What is the security code for Nokia. How to unlock a Nokia phone using IMEI code. Nokia MasterCode Calculator – phone security code calculator. How to find out the security code on a Nokia phone

Many people wonder what to do if they forgot the factory Nokia password on their phone? In this post we will tell you everything and provide all possible password variations.

If you do not have a push-button phone, then look. Attention: after entering the password, all data will be deleted! Default security password: 12345, 0000 for most Nokia phones. If the listed options do not suit you, try another Nokia password: 00000000 (8 zeros) 1234, 00000. Also, we may not have indicated all the options, if you know others, share them in the comments. If this article helped you, share it with your friends.

This method resets your phone to factory settings. Attention! You do this at your own peril and risk! Remove the SIM card and memory card from the phone before resetting. All data from your Nokia phone (contact book, photos, messages, programs, games, files) will be lost! Please make a backup if you can!

On push-button phones, the default reset code is * # 7780 #, after entering this code, enter the password 12345. (Does not work on all models). Also try to enter the code: *#7370# or *#62209526#, to reset to default, Nokia password will become 12345.

Important: Nokia® 2760/3555/5310/5610/6263/6301/7510 phones do not have a default security password. When performing a function that requires a security password, you must create one.

When setting the security password, it is highly recommended that it be set to 12345. This allows you to have a “default” security password programmed into your Nokia phone. If you prefer a different Nokia password, please save it for future use.

Can't create / don't know the security password

Please read the following information:

Default security code 12345 for most Nokia phones.
If you enter the wrong security code five times in a row, the phone will continue to attempt to enter the code.
Wait five minutes and enter the code again.
Please note that there is no approved master security code generator available currently from Nokia.

How to unlock your Nokia password if you forgot it?

To unlock access to your phone if you have forgotten your Nokia phone password (not SIM password). Simply enter the IMEI (serial number) number for your phone below to calculate the master code to grant you access.

Please note that this is not a network unlock code.

Does not work on all Nokia models. Note – Use this entirely at your own risk. We are not responsible for any damage to your phone or loss of data on your phone or computer.

Nokia Security Password Unlock Procedure:

Connect your phone via USB cable in PC mode and install the drivers for your cell phone included in the Nokia pc package, then exit the pc package.
Then install
Select USB virtual drive during installation (in case of Nokia 6120c) (for Nokia 5700 use diamond protection)
After installation, open it
Click the scan button. Then click on phone information
Click on scan
Click on the persistent memory tab given at the bottom of the application. Press to read
It will read the persistent memory file and write it to disk
Your pm file will be in the path:
C:\program files\nss\backup\pm\356252 *********. Pm
Open pm file in notepad
Now scroll the list to the field, and the 5th entry has the security code saved
Find something like 5 = 31313131310000000000
Remove all the digits "3" and it will look like this:
5 = 11111 0000000000 now the first five digits are the code “11111”.

When should you update your Nokia phone's firmware?

Despite the fact that all phones Nokia appear on the market with fairly well-produced firmware; after some time, malfunctions cannot be ruled out.

Unfortunately, it is not always possible to find signs of a failure right away. This can often be found out after a complete diagnosis of the device. Only based on its results will it be possible to accurately answer whether it is necessary in a given situation Nokia firmware or not. We will certainly help solve this problem.

When is it worth updating Nokia firmware?

Flashing Nokia required when the phone malfunctions, it slows down, glitches, etc. This happens if the software on your cell phone is not working properly. We will help you solve this problem. Before flashing the firmware, you can revive your phone without the help of others. First, delete all information from Nokia and reset options. This will be almost equivalent to flashing the firmware and, most likely, the faults will disappear and the device will not malfunction. If this does not help, then you need to contact our service center for help.

You shouldn't flash it when Nokia works correctly and everything works fine. If your mobile works great and doesn’t slow down, you shouldn’t upgrade the firmware, because it won’t help make your mobile work better. Not enough, you won't feel any difference. In 99% of cases, brand new firmware does nothing. It is very difficult to do this without the help of others. Not much more, you can simply destroy your cell phone.

