The mouse buttons on the laptop do not work. What to do if your wireless mouse doesn't work. Ways to solve a problem with a USB mouse

A computer mouse is an integral device in the system. Some people experience situations where the mouse either starts to work poorly or fails altogether, but in Windows this thing is very necessary. I think many people have wondered, is it possible to somehow fix the mouse, or simply fix problems in the system due to which it does not work? Of course it is possible, and now we will try to resolve this issue.

If the mouse does not respond to any actions at all, many immediately run to the store for a new one, although others solve this problem on their own, which leads to long-term service of the manipulator.

Many of you probably know that there are several types of connecting a manipulator to a computer or laptop - PS/2, USB, Bluetooth and Wi-Fi. Thus, the first two are wired manipulators, and the second two are wireless. Each one may have its own problem.

Recommendations for troubleshooting problems for all manipulators

What should I do if the mouse still works, but is unstable, for example, it turns off and then turns on again?

When connecting the manipulator via USB, you should take a different USB cable. If the operating system on your computer has been installed for a very long time and has not been updated, then this may cause unstable operation of the manipulator; it is also possible that many other manipulators were connected to the computer, resulting in a conflict between the drivers.

Try connecting the mouse to a connector on another computer and if everything works well, then the problem is in the USB controller.

You can try to reinstall the mouse driver using the keyboard; to do this, press the Win+R combination and enter the command mmc devmgmt.msc .

We are in the device manager. Now you need to press a key Tab so that you can navigate using the arrows. Scroll down with the arrow to the point "Mice and other pointing devices" To expand the list, press the right arrow.

Move to the desired device and press Enter, a window will open where you need to hold down the Ctrl and Shift keys, and then press the Tab key to move to the tab "Driver", after that just press the button "Tab" and move to the button "Delete". Press Enter and confirm the action.

Restart your computer or laptop, and then reinsert the mouse, the driver should be reinstalled and, perhaps, everything will work.

What to do if the manipulator cursor does not stand still?

This is not such a difficult problem; perhaps the sensor is clogged with dirt, dust, or something is stuck and prevents the cursor from pointing at objects normally. I advise you to completely wipe the mouse, starting with the sensor.

The next problem is that the buttons on the manipulator almost do not respond when pressed, what should I do?

Here the problem is already related to the mouse itself, that is, at the hardware level. It is possible that the button or buttons failed due to too much pressing, or you pressed them so hard that they failed due to your fault. There is a possibility that dirt got inside and this prevents the button from functioning normally, you will have to disassemble the mouse and take a look. If no dirt is found, then most likely the microbutton needs to be replaced, which requires appropriate knowledge.

Several individual problems for manipulators

If you have a wired paddle, then common causes of failure are related to a wire that is kinked or broken. Inspect the cable carefully for damage.

What to do if your wireless mouse doesn't work? If these types of manipulators run on batteries, then it is quite possible that they have run out. Replace them. If the problem is not related to nutrition, then you will have to look for the problem yourself. Some of the types of problems described above may also apply to wireless paddles.

Another disadvantage of wireless pointing devices is that they can conflict with similar frequencies of other devices, it can be anything - a smartphone, tablet, TV, refrigerator, router, etc.

This article can end here. If you have any questions, don’t hesitate to ask them.

In this article we will try to give the most complete answer to the question why the mouse does not work and we will try to answer all related questions, such as: why the touchpad on a laptop or a wireless mouse may not work.
Almost every user sooner or later encounters such a problem as problems with the computer mouse. This can happen for many reasons, which, in turn, can be divided into two groups, depending on the source of the problem: hardware or software. What are these reasons, and how to eliminate them?

Reasons why the mouse may not work

Software

Software problems include:

• Problems associated with the harmful operation of viruses,
• driver failures or damage, as well as in the event of opening damaged files or archives.

Hardware

Hardware problems are problems caused by damage to the mouse itself. These include:

• Wire deformation;
• Contacts are damaged or clogged with debris.

It often happens that a user, while working at a computer, drinks tea, coffee or some other drink and spills the liquid. This often results in the mouse being disabled.
When purchasing a new mouse with a USB input and finding that the cursor refuses to move after connecting the device to the computer, do not rush to sound the alarm. Most likely, the installed operating system does not have the necessary drivers.

Troubleshooting solutions

The good news for all users is that it is quite possible to cope with most malfunctions on your own. To do this, it is enough to have at least basic knowledge of how hardware works. So, the action plan is:

• First of all, check your computer for viruses or other malware. You can do this using free antivirus programs, such as Avast.
• If this does not help, then proceed to the next step: reinstall the mouse driver, which could very well be infected with a virus.
• If this is not possible, then try restoring the previous version of the OS (operating system). How to do this in the video below:

Why the mouse does not work on a laptop: common reasons and ways to solve them

Reasons Why doesn't the mouse work on a laptop? there may be many. But this trouble is easily eliminated. First you need to determine what type of mouse is used for the laptop (touchpad, wired or wireless). Each type has its own characteristic causes of problems and ways to solve them.

