Firmware using launch nokia care suite. Firmware for Nokia Lumia smartphone. Flashing Nokia Lumia to Android

Official firmware update using NSU for Retail
This method is suitable for all phones, both WP7 and WP8. For Lumia 610/710/800/900 the dload bootloader must be installed.
1. Download , .
2. Install, launch
3. Connect the phone. NSU itself will find the latest firmware for your product code and offer to update.

4. We agree with the warning and wait for him to download and install everything himself.

Official firmware update using Nokia Care Suite
This method works for all Nokia phones, both WP7 and WP8. For Lumia 610/710/800/900 the dload bootloader must be installed.

1. Download the flasher installer:
2. Install. For Windows XP you also need to install the latest Windows Media Player.

5. Launch Care Suite, select Product Support Tool for Store, if a window appears asking for a login and password, select Work Offline.

6. Uncheck "Automatic product selection" at the top left

7. Click File>Open Product... and select your phone model

8. In the lower left corner of Programming>Recovery, the copied firmware should appear in the list. If it’s not there, it means you copied it to the wrong place, check everything carefully again.

9. If you are flashing firmware with a product code different from the one for which the phone is intended, or it does not turn on fully, skip this step and move on to the next one.
We connect the phone in normal mode, click Start and wait until the firmware is installed. There is no need to touch the phone, it will reboot itself where necessary, and at the end of this process it will boot into normal mode, in its factory state (all data and settings will be cleared)
10. If for some reason your device does not turn on fully, then you need to:
Disconnect cable
Click the Start button
Wait until a window with a "retry" button appears
Connect the phone and at the same time start holding the on + volume down buttons (take the device comfortably, with one hand, hold it for a long time, and the second hand will come in handy later)
After 5-7 seconds the vibration will go off
Hold down the buttons and press “retry” in the window (the message “reboot” will appear and the phone will start to reboot)
The buttons can be released
Another dialog will appear warning that the product code is not suitable, click the “continue anyway” button.

Installing official firmware using NSS Pro
This method works for all Nokia phones, both WP7 and WP8. For Lumia 710/800/900 the dload bootloader must be installed.
NSS Pro is an unofficial flasher for Nokia phones that uses part of the NCS/NSU libraries to flash official firmware. The flasher behaves very unstable on Win8, the most common reason for crashing is switching to another window. Therefore, if you still decide to use it on this OS, be patient and do not switch to other windows during the firmware process.

1. Download NSS Pro from
2. Download and install.
3. Download the firmware files for your phone model.
4. Unpack the firmware into the required folders (folders marked in gray are hidden, make sure that showing hidden files is enabled in Explorer; those marked in green are absent if you have not downloaded the firmware via NCS, so you need to create them yourself):
For XP: C:\Documents and Settings\All Users\Application Data\Nokia\Packages\Products\RM-xxx
For Vista/7/8: C:\ProgramData\Nokia\Packages\Products\RM-xxx
You need to copy all the files received in the previous step to this folder.

5. Connect the phone to USB in normal mode, launch NSS Pro.
6. If the drivers are installed correctly, Nokia USB Connectivity should appear at the bottom of the list of devices. Press the Detect button, after which the phone’s IMEI and model should appear in the status line.
If only Windows appears there, close NSS Pro, open Care Suite, wait until it switches the phone to the correct mode, close them, and without disconnecting the phone from the PC, return to NSS Pro. Now the phone will be detected normally.
7. Go to the Flashing>File Selection tab, in the Products section, select your phone model and click Flash.
8. Wait for the firmware process to complete.

We remind you: if you are flashing from Windows 8, under no circumstances switch to other windows! If NSS crashes during the process of sending the firmware, you will receive a brick that may not be recoverable without the help of SC, depending on the stage at which the firmware process was interrupted!

Nokia is one of the world's most popular brands. Telephone sets of this brand have long established themselves as reliable and high-quality equipment. But unfortunately, any device sooner or later becomes obsolete. In order for your favorite smartphone to work for a long time and perform all its functions, you need to change the firmware from time to time. To put it simply, update the gadget’s software.

