Philips TV tricolor via hdmi. How to connect a Tricolor TV receiver - step-by-step instructions

Tricolor is a satellite dish that allows you to connect several hundred channels in high definition. The plate is mounted on the roof or wall of the house, a tuner and a convector are installed. After which you can connect the tricolor to the TV. It is possible to connect several devices to the antenna.

Signal sources

To watch channels on your TV, you need to connect the antenna and receiver. This is done through special holes that are located on the devices. There are several types of connection:

Gradually, the Tricolor TV company is switching to the latest signal transmission option. That is, users can enjoy the picture in HD format.

Antenna connection

This is the easy part. To connect devices you need:

1. Prepare the coaxial cable.
2. Unscrew the braid onto the insulating wire, exposing the cable core in the center.
3. Connect connector F to both ends of the wire.
4. Connect to antenna.
5. Connect the second end to the LBN in input of the receiver.
6. Attach the cable to the plate.

At the end of the procedure, it is necessary to check the reliability of the fastening, since the quality of the received signal depends on this. If you need to connect an antenna to a second receiver, then you need to buy a two-tuner set-top box and a client receiver.

The connection process is quite simple. Necessary:

1. Connect the cord to the appropriate slots.
2. Configure the receiver.

In order to properly connect two receivers, you need to go to the network section and select “server”. There are options when it is not necessary to connect the tricolor receiver to the TV. An antenna, a device with a Smart function, a special card and a module will be enough.

In this case, to make a connection, you must:

After the action has been performed, a picture should appear. If this does not happen, then you need to call a telemaster. This can be done by calling 88005000123. The specialist’s work is paid.

Connection to TV

Before connecting the tricolor set-top box to the TV, you need to check it for the presence of outputs. The rear panel may contain: LNB IN - connection to the convector, LNB OUT - antenna connection, power socket, etc. The set of connectors may differ depending on the type of receiver.

Additionally, you need to view the firmware version. Some of them allow you to broadcast the picture to all outputs. In certain cases, you will have to choose which output to send the signal to.

The high-frequency cable is inserted into the LNB OUT connector and the antenna is connected. The TV and receiver turn on. Boot will appear on the screen followed by the channel number. The client needs to configure and wait for the message “No signal”. It will mean that it was possible to connect the tricolor receiver to the TV.

The remaining cables are connected in the same way and setup is carried out. If the TV is old, then it is connected using a “tulip”. It has three outputs in different colors. The first is responsible for the video image, the second and third for the audio signal. This connection option will not be able to transmit the picture in high quality.

Tricolor can be connected to two TVs using the following algorithm:

If you managed to connect the tricolor to the TV, then in the “network settings” item the server with which you need to connect will appear. You need to select it and click “Search” . The second receiver will have to be updated:

1. Set channel No. 333 “telemaster”.
2. Wait 5-10 minutes.
3. A column for updating will appear.
4. Confirm action.
5. Wait until the end.

You can watch channels on different devices using Wi-Fi. To do this, set the necessary settings in the receivers and download the “Play Tricolor” program. Next, you need to connect to the Internet and set the settings in the application.

To connect the tricolor receiver to the TV, different cables are used. The first step is to connect the antenna, then the receiver. Initial setup is required. Tricolor can connect to several TVs and other devices.

Tricolor TV refers to satellite television that broadcasts Russian-language terrestrial channels in digital quality. First of all, this package is used by remote areas located in the European part, where regular over-the-air channels are of very poor quality, or their reception is not possible at all. Therefore, nowadays, users are increasingly asking how to connect Tricolor TV to a TV.

Tricolor TV confidently receives television channels, regardless of the distance to television towers, the power of repeaters, interference and other problems that often plague over-the-air broadcasting. This is one of the main advantages of digital broadcasting, since the signal from the satellite is transmitted to equipment installed directly at the user. Tricolor TV covers vast territories, with high signal quality and a large number of channels.

How to connect the Tricolor TV package

To connect to digital broadcasting, you need a satellite antenna, a so-called dish and additional equipment in the form of a receiver (also known as a tuner) and a convector. After installing the antenna, it is connected to the TV through the receiver.