Russification of Nokia This is also carried out in our service center.

How to find out the security code on a Nokia phone

Download program

How to find out the security code for a Nokia phone

Wanting to protect their device from prying eyes, owners often block it by entering a certain code. Happens when he accidentally I forgot the security code for my Nokia phone.. If this trouble happened to you and it says on the screen that unlocked Nokia - quite a sad story, since you will not be able to continue further exploitation.

Then the question becomes relevant, How to find out the Nokia lock security code? How to unlock a locked Nokia? You can clarify this information using the electronic service or during a telephone consultation.

Removing Nokia security lock code - a rather complex process that requires special knowledge.

Nokia requires security code only if the user installed it himself. How to unlock Nokia security code? The answer to this question will be given to you in our service center. Most likely, you will need to update the firmware of your mobile phone. We will also advise How to remove Nokia lock code.

We can unlock nokia two ways : reflash or remove the code using a programmer.

Unlocking Nokia - For our specialists, this is a common task that does not require much time.

Quite often it happens that a user can only use his mobile on one network. When replacing the SIM card, the cell phone does not work. In this case you will need Nokia unlock. Self-unlocking is not possible, since today there are no freely available programs. We do this using special equipment.

Example from life:

The man put the code on his phone and forgot it the next day. Nokia is blocked, what should I do? It became completely impossible to work. Without much hesitation, he went to our service center, where, after diagnosing the technician, they carried out Nokia code removal. This process didn't take long.

At our service center:

— diagnostics are completely free and in most cases are carried out in front of the client using professional equipment;

— after repair, the warranty is issued for the entire device, and not just for the replaced part;

— after repair, the device undergoes free quality control;

— permanent discounts on repairs;

— only original spare parts;

— after the first repair you are given a VIP client card for a discount of 10%-40%

Promotion! Until the end of the month, ultrasonic cleaning is free for any repair.

The best service conditions are only in our service!

This article presents everything related to secret codes and more for Nokia mobile devices, such as smartphones and feature phones. We hope that the information will be useful to users, since the article contains the most popular and most frequently used codes that are required in everyday life when working with mobile devices.

Attention!!! You do all the following actions at your own peril and risk! The author of the publication does not bear any responsibility for your actions!

*#0000# - the version number will be shown on the display:

V 5.16- software version
22-06-99 - date
NSM-1- equipment code (model)

*#06# - IMEI number will be displayed on the display:

SimClock (Allows you to check whether your SIM card supports StopClock mode. When you switch the card to this mode, power consumption is noticeably reduced and battery life increases accordingly. As a rule, all modern SIM cards support this mode.)
SIM Clock
Stop allowed

Warranty codes

*#92702689# [*#war0anty#]
Enter the warranty codes menu. You don't actually need them, but you can view them using the menu scroll arrows.
Menu:
1. Shows the serial number of the device
2. Date and year of production (for example, 0299)
3. Shows month and year of sale (if installed). Here you can set the date, but be careful - this can only be done once in the life of the phone.
4. Date of last repair (if any).
6. Transfers all phone numbers, pictures and calls from one phone to another (possibly for recovery purposes). In models with an infrared port, this procedure also works through it.

EFR CODEC (Enhanced Full Rate)
This feature, when enabled, should, in theory, significantly improve the quality of transmitted speech, but, unfortunately, it must be supported by the cellular operator. When it works, the phone's power consumption during talk time increases slightly (about 5%). As far as I know, none of the Russian mobile operators support this function. The principle is based on a different speech compression algorithm (ACELP) and occupies a wider frequency band.
Dial *3370# to enable (the phone must reboot) or #3370# to disable this feature.

HR CODEC (Half Rate)
Significantly degrades speech quality, but saves battery by about 30%. Again, must be supported by your cellular operator. I don’t know of any Russian networks that support this function.
Dial *4720# to turn on (the phone must reboot)
or #4720# to disable this feature.

"Secret" of the "Power" button(61хх, 7110)
If you briefly press the power button on your phone, you will be taken to the “quick change” mode of profiles (user settings). A very convenient feature that I personally use often. It was “documented” in the 7110 model.