The latest models can be updated from the device itself. To do this, go to the menu - settings - phone management - device update.

If there is no such function, you will have to flash it manually.

How to flash a Nokia phone using Software Updater

It is quite simple to reflash the device of this Finnish corporation; the company took care of this in advance by developing a special utility “Nokia Software Updater”.

In order not to “kill” your smartphone during the update process, you need to follow several rules:

• You cannot talk or receive SMS during installation. Therefore, it is very important to find a SIM card that no one will call one hundred percent.
• Do not disconnect the USB cable and the phone. Do not also forget that the lights may turn off, so it is best to use a computer with an uninterruptible power supply or a laptop. In general, you cannot stop the update process.
• It is also recommended to remove the PIN code. The smartphone will require it, and during input you can accidentally disconnect the cable.

The Software Updater utility is official, so problems after the update can be fixed at the service center. Unless, of course, they are reversible.

For the firmware you will need:

• Telephone
• USB cable
• PC with at least Windows XP operating system
• PC Suite program for connecting the device to a laptop in the required mode
• Battery 100% charged
• SIM card
• Internet

When everything is ready, you can begin the process itself. We connect the device to the computer and launch it through the PC Suite program. Click on the first icon (this is an image of a safe), and following its instructions, we make a backup copy of your smartphone data. This is done because after flashing the firmware, the saved data will be lost.

After that, launch Software Updater and again follow the instructions. The utility downloads the new firmware version and installs it on the phone itself and reboots it. At this moment, you do not need to touch the cable or mobile phone. Its disabling is not due to a malfunction, but to the operation of the program.

When the updates are installed, you can finally restore the backup copy of your data and continue using the gadget.

If Software Updater does not see the phone, then check the following:

• The phone must be turned on
• The USB cable is connected to both the computer and the telephone. Is it correct?
• Drivers must be installed on the computer. You can view it in Device Manager. If it contains devices with a question mark, then install drivers for them.

Check the correct connection is being used. Many models require you to select a type when connecting the USB cable.

You can flash a gadget not only to update the software, but also to expand its functionality. The Lumia line has slightly limited functionality, and it can be expanded using firmware. For example, download files using a browser, install third-party applications, not just from the marketplace, transfer files via Bluetooth, take screenshots, access the file system, and much more.

Nokia Suite - continuation of the Nokia Software Updater program

For newer phone models, Nokia Suite is used. The meaning remains the same. In fact, only the name has changed. Here is a screenshot of the program:

How to flash Nokia Lumia phone using Lumia Downloader

Important. The only disadvantage of this method is that you will have to reset the settings, and files stored in the internal memory may disappear. Therefore, even before installation, you need to make a copy of the necessary documents.

For installation you will need:

• Smartphone
• USB cable
• A computer with an operating system of at least Windows XP
• Battery 100% charged
• Lumia Downloader
• Internet

The device must have an unlocked Qualcomm installed. Only him, others will not do. Download the Lumia Downloader application on your PC, install it and right-click to launch it as administrator.

After this, you need to put the phone into download mode. This is done like this: turn off the device and disconnect it from the system unit. After that, hold down the volume key and turn it back on. There should be vibration when turned on. If it is, then connect the USB cable to the phone.

If a window appears with the question “Before using the disk, you need to format it. Format? Do not agree under any circumstances, but cancel. If you format the disk, the gadget will “die” and can only be resurrected in the service.

In the Lumia Downloader application, click Download ROM and select the file with pre-downloaded firmware for your model. It can be downloaded from sites specializing in Nokia. After selecting the desired file, the program will ask whether to continue downloading or not, we agree. And three minutes later the software is installed.

But that is not all. You need to take your cell phone out of download mode. We pull out the USB cable from it, take out the battery and insert it back. For models with a non-removable battery, press the power button for about ten seconds. After turning it on, we reset the settings. That's all. The smartphone has been updated and many new features have appeared that will delight the owner.

Do not forget that independent flashing is carried out only at your own peril and risk, and if something suddenly goes wrong, the blame will lie only with you.

