Software for increasing the rotation speed of the cooler. Automatic adjustment of cooler speed to reduce noise

Typically, middle-class laptops have only one cooler, which is responsible for cooling the entire system. For this reason, its rotation speed will affect the performance of not only the processor, as is the case in desktop computers, but also the entire system, including the video card, RAM and hard drive.

Automatic setup

Correctly configured drivers in the operating system will allow you to both increase the speed of the cooler on a laptop during its maximum load, and reduce it when working in the system itself or in undemanding applications. This will not only provide extra battery life due to lower power consumption, but will also extend the life of the cooler.

Manual adjustment of laptop cooler

The question of how to increase the speed of the cooler on a laptop manually may arise for several reasons. One of them is incorrect driver settings in the operating system. This happens to users after reinstalling it themselves. Quite often, similar questions arise for people using new versions of Windows, where the system and drivers have not yet been optimized for all equipment. Also, a problem with the rotation speed may appear when the gadget has not been disassembled for cleaning for a long time. It is worth switching to manual adjustment of the cooler only if the solution does not lie in the options described above.

Required Software

Since it is not possible to increase the speed of the cooler on a laptop using standard means, first you will need to download the necessary software. First of all, it includes the SpeedFan application, which will regulate the number of revolutions of the blades per minute. You will also need to download one of the programs to view the temperature levels of various computer components. This could be Everest or any application with less functionality. On the laptop itself, you must have an operating system from Microsoft of any edition installed, on which the above programs will be launched.

Computer diagnostics

Increasing the speed of the cooler on a laptop will not always be the best option in terms of performance and noise. To avoid wasting additional time, you should first conduct a small diagnostic of the equipment.

To determine the temperature of each computer element, you must use one of the pre-installed programs. All necessary measurements can be performed using Everest by finding the corresponding indicators for each of the elements. If they are outside the norm and this is not related to drivers or excessive contamination of the laptop, it is worth starting to adjust the rotation of the cooler. It makes sense to set the maximum speed in the summer, when the room temperature is equal to or exceeds the thermometer mark of 30 degrees, or when overclocking equipment.

Changing speed using SpeedFan

If you need to increase the speed of the cooler on your laptop, SpeedFan is one of the most versatile options. The application, which regulates the speed of all coolers installed in the system, is distributed absolutely free of charge, has a convenient interface without advertising and is fully Russified. After installing the program, the main menu will display the cooling systems found on the user’s equipment. Their maximum number is limited to six. On many laptop models, switching the rotation speed of the blades will occur immediately after confirming the actions without rebooting the device.

How to increase the speed of the cooler on an HP Pavilion G6 laptop

For the HP Pavilion G6 line of laptops, there is an optimal option that will provide both a high degree of cooling of computer components and low noise levels. On the manufacturer's official website, in the drivers section, every owner of Hewlett-Packard equipment will be able to find the Power manager application for automatically adjusting the power supplied to the cooler and other elements. To do this, you will need to be on the main page of the site, hover your mouse over the “Support” item located in the top horizontal menu, and select “Download drivers” from the drop-down list. Next, the HP website will offer several options for determining the laptop model. The first is automatic, allowing you to download a special application that independently recognizes the laptop.

The second is manual, where the user will personally select the required category and register the model for selecting drivers. After this, the download page for all software for the selected device will be available.

Increasing turnover using BIOS

Before increasing the speed of the cooler on a laptop through the BIOS, it is worth determining the need for this process, since the consequences can be not only in the form of excessive noise, but also premature battery discharge. For this reason, on many laptop computers this function is simply cut out of the basic I/O system.

Manually adjusting the rotation speed can be useful for geeks who want to start overclocking their own equipment. Although this is not very popular on laptops, some models still have quite a good amount of power.

When starting overclocking, the first thing you need to do is increase the speed of the cooler on your laptop. You will need to learn how to configure it through the BIOS from the instructions included with the laptop. If a manual for making changes is not included in the kit, information can be found on the official website of the laptop developer. In general terms, the setup is reduced to several steps. First, you need to press the appropriate button before booting the system (depending on the motherboard manufacturer) and go to the main menu of the basic I/O system. Next, you will need to find the power section, where the menu with cooler settings will be located. Save changes before exiting BIOS, and the required speed will be selected permanently.

When answering the question of how to increase the speed of the cooler on a laptop, we must not forget about regular cleaning. This is the best way to increase the efficiency of cooling and rotation of the blades due to the fact that the bearings will not be hampered by contamination in the form of dust or something more serious.

Of course, not every user will find the necessary tools, time and patience to clean equipment. Therefore, if there is a clear drop in computer performance, it is recommended to contact a service center, even if the free service period of one or two years has already expired.

