation Wizard will open.

We choose a vertical view, although you may like another one, everything is at your discretion.

apply to all elements

Set a name if the old one does not suit you

The New Task Wizard will now open.

You have three options to choose from

• Menu command - standard command
• Operating system command - script
• Jump Command

On the left side select services, and on the right the desired command.

For example, I chose to connect to another computer.

Set a shortcut for it

In order to add more commands to mmc, open Action-Edit taskbar view

Task tab - create

In the end I got it like this

Here you can add more to your imagination and you can create good functionality.

We'll talk about the rest in the second part of MMC or mega powerful console part 2.

Many gadget lovers began their exploration of the world of electronics with game consoles and consoles. These were not the modern Xbox and PlayStation at all, but Nintendo/Dendy And Sega with pixel graphics, hardcore difficulty and no saving of game progress.

To remember old feelings, play through games you didn’t play as a child, or simply show your children games from 25 years ago, you can install console emulators on your computer.

You'll have to tinker with the settings of different systems, dance with a tambourine to make gamepads work, and play on a small laptop screen. And the quality of the emulation will be so-so.

Much easier build a small gaming station yourself, which supports more 50 emulators old consoles. Connect the device to a large TV and play using any available gamepads.

1. Buy everything you need to assemble a retro console

• single board computer Raspberry Pi– from 2588 rub.
• microSD memory card 8 GB or more – from 254 rub.
• HDMI cable – from 66 rub.
• gaming gamepads USB or Bluetooth – from 200 rubles.
• you can buy a separate stylish case for 1,517 rubles.

Of course, much of this can already be found in the bins of any gadget lover. For those who will buy missing goods, I will give some advice.

Buy the latest model (Pi 3 B+), it has a more powerful quad-core processor that can even run 3D games from the first generation PlayStation, 1 GB of RAM, Wi-Fi and Bluetooth.

Such a box will not have to be connected to the network via wire or bother with “USB whistles”, and gamepads can be connected both via wire and Bluetooth. It’s better to get a computer with a case and a suitable power supply right away.

It is preferable to buy game controllers from trusted brands. If you have old Xbox or PlayStation remotes, they will work great, or you can take replicas of the original input devices from Sony or Microsoft.

You should not take radio joysticks or completely unknown gamepads, they may simply not connect to our console.

2. Select the operating system on which the set-top box will run

After selecting the components, you should decide on the operating system of the future console. At the moment, there are three good assemblies that are suitable for our task:

Lakka– assembly with a beautiful visual interface in the style of PlayStation. The project is developing rather slowly, Lakka still has many glitches and shortcomings.
‎
RecalBox– a more advanced all-in-one solution. After installation, the image will already contain a couple of dozen classic games for different platforms. In addition, a media center is integrated into the image KODI. In a couple of clicks, you can turn your gaming console into a media processor for playing video from a removable drive, from the Internet or network storage. It is possible to set up IPTV.

RetroPie– another multifunctional emulator of old game consoles. Initially, the image does not include games and there is no media player like KODI, however, it is possible to install RetroPie on top of the native operating system for Raspberry - Raspbian. This means that the gaming service can work on Malinka simultaneously with other services, for example, with, which connects smart gadgets in the house.

The choice is between the last two options. RecalBox– a simple image with games out of the box and the KODI media center, and RetroPie for those who want to tinker and install a system on top of Raspbian.

3. Install the operating system on the game console

Installation of the gaming system on an already running Raspbian is done through the terminal. We’ll leave this for the future; now we’ll try the option for beginners. All the emulators described above are installed in the same way.

First, I recommend trying it RecalBox. It has the most intuitive and user-friendly interface, the setup is extremely simple, most of the features are included out of the box, and as a bonus we get a media center KODI, which can easily replace a budget TV set-top box for watching movies from a flash drive, over a network or online.

1. Download the selected image from the developer’s website.

2. Download and install the Etcher application to write an image to a memory card.

3. We write the image to the memory card.

4. After finishing recording, install the memory card in the Raspberry and connect it to the TV.

During the first launch, the system will be installed and the initial configuration will take place. Nothing is required from the user, we just wait a few minutes before the visual shell starts.

The system will immediately prompt you to configure the joystick. This can be either a USB accessory or a wireless one. It is better to have a keyboard at hand to make all the settings in case of problems connecting the gamepad.