"Secret" 54#
If you use the SIM card memory to store an address book, then knowing exactly the address of the phone number in memory (the cell number in the SIM card) you can quickly extract the required number into the device’s dialing buffer. Simply dial the cell number (for example, 6) and press # (pound). The number will immediately appear on your display.

Error in microcode (61xx)
This error does not lead to any serious consequences and will never happen during normal use of the phone “for its intended purpose.” Here is the sequence of actions in which it manifests itself - the phone simply reboots.
1. Enter Calendar (Menu-8)
2. Write a note or reminder
3. Enter some text in the editing window
4. Press and hold the Clear button until the text is cleared, then press Back.
5. Press 0. You will be returned to the main screen, but a space will appear on the screen (which you won't see, of course).
6. Dial any 4 numbers (for example, 1234).
7. Using the arrow keys, move the cursor to the beginning of this line of numbers (press the down arrow 2 times).
8. Now enter any 6 more numbers and press Send (green tube).
9. Wait a few seconds. The phone will start flashing the key and display lights and will eventually reboot.

Network Monitor (61xx)
This is the hidden menu in your Nokia phone. If you want to activate this menu, you must use a program that will reprogram some chips in your phone.
For example, a network monitor in Nokia 6110:
1. Check your software version. You can ONLY continue if you have 4.33, 4.73 or 5.24!
2. Dismantle the EEprom.
3. Select EEProm (ATMEL B 24C64) in the program.
4. Read data from EEProm and save and backup.
5. If you have v4.33, or 4.73 then change the address 03B8 from 00 to FF.
6. If you have v5-24 then change 0378 from 00 to FF.
7. Write new data to the EEProm, and solder it back into the portable phone.
8. Turn on your phone and you will see a new menu 10.
Network Monitor gives you the following information:
Number (number) of the Courier (transport)
PKc level in dBM
Received signal quality C1 (track loss criterion used for cell selection and reselection). Range --99 to 99
RLT (Radio Link Break)
Lost time Information regarding network parameters
TMSI (Temporary Mobile Subscriber Identity)
Cell Identification (CELL ID, number (number) of the cell used)
MCC (Mobile Country Code)
MNC (Mobile Network Code)
LAC (Location Area Code)
Ciphering (on/off)
Hopping (on/off)
DTX (on/off)

Your business card on display:
· Change the menu (Menu 2-7-2-1) of your supplier to anything you want (3 characters maximum)
· Set the telephone cost unit (Menu 2-7-2-1) to 1
· Enter the cost limit (Menu 2-7-1-1) similar to your phone number
· Change one profile (Menu 3-...-3) to your name

How to get new ring tones:
Dial SMSC (center number) +358405202999
Send an SMS with the word: TONES
Send this to 99999
When you receive a response (this will be in the promotion language), you will receive a list of melodies.
Having chosen one, send it to the same number.
After a while YOU will receive a melody.
You can edit the melody and then enter it into the phone's memory!
If it works, it should write New ringtone received.

Check, activate or remove card restrictions
· Enter *pw+1234567890+1 - Provider-Lock status
· Press (print) *pw+1234567890+2 - Network-Lock status
· Press (print) *pw+1234567890+3 - Provider(???)-Lock status
· Press (print) *pw+1234567890+4 - SimCard-Lock status
· 1234567890 (master code) - 10 ten-digit code, depending on IMEI

Police radar.(NOKIA 5110/6110/6150/8850)
To detect police radar, follow these steps:
Settings -"
Secret settings -"
Group -"
Activate and enter code 00000 then press OK
Now a new icon will appear on your display, this now means that if within a radius of 1 km. there will be a radar, the phone will notify you about it by beeping (like SMS)
This does not work in some countries!

Delete Menu
The only way to remove the menu is to select the factory reset menu. When asked, enter your security code (default is 12345). Doing this will get rid of the menu, but will also remove received ringtones.