Flashing your phone's firmware is sometimes the only option to restore its stable operation without having to contact a service center or private technicians.

Let’s say your smartphone starts to freeze, won’t turn on, doesn’t respond to commands, can’t update, can’t find the network, etc. In such cases, it is not necessary to immediately contact specialists; you can first try to reboot, reset the settings, or, as a last resort, reflash it with the official Windows Device Recovery Tool.

If you are looking for information on how to flash your Nokia, Microsoft Lumiya or any other smartphone based on Windows Phone and Windows 10 Mobile yourself at home, then these instructions will help you with this.

Firmware for smartphone on Windows Phone 8, 8.1, 10 via computer

Important! Before you start flashing your device, make a backup copy of your data, as all files and documents will be deleted. After the procedure, you will receive a completely clean phone. Read how to backup data through the Windows 10 Mobile interface. You can simply transfer all the files to your computer.

What is required for the firmware

1. PC or laptop with Windows 7, 8, 8.1, 10 installed;
2. Working USB cable and port;
3. Firmware program;
4. The victim herself, whose battery must be charged at least 50% (preferably fully).

Download and install Windows Device Recovery Tool

This program is specially created for updating smartphone software. You can download it for free from the official Microsoft website at.

1. Download the installation file;
2. Install the utility;
3. We launch it and connect the phone to the computer.

Step-by-step flashing process

Important! Before you begin, keep in mind that you cannot turn off the device during the procedure. It is also prohibited to close the program, turn off the computer, etc. Otherwise, instead of a smartphone, you will get a lifeless brick.

So, we launched the program and connected the smartphone. The following window will open:

Click on the image with the device, after which we see information about the available firmware version. Select "Reinstall software".

Click “Continue”.

In the next window, you can leave nothing marked and select “Continue without filling.”

and then installing it.

After some time, the phone’s firmware will be completed, click “Finish”.

In this simple and official way, we updated the software of our smartphone. After this, the device will reboot several times and you will need to configure it before the first launch.

First launch after flashing

After the smartphone starts, you need to select a language and continue setting up by accepting the terms of use.

In the next step, you can select the type of settings - recommended or custom. If the latter, then I advise you to uncheck all the boxes except the first two and last two points. After this, you need to configure the region and time: set the country, time zone, exact date and time.

This firmware method is suitable for all phones (for example, models 520, 535 Dual Sim, 800, 920, 710, 610, 925, 620, 914, 630, 510, 525, 1020, 620, 625, 635, 820, 900, 830 , 430, 435, 1520, 930, 640 XL, 550, 735, etc.).

This utility can also flash Windows phones from other manufacturers, such as LG, BLU, Alcatel, Acer, HTC (One M8 and 8X), VAIO, UniStrong, HP.

If you have Nokia and it does not work on Windows Phone, then for firmware there is a program called Nokia Software Recovery Tool, which you can download from

How to flash Nokia Lumia?

There are several ways to flash a Nokia Lumia smartphone based on Windows Phone. In this article, we will tell you how to do this using the official Nokia Care Suite application, which is suitable for any smartphone with Windows Phone 7 and 8.

Download Nokia Care Suite

The Nokia Care Suite application is designed for official firmware flashing of smartphones in specialized service centers. However, it can be freely downloaded online using a link from the official Nokia website. This way you will get NokiaCareSuiteForStore-2013.49.3.30 version.

After downloading, install the application, and if you have Windows XP, then also update Windows Media Player to the latest version.

How to flash Nokia Lumia: instructions

Launch the Nokia Care Suite application and select the Product Support Tool for Store utility. To search for firmware, open the “Tools > Firmware Download” menu and enter the Product Code of your smartphone. You can find out either through the application itself, or look at the battery, and if the battery is built-in, at the information next to the SIM card slot. This code is usually seven digits long and looks like 059xxxx. Having specified the code, click “Check online” - and the application will find the appropriate firmware, after which it can be downloaded using the “Download” button.

