Setting up GS 8306 latest firmware. Tricolor TV receiver firmware for free viewing

Click! gs 8306 after update, repair!

Gs 8306 stopped turning on completely after the update. Maybe both LEDs on the display are lit and then the receiver hangs. All this suggests that the receiver has lost its boot sectors and simply broken down. If, as a result of the diagnostics, it is confirmed that the problem is in flash memory, then we carry out a procedure to restore our receiver to working condition.

We disassemble the receiver and prepare our main board for repair.

gs 8306 stopped turning on after the update.

If necessary, we clean the main board from dust and other contaminants.

We are repairing Gs 8306.

We take flux and apply it to the contacts of the microcircuit. All contacts must be covered so that it would be easier to remove our microcircuit from the main board.

Gs 8306 remove the flash drive.

We turn on the soldering station, take a hairdryer and begin to warm up the element that we need to remove. In this repair we are interested in W25Q128BV.

W25Q128BV programming

After we have removed the chip from the main board, we begin programming. To do this, we need a programmer and a corresponding socket - adapter.

Repair of W25Q128BV on 8306.

We insert it into the programmer and turn on the program. Let's see if the device recognizes our flash drive.

programming W25Q128BV on chipprog 48

If everything is in order and the contact is good, then you can upload a new dump into the chip’s memory. ChipProg-48 during operation will show what state it is in; if there is an error, the red indicator will light up.

ChipProg-48 programming 8306

After everything has been flashed, we mount the microcircuit on the board. First we apply flux.

We do 8306 after an unsuccessful update.

When everything is soldered, wait until everything cools down. Take the front panel and connect the power. Our receiver is starting to work! We check our receiver in all modes.

If you still have questions, you can watch our video, in which we showed everything clearly! The main thing is to remember, if you are not confident in your abilities, then take the broken receiver to a service center!

Each company always strives to improve the quality of the equipment and content provided through technical updates. This is no exception for receivers (set-top boxes), so they can also be updated for better performance.

How to update

The current firmware version for the Tricolor GS 8306 receiver is 1.9.160, which was released in the last quarter of last year and continues to be valid in 2017. With each new update, the operation of the GS 8306 Tricolor moves to a new, higher level.

For firmware you need:

Never turn off the set-top box while updating the software;
the update takes about twenty minutes in two stages, during which it will automatically update itself;
follow the step-by-step instructions to avoid technical errors that can lead to damage to the receiver and forced reflashing.

Step-by-step update procedure (all steps must be followed carefully):

Search for channels manually, through the item in the Tricolor TV menu.
After this, be sure to turn off the receiver cable from the power supply and turn it back on after a few minutes.
Turn on the information channel on the TV under No. 333.
On the screen you should see an information alert that a new version is available and an offer to update.
Using the remote control, select the “Yes” option, after which a new window will open with the firmware process and service messages about it.
At the end of the first stage, the receiver will reboot itself, after which the second part of the update will begin.
After the second part, you will see a window signaling that the update has been completed and the need to set the data (operating language, time), and also search for channels again.
As a result, you can personally go to the setup wizard to make sure that the equipment has been updated and is ready for full operation again.

Equipment upgrades brought new opportunities in the field of satellite television. Firstly, there is a new and modern graphical interface for the Stingray software. Secondly, the stability of the receiver has improved significantly. The automatic channel search has also been joined by a manual option. A pleasant moment also affected the special application “Tricolor TV Cinemas”, which was also updated and improved.

For those interested, the option is also available to update the Tricolor TV set-top box GS 8306 using USB flash drive. To do this, you need to move the files necessary for the process, connect it to the receiver and perform the update. In addition, its completion will be indicated by two LEDs that will go out for a while.

Possible problems after the firmware

At first, after the update, there was a stage when many people complained about technical errors in their receivers, which they noticed precisely after updating the firmware to the newest version. The company itself did not recommend updating until they themselves corrected the released update.

However, there were those who managed to do this, and they were divided into two parts:

those for whom everything worked properly;
and those who, due to the transition to a new version of the software update, received a large number of problems with their equipment.

There were several solutions for this. For example, contact the service center for qualified assistance to change the firmware version. This was considered the most optimal option, because the client does not need to change anything himself, and the company does not need to replace old equipment with new one due to its own mistake. The second version was not so good, because customers had to wait for the update version to be corrected and reflash the receiver themselves according to the scheme. And the most difficult option was the one in which people themselves could roll back the update version at home. However, it was practically not recommended, because for this the user must have special equipment (a blowtorch and a programmer) and a material and technical knowledge base of how to flash, so as not to make critical mistakes during the procedure.

To enjoy watching TV in peace and not worry about possible problems, you should use only the most modern, best equipment. But progress is developing at such a rapid pace that even recently acquired equipment almost immediately begins to lag behind existing requirements. Therefore, in order not to spend extra money on purchasing new devices, you should simply update the software of old ones in a timely manner. An excellent option for keeping receivers up to date is the Tricolor gs 8306 firmware. But you should remember that professionals must update the software, since any error can make the receiver inoperable.