SP-Lock directly from the phone menu
1) Insert a card from another operator.
2) Turn on the phone and hold the volume up button for more than 3 seconds.
then release and your phone will ask for PIN code?
3) Press the "C" button
4) Then press the * button and 04*PIN*PIN*PIN# as many times as possible
The phone will write PIN code changed.
Now turn off and turn on the phone again. He will accept the card.

“Floor price” mode
If you activate the “Half Price” mode, you reduce the sound quality and incoming and outgoing traffic (the amount of information transferred). This allows the operator to place more subscribers on the same network.
You can get a discount on service from the operator up to 30%.
This is true in Europe.
*4720# - Activation of the “Half price” mode
#4720# - Disabling the “Half price” mode
The “Half Price” mode changes after rebooting the device.
This feature is disabled in recent phone models.
Unlocking your phone.
Quite often, providers “link” mobile phones to their SIM cards. If the phone is “tied” to a specific operator, it becomes impossible to change the provider by simply replacing the SIM card. The phone will refuse to work with another operator. You will have to deregister your phone with the previous operator and register with the new one. Most likely, both for money. Even if they are small, it’s still a shame.
In order to “unlink” your phone yourself, you must know the “Master Code”. This is a ten-digit number that is unique to each phone. First, check whether your phone is tied to a specific operator or not. To do this, instead of the real “Master Code”, you can dial any ten-digit number, for example: 0123456789.
Command to determine the phone binding status:
#pw+0123456789+1#

(the symbols “p”, “w” and “+” are on the “*” button)
All Nokia phone models starting from 2110 have 4 levels of SIM binding.
The unlock command in general looks like this:
#pw+(Master Code)+№#

Using the commands of this family, you can check, unbind or activate the binding of your phone to an operator.
"No" is the number 1,2,3 or 4 - determines the blocking level you want to work with.
#pw+0123456789+1# - binding to the operator
#pw+0123456789+2# - network connection
#pw+0123456789+3# - binding to the network and operator
#pw+01234567890+4# - binding to a specific SIM card
Instead of dialing 0123456789, you must use the Master Code, which the phone seller must tell you.

To unbind to an operator you will need to dial:
#pw+(Master Code)+1#

Unlocking your phone - 2
If you have a Nokia phone of the 16xx, 21xx, 31xx, 51xx or 81xx model series, you can unlink the SIM to the operator when you turn on the phone.

For this:
1. Insert the SIM card of the new operator
2. Press and hold the UP VOLUME button for 3 seconds
3. Release the button. The PIN CODE ? prompt appears.
4. Press button "C".
5. Press the “*” button and hold until it flashes.
6. Repeat step 5
7. Enter 04*
8. *
9. *
10. #

A message appears: PIN CODE CHANGED (or ACCEPTED).
The link to the previous operator will be removed and the new operator’s card will be activated. The binding will be removed only for the current session, i.e. if you turn off the phone and then turn it on, you will have to repeat the entire procedure again, from steps one to ten.
Attention: Starting from software version 5.04, Nokia has removed this feature. You will either have to shell out money to change the operator, or use the previous advice.
Security code for Nokia
Factory standard security code 12345
Enabling the Hands Free menu
If you short-circuit pins 1 and 2, the word "Headset" should appear. Now you have access to menu 3-6.
Enable car menu
1.Short circuit pins 2 and 3 for a few seconds and you should see the word "Car"
2.Now you have access to menu 3-7

Blocking with 4 types of locks:

1. SPROVIDER-LOCK - 1
2. NETWORK-LOCK - 2
3. COUNTRY-LOCK - 3
4. SIMCARD-LOCK - 4
To check the status of these locks, enter the following line:
#pw+(MASTERCODE)+(y)#, where
- p = press * 3 times
- w = press * 4 times (in the original, on the contrary, w - 3 times, p - 4)
- + = press * 2 times
- MASTERCODE = exactly the thing that was locked into your device. But to check the status, enter 1234567890
- y = number from 1 to 4
Example: #pw+1234567890+1# - the phone should display status information SPLOCK *#67705646# Removes the operator logo