As a rule, only one cooler is installed in standard middle-class laptops. This is not always enough for the laptop to work comfortably, especially if you spend a lot of time playing games. Cooling plays a rather important role, since the performance of the laptop as a whole depends on it. It is because of this that many users ask the question: “How to increase the speed of the cooler on a laptop?” There are many ways. Let's look at them.

Automatic change of cooler settings

If you have installed the official drivers provided by the manufacturer and configured them correctly, then the increase in the speed of the cooler will depend on its load. That is, under heavy loads it will automatically increase speed. This way you can increase battery life and reduce your impact on cooling.

Manually changing settings

How to increase the speed of the cooler on a laptop? Of course, automatic cooler tuning may not always work. This happens for various reasons. The most common is incorrect driver settings. This can be easily fixed by reinstalling them. Next, you will need to configure them according to the instructions. There may also be other problems. You may have started working on the newest version of Windows, and there is no suitable software for it yet. Manufacturers do not always keep up with new products. Remember that the cooler needs to be cleaned periodically, as this can also lead to poor performance of the laptop. If you were unable to configure the drivers correctly and you think that the problem is different, then you should proceed to manually configuring the cooler.

Support programs

How to increase the speed of the cooler on a laptop? So, if the drivers provided by the manufacturer do not help, then you need to install additional programs. The most common software that allows you to increase the speed of a cooler is SpeedFan. If you want to regulate the operation of the cooler yourself, you should also install a program (preferably Everest) that allows you to monitor the temperature of the laptop components. This software is suitable for any Windows operating system.

Laptop diagnostics

If you decide to independently regulate the speed of the cooler, then you need to monitor all elements of the computer. As we have already found out, this can be done using the Everest program. You should not set a higher speed if the computer is not heavily loaded, as this takes a lot of resources and noise will interfere with comfortable work.

But you need to go to the program. If it shows that the temperature is normal, then no changes need to be made. Otherwise, you need to gradually change the speed of the cooler and monitor all indicators. Of course, if the computer starts to get very hot, then you need to check the laptop components and clean it of dust. Higher speeds must be set before launching games and during the summer.

How to work with the SpeedFan program?

How to increase the fan speed on a laptop? Install the SpeefFan software. This is a free program that has complete Russification. This software allows you to change both the speed of each cooler separately and all of them in a complex manner. How to do it? Let's launch the program. She will offer to select the necessary computer elements. Then you can start making changes. After making changes to the operation of the cooler, you can begin to continue working on the laptop. You do not need to restart your computer to make changes.

How to increase the speed of the cooler on an HP laptop?

For HP laptops, software has been developed that allows you to automatically change the cooling speed. How to increase the speed of the cooler on a laptop? We go to the official website and go to the “Download drivers” tab. After this, you need to find your computer. This can be done in several ways. Enter the name yourself or use the automatic laptop model recognition option. After this, you should select your operating system and find the Power manager drivers. Next, you need to download this application, install it and restart your computer for the changes to take effect.

Changing the cooler speed on other laptops

How to increase the speed of the cooler on a Samsung, Acer, Asus laptop? Just as in the previous case, you need to go to the manufacturer’s website and install the appropriate drivers. So the cooler rotation speed will change automatically, depending on the computer load. If you decide to change the operation of the cooler yourself, then you need to use the methods already discussed.

Cleaning the cooler from dust

How to increase the speed of the cooler on a laptop? To answer this question, you need to monitor the surface of the cooler for dirt. This way you can improve cooling efficiency in any case. Unfortunately, cleaning a laptop from dirt is quite difficult. It is necessary to remove the cover and get to the required element. Not every user can do this. If you are not confident in yourself, then you should not go there, as you can only harm your computer. If you notice that the laptop has clearly started to slow down and the cooling is no longer working as well as before, then you should clean it. You can do this yourself or contact a service center.

How to increase the speed of the cooler on a laptop Acer, Samsung, Asus and other models? For most computers, universal methods can be used. If you do not want to interfere with the operation of the laptop, then it is worth installing suitable drivers. Otherwise, you need to install additional software.

By default, laptop coolers operate in automatic mode. But cases may arise when you have to intervene in the process and regulate the speed of their rotation. For example, the cooler began to spin too quickly for no apparent reason, or, conversely, when there was obvious overheating, the cooling efficiency dropped.

Increased noise may indicate wear and tear on the plastic parts from which the fan is made. If the sound changes gradually, increasing over time, most likely the cooler will have to be replaced.

Sometimes removing dust with a vacuum cleaner helps. The nozzle that sucks up dust should be brought to the ventilation holes of the laptop; if the dust has not yet had time to “fix” itself in the case and there is not very much of it, then there is a chance that the debris will be transferred inside the dust collector.