Any update has several important goals:

removing existing errors and combating existing system failures;
introduction of a more convenient, functional and friendly interface;
connection of additional options and services;
reconfiguring equipment for proper operation of programs;
keeping equipment up to date.

Moreover, in 2019, the firmware is updated both at the request of the user and at the initiative of the television company.

You can find out about the possibility of updating your receiver on the provider’s official website or from an information message on the TV screen. Other sources of information are also possible, since you can learn about software improvements from news on various sites, conversations with friends, and recommendations from specialists.

GS 7300 firmware for free viewing Tricolor

Those who have already decided to reflash the receiver themselves for free viewing and high-quality signal reception should choose one of the currently existing options:

installing the program using a bootable flash card;
automatic update of the receiver.

It should be remembered that, regardless of the option chosen, users are required to be careful and careful not to find themselves in an unpleasant situation.

A suddenly interrupted update or incorrect, thoughtless actions will lead to equipment breakdown and loss of the right to warranty service. It will be almost impossible to fix the damage, and repair costs will be close to the cost of a new receiver.

Gi hd mini firmware for Tricolor without card 2019

To update the receiver software without a card and unnecessary worries. You should download the appropriate program. It can be found on many third-party sites that offer users various programs and drivers. If the program is already ready, all that remains is:

format the flash card by installing the FAT 32 file system on it;
transfer the program to it (it is not permissible to change the file name, it is necessary);
insert the flash drive into the USB port;
turn the receiver on and off;
after switching on, the automatic update process will begin;
you must wait for the process to complete;
and carry out the setup, indicating the basic parameters for using the device
reboot the receiver.

This completes the procedure and you can start using the updated equipment.

It should be noted that it is impossible to cancel the firmware, so you need to download the program with extreme caution, since the quality of the equipment depends on it.

Firmware for GS 8306 Tricolor

If searching for an update on third-party resources seems difficult, and you cannot get to the official firmware website created specifically for Tricolor, you should wait until the system decides to update itself. For this you will need:

disconnect the receiver from the network;
turn on the receiver again;
enable the provider's information channel;
wait until the question about updating the software appears;
agree with the installation;
wait for the process to complete;
configure the equipment.

Please note that it is unacceptable to turn off the device during installation, as this will lead to irreparable malfunctions. The result of an interrupted download will be the absence of any working program that would allow the use of the device.

Additionally, it should be noted that if there is no system message (about the start of the update) within 5 minutes after turning on, you should reset the settings to factory settings and repeat the process.

How to flash a Tricolor card for free viewing

Despite the simplicity of the process, it is better to entrust the firmware to professionals, so as not to find yourself in a situation where the desired freebie will result in unexpected additional costs. But, if you make a firm decision to update yourself, you need to pay attention to the correctness of the selected program, since different brands of receivers require the use of different drivers.

Additionally, it should be mentioned that there is a third setup option that involves using a computer. But it requires the purchase of a special cable that allows you to connect a PC to the receiver, so it is better not to overpay and immediately contact specialists who guarantee high-quality results.

It is difficult to imagine a person who would voluntarily give up the opportunity to save money. Trying to avoid payment, users constantly come up with new loopholes and solutions. And one of the most popular saving methods is the firmware for free viewing of Tricolor for gs 7300 and other receiver models.

Typically, updating equipment means installing the update required by the provider. It allows customers to take advantage of additional features and significantly enhances the user experience. Moreover, sometimes an outdated version of the equipment causes problems, since high-quality broadcasting requires the appropriate level of technology.

But when it comes to firmware for watching free TV, talking about updates is pointless. In this case, we are talking about a complete replacement of the set-top box software. Therefore, when making decisions to make changes, it is worth remembering the irreversibility of such actions.

Free Tricolor TV firmware for viewing

In general, the process of flashing the Tricolor receiver contains only a few steps:

first the user must download the file;
then you will need to prepare the equipment;
and install the program.

There is no need to do anything additional. But it is worth considering the possible consequences of the described actions:

breakage of the set-top box in case of an error;
termination of service by the provider if it detects a violation of the contract;
impossibility of obtaining warranty service, since changes to the software unplanned by the satellite company make the contract invalid.

It is important to emphasize that most often subscribers encounter the first problem, since any mistake they make (even the most insignificant) will lead to irreversible consequences.

Firmware GS 8300n (GS 8***) for free viewing Tricolor

First of all, to flash the Tricolor TV gs 8306 firmware from a flash drive, you will need to download the appropriate file. If it is already ready, all that remains is:

write the downloaded program to a memory card;
insert the flash drive into the USB port of the receiver;
turn off the receiver;
restart the equipment;
wait for the download of the prepared software to automatically start;
just wait until the installation of fresh files is completed;
after completing the process, set the starting parameters for the operation of the equipment (time zone, city and other similar settings);
save the changes made;
reboot the console.

It is important to emphasize that during installation of programs you should never turn off the equipment. No attempts to influence what is happening are allowed, since if the process is interrupted, the receiver will be damaged, and its restoration will only be possible in a service center. However, it will certainly be paid for the reasons already mentioned above.

