How to turn on samsung without power button. How to turn on your phone without the power button

Today we will look at all the possible reasons when a mobile phone does not respond to the power button and your options for what to do in such a situation. This set of circumstances, although unpleasant, is not hopeless.

Such cases occur quite often, especially with the growing popularity of low-budget smartphones, so we will review how to fix the problem at home, without going to a workshop.

First you need to determine what caused the breakdown. If your mobile phone gets wet and the button does not respond to pressing, you should immediately disassemble the gadget and dry it with a hairdryer.

If the device turns off unexpectedly, you can resuscitate it by long pressing the Power button.

Perhaps the system crashed and the phone turned off the OS. If the key was damaged after a fall from any height or simply due to frequent use of the gadget, then you should not immediately run for a new device or look for the nearest repair service center. We will give several ways to restore the device without using this button.

Launch without the Power button

First, let's look at whether it is possible to start the gadget without using the power key. If the power button is faulty, but the Android device is turned on, try connecting it to the power cord and pressing the volume control key. Maybe it will be re-launched even then.

Turn on Android if the phone is in sleep mode

In the case when the smartphone is working, but is in sleep or standby mode, you can enter the context menu even with a broken start button quite simply. In this case, the main thing is to prevent the battery from being completely discharged:

• It’s trivial to put your mobile phone on charge.
• Double-click on the screen; however, this operation is not supported by all devices.
• Hold down the Home button for a few seconds, if it exists on your device.
• Dial your number from any other smartphone.

If the mobile is turned off, you can also put it on charge first. Some operating systems start when voltage is present.

If the desired effect is not obtained, you can try holding down both the volume up and down keys, which will help launch the gadget reboot menu.

Switching on via PC

The following method will tell you how to start your phone without the power key. To do this, you need to connect your Android to your computer, install on your computer the program for flashing touchscreen smartphones Android Debug Bridge, or ADV for short, and through it, by entering “adb reboot” in the command line, check the reaction of the mobile phone to charging via the connected USB cable.

Perhaps this will unlock the gadget without using Power. The only condition is that the “debugging via usb” function must be enabled on the device in the settings. In addition to rebooting, this utility opens root rights and allows you to reflash the phone as a whole.

A simpler version is the ADB Run program. It will also help you restart the gadget. To configure Android through this utility, you need to follow these steps:

1. Connect a computer with a faulty smartphone.
2. Download and open the ADB Run window.
3. In the window that opens, put the Reboot Device command. To do this, enter the number “4” in the appropriate field.
4. Start a restart by selecting the Reboot function.

Special utilities

To configure your smartphone to work even with a broken power key, you can install one of the useful applications. In this article we will present the most common programs and their methods for restoring a faulty phone.

Gravity Screen - On/Off

This program will lock the device when it is left unattended on any flat surface for a long time, and will turn on the device as soon as you move or lift it.

Power button to Volume Button

A wonderful program that, if a breakdown occurs, simply transfers the on/off function to the volume control key.

Conclusion

If the above methods did not work, you were unable to unlock your smartphone, and it continues to refuse to work, then it is better to contact the service and not take risks. After the repair is completed, do not forget to install a high-quality antivirus, especially if you often go online.

Let's hope that our tips will help you understand the situation, because unlocking is, of course, an important element in the life of a smartphone, helping to work in safe mode. After reading this article, let its failure not confuse you and you can easily cope with the problem that has arisen.

Video

Sometimes users complain that the power button on their phone does not work. Why does this happen? How to fix the situation? How dangerous is this phenomenon? All this will be discussed further below. It's actually simple to understand. Especially if the power button is to blame.

Battery

The first scenario occurs quite often. Moreover, it has nothing to do with the breakdown. Why doesn't the power button on my phone work? The culprit may be the device's ordinary battery. The thing is that insufficient battery charge renders the smartphone inoperative.

Because of this, it turns out that the power button does not work. Actually this is not true. It is enough to turn on the phone to the network for a few minutes, and then try again to work with the equipment. If the problem lies in a low battery charge, then everything will work.

Real damage

But this is just the beginning. In fact, many users confuse situations in which the power button on their phone does not work, and when the device simply does not turn on. In principle, the result is the same - the gadget becomes a useless piece of plastic and iron.

In some cases, the power button may actually break. This is a very common problem. It occurs mainly among those who either work carelessly with the device or use it for a long time. It's all due to normal wear and tear.

If the problem really is a breakdown, you can repair your mobile phone. Repairs are carried out in specialized centers. As a rule, for a fee you can pick up a working smartphone with normally functioning buttons.

Sometimes equipment cannot be repaired. What then? If the power button on your phone is broken, so much so that it cannot be restored to functionality, you will have to buy a new gadget. Fortunately, such a situation does not occur too often. Usually, you can easily contact a service center to have your phone repaired.