On the rear panel of the receiver there are LNBIN connectors that connect to the convector. The high frequency antenna cable is connected to the LNBOUT connector. There is also a connector into which the power supply is connected. In addition, there is a connector through which the tuner software is updated. Depending on the firmware of the receivers, the signal can be broadcast either to all outputs or to just one of them.

After all cables are connected, you need to turn on the TV and receiver. In case of normal operation, the word “Boot” will appear on the receiver display. Then, the channel number will appear instead. It is necessary to search for channels on the TV until the message “No signal” appears. This indicates that the receiver is connected correctly. The connection must be made very carefully, paying special attention to the choice of cable connectors.

Connecting multiple TVs

When deciding how to connect Tricolor TV to a TV, an additional question arises about the possibility of connecting several television receivers at once.

According to experts, you can connect as many TVs as you like. However, in this case, the same channel will be broadcast. To change channels you must use a radio remote control or a radio extender. In order to watch different channels, a separate Tricolor TV receiver must be installed for each TV.

How to connect tricolor TV to 2 TVs

Digital television and wireless Internet today are no longer something special; they are available to almost everyone. The price of the service is low. True, not every TV (if connected to satellite TV) is capable of supporting this format. This requires special equipment that converts the digital signal into analog.

Why do you need a receiver? This is a device that sees satellite television signals, converts digital codes into analog ones and transmits them to a TV (for example, Samsung). To make the signal clearer, and to connect the receiver, it is best to use only one wire. Thanks to this, switching signal sources can be done on the receiver itself. And all you have to do is turn on the TV. The most popular provider today is wireless Tricolor TV.

From this comes the first rule for connecting a receiver - connect it to a TV or computer in such a way as to ensure maximum signal reception quality. Depending on the degree of quality reduction, several connection options can be distinguished (if we are talking about a video image):

• HDMI wireless.
• Component.
• S-video.
• Composite

For an audio antenna, the choice becomes even smaller:

• HDMI (not yet available everywhere);
• digital (optical or coaxial);
• analog RCA connection.

The second important point can be formulated this way: the simpler the better. This means that the TV receiver should have as few wires as possible. True, in this case the number of users will matter. If there are more than three, ease of connection will come in handy. If the number of viewers is minimal, you can focus on quality and install a receiver with several connecting contacts. The third rule is that the cable should not be cheap or have excessive length. A short wire “sees” the signal better. But at the same time, its length should be such that you can freely check the connection by unfolding the monitor.

Methods for connecting the Tricolor satellite dish to a TV

There are at least several popular options for connecting the receiver to a TV:

1. HDMI connection (by the way, some Samsung models support it). The most preferred option due to the high quality of both audio and video signals. One end of the HDMI cable is connected to the output on the rear panel of the receiver, and the other to the TV, if there is a socket for the appropriate connection.
2. The composite connector is the simplest, but the picture quality leaves much to be desired.
3. The S-video port is connected via more than one wire, but at the same time it allows you to receive a clearer signal from the Tricolor antenna, but the color rendition is a little poor.
4. RCA, which are also called “tulips”. This is a three-wire component interface that can be used for plasma panels and LCD monitors (Samsung, for example). The image quality in terms of color and clarity is quite acceptable.
5. If SCART is used, the television receiver is connected in one of three ways: S-video, composite or RGB. Of all the analogue ones, the latter, by the way, is the highest quality.

The Tricolor circuit when connected has its own characteristics, more on that below. In any case, you can install the connection to a wireless Internet network, satellite channels, etc. yourself, or you can invite professionals. In the latter case, you can be sure that everything will be done quickly and efficiently. The price of the issue is by no means exorbitant. Convenient, comfortable and fast. Immediately after finishing the work, you will be able to watch your favorite shows and movies.

The nuances of connecting the Tricolor antenna to a TV

The receiver for Tricolor can be connected using an antenna cable. To do this, you need to connect the receiver via the antenna cable through the antenna socket on the TV.
After this, you need to turn on the TV and receiver. The channel number will appear on the receiver display. Now on the TV remote control you should press the “0” button and start searching for satellite TV channels. Automatic scanning stops at the frequency to which the receiver is tuned. If the connection is correct, then the message “no signal” will appear on the TV screen (say, Samsung).