Preparing for a firmware update

As such, no preparation is required to install the software yourself. The only nuance that you need to pay attention to is the flash drive.

To write the resulting file to it, you will need:

format the memory card;
set FAT32 as the file system used;
use a special recording program to load the software in order to get a bootable flash drive, and not a set of files.

It is worth adding that in this case it is also important to wait until the process is completely completed, so as not to encounter difficulties later.

How to flash a Tricolor TV card to watch channels for free

People who are thinking about making changes to the map should immediately abandon such an idea. Only an update is available for the GS 8307 receiver, the latest firmware of which will improve the quality of broadcasts or improve other set-top boxes. But it is impossible to change or update the card in 2018. Moreover, any scratch, not to mention more serious damage, will render it unusable, and therefore you should not even try to make changes to it. Moreover, not a single way to achieve success in this senseless business has been invented.

Where can I download free Tricolor TV firmware

There is no single, permanent place where you can find and download a program to watch channels for free. This is due to the actions of the provider, which is trying to monitor vulnerabilities and combat unauthorized access to its own broadcasting. Therefore, it is much wiser not to look for workarounds, but simply pay for one of the packages and calmly watch your favorite programs. But, if you cannot do without installing additional software, you should visit specialized forums to download it, where experienced users share their experiences and secrets.

The signal from the Tricolor TV operator is transmitted to the TV screen through receivers. These receivers are designed to decode satellite signals. Their correct operation depends not only on the serviceability of the equipment, but also on the software, which must be updated periodically.

And since the most popular receiver is the GS 8306 for Tricolor TV, it is worth considering in more detail, as well as the process of updating the software on it.

Receiver

The Tricolor GS 8306 receiver began selling back in 2012, but even years later it remains one of the most frequently purchased devices. It provides high broadcast quality, makes it possible to connect different TV models, and also supports all operator options and packages, including packages, and others.

Regarding the advantages, users highlight the following:

Easy to repair;
Low power consumption.

There were also some drawbacks:

It may be difficult to identify TVs connected to the receiver, resulting in manual setup;
No digital screen;
You cannot connect to other operators.

Software Update

As with other gadgets, the GS 8306 firmware needs to be updated periodically. This is required to achieve the following goals:

Elimination of possible problems with past collateral.
Achieving maximum efficiency of equipment operation.
Adding new codes and functions to the system.
Inspection of old software for errors, etc.
Improved user experience.

If you do not update the GS 8306 Tricolor TV receiver, this may lead to interference in the broadcast, and they will begin to occur more often. Therefore, updating the GS 8306 firmware is mandatory if the system indicates that new software is available for the receiver.

Execution of work

You can install new software in one of 2 ways.

By connecting to a satellite;
Using a distribution package previously downloaded to a flash card.

Satellite

On the one hand, this option is simpler for the average Tricolor TV client. On the other hand, difficulties arise noticeably more often during the update process.

In this case, updating the GS 8306 Tricolor TV firmware should be done according to the instructions.

Perform a new search for channels and save them;
Remove the plug from the socket and plug it in again, thus turning off the receiver and then turning it on again.
Turn on channel 333;
Wait a little while the receiver checks for a software update - the software version will also be noted in the pop-up message;
Click on the “Yes” icon;
Wait for the download to complete;
Wait for stage II update to complete;
Wait until the receiver reboots;
When the receiver reboots, the Setup Wizard will appear on the TV screen - you need to select the region, language, operator and set the time;
Find the channels again.

At this point, the independent update of the GS 8306 Tricolor TV firmware from satellite is completed and the new software will be reflected in the “Status” tab.

Note! During the software update process, it is prohibited to turn off or restart the receiver. Otherwise, the update may be incomplete and you will not be able to view channels.

Distribution from flash card

To update the receiver, you will first need to find out the latest software version, and then activate the search for update availability.

It is on it that there is official software for the receiver, and therefore it is necessary to download it from here.

The software must be downloaded to a flash card in the root directory. The flash drive must be formatted in FAT32.

Note! It is not acceptable to change file names.

After turning on the receiver, you need to look at the LEDs around the power button that light up. Both LEDs should start flashing, after which one of them will go out, while the top one will remain on. In the future, the upper one will light up, while the lower one will blink. This means that the update process is happening right now.

Note! You need to keep an eye on the indicators, since nothing will be displayed on the TV screen.

The duration of the GS 8306 Tricolor TV software update is about 5 minutes. You need to wait until both LEDs go out. When this happens, it is recommended to wait 10-20 seconds. and only then remove the flash card.

All that remains is to unplug the receiver from the socket, and then, after 15 seconds, plug it back in.

Afterwards, the installed software will be displayed in the menu.

IMPORTANT! The GS 8306 Tricolor TV receiver will not be able to return the previous software if a new one is installed.

As you can see, updating the firmware of the GS 8306 Tricolor TV receiver is not difficult. You just need to follow the instructions.