Touchpad not working on laptop

If problems arise with the operation of the touchpad, they can be solved by correctly identifying the cause of the problem. So, the most common situations:

• Incorrect operation (freezes, interruptions, cursor disappears from the screen).
• The reason may be incorrect settings. When installing, it is recommended to use the included driver.
• In addition, special attention is paid to the cleanliness of the touchpad - simple surface contamination reduces the sensitivity of the device.
• It is forbidden to work with wet hands. To fix this problem, just clean the sensor from dirt and let it dry completely.
• The device does not respond.

The reason is that the panel is disabled. Solutions:

1. if present, check the on/off button;
2. in some models, the touchpad turns off when an external device (wired or wireless mouse) is connected - disconnect the additional pointing device;
3. In the BIOS settings, enable the support function for this panel (the enabled value for the Internal Pointing Device parameter).

If the problem cannot be resolved, you must contact the technical support center.

Reasons Why don't my mouse buttons work on my laptop? There may be problems with the mouse itself or a failure of the USB port, as well as incorrect connections and settings. To check, connect the mouse to a different socket or to another computer. If everything works, then you need to clean the input channels. Do not use long-haired rags or cotton wool as cleaning materials, and do not overdo the material with moisture. If the mouse does not react, it cannot be saved.
Wireless mice are becoming increasingly popular among users. The main problems with this type of mouse are:

• Complete lack of response to manipulation;
• Slow operation, freezing or braking.

The reasons for this may be:

• the mouse is not connected (insert the adapter (USB receiver) into the USB port and turn the button on the mouse body into working condition);
• The batteries are low (replace with new ones, and correct operation will be ensured again). The reason is quite banal, but many do not even suspect that the mouse is powered by batteries.
  It is recommended to use rechargeable batteries rather than regular batteries - this will prolong the operation of the device. In addition, if the manipulations described above did not help, you should check the functionality of the USB port to see if it is dirty. Perhaps the mouse itself is faulty. In this case, there is only one way out - replacing the mouse.

The mouse may not work in certain applications, but this is an individual story for each application. In the meantime, as an example, here’s a video with a solution to the problem why the mouse doesn’t work in the GTA game:

In the modern world, a laptop is an indispensable portable device; thanks to its relative convenience and functionality, this type of computer becomes even more in demand in cases where it does not require any additional equipment at all. For example, in order not to buy a separate mouse and not carry it everywhere, each laptop has a special touch panel built into it, which the user uses to control the laptop or netbook with his finger. It was not in vain that I made a short introduction, because sometimes the user simply does not know what it is called. In this article, we will talk about what to do if the touchpad on a laptop does not work. The topic is very common on the Internet and undoubtedly relevant. I will tell you about the most basic defects that can prevent the panel from working. The conversation will concern both hardware and software.

Windows setup

First of all, decide what you understand in your situation by the phrase “the touchpad is broken.” Perhaps you just mean its unstable operation: small lags, cursor deviations, variable responses to finger movements. And sometimes the touchpad may become unstable because your hands are wet or greasy after eating. But if you touched the touchpad with greasy hands, be sure to take a clean napkin and wipe the touchpad itself with it. Variable operation may also be due to incorrect settings in Windows. Go to “Start” - “Control Panel”. In the “View” item, at the top right, set the value to “Small icons” and select “Mouse” from the list presented.

Here you can change the pointer speed in the “Pointer Options” tab. If your settings specify too low a speed, then there will be difficulties when moving the pointer.

Don't forget to save after making changes. By the way, if the problem is related to certain gestures not working (for example, moving two fingers apart from each other - zooming), you just need to download the drivers from the official website of the laptop manufacturer. To do this, go to the website, look for your laptop model and download drivers.

How to enable the touchpad

The following situation is associated with the complete lack of response of the touchpad to any actions. Most likely, it turned out to be disabled for you. There are several ways to activate it. In the case when your laptop has a special button for turning on the touchpad, you don’t even need to think too much. Click it and everything will work.

Try also using the system combination with the Fn key and one of F1 to F12. Important! In order not to accidentally disable any important function by pressing the F1-F12 keys, it is best to pay attention to these keys and the images that are printed on them. Find where the finger or square with a cross is drawn.

On some laptops, when you disable and enable the touchpad, you can see an image on the desktop, from which you can understand what you have just done. Disabled or enabled the touchpad.

If you have a computer mouse connected in parallel via USB, try disconnecting it, as some laptops have an automatic function to turn off the panel when the mouse is connected. There is also a method to enable the touchpad through the BIOS. To do this, go there (when you turn on the computer, press F2, or F8, Esc, or Delete), go to the “Advanced” and “Internal Pointing Device” tab, set it to Enabled. After that, do not forget to save the changes you made to the BIOS.

This method is suitable for those users who install Windows on a laptop, but the touchpad does not work. Of course, you can use a mouse, but if you don’t have one, these settings will help you finish the job you started - install Windows or any other system. If the question of why the touchpad on a laptop does not work still remains unanswered, then most likely the problem is related to some mechanical damage. Here, the best solution would be to take your precious device to a service center, because it is strictly not recommended for users without experience to even open the laptop.