Software problems

Is the power button on your phone not working? As already mentioned, users often confuse a malfunction of the smartphone and a breakdown of the gadget’s control buttons. The second scenario is exclusively mechanical damage. Usually they are either corrected in service centers or lead to the need to purchase a new phone.

If we consider the problem not as a failure of the power button to work, but as the fact that the smartphone itself does not work, the reasons may lie, for example, in software failures. For example, the phone settings get lost under some circumstances. Or viruses damage the gadget's OS. Then it won't turn on. Or it will constantly turn off. In this case, the power button will also not work, nor will it respond to sent commands.

If there is a suspicion of a software failure, the situation is resolved in several ways. Namely:

1. Flashing the phone. This can be done either independently or at service centers. It is better for novice users to entrust their mobile phone to professionals. Repairs, expressed by firmware, are carried out in a few minutes. The gadget will work at full capacity.
2. Configuring already turned on equipment. Typically, users themselves carry out the so-called “Hard Reset”, and then begin to adjust the operation of the device. The power button should work after resetting the phone parameters to the initial level.
3. Checking your smartphone for viruses and further getting rid of malware. If the gadget has already turned off and it turns out that the power button on the phone does not work, it is best to take the equipment to a service center. They will quickly help you rectify the situation.

All this helps with failures caused by the phone's operating system or its software. But that's not all. It is necessary to get acquainted with other options for the development of events.

External influence

Why else might the power button on your phone not seem to work? It is likely that the device was subject to negative external influence. And this led to either system failures or hardware damage. Because of this, the power button may actually not work.

For example, the phone was dropped into water. Or the gadget fell from a height to the floor. These reasons lead to damage to the smartphone. And it stops working. In the first case, you need to disassemble the phone as soon as possible and dry its components. After that, assemble and try to turn it on. In the second case, it is better to immediately contact the service center if you discover a malfunction of the phone’s navigation buttons.

Results

What conclusions can be drawn? The power button on the phone often does not work because the gadget itself refuses to function. The most common reasons for this behavior are:

• mechanical damage;
• manufacturing defect;
• external negative impact on the phone;
• low battery charge;
• viruses on the phone;
• system failure;
• need for flashing.

If you find problems turning on the phone, it is recommended to charge the battery, try to use the smartphone again, and then take the device to a service center. This is the most reliable way to repair equipment.

Even the most expensive smartphone is not immune from breakdowns. During operation, the device may fall to the floor, suffer from water, or receive other mechanical damage.

As a result, individual controls may fail.

Practice shows that one of the most vulnerable points of a Samsung smartphone is the power (on/off) button.

If the main The phone button is broken or no longer responds to pressing, only a master can help correct the situation. However, you can use your smartphone for some time without the power button working.

Turning on Samsung with a broken button

There are several options for solving this problem, here are the most effective of them:

1. We put the smartphone on charge. Many models of Samsung phones and other manufacturers turn on when connected to a charger. The first thing you can do in this case is Put the device on charge and try to hold down the volume key.

If you don’t have a wall charger at hand, but have a laptop and a USB cable, you can connect your phone to your computer.

2. If the first method does not work, try press the volume button to the “-“ position, the “home” button and, while holding these two buttons pressed, connect the power cable (do not release the buttons at all times!). After a few seconds (about 5-7) a warning menu should appear on the screen.

Need to Remove the back cover from the device and insert the power cable. When the second battery indicator appears, you need to quickly unplug the power cable and also quickly remove and insert the battery. The phone will begin to reboot.

VIDEO INSTRUCTION

Turn on Samsung without a button using the Mobile Uncle application

It is not very convenient to turn on a Samsung phone every time without the power button using all the intricate methods listed above, so after a successful launch, we recommend installing the special application Mobile uncle tools 2017 (Mobile Uncle) on your smartphone.

With this universal multi-tool, you can do almost anything with your Android device, completely changing the settings and functionality of the working buttons.

The Mobile Uncle application works with any device based on MTK processors.

There is another application - Power button to Volume Button (available for free on the Play Store) - it is designed specifically for this case. With its help, you can transfer the function of the power button to the speaker volume keys.

There are only two active items in the application menu: Boot and Screen Off. Just check the box next to “Boot” and the smartphone will turn on using the volume rocker.

In devices running Android OS, the “power” button performs two functions – turning the device on and off, as well as activating and unlocking. A faulty power button does not allow you to fully use the device, which is a direct route to the service center. If there is no workshop nearby or it is important to postpone the repair to a later date, in the article you will learn how to turn on the phone without the power button.

The phone is turned off, the power button does not work

First, let's consider the situation when the device is completely turned off, the power button does not work and we need to start the OS.