Speed dialing messages

When you type a message, you must wait a few seconds if you want to type two identical letters in a row. For example, when typing the word "letter", you must wait before entering the second letter "t"..
It will be much faster if you press the # key twice and then "t".
The Service provider (SP) lock mode is used to bind the phone to a specific SiM card. Moreover, if you insert a SIM card from another operator, the phone will refuse to work, but another card from the same operator will work.
All Nokia phones (2110 and above) have four different linking modes that can be used to link cards with four different operators. But most phones only have one activated. (lock 1)

The main code used in Nokia phones:

#pw+(master code)+Y#ї
This code is used to check, activate and unbind the SIM card (SP-lock).
Use the * key to type p, + and w characters.
"Y" can be 1,2,3 or 4 - depending on what type of binding you choose.
#pw+1234567890+1# for Provider-Lock status
#pw+1234567890+2# for Network-Lock status
#pw+1234567890+3# for Provider(???)-Lock status
#pw+1234567890+4# for SimCard-Lock status
(Master code) a ten-digit number based on the IMEI number of the phone.
To unbind by type 1, enter the following code:
#pw+(master code)+1#ї

If you just want to check your phone, use any ten-digit number instead of the master code, for example 1234567890

Security code Information in IMEI (International Mobile Equipment Identity) contains:

XXXXXX XX XXXXXX X
TAC FAC SNR SP
TAC = Type Approval Code (first 2 digits = country code)
FAC = Final Assembly Code (For Nokia FAC=10)
SNR = Serial Number
SP = Spare (always SP=0)

*#2820# - a unique address of the Bluetooth module of your device (may be needed by other devices that cannot display names).

*#7370925538# - cleaning the “Wallet” (for 6600 and higher - which have a “Wallet”).

Forwarding:

##002# - Cancel all redirects.
**004*number#- Enable forwarding of all calls to the number...
##004# - Re-register all forwardings (no answer, no reception, busy).
**21*number#- Immediate forwarding of all calls and activation.
*21# - Activate immediate forwarding.
#21# - Disable immediate forwarding of all calls.
*#21# - Check the forwarding status of all calls.
**61*number#- Activate call forwarding to a number if there is no answer.
*61# - Activate forwarding if there is no answer.
#61# - Disable forwarding if there is no answer.
*#61# - Check the forwarding status if there is no response.
**62*number#- Activate call forwarding to a number if outside the reception area.
*62# - Activate forwarding if out of range.
##62# - Re-register call forwarding if out of zone.
#62# - Disable forwarding if outside the zone.
*#62# - Check the forwarding status if outside the zone.

For many years now, a mobile phone has been viewed not as an expensive toy, but as an essential thing in everyday life. And therefore, any malfunction of the device can not only cause negative emotions in the owner, but also cause disruption to the work process, etc., and this is no longer a joke. No one, even the coolest brands and models, is immune from such misunderstandings.

Internet 2 Switch status to On. Zoom in or out Two fingers on the screen. which may result in data traffic. but you don't have access? Unless you have purchased a fixed price plan from your network service provider. you need to connect to the Internet. you can enter a password to connect. Besides. Contact your network service provider. Select. double tap the screen. Select Add website to your preferences If you always visit the same sites. touch the screen again.

Select Close File. To make the image smaller. which requires passwords. Select "Archive" - this is a memory location used for temporary storage of data. Select Tip: Also. what you are viewing on the site. empty archive after each use. Messages and emails About sending messages.

For example, the mobile phone was stuck on lock: the security code was forgotten or they didn’t know it at all, if the phone was second-hand, bought second-hand, and the new owner did not bother to ask for the necessary numbers. The company is known and loved by many Nokia. How to remove Nokia lock code? People who have encountered a similar problem know that the problem is fixable, although sometimes you have to tinker.

Messages and conversations between you and a specific contact are organized into conversations. You can send text messages longer than the number of characters assigned to one message. Longer messages will be sent as two or more messages. Your service provider may charge you a fee. Characters that use accents, other characters, and language variations take up more space, limiting the number of characters that can be sent in a single message. Using services or downloading content may involve the transfer of large amounts of data, which may result in traffic charges.