Something else you should know is how to check whether the system can even see your touchpad or not. So, let's find out: go to “Start” - “Control Panel” - “Device Manager”. We are looking for the “Mice and other pointing devices” tab. Disconnect all computer mice from the laptop. The name of the touchpad should be displayed there.

If you didn’t see anything, or the “Mice and other pointing devices” subsection is completely absent, then the problem with the drivers that you should have installed at the very beginning of the article or, as I said earlier, is related to the hardware. You will have to disassemble the laptop, and this is best done by specialists in this field.

Reset settings to default and check if the touchpad is enabled

It is possible that the program or utility settings are not selected correctly. To check this, let's reset the settings. Go to “Control Panel”.

Often such an unpleasant moment arises while working on a mobile PC when you realize that the mouse on the laptop does not work. There can be many possible causes of a malfunction, but they can be divided into two types: hardware and software. You need to look for the problem at the first stage from the very beginning. If everything is fine with them, then you can proceed to the second stage, at which the software, both system and application, is checked. The main thing is to understand that if the mouse on the laptop does not work, there is no need to panic, nothing bad happened. This problem can be solved on your own.

Manipulator test

You need to start by checking the functionality of the manipulator itself. To do this, you need to connect it to another port of the laptop. If this does not lead to the desired result and the device is inoperable, then we check it further on another PC. If it doesn’t work here, then most likely it has completely failed. Experience shows that it is better to buy a new one than to repair an old one.

The exception in this case is wireless manipulators. The batteries may be low and need to be replaced. But if, when connected to another computer, the mouse still works, then the problem is in your mobile PC, and the mouse itself is working.

Checking ports

If on a laptop, then you also need to check the computer ports. Typically, these are connected to a square USB port. There are several of them on the laptop. It is enough to connect the manipulator to another such connector and check the presence or absence of the result. If the mouse works, then there is a problem with the port. In this case, it makes sense to take the mobile PC to a service center, where the faulty port will be replaced using specialized equipment.

Checking drivers

Incorrect software settings can lead to the fact that you notice that the mouse does not work well when moving, for example). In this case, we proceed as follows and use only the touchpad):

1. We go to “Start”.
2. Select “Control Panel” in it.
3. Here we find “Device Manager” and open it by double-clicking the manipulator.
4. In the window that opens, find the item that contains the word “Mouse” (there is only one there) and open it.
5. Here you need to find the abbreviation “HID”. Select it and delete it.
6. Then click the “Update configuration” button - a drawing of a PC under a magnifying glass (located at the top of the window, under the main menu, on the toolbar).
7. After the search, the system will notify you that a new device has been found and it has been installed successfully.
8. A similar manipulation in this window must be done with USB port drivers (before this stage, you need to find the driver on the controller of this bus - it can be on the disk that came with the kit, or on the manufacturer’s official website).

If the manipulations carried out did not produce results, go to the “Control Panel” in the previously described way and find the “Mouse” item there. Open it and check that the device is working correctly. In this case, there is even an opportunity to check the result. If this did not help, and the mouse on the laptop still does not work, then the malfunction is serious, and you simply cannot do without the help of a specialist in such a situation. It makes sense to contact the service center for help after this. You may have to reconfigure the registry or even reinstall the operating system.

Conclusion

If it’s on a laptop, then there’s no need to panic. Nothing bad happened. Your mobile PC is mostly functional and can successfully perform the functions assigned to it. By following the previously stated instructions, you can find out the cause of the malfunction and try to eliminate it. As a last resort, if the desired result is not achieved, you can contact a service center, where highly qualified specialists will finally solve this problem.

Welcome, dear visitors of our website. We present the next publication from our computer technical support portal. This time we will talk about problems with wireless touch devices - computer mice.

And since you are on this page of our website, you are most likely experiencing a problem with the performance of this everyday assistant and want to know the solution to this problem. So why doesn't my wireless mouse work? There are several reasons for this. But before we move directly to listing them, we advise you to read the general article about if you have. Surely it will be useful.

If your wireless mouse stops working

1. If your wireless mouse stops working, the first thing that comes to mind is that your wireless mouse has run out of batteries. Moreover, even if the batteries are not completely discharged, but slightly weak, this does not guarantee the operation of the mouse. In this case, it’s easier to change the batteries, or even better, install batteries - they’re easier to check and won’t cost you so much.
2. The second thing that can happen to a wireless mouse is that it simply freezes. To revive it, you need to press a special button located at the bottom of the mouse. Usually after this the cursor immediately starts moving.
3. The third reason why a wireless mouse does not work is in the signal receiving unit. It can be fixed, or you can plug it into another USB port just to be sure.
4. The last reason is the most unpleasant. The wireless mouse just broke. It is better to check the reliability of this assumption on another computer.

And finally. Before you test all these theories, reboot your computer. Sometimes it helps.