Menu
homeMicrosoft

How to make a frame in Photoshop: instructions and recommendations. How to easily make a frame in Photoshop around a photo or insert a ready-made one

In a wide variety of situations, there are times when it is extremely important to make a frame on an A4 sheet. Of course, drawing by hand is no longer relevant in the 21st century. After all, there are so many available tools, in addition to a PC, thanks to which these problems can be solved in a few minutes. All you have to do is open Word, take a few consecutive steps and print. It would seem that so many actions need to be done, but laziness, because the engine of progress.

Frame in Word 2007 and 2010

Let's look at how to make a frame in Word for versions such as 2007 and 2010. The following steps should be followed:

  1. Open the tab on the top menu bar called “Page Layout”;
  1. Go to the “Page Background” subsection and click on the button called “Page Borders”;

  1. In the “Borders and Fill” window that opens, select the “Page” sub-item;

  1. In the “Type” area on the left side of the window, you should specify the appropriate “Frame” option.

  1. Next, you need to find the desired variation of the line edging for the frame. It can be a solid line, a small dotted line, a double line, a large dotted line, a hyphen with a dot, and other types of lines. This function is located slightly to the right of the previous one, also called “Type”. And with the possibility of a scrolling list of possible line types for frames.

  1. After selecting the desired line type, you can set the color and width of the frame in the boxes below. The frame can be colored and of absolutely any size.

  1. In case you need to insert a beautiful frame only on one specific page, you need to set subsequent settings. Before saving general settings for a frame, you need to specify “this section, (1st page only)” in the “Sample” subsection in the “Apply to” window.

Accordingly, if you want to apply a frame on all pages, you need to set “apply to” to “entire document”.

Create a frame using a table

The Microsoft Word text editor has many advantages. One of them is the ability to draw a frame yourself. What actions are needed for this, we will consider below.

It doesn’t matter what the frame is for, let it be the title page of an essay or report. After all, the design depends on your hand. This solution is not an example for GOST design, since it is necessary to take into account the indents on each side of the sheet. The settings of which must be specified separately.

  1. On the main top menu, you need to select the button called “Bottom Border” in the “Paragraph” subsection.

  1. From the list presented, click on the line “Draw table”.

  1. The cursor will change from a cursor to a pencil. Place the pencil in the desired location and pull to the required size and release. It will turn out to be a kind of large table cell. Creating a frame for text around any size is not difficult.

Frame with patterns

Creating greeting cards will require a little time and a creative approach to design. You can make a beautiful frame in Word using the “Shapes” button. The following steps need to be taken:

  1. Go to the “Insert” tab in the “Illustrations” subsection;
  1. Click on the “Shapes” button and select the most suitable shape;

  1. Place the cursor on a blank sheet of paper and, holding down the right mouse button, begin drawing a figure to a size that is acceptable;

Attention!

To make the curly frame proportionally even, hold down the Shift key.

  1. Next, to add a verse or congratulation, you need to right-click on the shape and select the line “Add text”;

  1. By clicking on the curly frame, you can apply different styles in the “Drawing Tools” “Format” tab. From outline, glow, shadow to filling a shape with a gradient, pattern or texture.

Thanks to the extensive capabilities of this editor, you can make any kind of postcard or congratulatory letter. Add small patterns around the text, add several types of frames, and a new mood for congratulations has already been created. In such simple ways you can surprise your loved ones. For educational purposes, you can choose an easy option for completing your coursework.

How to make text appear in a frame in Word?

Sometimes we want to highlight some parts of the text in a special way, and then we start looking on the Internet for information on how, for example, to highlight a passage with a certain color, how to change the font or add a frame.

Today we will talk about the latter.

There are quite a few ways to do this. Most of them are relevant for all versions of Microsoft Word and they are all done as simply as possible.

In this case, you don’t need to know a lot about the design of this program or even be a more or less advanced user; you just need to follow the instructions given below.

Method No. 1. Standard

In short, this method is to simply select the text, find the item “ Borders and Shading» and use it to make a frame around the selected fragment.

In more detail, it all looks like this:

  • We select a specific piece of text by left-clicking at the beginning and, without releasing it, at the end.
  • After that, go to the “Page Layout” tab in Word 2010 and 2007, to the “Design” tab in Word 2013 and to the “Format” menu in Word 2003.
  • Click on the “Page Borders” item in Word 2007, 2010 and 2013 and on the “Borders and Shading” item in Word 2003.

A window that is the same for all versions will open “ Borders and Shading"(only the design of the window itself will differ).

  • Go to the tab " Border».

Important: When this window opens, the “Page” tab automatically opens. They have the same interface, but the first one will perform certain actions for a selected piece of text, and the second one will perform certain actions for the entire page.

In the open “Border” tab, select the “frame” type.

Click "OK" at the bottom of the window - and you're done.

This is interesting: Try experimenting with the type of frame borders. There is a special section for this, which is called “Type”.

As you can see, there you can select a frame with borders in the form of a dot-dash, dash-dash, and so on. Also in this window you can select the color of the lines, their width and many other parameters.