4. Setting up the set-top box

Of course, the main thing is to teach Raspberry to work with a suitable gamepad. Wired models almost always start out of the box; wireless models connected right away. Dualshock 3, the rest had to be manually configured from the system parameters.

You can connect up to five gamepads, I think this is unnecessary, because most old games were designed for 1-4 players.

The key settings you need to do are:

1. Switch the interface to Russian. Main Menu (Enter on the keyboard) – System settings – Language. Initially, the key is used to confirm actions "A".

2. Connect to your home Wi-Fi network for easy downloading of games. Main menu – Network setup activate item Enable Wi-Fi, enter your home network name and password.

3. Configure the web interface. After connecting to the network, remember the IP address and enter it in the browser on your computer.

The system comes pre-installed with several games for different consoles, but many supported systems do not appear in the menu. Don't worry, those consoles for which no games are downloaded are hidden. Just drop the relevant data into the desired folder and the console will appear in the main menu.

The remaining parameters can be configured as desired.

5. We put on the games, and then you understand

All that remains is to find the images of the games. You will figure this out on your own. Data can be downloaded from well-known sites or special portals, of course, for informational purposes.

We copy files via the web interface to the Raspberry, reboot the system or update the list of games through the settings and plunge into a sea of ​​nostalgic feelings.

Microsoft Management Console (MMC) is often used by system administrators to create highly customized administration products. With the help of MMC, you can ease the daily tasks assigned to the shoulders of system administrators. All tools that are in the MMC are displayed as consoles. Creating tools in this console is one of the easiest tasks.

You will need

• MMC software.

Instructions

Microsoft Management Console (MMC) allows system administrators to create highly flexible user interfaces and customize administrative tools. This step-by-step guide describes some of its new features.

On this page

Introduction

MMS unifies and simplifies everyday system management tasks. The tools it contains are displayed as consoles. Consoles, consisting of one or more applications, are built from modules called snap-ins. Snap-ins may also include additional extensions. MMC is a central part of Microsoft's management strategy and is included with Microsoft Windows® 2000. In addition, Microsoft development teams will use MMC to further manage applications.

The MMC management console allows system administrators to create special tools for delegating specific administrative tasks to users or groups. Along with the operating system, Microsoft provides standard tools for the day-to-day administrative tasks that users need to perform. These tools are part of the overall local profile All Users and are located in the folder Administration on the menu Start. Saved as MMC console (.msc) files, they can be sent by email, shared on a network folder, or posted on the Internet. They can also be assigned to users, groups or computers through system policy settings. Such tools can be customized to perform a wide range of actions, fully integrated into the operating system, and repackaged.

Using MMC, system administrators can create unique consoles for workers who report to them or for team leaders. They can apply these tools to system policy, transmit them via e-mail, or publish them publicly on the Internet. When the workgroup manager opens the msc file, access will be limited to only those tools provided by the system administrator.

Creating your own tools with a standard MMC user interface is a simple process. Start with an existing console and modify or add components to achieve the look you want, or create a completely new console. The following example shows how to create a new console and place its administrative components in a separate window.

Prerequisites and requirements

No strings attached: You don't need to study any other walkthroughs other than this one. You need one computer running Windows 2000 Professional or Windows 2000 Server. For the latest information on hardware requirements and compatibility for servers, clients, and peripherals, see the Hardware and Software Compatibility Checks page on the Windows 2000 website.

Creating Consoles

The easiest way for administrators to use MMC is to launch an existing console file from the Start menu. However, to get an idea of ​​the flexibility of MMC, it is useful to create a console file from an existing sample. This is also useful when using the create new tasks feature in this version of MMC.

Creating a new console file

1. On the menu Start select item Execute, type the command in the text window MMS and press OK. The MMC will launch with a blank console (or administrative tool) as shown in Figure 1 below. An empty console has no functionality until some equipment is added to it. The MMC menu commands in the menu bar at the top of the MMC Management Console window apply to the entire console.