There is another option for connecting to satellite signals - using a cable with a bell or Scart connector. First, the receiver is connected to the TV with the required cable and turned on. The channel number also lights up on the display. To switch to video mode, press the A/V button on the TV. The desired antenna connection connector is selected through the menu. As in the first case, a message indicating that there is no signal should appear on the screen.

You can find information on the Internet about exactly how such an inscription should look. If something goes wrong, or there is no sign at all, it means that the receiver is not connected correctly and the TV does not see the satellite TV signal. In this case, press the “0” and “1” buttons on the remote control simultaneously. This is done in order to communicate with satellite equipment. As soon as the antenna signal is found, the channel will show a picture. Information about the enabled channel will be visible below. In order to see the scale of signal quality and its strength, you must press the “i” button on the receiver’s remote control. Why is it needed in this case? In order to more successfully search for a signal from a satellite.

After purchasing a TV set-top box, many users ask a completely logical question: “How to connect a digital receiver to a TV and what is needed for this?” Some models are replete with a large number of connectors, wires and other interfaces that can confuse owners who are inexperienced in this matter. However, despite all the seeming heaps of problems, you can find out how to connect a TV receiver to a TV without the help of a wizard.

First of all, let's figure out what a receiver is. Essentially, the only purpose of a set-top box is to decode various signals: video, audio, digital, analog and radio. After all this information passes through the main unit of the device, the device redirects it to the TV in its (correct) encoding. Thus, thanks to the TV set-top box, you can get rid of a bunch of cables in your home. In addition, if there is such a need, you can configure the transmission of channels to several devices. Also keep this in mind before connecting two TVs to one receiver.

Connectors

Most models of TV set-top boxes have a large number of connectors and interfaces. Of course, it would be easier to equip the device with one universal output for convenience, but not every home has a TV, for example, with a modern HDMI interface. Yes, such an output is capable of transmitting video and audio signals as correctly as possible, but such models are not cheap and not everyone can afford them.

Some people still can’t part with their “ancient” TVs, so many TV set-top boxes are burdened with versatility for the sake of convenience. However, before purchasing a set-top box, it would not be superfluous to check whether it has one or another connector/interface for your TV. Also keep this in mind before connecting your TV to the receiver.

Signal quality

You can count dozens of nuances that are responsible for the quality of the decoded image. Here is the original signal from the satellite that the receiver receives, the technical capabilities of the device’s interface unit, the type of cable used, and much more.

You need to choose the interface of a TV set-top box very carefully, taking into account not only the capabilities of your TV, but also the future provider, the type of satellite dish, and even the weather conditions of your region.

So, how to connect a TV to a receiver: interfaces, methods and additional equipment.

"Tulip" (RCA)

At one time, this interface was the only link between various set-top boxes and the TV itself. It got its name thanks to the three connectors resembling a tulip: white, red and yellow.

Each color represents a specific channel: white and red are audio outputs, and yellow is a video channel. For everything to work as it should, you need, according to the color coding, to connect to the appropriate interfaces, connecting yellow to yellow (Video IN c Video OUT) on the TV and set-top box. Do the same with the rest of the “petals”.

One of the main disadvantages of this connection method is the mediocre transmission of the digital signal, so high-resolution video will be output with noise (very small ripples). If the diagonal of your TV screen does not exceed 30 inches, then the interference is hardly noticeable. Obvious problems are visible on devices with large resolution. Keep this in mind before connecting the TV to the receiver using tulips.

S-Video

This interface is required for game consoles and DVD players, but not every TV is equipped with this connector. If we compare the S-Video and “tulip” outputs, the first one has better picture decoding. In addition, its signal frequency is much higher, which means the output image is more colorful and rich.

The only problem with the interface is the mandatory presence of a separate cable for playing audio tracks (we buy it separately), so you can’t call it universal. Also remember this and check everything before connecting the TV to the receiver via the S-Video output.