And the frame itself can be made voluminous, with a shadow, colorless, or made special in other ways.

This window will definitely be useful to people who often work with Word.

Method No. 2. Using tables

This method also works in absolutely all versions of Microsoft Word and does not cause any particular difficulties.

It consists in first creating a table with one cell and one column, writing some text in it, and then simply “adjusting” the size of the table to the size of the text.

In more detail, in Microsoft Word 2007, 2010 and 2013 all this is done as follows:

  • Go to the “Insert” tab on the top panel of the program;
  • Click the “Table” button;
  • We aim at the grid so that only one square is selected. Click on it.

  • The 1×1 table we need will appear on the screen.
  • Hover the mouse cursor over it, left-click and enter the desired text.
  • We move the mouse cursor over the boundaries of this table, we see that it takes the form of a line with arrows on both sides. We move them in such a way as to reduce the size of the table.

In Microsoft Word 2003 the same thing happens like this:

  • On the top panel, select the “Table” menu;
  • In the drop-down list, move the cursor to the “Insert” item, then again to “Table”
  • A window will open where you need to specify “1” next to the words “Number of columns” and “Number of rows”;
  • Further actions are exactly the same - click on the table, insert the desired text there and change its size using the mouse cursor.

In principle, you can create tables in this way in later versions of Microsoft Word, but there is already a more convenient method, which was described above.

Method No. 3. Using shapes

As you know, Microsoft Word has the ability to insert all kinds of rectangles, circles, cones, and the like into a document. In all versions the sets of figures are identical.

The essence of the method is to create a regular square and add text to it.

In fact, we are creating the same 1x1 table, only in the form of a picture. IN Microsoft Word 2007, 2010 and 2013 This method involves the following steps:

  • Go to the “Insert” tab;
  • Select the item “Shapes”;
  • Select a regular rectangle. While drawing a rectangle, the user can immediately edit its dimensions;
  • When the rectangle is placed on the page, right-click on the rectangle and select “Insert text”;
  • We write the required text.

IN Microsoft Word 2003 this whole process looks a little different. In this program, the list of shapes is simply located in a different place.

But the figures themselves, as mentioned above, are exactly the same as in later versions. There, to add a rectangle, you need to do the following:

  • On the bottom panel, hover your mouse over the “AutoShapes” item.
  • In the drop-down menu, select “Basic Shapes”.
  • In the list, just click on the rectangle (number 1 in the figure below).
  • Further work with the figure occurs in exactly the same way as in later versions of Word - expand or narrow it, right-click, select “Add text” and insert the desired inscription.

There is another way which is to simply click on the rectangle on the bottom panel and continue working with it in the same way.

This option is indicated by number 2 in the figure below.

As you can see, all these methods are extremely simple and should not cause any particular difficulties. To find the menu items you need, you don’t need to spend a long time walking through Word tabs and looking for what you need.

But the result will be very impressive.

Method No. 4. Caption Tool

Microsoft Word 2007, 2010, and 2013 have a Text Box tool. It is located in the "Insert" tab.

To make text in a frame using such a tool, you must perform the following steps:

  • Open the “Insert” tab;
  • Click on the “Inscription” button.
  • Select one of the inscription styles.

As you can see, the very first style is a regular frame. Click on it, insert the text and click on an empty space on the page.

After this, the frame can be edited in the traditional way - change sizes, move, and so on.

As you can see, in this menu there are other options for inserting text - for example, there is a very impressive inscription in the form of a panel on the side. Word 2003 also has such a tool.

The whole process of using it looks like this:

  • Click on the “Insert” menu;
  • In it, select the “Inscription” item.

In any case, using this tool is very convenient.

Most of us work with such an indispensable program as Microsoft Word. It is irreplaceable due to the fact that it provides us with limitless flights of imagination in document design: drawings, tables, fonts, diagrams, SmartArt - everything your heart desires. It would seem that we have long learned to work in this editor, but sometimes we are faced with the fact that due to ignorance we are unable to implement what we ultimately want to achieve. For example, many still do not know how to make a frame around text or around a page in Word. There is nothing wrong with this, especially since it is so easy to fix! Read the article and remember.

Perhaps you will find it useful:

  • , starting from the second (without title page)
  • , if it is not deleted

How to make a frame around text in Word?

Some manage to frame the text using a table of one cell. The result seems to be the same, but the principle itself remains incorrect. The main disadvantage of creating a frame around text from a table is that the user is deprived of the opportunity to choose the pattern and color of the frame, and this is the most important thing. This is exactly what gives all the beauty to the document. Therefore, in order to make a frame around the text in Word according to your mind, just a few necessary clicks are enough:

  1. Next “Page Borders”
  2. In the window that appears, select the “Border” tab. Customize to taste.
  3. Apply to paragraph
  4. Save

There is also another option that allows you to open a window in which you can also make a frame around the text in Word. It's even simpler. In general, the principle of operation does not change, just for general education it can be shown: in the “Home” tab, click on the symbolic “Borders and Fill” tab. And then everything is the same as described above.