Important! In other cases, you will have to open the case. This is best done in service workshops. If the laptop is not under warranty, then you can open the case yourself, but at your own peril and risk.

In cases where there is no dust, but for some reason the speed still needs to be increased, you will have to use software methods.

Most laptops have the ability to make various settings in the BIOS Setup program. To enter the BIOS initial setup program, you should:

Important! In BIOS Setup, you can set a password, without which an unauthorized person will not be able to make changes to the settings.

Video - Setting the cooler speed in the BIOS

Changing cooler speed using programs

Speedfan

A small program for Windows, distributed free of charge. Needed to monitor the temperature of the internal components of the PC and the speed settings of the coolers (if there are several of them).

The latest version of the program is Speedfan 4.52. Compared to previous versions, device support has been improved, bugs have been fixed, and the list of supported systems has been expanded.

Download the program from a reliable site by following the link: http://www.almico.com/sfdownload.php.
Click on the program name in the text.
Left click on the downloaded file.
We accept the terms by clicking on the “I Agree” item.
In the open window, click on the “Next” option.
You can leave the path for storing the file or change it by clicking on the “Browse” button, then click on the “Install” button.
After completion, click on the “Close” button.
Right-click on the Speedfan shortcut and run as administrator.

How to install Russian language

Setting up the cooler using the Speedfan program

The program itself works simply:

the section indicating “Fan1”, “Fan2…Fan5” provides information about the fans available in the system and the actual speed of each of them. There is only one working cooler in the picture - “Fan1”, its speed is approximately 1762 rpm, units of measurement are revolutions per minute;
To the right of this section is information about the temperature of system components, such as hard drives and processors. Data is constantly updated;
To manually adjust parameters, the “Auto fan speed” option must be disabled, that is, the checkbox must be unchecked;
You can manually change the speed using the “Pwm1…Pwm3” section.

Important! Fans should not be turned off completely as this may cause overheating and damage to processors or other hardware components.

Video - Review of the Speedfan program for beginners

Amd Overdrive and Rivatuner

AMD has developed a program for its devices with which you can not only overclock the processor, but also monitor the temperature conditions of the boards. The Amd Overdrive utility allows, in particular, to control the speed of system fans.

On the “Video” tab, you can change the fan speed of the integrated video card using the slider, but to activate manual mode, you should check the “Enable manual fan control” box, after which you will be able to set a value other than the automatic parameter (20%).

Riva Tuner– a more universal utility that allows you to manage AMD and NVidia devices, created by Russian-speaking programmers.

Allows you to control the video card cooler by setting its rotation speed to a constant speed, or by setting it as a percentage, depending on the system load.

In addition, it is possible to create fan operation profiles that will be connected by the user based on specific situations.

In what cases can you not increase the cooler speed?

Many BIOS versions will not allow you to manually change the fan speed settings. For clarification, you should read the documentation of your PC (laptop).

If in the BIOS Setup settings the “Speed Fan” item is set to “Auto”, you need to try changing it to “Manual”, that is, manual, then press “F10” and save the settings.

It happens that some laptops offer different options for setting up coolers:

You should be very careful about cooling your laptop, since several devices can fail at once, which will make repairs pointless, due to its high cost, and as a result you will have to purchase a new computer.

Mechanical cleaning

If the PC still overheats and nothing helps, you will have to remove the bottom cover of the laptop and remove the dust manually.

Attention! If the laptop is not yet out of warranty, then any internal tampering will result in loss of warranty.

To open it you will need small screwdrivers, usually Phillips.

Important! Before disassembling, you need to remove the media (CD or DVD) from the drive, turn off the laptop and remove the battery.

Video - How to easily increase the speed of the cooler on a laptop

The cooler is one of the most important components of a laptop or computer. It helps cool all elements of the device and removes hot air through special holes.

Some laptops use only half the power of the built-in fan or even less. A weak cooling system leads to overheating of the device, which is very dangerous for its overall operation. If you begin to feel that the laptop is getting hot during operation, then the problem lies precisely in the operation of the cooler.

This factor is due to the fact that the operating system does not specifically activate all the fan capabilities to save energy. It is possible to fix this on your own, and below we will discuss how to speed up the fan on a laptop.

Increasing laptop fan speed

To configure, you will need to download the Speed Fan program. Launch the application and follow the instructions below.