SCART

The “SCART” interface, or, in common parlance, “comb”, is much more universal, unlike previous options. In order to connect a TV through a receiver with this output, you just need to connect the appropriate connectors, and everything will start working.

The interface, although outdated due to its bulkiness, meets almost all modern requirements: support for stereo sound, S-Video channel and RGB format. This connection method, in addition to TV set-top boxes, is widely used on old DVD players.

RF interface

The RF type interface allows you to connect not only satellite broadcasting, but also cable television. The quality of transmission through this output does not have a good picture, so watching TV shows in high definition has the mesh ripples already familiar from “tulips”, as well as a problem with large diagonals of devices.

One of the main advantages of such an interface is the ability to connect the receiver to a second TV. The only condition that must be strictly observed is the presence in the set-top box of a high-frequency RF modulator and a corresponding output. But not all TV set-top boxes have such components. So keep this nuance in mind before connecting the Tricolor receiver to your TV, because many devices from this provider do not have this technical capability.

YPbPr and YCbCr interfaces (component)

These outputs transmit high frequency signals in a similar way to a tulip. Unlike the RCA interface (3 “petals”), the component system (5 “petals”) allows you to decode signals with high accuracy and the same quality. That is, with the help of such a connection, you can watch videos in Full HD with proper comfort.

The only difference between the YPbPr and YCbCr component interfaces is the decoding system, where in the first case it processes an analog signal, and in the second - a digital one.

The connection is as follows: the green, red and blue “petals” (aluminum) are connected to the corresponding outputs on the panel marked “Video”, and the other two - white and red (plastic) are connected to the platform with “Audio”.

The green cable is responsible for image synchronization and brightness level. The red “lobe” conveys the inter-level difference in brightness and red color, just like the blue cable. A two-pin RCA interface is responsible for outputting the audio signal.

HDMI

The HDMI interface is the most modern and universal method of connecting a receiver to a TV. A set-top box, as well as a TV, equipped with these outputs, is able to reproduce images in high quality and with amazing clarity.

This type of connection is suitable for absolutely all TVs with any diagonal that have a similar connector. In addition, the HDMI interface is capable of simultaneously digitizing both audio and video streams, so nothing additional needs to be connected for correct operation. All you need is one single cable.

Summarizing

Before buying something as expensive as a receiver, be sure to check whether your TV has certain outputs. If you have a new model, then it is probably equipped with an HDMI interface, which means there will be no problems with the connection, as well as with image quality.

In second place are the component “tulips” for analog and digital signals - YPbPr and YCbCr. Slightly worse than HDMI in terms of connection, but nevertheless the output picture is pleasing to the eye in the same high Full HD quality.

The third and fourth places go to the SCART and S-Video interfaces. The main thing here is not to overdo it with the screen diagonal, otherwise small ripples will be noticeable in high-resolution pictures.

The fifth and sixth positions went to the RF and RCA (“tulip”) connectors. The quality of the decoded signal on these interfaces is noticeably lower than that of others: low audio bitrate, slightly “blurry” picture and the finickiness of connectors for certain TV models.

You should also remember that before connecting the set-top box to the TV, you need to follow the following rules:

1. Be sure to unplug all devices from the electrical outlet when connecting.
2. Carefully study the manual, especially the “Connection” section.
3. Based on the second point, strictly follow the sequence of actions performed.
4. Use normal cables (branded RG-6), not Chinese thin fakes.
5. There is no need to use long cables as this directly affects image stability.

After you have connected the receiver, it would be a good idea to double-check everything (whether the cables are tight, markings, etc.), and only then turn on the equipment.

Each of us needs rest after a hard day at work, and as you know, for many the best way to relax is to sit comfortably on the sofa in front of your favorite TV. It’s even better if there is some interesting film or TV show on TV at that moment.

The role of TV in the life of a modern person

Today, not the entire population of our country has access to a large number of channels via a signal from an ordinary television antenna. Mostly people living in small towns face this problem. That is why you have to “poke” 2-3 channels throughout the evening, which, in addition, are not displayed in the best quality. Literally ten years ago there was only one alternative to this, namely the purchase of a VCR and cassettes, which are not so cheap.