After downloading, disconnect your smartphone from your computer and close Nokia Care Suite, then open the application again and select the Product Support Tool for Store utility again. Go to File > Open Product and select your smartphone model number. It looks like RM-*** and is indicated on the box next to the barcode, as well as in the battery compartment and in the application itself.

After selecting the number, click the “Programming” button and then “Recovery”. Information about the selected firmware will appear. Click “Start” and wait for the error message to appear with a “Retry” button.

After that, connect your smartphone, hold down the volume down key and the power button on it, and in Nokia Care Suite press the “Retry” button. As soon as the smartphone vibrates, release both keys on it and hold down the volume up button. Wait until “Rebooting” appears in the Nokia Care Suite window. Then the Nokia logo will appear and flashing will begin. Once the process is complete, the smartphone will reboot on its own. After this, you will have to configure it again, since all parameters will be reset to factory settings.

You may also be interested in the article and other useful publications on our website in the section.

Many owners of mobile devices running the Windows Phone operating system dream of the capabilities of Andoid smartphones. After all, significantly more applications and games are available under the “robot”. Also, on Android you can easily install custom (custom) firmware and, in general, flexibly customize personalization. You can solve the problem by installing special launchers or utilities. In this article you will not find the answer to the question of how to install Android on Windows Phone. We will only look at and show you how you can install applications from the Playmarket.

One of the disadvantages of the Windows Phone operating system and, as a result, Microsoft smartphones is the small number of programs in the company store. As a result of this, users simply do not have the opportunity to play many cool games and use applications available for Android. An APK Deployment utility has been created especially for devices running Windows 10 mobile. By following the instructions below, owners of Nokia Lumia smartphones will be able to easily install their favorite Android application on their mobile phone:

• Download the APK Deployment program archive.
• Connect your mobile phone to your computer using a USB cable.
• Launch developer mode on your phone. To do this, you need to enter the main settings, select Update and Security / For Developers.
• Extract the downloaded archive with the utility to any convenient directory.
• Install the IpOverInstaller.msi and vcredist_x86.exe files.
• Open the executable file APKDeployment.exe, located in the folder with the unpacked program.
• Enter the PIN code that appears on the screen of your mobile device in the Key to pair field.

Utility for installing Android applications

After that, you can try downloading any apk file to your computer, preferably from a reliable source, and drag them into the APKDeployment utility window. You need to confirm the installation of the selected utility or game by clicking the Deploy All button. You can install selected programs from the list by selecting them separately using the Deploy button. Now all that remains is to find the installed programs on your tablet or phone and try to run them. If everything is done correctly, then you can now enjoy your favorite Android programs and games on your device.
You can see the utility's capabilities in more detail in the training video below.

Personalization

Especially for those who are not happy with some aspects of the Windows Phone operating system, the developers have released a special launcher. You can download KitKat Launcher to install it on Nokia Lumia in the Microsoft brand store. When launched, the program opens in full screen mode, allowing you to interact with the programs with the basic functions of your mobile device.
The main features of the launcher include the following:

• A large number of new icons and widgets.
• Ability to change the design of the desktop and main menu tabs.
• Quick launch of programs.

It is worth noting that KitKat Launcher is not a full-fledged Android operating system, but is intended only for superficial personalization changes. You can evaluate what this utility is like from the screenshots below.

Difficulties in installing Android OS on WP

You can find sites online that tell you how to flash your smartphone on the Android operating system. There are even custom (custom) firmware with the latest OS version for Lumia 520 and 525 smartphones with detailed installation instructions. But it should be noted that performing such an operation is strictly not recommended for several reasons:

• In smartphones and tablets running Windows Phone OS, the Bootloader is closed.
• There are no necessary drivers for all modules and sensors (camera, wi-fi, bluetooth, etc.).
• It is impossible to make a backup and return the Windows Phone OS back.

Also, such a procedure will lead to a violation of the possibility of warranty service and all consequences for it will not lie on the shoulders of the user. Therefore, instead of changing the firmware, it is better to install a special launcher from under the “robot”. You can see what the latest Android 7.1 nougat OS looks like on the Nokia Lumia 520 smartphone in the video below.