Initially, analyze the temperature parameters. In the window, find the device whose indicators are noticeably above normal temperature. Click several times on the “Up” arrow, which is located next to the name of the fan built into the device. Next, wait until the desired temperature is normalized for the cooler rotation speed. Then minimize (do not close!) the program.
It is possible that this program does not interact with your operating system. In this case, download the AMD OverDrive application. This application is especially suitable for laptops with an AMD processor. Wait for the main menu to load and open the Fan Control tab (located in the Performance Control subsection). Below the image, drag the sliders to 100% and click Apply to set the values.
Then click on Preferences and then on Settings. In the menu that appears, check the Apply my last settings checkbox. This function allows the program to automatically include the parameters you specify every time you start the device. All you have to do is click OK and close the application.

For an Intel laptop, it is ideal to use the Riva Tuner app to increase the fan speed. Below we will tell you how to configure settings in version 2.24c of the program. However, it is likely that the manual will also work for other versions. For proper operation, you must have an NVIDIA video card and the appropriate driver installed on your laptop.

Install and activate the program.
Next, go to the “Register” and next to AutoFanSpeedControl put the number 3.
Close the program using the cross or press exit. Launch Riva Tuner again.
In the “Home” tab, left-click on the triangle next to the name of the video card and in the menu that opens, check “Low-level system settings.”
A window will open again in which you should check “Enable low-level cooler control.” Next, select “Define”, set it to 100% and confirm with the “Ok” button. After rebooting and checking the operation of the cooler using the new parameters, you can set the automatic mode in the “Auto” section.

Important: At least once a year, the device must be disassembled and cleaned from the inside. It is also necessary to lubricate the bearing. Thus, you will significantly extend and increase the speed of the fan and the laptop as a whole.

The problem of strong fan noise when the laptop is running is sometimes not related to overheating and is observed even on new devices. You can get rid of the unpleasant sound of a cooler not only by radically replacing an element of the cooling system, but also programmatically, using simple free utilities. They can also increase the speed if you feel that your mobile computer is overheating. Next, we’ll tell you how to control a fan on a laptop using the device’s built-in tools and specialized programs.

Changing the operating mode of the blades in the BIOS

Some manufacturers have made it possible to control the laptop cooler directly from the BIOS. This does not require installation of special applications; everything necessary is already available in the system:

Enter the laptop's BIOS, which usually requires pressing Del at the very beginning of boot.
Find the POWER section, and in it the line HW Monitor Configuration. There is an option here that allows you to configure the fan on your laptop. You should look for a line with the word “Fun” - the exact name of the command may vary between different device models.
Here you can select one of the cooler operating modes, for example, “Turbo”, which will control it in aggressive cooling mode, which can be useful, for example, when overclocking the system.

After the setting has been changed, you must save the new system operating parameters and reboot the device.

If the BIOS does not allow you to control laptop coolers, then the same task can be successfully solved by using simple and often free third-party applications. With their help, the speed can be adjusted within any limits, up to the complete stop of the fan. Moreover, the utilities can work with all laptop coolers installed in the system at once.

Working with the SpeedFan program

This utility is one of the most popular today. Its wide distribution is facilitated by its free nature, a simple interface that allows you to adjust the speed of rotation of the cooler on a laptop, as well as the ability to monitor in real time the operating parameters of system hardware components.

An important feature of the application is that it can run on a laptop whose fan speed is controlled from the BIOS. Often, this standard method allows you to change the cooler speed of only the central processor, ignoring the graphics one. Let us describe below how to configure the cooler on a laptop with the SpeedFan utility:

If the laptop fan rotation is changed in the BIOS, this option must be disabled. Otherwise, at the first moment of operation, the program may receive underestimated results for determining the maximum rotation speed of the cooler, as a result of which the utility will not be able to control the speed of the laptop fan at full speed.
Install and launch the application. In the “Readings” or “Indicators” tab you can see the temperatures of the components and the speed of the selected fan.
How to change the cooler speed on a laptop can be determined experimentally by changing the switch parameters for each element of the cooling system. You can adjust fan rotation settings to cool not only the CPU, but also the hard drive and GPU.

In the “Speeds” tab, it is also possible to change the parameters within which the rotation will change. There are only two switches that set the lower and upper limits of the blade rotation range for each cooler.

Other applications for changing the rotation speed of laptop blades

The method describing how to set up a fan on a laptop using SpeedFan may not be suitable for some users for various reasons. In this case, you can use other utilities:

AMD OverDrive, the main purpose of which is to overclock systems controlled by AMD processors. Here, one of the options is to control the cooler on the laptop.
Riva Tuner for working with Intel chips, the operating principle of which is also intuitive.

The main thing you shouldn’t forget about when independently controlling a laptop fan is temperature control. To do this, you can use additional utilities, for example, CPU-Z and the like. Remember that by lowering the speed, you risk overheating the processor. On the contrary, increasing the speed increases the noise of the cooling system and energy consumption, as a result of which the operating time of the device without recharging will decrease slightly.