So, to remove Nokia lock code at home, you can use at least two options.

Option one: the “scientific” poking method.

If the mobile phone turns on, it should be connected to the computer via PC Suite. Then it will be possible to remove the Nokia security code if it is requested immediately after turning on the device.
You should download the JAF Setup utility; the drivers for it will fit from any boot disk from Nokia.
Turn on the phone, find what its resistance is. It may vary for different models.
Next you will need two small, 30 centimeters each, wires and two ordinary sewing needles.
The whole structure is connected in this way: needle, wires, resistance, wires, needle. The sequence must be strict! A power supply of 3.6 to 4 V is connected. The connection is made to the + and - buses, or the BSI contact is isolated from the battery contact. Those 2 needles are inserted between the battery contacts Cnd and BSI. Next, press the power button on the phone. The device itself should not twitch or vibrate so that the needles do not fly out. A few seconds after turning on, the display should indicate with an inscription like “local mode” or “Test mode” that the experiment was a success.
Next, use a USB cable to connect the phone to the computer. The latter should detect Nokia as turned on and working normally. We install drivers through the computer. Next you need to install the JAF program, open it and click “start”.
The next step on how to remove the Nokia lock code is to go to the bb5 tab. There, next to the Read User Code item, check the box and click on Service. When a new dialog box appears, click on the “Read Code” item.
When the operation is completed, the program itself will write the device code to the left of the button
Read Code.

Note: this method is good for mobile phones created on BB5 platforms.

Send a message With text messages and multimedia messages, you can quickly contact friends and family. You can add photos to a multimedia message. Select to add a recipient from your contacts list or enter a phone number. You can add more recipients. Select the message field, then write your message. To add an attachment, select and file.

Messages and email selection. To reply to a message 1 Select the conversation that contains the message. 2 Select a message field, write a reply, and then select. Forward a message 1 Select the conversation that contains the message. 2 Touch and hold a message, then select forward. 3 Select to add a recipient from your contacts list or enter a phone number. 4 Select. Sending a message with attachments may be more expensive than sending a regular text message. For more information, contact your service provider.

Method two: “software”

This method is also used at home, although, naturally, they know how to remove the Nokia lock code in workshops at cellular communication stores. But contacting them costs time and money, and you can do everything yourself quickly and free of charge, which in itself is beneficial.

So, another way to “revive” is using the Mbro USB Nokia Tools Lite program. It is useful if the phone asks for a password before turning on, and therefore cannot be connected to the computer. Then you can try to get the lock code this way:

If an entry entered in a multimedia message is too large for the network, the device can reduce its size automatically. Only devices with compatible features can receive and display multimedia messages. The appearance of the message may vary depending on the receiving device. Send a message to a group of people Do you want to send a message to everyone in your family? If you've created a group that includes them, you can send a text or email to all members at once.

Select a group and text or send an email, then write and send a message. Chat with friends Select. Before you start chatting, set up your chat service. Swipe left, then follow the instructions on your phone. 1 2 Sign in to the chat service if you haven't already. In the People section, select the contact you want to chat with.

The program needs to be installed, unpacked, and launched.
Then connect the phone via PC Suite.
Move the cursor over the button with the microphone and click on it.
In the program window, in the last line there is the very security code that was needed. It should be entered into the phone to check its functionality. And, besides, it’s better to write down the code so that you don’t have to fight with the phone again later.
This method, which tells you how to remove the Nokia lock code, as well as the password, is suitable for those phones that turn on completely. The program itself works on computers that have Winows7 as the operating system. And as phones, respectively, smartphone models Nokia N79 and

In the end, the phone can be formatted if other options do not work. But this is an extreme case. Although, then you can completely update the software, install a different, more interesting operating system, various utilities and ultimately get a new model, even more advanced - as long as the filling “pull”, i.e. "insides" of a mobile phone.