How to make a frame around the edges of a page in Word?

To make a frame around the edges of the page in Word, one minute is enough. Just as when creating a frame around the text, we call up the “Page Borders” settings window:

  1. Select the text you want to frame
  2. Click on the “Page Layout” tab
  3. Next “Page Borders”
  4. In the window that appears, select the central “Page” tab.
  5. Customize at your own discretion
  6. We apply it depending on the need: to the entire document (then all pages of the document will be in a frame) or to one page. Experiment.
  7. Save by clicking “OK”

How to make a beautiful frame in Word?

With the same success, in addition to classic frames, you can use more beautiful, interesting frame options in Word. They are called graphic due to the small drawings that will frame the page. Of course, such frames are not for official documents, but for thematic cases they are perfect. To make a beautiful frame in Word, we also go to the “Page Borders” parameters, in the window that appears, we remain on the “Page” tab. At the bottom there will be a “Drawing”, where in the corresponding field you select the frame you like.

Gone are the days when people only read textual information. Today, every computer user can independently type texts, edit them and print them. There are auxiliary programs for this, for example Microsoft Word 2010. But working with this program requires special skills. Our article will tell you how to make a frame in Worde.

So, to work you will need a simple program included in the Microsoft Office suite. The text editing utility is called Microsoft Word 2010.

What is a frame and what is it for? A frame is a beautiful frame around text or a blank page that creates some volume on the page. Most often, frames are used by designers. Thanks to the instructions in our article, you will also learn how to make frames of various shapes and colors. So, let's begin.

Create a beautiful frame in Word

To begin, open a Word 2013 document. It is advisable to have a ready-made text fragment of the page in which you want to make the appropriate changes. Next, go to the “ Page layout».

In the center, in the upper corner, click on the icon " Page Borders" A window will open in front of you “ Borders and Shading" There are many different settings here. In this case, we only need those that are associated with the frames. Therefore, we will tell you how to make a frame for the entire text of the page.

Select the "Frame" type and then set " Apply to entire document" To confirm the actions performed, click " OK"at the bottom of the window.

Thus, we received the simplest stroke for the entire page of the document. By the same analogy, instead of a regular frame, you can make a frame in the form of drawings.

The following operations will complicate the shape of the frames. To do this, let's try to create a colored paragraph outline. The initial steps are the same: open the document, go to the “ Page layout" Place the cursor on the paragraph you want to format. In the window that opens, go to the “ Border».

Notice the bottom right corner, which shows that any changes will be applied to the paragraph. On this tab you can select.

  • No – means that there will be no frame;
  • frame;
  • shadow;
  • volumetric;
  • another.

Note that Word has a very convenient preview window. All changes you make to the document are immediately visible in the small diagram on the right.

Select " Frame"(to do this, left-click on the corresponding icon).

Choose a color. To do this, in the section " Color", click on the small triangle. In the menu that opens, select the color you need (for example blue), and click on it with the mouse.

In chapter " Width» select size in points. To do this, in the section " Width» Click on the appropriate item (for example, 3 pt). Notice the changes on the right. If the thickness and color of the frame suits you, then click the " OK", located at the bottom of the window.

All! The paragraph that you selected with the cursor will be transformed into a beautiful stroke of the color and thickness you need.

If you want to frame a large piece of text in the same way, then simply select the text you need with the mouse.

Then, on the tab " Page layout", click the icon " Page Borders" Go to the " Border", and then specify the type - " Frame».

Select any color and width, then click the " OK».

Thus, there will be another option. Experiment with colors and frame thickness. As a result, any of your pages or individual paragraphs will have a beautiful design in the form of a frame.

How to make a frame in word? It often happens that you need to quickly create some kind of greeting card or simply write something in a beautiful frame. You can create a beautiful card in Photoshop or Gimp, but many have not even heard of these programs and do not have them at hand. And then they still need to be studied, and you need a postcard or frame for text right now. This is where the Microsoft Word text editor will come to our aid again. It is perfectly possible to create any postcard no worse than a typographic one. A good place to start would be to make a nice frame. This is what we will talk about now, and you will see that it is easy to do using Word.

We have already looked at some techniques for working in Word, such as changing page color, how to create a brochure, how to create a template, how to place a picture, how to work with dividing lines.

All this will be useful to you when creating graphics and postcards. Today we will learn how to make beautiful frames. For this we don’t need anything other than the Word text editor. It has everything we need.

How to make a frame inWord

In order to create a beautiful frame in Word 2003, open a new document. Enter the menu – Format – Borders and Shading… .

The window “ Borders and Shading ».

Go to the " Page" Select the frame type on the left. In the center of the window, select the color of the future frame and the design. On the sample you will see the appearance of your frame.

Experiment and find what you like. After selecting, click the button OK"and your frame is ready. Don't forget to save it.

To create a beautiful frame in Word 2007/2010 you need to open the menu Page layout and in the block Page background choose Page Borders .