Method 1: Connect to charger

When you connect the power cable, charging will begin in the off state. However, some models load the system at the same time. If this does not happen to turn on the phone, try connecting the device to the computer.

Method 2: connect to the charger and hold down both volume control buttons

When installing the power cable, press and hold both volume buttons until the boot menu appears - the phone will turn on, but then you will need to select a boot mode, while different phone models may offer different options.

The Motorola Razr M smartphone chosen for testing loaded into Boot mode, where you are asked to select one of the following actions: Normal PowerUP, Recovery, AP Fastboot, Factoty and BP Tools. Disconnect the cable and select one of your preferred options, such as Normal PowerUP to turn on your phone.

In my case, the smartphone loaded the system only when selecting the “Factoty” item. And when you selected “AP Fastboot,” the firmware mode was launched, where instead of booting the system, you can issue a reboot command. In this case, you will need a computer and the RSD Lite program, and you will also have to edit the file with commands when flashing the firmware, but this is only if you have a Motorola smartphone. For smartphones from other manufacturers, appropriate programs are used.

If you managed to get into Recovery mode, then select the line - “Reboot system now”. To confirm the action, you need to press the power button. And since the key is not accessible, we can only hope that the smartphone will perceive tactile pressure through the display. Third-party variations of Recovery support touch screen clicks; and from the basic recovery modes - only some. If the display does not respond and the power button does not work, then this option is eliminated.

Method 3: Wait for the alarm to turn on

Typically, the alarm clock has the ability to turn on the device to activate a previously set action, even when the phone is turned off. If such an event occurs, take a moment to go to the menu.

The phone is on but locked

To remove the screen lock, the device must be awakened, which can easily be done by an incoming call or connecting to a charger. What about on the street? Of course, it is inconvenient to connect a portable charger every time. In this case, the methods described below are suitable.

Method 1: Using a biometric authentication system

Most modern smartphones come with a built-in fingerprint sensor or allow you to set up a Face ID system. The latter, to remove the lock, uses a previously specified snapshot of the owner’s face. If you set the screen to biometric, you won't have to press the power button to unlock it. It is worth considering that some smartphones, in order to use biometric unlocking, first require you to wake up the device with the power button.

Method 2: Turn on the phone with the MiKey button

The accessory, installed in the headset jack, contains a customizable button. In the application settings, a parameter is specified - the number and duration of pressing to lock and unlock the screen. This method will be a good alternative if the device does not have a fingerprint scanner or if you need to wake up the smartphone to use the sensor. The button can also be used to wake up the device and then unlock it using internal means or biometrics.

Method 3: Turn on the phone using gestures

Some smartphones allow you to launch applications when you enter the gesture of the corresponding letter - C, V, W or M. After that, the specified program will launch, for example a calculator, which is easily minimized and does not interfere with the further use of the smartphone.

Any smartphone is a short-lived device. After several years of use, various situations arise that prevent comfortable interaction with the device.

A situation often occurs when the phone's power button fails (breaks). It jams or stops working on its own, so you have to look for workarounds to start the smartphone. At the moment, there are several ways to turn on the phone without using the power button.

1. Charger

If the smartphone is turned off, the first thing you need to do is connect it to. This may be why it does not respond to the power buttons and other actions. After connecting to charging, you need to wait a few minutes, and then hold down the power and volume buttons (or any other physical key). In some situations, this option works and the device turns on safely.

2. Connect to PC

If the smartphone is charged, then it makes sense to try connecting it to the computer via a USB cable. This option usually works for devices running the Android operating system. As a rule, direct contact with the computer is accompanied by a certain reaction from the gadget, and it turns on. If the PC does not see the phone, .

3. The smartphone is in sleep mode

If the phone is turned on, it is easier to continue interacting with it. In sleep mode, double tap on the screen of your mobile device - in some cases the display is activated. If this does not happen, you can press the mechanical “Home” button or call this smartphone.

After solving the problem of starting the device when the power button is not working, you can assign its function to another button. The appropriate software is suitable for this, for example, the Power Button to Volume Button application. In any case, in the event of a breakdown, it is better to contact a specialist so as not to aggravate the problem.

4. Recovery menu

When you connect to a charger and hold down the physical keys on some mobile devices, the system recovery menu opens. In this case, you need to select the “reboot system now” menu item, and the phone will reboot.

5.Android Debug Bridge

This method only works with gadgets whose settings are enabled. ADB is a special program that allows you to interact with a smartphone via a computer. When using this option, you need to connect the gadget to the computer on which the presented tool is installed. After opening the program, you need to enter the command cd c:\adb. , where “c” is the root folder. When the tool detects the smartphone, you need to issue the following command: adb reboot. The gadget will perform the reboot process and turn on.