You can also chat with a group of people. Messages and email 3 Write a message, then select. Replying to a message in a thread Select a message field, write a reply, and send the message. Delete a session In streams view, select and hold a conversation, then tap Delete. When you send a new message, it is added to the current conversation. If there is no conversation, start it. When you open a received message from the Home screen, the message opens in the conversation.

You can use your phone to read and respond to email while you're traveling. You can also combine mailboxes to see all your emails in a unified inbox. Email messages are organized into conversations.

In cell phones" Nokia"There are several types of blocking: blocking the phone for the operator, blocking the SIM card, and blocking the phone memory. When unlocking the protective code each type must follow a certain sequence of actions to ensure unlocking in case of loss of protective code.

Adding a mailbox You can add multiple mailboxes to your phone. Enter your username and password in the appropriate fields. Deleting a mailbox. Long press on a mailbox and then delete. Zoom in or out. you can choose which mailboxes to merge into a single mailbox. Reading an incoming email You can use your phone to read and reply to an email message. Connect your mailbox 1 From the Home screen. 2 Select 3 From another Inbox. select a mailbox.

Instructions

When the phone is locked " Nokia"under the operator, you should contact the cellular operator under which the phone is locked. This type of blocking exists to prevent the use of the phone in the network of an operator different from the original one. When contacting the operator, request an unlock code that will allow you to talk by inserting another SIM card If you are unable to get the unlock code, you will need to flash it.

In the mailbox. 2 Select 3 From the inbox list. select a mailbox. A single inbox allows you to view all incoming email messages. select an email message. Cancel an Inbox association 1 From the Start screen 48 Messages and email View multiple mailboxes in a unified inbox If you have multiple email accounts. Select the mailboxes for which you want to unlink and unlink.

On the Start screen. select the inboxes you want to associate with it. Place two fingers on the screen and move them towards each other or in opposite directions. Select it. Deleting an email message Open the email message. To reply to an email message 1 Select. On the Start screen. Send an email You can use your phone to record and send email messages and attach files to messages. If the email contains a web address.

To flash your phone, you will need a data cable, drivers and synchronization software, as well as flashing software and the actual firmware you plan to use. Firmware is the software that is responsible for the full functioning of a cell phone. Synchronize your phone with your computer using a data cable, then upload the firmware. Be sure to fully charge the battery before starting the operation, and also copy all personal information to your computer.

To send an email message. Attach file. choose. If the app is not yet downloaded on your phone. To remove a recipient. Saving an attachment Open the attachment. Check the boxes next to your emails. then select. select an answer. 2 Reply only to the sender. Forward Email Select Forward. click to the left of the email you want to delete. then select it after downloading. Delete multiple email messages and mailboxes at the same time. select a mailbox.

When blocking a SIM card, pay attention to the SIM card. It should contain a PIN code and a PACK code. If you have forgotten your PIN code, enter the one indicated on the card. Otherwise, enter the pack code, which will allow you to reset your forgotten PIN and enter a new one. If these attempts fail, contact your operator's service center to get a new duplicate card of your blocked SIM card.

Enter a subject in the Subject: field. select their name or email address and select Remove. Messages and email 47 Open attachment Select an application. to open the address in your phone's web browser. then select. choose. Reading email messages. Why carry a separate camera with you. 3. Take a photo. 1 2 Zoom in or out. you can view your photos and videos on your phone and send them to family and friends. 50 Camera Opening email from the Home screen You can set multiple mailboxes on the Home screen. select a tile.

If your phone is locked, you will need to reset all phone settings, reset the firmware, or reflash the phone. To obtain special codes for settings failure or firmware reset, contact the service center. Please be aware that when using these codes, all your personal data may be erased. To flash your phone, use Step No. 2.

For example. press the camera key. press and hold the camera button halfway down. press the camera key. Focus is locked when the white border stops blinking. you can dedicate one email to work and another to leisure. press the camera button fully. if your phone has everything you need to immortalize your memories? With your camera's camera, you can easily take photos and videos. you can combine multiple mailboxes into a tile. If focus is locked.