Today, thanks to rapidly developing technologies, any person, regardless of where he lives, can become the owner of a large number of television channels. This is possible due to the connection of satellite television "Tricolor TV".

Work technology

Perhaps, in our time, all adults have already heard about satellite television "Tricolor TV". However, for most people, a satellite dish is still something very large and heavy. Modern equipment for satellite television is available in absolutely all representative offices of companies that provide these services, so connecting to Tricolor TV is available to absolutely everyone. Antennas for receiving signals of this type are now available in very small sizes. The diameter usually reaches a maximum of 70-90 cm, and the weight does not exceed a couple of kilograms.

Besides all this, few people have any idea how the technology for this type of data transmission works. The principle of operation is not very different from the operation of an ordinary antenna. In the case of standard television and a conventional antenna, the television signal is received absolutely in any place and direction. In turn, for the satellite dish to work, extremely precise adjustment of the direction to the satellite is necessary. It is enough to make a mistake of 1-2 degrees in the inclination - and the quality of the signal can sharply deteriorate or disappear altogether. Next, let's try to figure out how to connect Tricolor TV yourself.

Advantages of satellite television "Tricolor TV"

The first and, perhaps, main advantage of this TV over the usual one is the wide selection of television channels. Moreover, installation is possible in absolutely any territory of the country. Also, in addition to quantity, the quality of the image should also be noted. When using satellite television, this figure becomes significantly higher, which is good news.

A good alternative to this type is cable TV. However, this method is also possible in more or less large cities where there are companies providing this type of service.

How to connect Tricolor TV: trust the specialists

In order to install satellite television at home, you need to purchase a complete set of equipment. This kit includes a receiver, antenna, remote control and instructions that tell you how to connect a tricolor TV.

Today there are a huge number of craftsmen and companies that are engaged in connecting Tricolor TV satellite television. If you entrust the entire process to specialists, high quality is guaranteed. However, there are unscrupulous workers who, in addition to incorrectly setting up the equipment, may not install the antenna completely reliably, which in the future can lead to failure of the entire system as a whole.

Personal connection of equipment

Many people are wondering how to connect Tricolor TV themselves, so let’s try to look at this whole process.

First of all, it is necessary to carry out all the preparatory work. For example, you need to decide exactly where the satellite dish will be installed. Also make sure that there are no obstacles in the direction of the antenna. After all, do not forget that even the leaves of trees in the path of receiving a satellite signal are a serious obstacle, or more precisely, an obstacle. After this, you should decide on the location of the TV, and, accordingly, the receiver.

When starting the installation itself, you should start by assembling the antenna. Assembly can be done indoors for greater convenience. This process must be carried out completely according to the instructions included with the equipment. After the antenna is ready for installation, it is necessary to securely fasten it in the place prepared for this.

After this, you need to understand how to connect the Tricolor TV, or rather the receiver, to the TV and to the antenna. At this point, a lot depends on the TV model. Connection is possible in several ways. You can use an HDMI cable to transmit a digital signal. If your TV does not support this type of data transfer, then you should use an RCA cable, or, as it is popularly called, “tulips”. And finally, it is also possible to connect using a Scart cable.

Once the receiver is successfully connected to the TV, you need to start connecting the satellite dish. How to connect Tricolor TV is described in detail in the instructions. To connect the antenna to the receiver, you need to stock up on coaxial wire and several F-nut connectors.

When installing this wire, avoid laying it near electrical wiring. It is important to follow this rule, as otherwise there may be numerous interferences during signal transmission.

After the cable is laid and connected to the receiver and antenna, you need to start setting up the latter. To do this, you need to turn on all the equipment, go to the receiver menu and select the “Signal Quality” option. Each region has its own coordinates along which it is necessary to direct the antenna. They are indicated in the instructions. Next, you need to point the antenna at the angle indicated for your region. Having adjusted the signal quality to the maximum possible, you should fix the antenna in the final position. This completes the setup.

How to connect "Tricolor TV" cinema halls

In order to connect packages of additional channels, you need to contact the services that provide these services. There are a lot of similar companies today. You just need to choose a cinema hall and pay the cost of the corresponding package. Most often, payment is made per year of service provision.