1. In Console1, click menu Console and select Add or remove a snap-in. The Add/Remove Snap-in dialog box opens. In it you enable extensions and specify snap-ins that will be displayed in the console file. You can define which snap-ins should be inserted in the Added snap-ins drop-down list. Use the default node as an example Console root.
2. Click Add. A dialog box will appear Adding an isolated snap-in, containing a list of snap-ins installed on your computer.
3. In the list of snap-ins, double-click Computer management, to open computer management wizard.
4. Select Local computer and check the box next to " Allowed to change the computer selected for management when launched from the command line».
5. Click Ready. This will bring you back into the conversation Adding/removing snap-ins. Click Close.
6. Select a bookmark Extensions, as shown in Figure 2 below. If the checkbox " Add all extensions" is checked, all locally installed extensions are used. If this check box is not checked, you can specify any snap-in extensions that will be explicitly loaded when the console file is opened on another computer.

1. Click OK to close the Add/Remove snap-ins dialog. The Console Root window now contains the snap-in Computer control, associated with the Console Root folder.

Configuring the display of snap-ins in the console: new windows

After adding the snap-in, you can add windows to the console to create different viewing combinations.

To add a window:

1. In the left pane of the tree-like list shown in Figure 3 below, click + next to the item Computer management. Select Utilities.

1. Right click a category Event Viewer and select New window from here. As shown below in Figure 4, a new Event Viewer window will open, associated with the corresponding Computer Management extension.

1. Open a menu item Window and select Console root.
2. In the Console Root window, select Services and applications, right click Services in the left panel and click New window. As shown in Figure 5, a new Services window will open, linked to the corresponding Computer Management extension. In the new window, click the button on the toolbar (indicated by a red circle in Figure 5) to hide the tree-like list on the left.

1. Close the original window displaying the Console Root.
2. On the menu Window select item Top down. The console should display both windows shown in Figures 4 and 5, one below the other.
3. Now you can save your new MMC console. Select an item Save as in the Console menu, and give your console a name. Now your console is saved as an msc file, and you can share it with anyone who needs these tools to customize their computer.

Note: Each of the two subwindows has a toolbar with buttons and drop-down menus. These buttons and menus apply only to the window in which they are located. You can see how the buttons and menus change depending on the snap-in selected in the left pane of the window. By accessing the menu View, You will be able to see a list of available panels.

Advice: Windows look better if you have your screen resolution set to maximum and your fonts are small.

Creating console taskbars

If you are creating a console file for another user, it may be helpful to provide a simplified view where only a few tasks are available. Console taskbars will help you with this.

To create a taskbar:

1. On the menu Window select New window. Close the other two windows (You will save a new console file at the end of this procedure). Expand the remaining window to full screen.
2. In the left pane, click + next to the folder Computer management, then click + next to the folder Utilities. Expand the folder in the same way Event Viewer, select the item in it System and right-click on it, selecting New view of the taskbar.
3. Follow all steps of the wizard, accepting the default values. Make sure the checkbox on the last page is checked to New Task Wizard could start automatically.
4. In the New New Installation Task Wizard, select the default installation task until you reach the page shown in Figure 6 - on it specify List in details window in the drop-down list and select Properties:

1. Click Further and accept the default settings on the remaining pages. When choosing Events and click on Properties You will see the properties page for this Event. After you clicked Ready On the last page of the wizard, your console should look like Figure 7:

1. Click the button Hide/show the console tree on the toolbar.
2. From the View menu, select Tune and uncheck all options except Description Area to hide all panel types.

The next section describes how to lock a console file so that the user can only view it and not modify it. At this point, your console should look like Figure 8:

Figure 8: Modified console view

Configuring Console File Options

If you are creating a console for another user, it is useful to prevent him from making further changes to the console file. This can be done in Console Options.

To set console file options:

1. On the menu Console select item Options.
2. Change the console mode from the drop-down menu by selecting Custom – limited access, single window. In this mode, the user will not be able to add new snap-ins to the console file or rearrange windows.
3. In the same window you can change the name of the console file. Click OK, to continue.
4. Save console file. The changes will not take effect until the console file is reopened.

This is just one example of how the MMC Management Console allows you to combine information and functionality that previously required opening the Control Panel and two separate administrative utilities. MMC's modular architecture makes it easy for network developers to create application snap-ins that enhance the functionality of the platform while reducing the burden on administrators.

Additional Information

To find the latest information about the Windows 2000 network operating system, visit the Windows 2000 site and the Microsoft Windows NT Forum on the Microsoft Web site. For information about installing and using Windows 2000, see Windows 2000 Professional and Windows 2000 Server Help.