Camera About the camera To open the camera. Photos can also be easily accessed via the Internet. Capture To open the camera. Do not move the phone until the image is saved and the camera is ready to shoot again. Besides. you can see if you have received a new email and the number of unread emails. Select Camera Tips. Some tips to get the most out of your phone's camera. Shooting in the foreground Focusing on small objects. such as insects or flowers.

Pin- code is an analogue of a password that is used to authorize the SIM card holder when turning on the mobile phone. The owner is usually given several attempts to enter the security code A. If they were entered incorrectly, the SIM card is blocked. These are the basics of using a mobile phone, which are known to every owner. In addition to pin code and there is another password - Security Mastercode, which blocks access to some functions. Therefore, situations when you need to remove the protective code, are very common.

Use night mode. 51 Shooting Without Using the Camera Key 1 To focus on a specific subject or area. You must zoom in on the camera. Select Shoot in the dark. You want to take better pictures. Tap an item or area on the screen. Photos are stored on the camera roll in the center of the images. until the white border stops flashing. 2 Keep your phone stationary. To open the camera. To open the camera. press the camera key. press the camera key. Enlarge or reduce the image.

Camera To view the photo you just created. Select Capture Moving Objects Are you at a sporting event and want to capture the action with your phone? Use sports mode to take clearer photos of people in motion. To the applications. 1 Select 2 Move the screen with your finger. The stopwatch stops. Watch video. Do not use the flash on people or animals near the device. To change from picture mode to video mode. To start recording. kit.

You will need

Nemesis Service Suite
Nokia Unlocker
Drivers for USB cable version 6.85
Cable CA - 53

Instructions

To remove the protective code(pin- code), do the following (using an example). Go to the menu, select “Tools”, then “Settings”. Select the "Security" - "Phone and SIM" option. In the list of settings that appears, select “Request code and PIN" - disable.

Do not cover the flash when taking pictures. then select. Save location information on photos and videos When you want to know exactly where you took a specific photo or video. you can set your phone to automatically record your location. select or. then select camera photos. To switch between shooting and shooting. it switches to wake mode. such as flash settings. If you do not use the camera for several minutes. Move your finger to the right. press the camera key. scene modes and resolution.

If you purchased a Nokia phone secondhand, over time it may well turn out that some of its functions and settings are blocked by an additional digital password that you do not know. To remove the protective code, go to the website http://nfader.su/. Enter the IMEI of your device in the special field and confirm by checking the box that you are the legal owner of the phone. After clicking the Generate button, you will see the Security Mastercode of your device in a special field.

To reactivate it. select and install. choose. To change the machine settings. its quality may deteriorate. and also capture special moments in the form of video recordings. press the camera key. If you want to save location information on photos when you upload them to a sharing service. Share a photo 1 Take a photo. take a photo. you can upload it to a sharing service. Select. you can write the recipient's name or phone number in the To field.

More efficient management of multimedia files. 3 Select a sharing service. Tag your favorites or organize files in albums. Zoom in or out Two fingers on the screen and move them towards each other or in opposite directions. Photos about Photo Center Photos Select photos. select applications. View photos Select photos. 54 Transferring Videos with Photos 1 Record a video. Not all sharing services support all file formats or high quality videos.

If this does not help, follow the following procedure to find and remove the protective code:
Uninstall the Nokia Connectivity Cable driver and restart your computer and install driver version 6.85. Restart your computer again.
Launch Nokia PC Suite and connect your phone via cable in PC Suite mode. Wait for the phone to be recognized by the program, then close PC Suite, unloading its icon from the system tray around the clock.
Install NSS. When you run it for the first time, you will be prompted: Please select from the following Service device you will be using after the installations. Select Virtual USB device-.
At the top right, click the button with a magnifying glass (Scan for new device). Select Phohe Info and then in the new tab - Scan. On the left you will see the information Phone version and Phone IMEI.
Go to the Permanent Memory tab, check the To File checkbox and click the Read button. Wait for the process to complete. The result will be saved in a file with the *.pm extension.
Launch NokiaUnlocker. Select the path to the *.pm file and click the “Define” button. At the bottom of the window you will see code blocking.